467 lines
15 KiB
C
467 lines
15 KiB
C
/******************************************************************************
|
|
* Copyright 2013-2014 Espressif Systems (Wuxi)
|
|
*
|
|
* FileName: pwm.c
|
|
*
|
|
* Description: pwm driver
|
|
*
|
|
* Modification history:
|
|
* 2014/5/1, v1.0 create this file.
|
|
*******************************************************************************/
|
|
#include "platform.h"
|
|
|
|
#include "ets_sys.h"
|
|
#include "os_type.h"
|
|
#include "osapi.h"
|
|
#include "gpio.h"
|
|
#include "hw_timer.h"
|
|
|
|
#include "user_interface.h"
|
|
#include "driver/pwm.h"
|
|
|
|
// #define PWM_DBG os_printf
|
|
#define PWM_DBG
|
|
|
|
// Enabling the next line will cause the interrupt handler to toggle
|
|
// this output pin during processing so that the timing is obvious
|
|
//
|
|
// #define PWM_DBG_PIN 13 // GPIO7
|
|
|
|
#ifdef PWM_DBG_PIN
|
|
#define PWM_DBG_PIN_HIGH() GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, 1 << PWM_DBG_PIN)
|
|
#define PWM_DBG_PIN_LOW() GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1 << PWM_DBG_PIN)
|
|
#else
|
|
#define PWM_DBG_PIN_HIGH()
|
|
#define PWM_DBG_PIN_LOW()
|
|
#endif
|
|
|
|
LOCAL struct pwm_single_param pwm_single_toggle[2][PWM_CHANNEL + 1];
|
|
LOCAL struct pwm_single_param *pwm_single;
|
|
|
|
LOCAL struct pwm_param pwm;
|
|
|
|
// LOCAL uint8 pwm_out_io_num[PWM_CHANNEL] = {PWM_0_OUT_IO_NUM, PWM_1_OUT_IO_NUM, PWM_2_OUT_IO_NUM};
|
|
LOCAL int8 pwm_out_io_num[PWM_CHANNEL] = {-1, -1, -1, -1, -1, -1};
|
|
|
|
LOCAL uint8 pwm_channel_toggle[2];
|
|
LOCAL uint8 *pwm_channel;
|
|
|
|
// Toggle flips between 1 and 0 when we make updates so that the interrupt code
|
|
// cn switch cleanly between the two states. The cinterrupt handler uses either
|
|
// the pwm_single_toggle[0] or pwm_single_toggle[1]
|
|
// pwm_toggle indicates which state should be used on the *next* timer interrupt
|
|
// freq boundary.
|
|
LOCAL uint8 pwm_toggle = 1;
|
|
LOCAL volatile uint8 pwm_current_toggle = 1;
|
|
LOCAL uint8 pwm_timer_down = 1;
|
|
|
|
LOCAL uint8 pwm_current_channel = 0;
|
|
|
|
LOCAL uint16 pwm_gpio = 0;
|
|
|
|
LOCAL uint8 pwm_channel_num = 0;
|
|
|
|
LOCAL void ICACHE_RAM_ATTR pwm_tim1_intr_handler(os_param_t p);
|
|
#define TIMER_OWNER ((os_param_t) 'P')
|
|
|
|
LOCAL void ICACHE_FLASH_ATTR
|
|
pwm_insert_sort(struct pwm_single_param pwm[], uint8 n)
|
|
{
|
|
uint8 i;
|
|
|
|
for (i = 1; i < n; i++) {
|
|
if (pwm[i].h_time < pwm[i - 1].h_time) {
|
|
int8 j = i - 1;
|
|
struct pwm_single_param tmp;
|
|
|
|
os_memcpy(&tmp, &pwm[i], sizeof(struct pwm_single_param));
|
|
|
|
while (tmp.h_time < pwm[j].h_time) {
|
|
os_memcpy(&pwm[j + 1], &pwm[j], sizeof(struct pwm_single_param));
|
|
j--;
|
|
if (j < 0) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
os_memcpy(&pwm[j + 1], &tmp, sizeof(struct pwm_single_param));
|
|
}
|
|
}
|
|
}
|
|
|
|
// Returns FALSE if we cannot start
|
|
bool ICACHE_FLASH_ATTR
|
|
pwm_start(void)
|
|
{
|
|
uint8 i, j;
|
|
PWM_DBG("--Function pwm_start() is called\n");
|
|
PWM_DBG("pwm_gpio:%x,pwm_channel_num:%d\n",pwm_gpio,pwm_channel_num);
|
|
PWM_DBG("pwm_out_io_num[0]:%d,[1]:%d,[2]:%d\n",pwm_out_io_num[0],pwm_out_io_num[1],pwm_out_io_num[2]);
|
|
PWM_DBG("pwm.period:%d,pwm.duty[0]:%d,[1]:%d,[2]:%d\n",pwm.period,pwm.duty[0],pwm.duty[1],pwm.duty[2]);
|
|
|
|
