500 lines
18 KiB
Python
Executable File
500 lines
18 KiB
Python
Executable File
#!/usr/bin/env python
|
|
#
|
|
# ESP8266 ROM Bootloader Utility
|
|
# https://github.com/themadinventor/esptool
|
|
#
|
|
# Copyright (C) 2014 Fredrik Ahlberg
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify it under
|
|
# the terms of the GNU General Public License as published by the Free Software
|
|
# Foundation; either version 2 of the License, or (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful, but WITHOUT
|
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License along with
|
|
# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
|
|
# Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
from __future__ import division
|
|
from __future__ import print_function
|
|
from builtins import zip
|
|
from builtins import chr
|
|
from builtins import range
|
|
from builtins import object
|
|
from past.utils import old_div
|
|
import sys
|
|
import struct
|
|
import serial
|
|
import math
|
|
import time
|
|
import argparse
|
|
import os
|
|
import subprocess
|
|
|
|
class ESPROM(object):
|
|
|
|
# These are the currently known commands supported by the ROM
|
|
ESP_FLASH_BEGIN = 0x02
|
|
ESP_FLASH_DATA = 0x03
|
|
ESP_FLASH_END = 0x04
|
|
ESP_MEM_BEGIN = 0x05
|
|
ESP_MEM_END = 0x06
|
|
ESP_MEM_DATA = 0x07
|
|
ESP_SYNC = 0x08
|
|
ESP_WRITE_REG = 0x09
|
|
ESP_READ_REG = 0x0a
|
|
|
|
# Maximum block sized for RAM and Flash writes, respectively.
|
|
ESP_RAM_BLOCK = 0x1800
|
|
ESP_FLASH_BLOCK = 0x100
|
|
|
|
# Default baudrate. The ROM auto-bauds, so we can use more or less whatever we want.
|
|
ESP_ROM_BAUD = 115200
|
|
|
|
# First byte of the application image
|
|
ESP_IMAGE_MAGIC = 0xe9
|
|
|
|
# Initial state for the checksum routine
|
|
ESP_CHECKSUM_MAGIC = 0xef
|
|
|
|
# OTP ROM addresses
|
|
ESP_OTP_MAC0 = 0x3ff00050
|
|
ESP_OTP_MAC1 = 0x3ff00054
|
|
|
|
def __init__(self, port = 0, baud = ESP_ROM_BAUD):
|
|
self._port = serial.Serial(port, baud)
|
|
|
|
""" Read bytes from the serial port while performing SLIP unescaping """
|
|
def read(self, length = 1):
|
|
b = ''
|
|
while len(b) < length:
|
|
c = self._port.read(1)
|
|
if c == '\xdb':
|
|
c = self._port.read(1)
|
|
if c == '\xdc':
|
|
b = b + '\xc0'
|
|
elif c == '\xdd':
|
|
b = b + '\xdb'
|
|
else:
|
|
raise Exception('Invalid SLIP escape')
|
|
else:
|
|
b = b + c
|
|
return b
|
|
|
|
""" Write bytes to the serial port while performing SLIP escaping """
|
|
def write(self, packet):
|
|
buf = '\xc0'
|
|
for b in packet:
|
|
if b == '\xc0':
|
|
buf += '\xdb\xdc'
|
|
elif b == '\xdb':
|
|
buf += '\xdb\xdd'
|
|
else:
|
|
buf += b
|
|
buf += '\xc0'
|
|
self._port.write(buf)
|
|
|
|
""" Calculate checksum of a blob, as it is defined by the ROM """
|
|
@staticmethod
|
|
def checksum(data, state = ESP_CHECKSUM_MAGIC):
|
|
for b in data:
|
|
state ^= ord(b)
|
|
return state
|
|
|
|
""" Send a request and read the response """
|
|
def command(self, op = None, data = None, chk = 0):
|
|
if op:
|
|
# Construct and send request
|
|
pkt = struct.pack('<BBHI', 0x00, op, len(data), chk) + data
|
|
self.write(pkt)
|
|
|
|
# Read header of response and parse
|
|
if self._port.read(1) != '\xc0':
|
|
raise Exception('Invalid head of packet')
|
|
hdr = self.read(8)
|
|
(resp, op_ret, len_ret, val) = struct.unpack('<BBHI', hdr)
|
|
if resp != 0x01 or (op and op_ret != op):
|
|
raise Exception('Invalid response')
|
|
|
|
# The variable-length body
|
|
body = self.read(len_ret)
|
|
|
|
# Terminating byte
|
|
if self._port.read(1) != chr(0xc0):
|
|
raise Exception('Invalid end of packet')
|
|
|
|
return val, body
|
|
|
|
""" Perform a connection test """
|
|
def sync(self):
|
|
self.command(ESPROM.ESP_SYNC, '\x07\x07\x12\x20'+32*'\x55')
|
|
for i in range(7):
|
|
self.command()
|
|
|
|
""" Try connecting repeatedly until successful, or giving up """
|
|
def connect(self):
|
|
print('Connecting...')
