107 lines
3.7 KiB
Markdown
107 lines
3.7 KiB
Markdown
There are essentially three ways to build your NodeMCU firmware: cloud build service, Docker image, dedicated Linux environment (possibly VM).
|
|
|
|
## Tools
|
|
|
|
### Cloud Build Service
|
|
<del>NodeMCU "application developers" just need a ready-made firmware. There's a [cloud build service](http://nodemcu-build.com/) with a nice UI and configuration options for them.</del>
|
|
|
|
Not available yet.
|
|
|
|
### Docker Image
|
|
Occasional NodeMCU firmware hackers don't need full control over the complete tool chain. They might not want to setup a Linux VM with the build environment. Docker to the rescue. Give [Docker NodeMCU build](https://hub.docker.com/r/marcelstoer/nodemcu-build/) a try.
|
|
|
|
!!! caution
|
|
|
|
Take note that you need to clone the repository including Git submodules just as described below for the Linux environment.
|
|
|
|
### Linux Build Environment
|
|
NodeMCU firmware developers commit or contribute to the project on GitHub and might want to build their own full fledged build environment with the complete tool chain.
|
|
|
|
Run the following command for a new checkout from scratch. This will fetch the nodemcu repo, checkout the `dev-esp32` branch and finally pull all submodules:
|
|
|
|
```
|
|
git clone --branch dev-esp32 --recurse-submodules https://github.com/nodemcu/nodemcu-firmware.git nodemcu-firmware-esp32
|
|
```
|
|
|
|
The `make` command initiates the build process, which will start with the configuration menu to set the build options.
|
|
|
|
!!! important
|
|
|
|
GNU make version 4.0 or higher is required for a successful build. Versions 3.8.2 and below will produce an incomplete firmware image.
|
|
|
|
Updating your clone from upstream needs an additional command to update the submodules as well:
|
|
|
|
```
|
|
git pull origin dev-esp32
|
|
git submodule init #only if repo was cloned w/o submodules init
|
|
git submodule update --recursive
|
|
```
|
|
|
|
## Build Options
|
|
|
|
All configuration options are accessed from the file `sdkconfig`. It's advisable to set it up with the interactive `make menuconfig` - on a fresh checkout you're prompted to run through it by default.
|
|
|
|
The most notable options are described in the following sections.
|
|
|
|
### Select Modules
|
|
|
|
Follow the menu path
|
|
```
|
|
Component config --->
|
|
NodeMCU modules --->
|
|
```
|
|
Tick or untick modules as required.
|
|
|
|
### UART default bit rate
|
|
|
|
Follow the menu path
|
|
```
|
|
Component config --->
|
|
Platform config --->
|
|
UART console default bit rate --->
|
|
```
|
|
|
|
### CPU Frequency
|
|
|
|
Follow the menu path
|
|
```
|
|
Component config --->
|
|
ESP32-specific --->
|
|
CPU frequency --->
|
|
```
|
|
|
|
### Stack Size
|
|
|
|
If you experience random crashes then increase the stack size and feed back your observation on the project's issues list.
|
|
|
|
Follow the menu path
|
|
```
|
|
Component config --->
|
|
ESP32-specific --->
|
|
Main task stack size --->
|
|
```
|
|
|
|
### Flashing Options
|
|
|
|
Default settings for flashing the firmware with esptool.py are also configured with menuconfig:
|
|
|
|
```
|
|
Serial flasher config --->
|
|
Default serial port
|
|
Default baud rate
|
|
Flash SPI mode --->
|
|
Detect flash size when flashing bootloader --->
|
|
```
|
|
|
|
### Partition Table
|
|
IDF's default partition table `Single factory app, no OTA` does not provide enough room for a firmware including large modules like e.g. `http` or `sodium`. To enable full feature sets, NodeMCU uses a custom partition table from `components/platform/partitions.csv` which allocates ~1.5 MB for the firmware image. During first boot, the firmware creates an additional partition for SPIFFS in the remaining flash space.
|
|
|
|
For 2MB flash modules an alternative partition table available as `components/platform/partitions-2MB.csv`. It restricts the SPIFFS partition to ~448 kB and can be used with menuconfig:
|
|
|
|
```
|
|
Partition Table --->
|
|
Partition Table (Custom partition table CSV)
|
|
(components/platform/partitions-2MB.csv) Custom partition CSV file
|
|
(0x10000) Factory app partition offset
|
|
```
|