// First we need to make sure that the interrupt handler is running
|
|
// out of the same set of params as we expect
|
|
while (!pwm_timer_down && pwm_toggle != pwm_current_toggle) {
|
|
os_delay_us(100);
|
|
}
|
|
if (pwm_timer_down) {
|
|
pwm_toggle = pwm_current_toggle;
|
|
}
|
|
|
|
uint8_t new_toggle = pwm_toggle ^ 0x01;
|
|
|
|
struct pwm_single_param *local_single = pwm_single_toggle[new_toggle];
|
|
uint8 *local_channel = &pwm_channel_toggle[new_toggle];
|
|
|
|
// step 1: init PWM_CHANNEL+1 channels param
|
|
for (i = 0; i < pwm_channel_num; i++) {
|
|
uint32 us = pwm.period * pwm.duty[i] / PWM_DEPTH;
|
|
local_single[i].h_time = US_TO_RTC_TIMER_TICKS(us);
|
|
PWM_DBG("i:%d us:%d ht:%d\n",i,us,local_single[i].h_time);
|
|
local_single[i].gpio_set = 0;
|
|
local_single[i].gpio_clear = 1 << pin_num[pwm_out_io_num[i]];
|
|
}
|
|
|
|
local_single[pwm_channel_num].h_time = US_TO_RTC_TIMER_TICKS(pwm.period);
|
|
local_single[pwm_channel_num].gpio_set = pwm_gpio;
|
|
local_single[pwm_channel_num].gpio_clear = 0;
|
|
PWM_DBG("i:%d period:%d ht:%d\n",pwm_channel_num,pwm.period,local_single[pwm_channel_num].h_time);
|
|
// step 2: sort, small to big
|
|
pwm_insert_sort(local_single, pwm_channel_num + 1);
|
|
|
|
*local_channel = pwm_channel_num + 1;
|
|
PWM_DBG("1channel:%d,single[0]:%d,[1]:%d,[2]:%d,[3]:%d\n",*local_channel,local_single[0].h_time,local_single[1].h_time,local_single[2].h_time,local_single[3].h_time);
|
|
// step 3: combine same duty channels (or nearly the same duty). If there is
|
|
// under 2 us between pwm outputs, then treat them as the same.
|
|
for (i = pwm_channel_num; i > 0; i--) {
|
|
if (local_single[i].h_time <= local_single[i - 1].h_time + US_TO_RTC_TIMER_TICKS(2)) {
|
|
local_single[i - 1].gpio_set |= local_single[i].gpio_set;
|
|
local_single[i - 1].gpio_clear |= local_single[i].gpio_clear;
|
|
|
|
for (j = i + 1; j < *local_channel; j++) {
|
|
os_memcpy(&local_single[j - 1], &local_single[j], sizeof(struct pwm_single_param));
|
|
}
|
|
|
|
(*local_channel)--;
|
|
}
|
|
}
|
|
PWM_DBG("2channel:%d,single[0]:%d,[1]:%d,[2]:%d,[3]:%d\n",*local_channel,local_single[0].h_time,local_single[1].h_time,local_single[2].h_time,local_single[3].h_time);
|
|
// step 4: cacl delt time
|
|
for (i = *local_channel - 1; i > 0; i--) {
|
|
local_single[i].h_time -= local_single[i - 1].h_time;
|
|
}
|
|
|
|
// step 5: last channel needs to clean
|
|
local_single[*local_channel-1].gpio_clear = 0;
|
|
|
|
// step 6: if first channel duty is 0, remove it
|
|
if (local_single[0].h_time == 0) {
|
|
local_single[*local_channel - 1].gpio_set &= ~local_single[0].gpio_clear;
|
|
local_single[*local_channel - 1].gpio_clear |= local_single[0].gpio_clear;
|
|
|
|
for (i = 1; i < *local_channel; i++) {
|
|
os_memcpy(&local_single[i - 1], &local_single[i], sizeof(struct pwm_single_param));
|
|
}
|
|
|
|
(*local_channel)--;
|
|
}
|
|
|
|
// Make the new ones active
|
|
pwm_toggle = new_toggle;
|
|
|
|
// if timer is down, need to set gpio and start timer
|
|
if (pwm_timer_down == 1) {
|
|
pwm_channel = local_channel;
|
|
pwm_single = local_single;
|
|
pwm_current_toggle = pwm_toggle;
|
|
// start
|
|
gpio_output_set(local_single[0].gpio_set, local_single[0].gpio_clear, pwm_gpio, 0);
|
|
|
|
// yeah, if all channels' duty is 0 or 255, don't need to start timer, otherwise start...