|
|
|
|
# RTS = CH_PD (i.e reset)
|
|
# DTR = GPIO0
|
|
self._port.setRTS(True)
|
|
self._port.setDTR(True)
|
|
self._port.setRTS(False)
|
|
time.sleep(0.1)
|
|
self._port.setDTR(False)
|
|
|
|
self._port.timeout = 0.5
|
|
for i in range(10):
|
|
try:
|
|
self._port.flushInput()
|
|
self._port.flushOutput()
|
|
self.sync()
|
|
self._port.timeout = 5
|
|
return
|
|
except:
|
|
time.sleep(0.1)
|
|
raise Exception('Failed to connect')
|
|
|
|
""" Read memory address in target """
|
|
def read_reg(self, addr):
|
|
res = self.command(ESPROM.ESP_READ_REG, struct.pack('<I', addr))
|
|
if res[1] != "\0\0":
|
|
raise Exception('Failed to read target memory')
|
|
return res[0]
|
|
|
|
""" Write to memory address in target """
|
|
def write_reg(self, addr, value, mask, delay_us = 0):
|
|
if self.command(ESPROM.ESP_WRITE_REG,
|
|
struct.pack('<IIII', addr, value, mask, delay_us))[1] != "\0\0":
|
|
raise Exception('Failed to write target memory')
|
|
|
|
""" Start downloading an application image to RAM """
|
|
def mem_begin(self, size, blocks, blocksize, offset):
|
|
if self.command(ESPROM.ESP_MEM_BEGIN,
|
|
struct.pack('<IIII', size, blocks, blocksize, offset))[1] != "\0\0":
|
|
raise Exception('Failed to enter RAM download mode')
|
|
|
|
""" Send a block of an image to RAM """
|
|
def mem_block(self, data, seq):
|
|
if self.command(ESPROM.ESP_MEM_DATA,
|
|
struct.pack('<IIII', len(data), seq, 0, 0)+data, ESPROM.checksum(data))[1] != "\0\0":
|
|
raise Exception('Failed to write to target RAM')
|
|
|
|
""" Leave download mode and run the application """
|
|
def mem_finish(self, entrypoint = 0):
|
|
if self.command(ESPROM.ESP_MEM_END,
|
|
struct.pack('<II', int(entrypoint == 0), entrypoint))[1] != "\0\0":
|
|
raise Exception('Failed to leave RAM download mode')
|
|
|
|
""" Start downloading to Flash (performs an erase) """
|
|
def flash_begin(self, size, offset):
|
|
old_tmo = self._port.timeout
|
|
num_blocks = old_div((size + ESPROM.ESP_FLASH_BLOCK - 1), ESPROM.ESP_FLASH_BLOCK)
|
|
self._port.timeout = 10
|
|
if self.command(ESPROM.ESP_FLASH_BEGIN,
|
|
struct.pack('<IIII', size, num_blocks, ESPROM.ESP_FLASH_BLOCK, offset))[1] != "\0\0":
|
|
raise Exception('Failed to enter Flash download mode')
|
|
self._port.timeout = old_tmo
|
|
|
|
""" Write block to flash """
|
|
def flash_block(self, data, seq):
|
|
if self.command(ESPROM.ESP_FLASH_DATA,
|
|
struct.pack('<IIII', len(data), seq, 0, 0)+data, ESPROM.checksum(data))[1] != "\0\0":
|
|
raise Exception('Failed to write to target Flash')
|
|
|
|
""" Leave flash mode and run/reboot """
|
|
def flash_finish(self, reboot = False):
|
|
pkt = struct.pack('<I', int(not reboot))
|
|
if self.command(ESPROM.ESP_FLASH_END, pkt)[1] != "\0\0":
|
|
raise Exception('Failed to leave Flash mode')
|
|
|
|
""" Run application code in flash """
|
|
def run(self, reboot = False):
|
|
# Fake flash begin immediately followed by flash end
|
|
self.flash_begin(0, 0)
|
|
self.flash_finish(reboot)
|
|
|
|
|
|
class ESPFirmwareImage(object):
|
|
|
|
def __init__(self, filename = None):
|
|
self.segments = []
|
|
self.entrypoint = 0
|
|
|
|
if filename is not None:
|
|
f = file(filename, 'rb')
|
|
(magic, segments, _, _, self.entrypoint) = struct.unpack('<BBBBI', f.read(8))
|
|
|
|
# some sanity check
|
|
if magic != ESPROM.ESP_IMAGE_MAGIC or segments > 16:
|
|
raise Exception('Invalid firmware image')
|
|
|
|
for i in range(segments):
|
|
(offset, size) = struct.unpack('<II', f.read(8))
|
|
if offset > 0x40200000 or offset < 0x3ffe0000 or size > 65536:
|
|
raise Exception('Suspicious segment %x,%d' % (offset, size))
|
|
self.segments.append((offset, size, f.read(size)))
