98 lines
2.6 KiB
Lua
98 lines
2.6 KiB
Lua
-- ***************************************************************************
|
|
-- Rotation Test
|
|
--
|
|
-- This script executes the rotation features of u8glib to test their Lua
|
|
-- integration.
|
|
--
|
|
-- Note: It is prepared for SSD1306-based displays. Select your connectivity
|
|
-- type by calling either init_i2c_display() or init_spi_display() at
|
|
-- the bottom of this file.
|
|
--
|
|
-- ***************************************************************************
|
|
|
|
-- setup I2c and connect display
|
|
function init_i2c_display()
|
|
-- SDA and SCL can be assigned freely to available GPIOs
|
|
local sda = 5 -- GPIO14
|
|
local scl = 6 -- GPIO12
|
|
local sla = 0x3c
|
|
i2c.setup(0, sda, scl, i2c.SLOW)
|
|
disp = u8g.ssd1306_128x64_i2c(sla)
|
|
end
|
|
|
|
-- setup SPI and connect display
|
|
function init_spi_display()
|
|
-- Hardware SPI CLK = GPIO14
|
|
-- Hardware SPI MOSI = GPIO13
|
|
-- Hardware SPI MISO = GPIO12 (not used)
|
|
-- Hardware SPI /CS = GPIO15 (not used)
|
|
-- CS, D/C, and RES can be assigned freely to available GPIOs
|
|
local cs = 8 -- GPIO15, pull-down 10k to GND
|
|
local dc = 4 -- GPIO2
|
|
local res = 0 -- GPIO16
|
|
|
|
spi.setup(1, spi.MASTER, spi.CPOL_LOW, spi.CPHA_LOW, 8, 8)
|
|
-- we won't be using the HSPI /CS line, so disable it again
|
|
gpio.mode(8, gpio.INPUT, gpio.PULLUP)
|
|
|
|
disp = u8g.ssd1306_128x64_hw_spi(cs, dc, res)
|
|
end
|
|
|
|
|
|
-- the draw() routine
|
|
function draw()
|
|
disp:setFont(u8g.font_6x10)
|
|
disp:drawStr( 0+0, 20+0, "Hello!")
|
|
disp:drawStr( 0+2, 20+16, "Hello!")
|
|
|
|
disp:drawBox(0, 0, 3, 3)
|
|
disp:drawBox(disp:getWidth()-6, 0, 6, 6)
|
|
disp:drawBox(disp:getWidth()-9, disp:getHeight()-9, 9, 9)
|
|
disp:drawBox(0, disp:getHeight()-12, 12, 12)
|
|
end
|
|
|
|
|
|
function rotate()
|
|
if (next_rotation < tmr.now() / 1000) then
|
|
if (dir == 0) then
|
|
disp:undoRotation()
|
|
elseif (dir == 1) then
|
|
disp:setRot90()
|
|
elseif (dir == 2) then
|
|
disp:setRot180()
|
|
elseif (dir == 3) then
|
|
disp:setRot270()
|
|
end
|
|
|
|
dir = dir + 1
|
|
dir = bit.band(dir, 3)
|
|
-- schedule next rotation step in 1000ms
|
|
next_rotation = tmr.now() / 1000 + 1000
|
|
end
|
|
end
|
|
|
|
function rotation_test()
|
|
print("--- Starting Rotation Test ---")
|
|
dir = 0
|
|
next_rotation = 0
|
|
|
|
local loopcnt
|
|
for loopcnt = 1, 100, 1 do
|
|
rotate()
|
|
|
|
disp:firstPage()
|
|
repeat
|
|
draw(draw_state)
|
|
until disp:nextPage() == false
|
|
|
|
tmr.delay(100000)
|
|
tmr.wdclr()
|
|
end
|
|
|
|
print("--- Rotation Test done ---")
|
|
end
|
|
|
|
--init_i2c_display()
|
|
init_spi_display()
|
|
rotation_test()
|