|
|
if (*local_channel != 1) {
|
|
PWM_DBG("Need to setup timer\n");
|
|
if (!platform_hw_timer_init(TIMER_OWNER, NMI_SOURCE, FALSE)) {
|
|
return FALSE;
|
|
}
|
|
pwm_timer_down = 0;
|
|
platform_hw_timer_set_func(TIMER_OWNER, pwm_tim1_intr_handler, 0);
|
|
platform_hw_timer_arm_ticks(TIMER_OWNER, local_single[0].h_time);
|
|
} else {
|
|
PWM_DBG("Timer left idle\n");
|
|
platform_hw_timer_close(TIMER_OWNER);
|
|
}
|
|
} else {
|
|
// ensure that all outputs are outputs
|
|
gpio_output_set(0, 0, pwm_gpio, 0);
|
|
}
|
|
|
|
#ifdef PWM_DBG_PIN
|
|
// Enable as output
|
|
gpio_output_set(0, 0, 1 << PWM_DBG_PIN, 0);
|
|
#endif
|
|
|
|
PWM_DBG("3channel:%d,single[0]:%d,[1]:%d,[2]:%d,[3]:%d\n",*local_channel,local_single[0].h_time,local_single[1].h_time,local_single[2].h_time,local_single[3].h_time);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_set_duty
|
|
* Description : set each channel's duty params
|
|
* Parameters : uint8 duty : 0 ~ PWM_DEPTH
|
|
* uint8 channel : channel index
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
pwm_set_duty(uint16 duty, uint8 channel)
|
|
{
|
|
uint8 i;
|
|
for(i=0;i<pwm_channel_num;i++){
|
|
if(pwm_out_io_num[i] == channel){
|
|
channel = i;
|
|
break;
|
|
}
|
|
}
|
|
if(i==pwm_channel_num) // non found
|
|
return;
|
|
|
|
if (duty < 1) {
|
|
pwm.duty[channel] = 0;
|
|
} else if (duty >= PWM_DEPTH) {
|
|
pwm.duty[channel] = PWM_DEPTH;
|
|
} else {
|
|
pwm.duty[channel] = duty;
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_set_freq
|
|
* Description : set pwm frequency
|
|
* Parameters : uint16 freq : 100hz typically
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
pwm_set_freq(uint16 freq, uint8 channel)
|
|
{
|
|
if (freq > PWM_FREQ_MAX) {
|
|
pwm.freq = PWM_FREQ_MAX;
|
|
} else if (freq < 1) {
|
|
pwm.freq = 1;
|
|
} else {
|
|
pwm.freq = freq;
|
|
}
|
|
|
|
pwm.period = PWM_1S / pwm.freq;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_set_freq_duty
|
|
* Description : set pwm frequency and each channel's duty
|
|
* Parameters : uint16 freq : 100hz typically
|
|
* uint16 *duty : each channel's duty
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
LOCAL void ICACHE_FLASH_ATTR
|
|
pwm_set_freq_duty(uint16 freq, uint16 *duty)
|
|
{
|
|
uint8 i;
|
|
|
|
pwm_set_freq(freq, 0);
|
|
|
|
for (i = 0; i < PWM_CHANNEL; i++) {
|
|
// pwm_set_duty(duty[i], i);
|
|
if(pwm_out_io_num[i] != -1)
|
|
pwm_set_duty(duty[i], pwm_out_io_num[i]);
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_get_duty
|
|
* Description : get duty of each channel
|
|
* Parameters : uint8 channel : channel index
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
uint16 ICACHE_FLASH_ATTR
|
|
pwm_get_duty(uint8 channel)
|
|
{
|
|