|
|
|
|
# Skip the padding. The checksum is stored in the last byte so that the
|
|
# file is a multiple of 16 bytes.
|
|
align = 15-(f.tell() % 16)
|
|
f.seek(align, 1)
|
|
|
|
self.checksum = ord(f.read(1))
|
|
|
|
def add_segment(self, addr, data):
|
|
# Data should be aligned on word boundary
|
|
l = len(data)
|
|
if l % 4:
|
|
data += b"\x00" * (4 - l % 4)
|
|
self.segments.append((addr, len(data), data))
|
|
|
|
def save(self, filename):
|
|
f = file(filename, 'wb')
|
|
f.write(struct.pack('<BBBBI', ESPROM.ESP_IMAGE_MAGIC, len(self.segments), 0, 0, self.entrypoint))
|
|
|
|
checksum = ESPROM.ESP_CHECKSUM_MAGIC
|
|
for (offset, size, data) in self.segments:
|
|
f.write(struct.pack('<II', offset, size))
|
|
f.write(data)
|
|
checksum = ESPROM.checksum(data, checksum)
|
|
|
|
align = 15-(f.tell() % 16)
|
|
f.seek(align, 1)
|
|
f.write(struct.pack('B', checksum))
|
|
|
|
|
|
class ELFFile(object):
|
|
|
|
def __init__(self, name):
|
|
self.name = name
|
|
self.symbols = None
|
|
|
|
def _fetch_symbols(self):
|
|
if self.symbols is not None:
|
|
return
|
|
self.symbols = {}
|
|
try:
|
|
tool_nm = "xtensa-lx106-elf-nm"
|
|
if os.getenv('XTENSA_CORE')=='lx106':
|
|
tool_nm = "xt-nm"
|
|
proc = subprocess.Popen([tool_nm, self.name], stdout=subprocess.PIPE)
|
|
except OSError:
|
|
print("Error calling "+tool_nm+", do you have Xtensa toolchain in PATH?")
|
|
sys.exit(1)
|
|
for l in proc.stdout:
|
|
fields = l.strip().split()
|
|
self.symbols[fields[2]] = int(fields[0], 16)
|
|
|
|
def get_symbol_addr(self, sym):
|
|
self._fetch_symbols()
|
|
return self.symbols[sym]
|
|
|
|
def load_section(self, section):
|
|
tool_objcopy = "xtensa-lx106-elf-objcopy"
|
|
if os.getenv('XTENSA_CORE')=='lx106':
|
|
tool_objcopy = "xt-objcopy"
|
|
subprocess.check_call([tool_objcopy, "--only-section", section, "-Obinary", self.name, ".tmp.section"])
|
|
f = open(".tmp.section", "rb")
|
|
data = f.read()
|
|
f.close()
|
|
os.remove(".tmp.section")
|
|
return data
|
|
|
|
|
|
def arg_auto_int(x):
|
|
return int(x, 0)
|
|
|
|
if __name__ == '__main__':
|
|
parser = argparse.ArgumentParser(description = 'ESP8266 ROM Bootloader Utility', prog = 'esptool')
|
|
|
|
parser.add_argument(
|
|
'--port', '-p',
|
|
help = 'Serial port device',
|
|
default = '/dev/ttyUSB0')
|
|
|
|
parser.add_argument(
|
|
'--baud', '-b',
|
|
help = 'Serial port baud rate',
|
|
type = arg_auto_int,
|
|
default = ESPROM.ESP_ROM_BAUD)
|
|
|
|
subparsers = parser.add_subparsers(
|
|
dest = 'operation',
|
|
help = 'Run esptool {command} -h for additional help')
|
|
|
|
parser_load_ram = subparsers.add_parser(
|
|
'load_ram',
|
|
help = 'Download an image to RAM and execute')
|
|
parser_load_ram.add_argument('filename', help = 'Firmware image')
|
|
|
|
parser_dump_mem = subparsers.add_parser(
|
|
'dump_mem',
|
|
help = 'Dump arbitrary memory to disk')
|
|
parser_dump_mem.add_argument('address', help = 'Base address', type = arg_auto_int)
|
|
parser_dump_mem.add_argument('size', help = 'Size of region to dump', type = arg_auto_int)
