MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
nodemcu-firmware/app/u8glib/u8g_dev_ssd1325_nhd27oled_b...

233 lines
9.6 KiB
C
Raw Blame History

/*
u8g_dev_ssd1325_nhd27oled_bw.c
1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
Horizontal architecture, completly rewritten
Tested with NHD-2.7-12864UCY3
Universal 8bit Graphics Library
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SSD130x Monochrom OLED Controller
SSD131x Character OLED Controller
SSD132x Graylevel OLED Controller
SSD1331 Color OLED Controller
*/
#include "u8g.h"
/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
#define WIDTH 128
#define HEIGHT 64
/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
static const uint8_t u8g_dev_ssd1325_nhd_27_12864_init_seq[] PROGMEM = {
U8G_ESC_DLY(10), /* delay 10 ms */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off, sleep mode */
0x0b3, 0x091, /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
0x0a8, 0x03f, /* multiplex ratio: 0x03f * 1/64 duty */
0x0a2, 0x04c, /* display offset, shift mapping ram counter */
0x0a1, 0x000, /* display start line */
0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */
0x0a0, 0x052, /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
0x086, /* full current range (0x084, 0x085, 0x086) */
0x0b8, /* set gray scale table */
0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
0x081, 0x070, /* contrast, brightness, 0..128, Newhaven: 0x040 */
0x0b2, 0x051, /* frame frequency (row period) */
0x0b1, 0x055, /* phase length */
0x0bc, 0x010, /* pre-charge voltage level */
0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0be, 0x01c, /* VCOMH voltage */
0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0a4, /* normal display mode */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_ssd1325_prepare_row_seq[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x015, /* column address... */
0x000, /* start at column 0 */
0x03f, /* end at column 63 (which is y == 127), because there are two pixel in one column */
0x075, /* row address... */
U8G_ESC_END /* end of sequence */
};
static void u8g_dev_ssd1325_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
{
uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
row += delta_row;
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_prepare_row_seq);
u8g_WriteByte(u8g, dev, row); /* start at the selected row */
u8g_WriteByte(u8g, dev, row+1); /* end within the selected row */
//u8g_SetAddress(u8g, dev, 0); /* instruction mode mode */
//u8g_WriteByte(u8g, dev, 0x05c); /* write to ram */
u8g_SetAddress(u8g, dev, 1); /* data mode */
}
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x0af, /* display on */
U8G_ESC_DLY(50), /* delay 50 ms */
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
U8G_ESC_END /* end of sequence */
};
static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
//case U8G_DEV_MSG_IS_BBX_INTERSECTION:
// return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg);
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t i;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t *p = pb->buf;
u8g_uint_t cnt;
cnt = pb->width;
cnt >>= 3;
for( i = 0; i < pb->p.page_height; i++ )
{
u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */
u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_SetChipSelect(u8g, dev, 0);
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
}
static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t i;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
uint8_t *p = pb->buf;
u8g_uint_t cnt;
cnt = pb->width;
cnt >>= 3;
for( i = 0; i < pb->p.page_height; i++ )
{
u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */
u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
u8g_SetChipSelect(u8g, dev, 0);
p+=cnt;
}
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_SetChipSelect(u8g, dev, 0);
break;
case U8G_DEV_MSG_SLEEP_ON:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
return 1;
}
return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf};
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
Reference in New Issue View Git Blame Copy Permalink