uint8 i;
|
|
for(i=0;i<pwm_channel_num;i++){
|
|
if(pwm_out_io_num[i] == channel){
|
|
channel = i;
|
|
break;
|
|
}
|
|
}
|
|
if(i==pwm_channel_num) // non found
|
|
return 0;
|
|
|
|
return pwm.duty[channel];
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_get_freq
|
|
* Description : get pwm frequency
|
|
* Parameters : NONE
|
|
* Returns : uint16 : pwm frequency
|
|
*******************************************************************************/
|
|
uint16 ICACHE_FLASH_ATTR
|
|
pwm_get_freq(uint8 channel)
|
|
{
|
|
return pwm.freq;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_period_timer
|
|
* Description : pwm period timer function, output high level,
|
|
* start each channel's high level timer
|
|
* Parameters : NONE
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
LOCAL void ICACHE_RAM_ATTR
|
|
pwm_tim1_intr_handler(os_param_t p)
|
|
{
|
|
(void)p;
|
|
|
|
PWM_DBG_PIN_HIGH();
|
|
|
|
int offset = 0;
|
|
|
|
while (1) {
|
|
if (pwm_current_channel >= (*pwm_channel - 1)) {
|
|
pwm_single = pwm_single_toggle[pwm_toggle];
|
|
pwm_channel = &pwm_channel_toggle[pwm_toggle];
|
|
pwm_current_toggle = pwm_toggle;
|
|
|
|
gpio_output_set(pwm_single[*pwm_channel - 1].gpio_set,
|
|
pwm_single[*pwm_channel - 1].gpio_clear,
|
|
0,
|
|
0);
|
|
|
|
pwm_current_channel = 0;
|
|
|
|
if (*pwm_channel == 1) {
|
|
pwm_timer_down = 1;
|
|
break;
|
|
}
|
|
} else {
|
|
gpio_output_set(pwm_single[pwm_current_channel].gpio_set,
|
|
pwm_single[pwm_current_channel].gpio_clear,
|
|
0, 0);
|
|
|
|
pwm_current_channel++;
|
|
}
|
|
|
|
int next_time = pwm_single[pwm_current_channel].h_time;
|
|
// Delay now holds the time (in ticks) since when the last timer expiry was
|
|
PWM_DBG_PIN_LOW();
|
|
int delay = platform_hw_timer_get_delay_ticks(TIMER_OWNER) + 4 - offset;
|
|
|
|
offset += next_time;
|
|
|
|
next_time = next_time - delay;
|
|
|
|
if (next_time > US_TO_RTC_TIMER_TICKS(4)) {
|
|
PWM_DBG_PIN_HIGH();
|
|
platform_hw_timer_arm_ticks(TIMER_OWNER, next_time);
|
|
break;
|
|
}
|
|
PWM_DBG_PIN_HIGH();
|
|
}
|
|
|
|
PWM_DBG_PIN_LOW();
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : pwm_init
|
|
* Description : pwm gpio, params and timer initialization
|
|
* Parameters : uint16 freq : pwm freq param
|
|
* uint16 *duty : each channel's duty
|
|
* Returns : void
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
pwm_init(uint16 freq, uint16 *duty)
|
|
{
|
|
uint8 i;
|
|
|
|
// PIN_FUNC_SELECT(PWM_0_OUT_IO_MUX, PWM_0_OUT_IO_FUNC);
|
|
// PIN_FUNC_SELECT(PWM_1_OUT_IO_MUX, PWM_1_OUT_IO_FUNC);
|
|
// PIN_FUNC_SELECT(PWM_2_OUT_IO_MUX, PWM_2_OUT_IO_FUNC);
|
|
// GPIO_OUTPUT_SET(GPIO_ID_PIN(PWM_0_OUT_IO_NUM), 0);
|
|
// GPIO_OUTPUT_SET(GPIO_ID_PIN(PWM_1_OUT_IO_NUM), 0);
|
|