|
|
parser_dump_mem.add_argument('filename', help = 'Name of binary dump')
|
|
|
|
parser_read_mem = subparsers.add_parser(
|
|
'read_mem',
|
|
help = 'Read arbitrary memory location')
|
|
parser_read_mem.add_argument('address', help = 'Address to read', type = arg_auto_int)
|
|
|
|
parser_write_mem = subparsers.add_parser(
|
|
'write_mem',
|
|
help = 'Read-modify-write to arbitrary memory location')
|
|
parser_write_mem.add_argument('address', help = 'Address to write', type = arg_auto_int)
|
|
parser_write_mem.add_argument('value', help = 'Value', type = arg_auto_int)
|
|
parser_write_mem.add_argument('mask', help = 'Mask of bits to write', type = arg_auto_int)
|
|
|
|
parser_write_flash = subparsers.add_parser(
|
|
'write_flash',
|
|
help = 'Write a binary blob to flash')
|
|
parser_write_flash.add_argument('addr_filename', nargs = '+', help = 'Address and binary file to write there, separated by space')
|
|
|
|
parser_run = subparsers.add_parser(
|
|
'run',
|
|
help = 'Run application code in flash')
|
|
|
|
parser_image_info = subparsers.add_parser(
|
|
'image_info',
|
|
help = 'Dump headers from an application image')
|
|
parser_image_info.add_argument('filename', help = 'Image file to parse')
|
|
|
|
parser_make_image = subparsers.add_parser(
|
|
'make_image',
|
|
help = 'Create an application image from binary files')
|
|
parser_make_image.add_argument('output', help = 'Output image file')
|
|
parser_make_image.add_argument('--segfile', '-f', action = 'append', help = 'Segment input file')
|
|
parser_make_image.add_argument('--segaddr', '-a', action = 'append', help = 'Segment base address', type = arg_auto_int)
|
|
parser_make_image.add_argument('--entrypoint', '-e', help = 'Address of entry point', type = arg_auto_int, default = 0)
|
|
|
|
parser_elf2image = subparsers.add_parser(
|
|
'elf2image',
|
|
help = 'Create an application image from ELF file')
|
|
parser_elf2image.add_argument('input', help = 'Input ELF file')
|
|
parser_elf2image.add_argument('--output', '-o', help = 'Output filename prefix', type = str)
|
|
|
|
parser_read_mac = subparsers.add_parser(
|
|
'read_mac',
|
|
help = 'Read MAC address from OTP ROM')
|
|
|
|
args = parser.parse_args()
|
|
|
|
# Create the ESPROM connection object, if needed
|
|
esp = None
|
|
if args.operation not in ('image_info','make_image','elf2image'):
|
|
esp = ESPROM(args.port, args.baud)
|
|
esp.connect()
|
|
|
|
# Do the actual work. Should probably be split into separate functions.
|
|
if args.operation == 'load_ram':
|
|
image = ESPFirmwareImage(args.filename)
|
|
|
|
print('RAM boot...')
|
|
for (offset, size, data) in image.segments:
|
|
print('Downloading %d bytes at %08x...' % (size, offset), end=' ')
|
|
sys.stdout.flush()
|
|
esp.mem_begin(size, math.ceil(old_div(size, float(esp.ESP_RAM_BLOCK))), esp.ESP_RAM_BLOCK, offset)
|
|
|
|
seq = 0
|
|
while len(data) > 0:
|
|
esp.mem_block(data[0:esp.ESP_RAM_BLOCK], seq)
|
|
data = data[esp.ESP_RAM_BLOCK:]
|
|
seq += 1
|
|
print('done!')
|
|
|
|
print('All segments done, executing at %08x' % image.entrypoint)
|
|
esp.mem_finish(image.entrypoint)
|
|
|
|
elif args.operation == 'read_mem':
|
|
print('0x%08x = 0x%08x' % (args.address, esp.read_reg(args.address)))
|
|
|
|
elif args.operation == 'write_mem':
|
|
esp.write_reg(args.address, args.value, args.mask, 0)
|
|
print('Wrote %08x, mask %08x to %08x' % (args.value, args.mask, args.address))
|
|
|
|
elif args.operation == 'dump_mem':
|
|
f = file(args.filename, 'wb')
|
|
for i in range(old_div(args.size,4)):
|
|
d = esp.read_reg(args.address+(i*4))
|
|
f.write(struct.pack('<I', d))
|
|
if f.tell() % 1024 == 0:
|
|
print('\r%d bytes read... (%d %%)' % (f.tell(), f.tell()*100/args.size), end=' ')
|
|
sys.stdout.flush()
|
|
print('Done!')
|
|
|
|
elif args.operation == 'write_flash':
|
|
assert len(args.addr_filename) % 2 == 0
|
|
while args.addr_filename:
|
|
address = int(args.addr_filename[0], 0)
|
|
filename = args.addr_filename[1]
|
|
args.addr_filename = args.addr_filename[2:]
|
|
image = file(filename, 'rb').read()
|
|
print('Erasing flash...')
|
|
blocks = math.ceil(old_div(len(image),float(esp.ESP_FLASH_BLOCK)))
|
|
esp.flash_begin(blocks*esp.ESP_FLASH_BLOCK, address)
|
|
seq = 0
|
|
while len(image) > 0:
|
|
print('\rWriting at 0x%08x... (%d %%)' % (address + seq*esp.ESP_FLASH_BLOCK, 100*(seq+1)/blocks), end=' ')
|
|
sys.stdout.flush()
|
|
block = image[0:esp.ESP_FLASH_BLOCK]
|
|
block = block + '\xe0' * (esp.ESP_FLASH_BLOCK-len(block))
|
|
esp.flash_block(block, seq)
|
|
image = image[esp.ESP_FLASH_BLOCK:]
|
|
seq += 1
|
|
print()
|
|
print('\nLeaving...')
|
|
esp.flash_finish(False)
|
|
|
|
elif args.operation == 'run':
|
|
esp.run()
|
|
|
|
elif args.operation == 'image_info':
|
|
image = ESPFirmwareImage(args.filename)
|
|
print(('Entry point: %08x' % image.entrypoint) if image.entrypoint != 0 else 'Entry point not set')
|
|
print('%d segments' % len(image.segments))
|
|
print()
|
|
checksum = ESPROM.ESP_CHECKSUM_MAGIC
|
|
for (idx, (offset, size, data)) in enumerate(image.segments):
|
|
print('Segment %d: %5d bytes at %08x' % (idx+1, size, offset))
|
|
checksum = ESPROM.checksum(data, checksum)
|
|
print()
|
|
print('Checksum: %02x (%s)' % (image.checksum, 'valid' if image.checksum == checksum else 'invalid!'))
|
|
|
|
elif args.operation == 'make_image':
|
|
image = ESPFirmwareImage()
|
|
if len(args.segfile) == 0:
|
|
raise Exception('No segments specified')
|
|
if len(args.segfile) != len(args.segaddr):
|
|
raise Exception('Number of specified files does not match number of specified addresses')
|
|
for (seg, addr) in zip(args.segfile, args.segaddr):
|
|
data = file(seg, 'rb').read()
|
|
image.add_segment(addr, data)
|
|
image.entrypoint = args.entrypoint
|
|
image.save(args.output)
|
|
|
|
elif args.operation == 'elf2image':
|
|
if args.output is None:
|
|
args.output = args.input + '-'
|
|
e = ELFFile(args.input)
|
|
image = ESPFirmwareImage()
|
|
image.entrypoint = e.get_symbol_addr("call_user_start")
|
|
for section, start in ((".text", "_text_start"), (".data", "_data_start"), (".rodata", "_rodata_start")):
|
|
data = e.load_section(section)
|
|
image.add_segment(e.get_symbol_addr(start), data)
|
|
image.save(args.output + "0x00000.bin")
|
|
data = e.load_section(".irom0.text")
|
|
off = e.get_symbol_addr("_irom0_text_start") - 0x40200000
|
|
assert off >= 0
|
|
f = open(args.output + "0x%05x.bin" % off, "wb")
|
|
f.write(data)
|
|
f.close()
|
|
|
|
elif args.operation == 'read_mac':
|
|
mac0 = esp.read_reg(esp.ESP_OTP_MAC0)
|
|
mac1 = esp.read_reg(esp.ESP_OTP_MAC1)
|
|
print('MAC: 18:fe:34:%02x:%02x:%02x' % ((mac1 >> 8) & 0xff, mac1 & 0xff, (mac0 >> 24) & 0xff))
|