// GPIO_OUTPUT_SET(GPIO_ID_PIN(PWM_2_OUT_IO_NUM), 0);
|
|
|
|
for (i = 0; i < PWM_CHANNEL; i++) {
|
|
// pwm_gpio |= (1 << pwm_out_io_num[i]);
|
|
pwm_gpio = 0;
|
|
pwm.duty[i] = 0;
|
|
}
|
|
|
|
pwm_set_freq(500, 0);
|
|
// pwm_set_freq_duty(freq, duty);
|
|
|
|
pwm_start();
|
|
|
|
PWM_DBG("pwm_init returning\n");
|
|
}
|
|
|
|
bool ICACHE_FLASH_ATTR
|
|
pwm_add(uint8 channel){
|
|
PWM_DBG("--Function pwm_add() is called. channel:%d\n", channel);
|
|
PWM_DBG("pwm_gpio:%x,pwm_channel_num:%d\n",pwm_gpio,pwm_channel_num);
|
|
PWM_DBG("pwm_out_io_num[0]:%d,[1]:%d,[2]:%d\n",pwm_out_io_num[0],pwm_out_io_num[1],pwm_out_io_num[2]);
|
|
PWM_DBG("pwm.duty[0]:%d,[1]:%d,[2]:%d\n",pwm.duty[0],pwm.duty[1],pwm.duty[2]);
|
|
uint8 i;
|
|
for(i=0;i<PWM_CHANNEL;i++){
|
|
if(pwm_out_io_num[i]==channel) // already exist
|
|
return true;
|
|
if(pwm_out_io_num[i] == -1){ // empty exist
|
|
pwm_out_io_num[i] = channel;
|
|
pwm.duty[i] = 0;
|
|
pwm_gpio |= (1 << pin_num[channel]);
|
|
PIN_FUNC_SELECT(pin_mux[channel], pin_func[channel]);
|
|
GPIO_REG_WRITE(GPIO_PIN_ADDR(GPIO_ID_PIN(pin_num[channel])), GPIO_REG_READ(GPIO_PIN_ADDR(GPIO_ID_PIN(pin_num[channel]))) & (~ GPIO_PIN_PAD_DRIVER_SET(GPIO_PAD_DRIVER_ENABLE))); //disable open drain;
|
|
pwm_channel_num++;
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool ICACHE_FLASH_ATTR
|
|
pwm_delete(uint8 channel){
|
|
PWM_DBG("--Function pwm_delete() is called. channel:%d\n", channel);
|
|
PWM_DBG("pwm_gpio:%x,pwm_channel_num:%d\n",pwm_gpio,pwm_channel_num);
|
|
PWM_DBG("pwm_out_io_num[0]:%d,[1]:%d,[2]:%d\n",pwm_out_io_num[0],pwm_out_io_num[1],pwm_out_io_num[2]);
|
|
PWM_DBG("pwm.duty[0]:%d,[1]:%d,[2]:%d\n",pwm.duty[0],pwm.duty[1],pwm.duty[2]);
|
|
uint8 i,j;
|
|
for(i=0;i<pwm_channel_num;i++){
|
|
if(pwm_out_io_num[i]==channel){ // exist
|
|
pwm_out_io_num[i] = -1;
|
|
pwm_gpio &= ~(1 << pin_num[channel]); //clear the bit
|
|
for(j=i;j<pwm_channel_num-1;j++){
|
|
pwm_out_io_num[j] = pwm_out_io_num[j+1];
|
|
pwm.duty[j] = pwm.duty[j+1];
|
|
}
|
|
pwm_out_io_num[pwm_channel_num-1] = -1;
|
|
pwm.duty[pwm_channel_num-1] = 0;
|
|
pwm_channel_num--;
|
|
return true;
|
|
}
|
|
}
|
|
// non found
|
|
return true;
|
|
}
|
|
|
|
bool ICACHE_FLASH_ATTR
|
|
pwm_exist(uint8 channel){
|
|
PWM_DBG("--Function pwm_exist() is called. channel:%d\n", channel);
|
|
PWM_DBG("pwm_gpio:%x,pwm_channel_num:%d\n",pwm_gpio,pwm_channel_num);
|
|
PWM_DBG("pwm_out_io_num[0]:%d,[1]:%d,[2]:%d\n",pwm_out_io_num[0],pwm_out_io_num[1],pwm_out_io_num[2]);
|
|
PWM_DBG("pwm.duty[0]:%d,[1]:%d,[2]:%d\n",pwm.duty[0],pwm.duty[1],pwm.duty[2]);
|
|
uint8 i;
|
|
for(i=0;i<PWM_CHANNEL;i++){
|
|
if(pwm_out_io_num[i]==channel) // exist
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|