227 lines
7.5 KiB
C
227 lines
7.5 KiB
C
// Module for interfacing with GPIO
|
|
|
|
#include "module.h"
|
|
#include "lauxlib.h"
|
|
#include "lmem.h"
|
|
#include "platform.h"
|
|
#include "user_interface.h"
|
|
#include "c_types.h"
|
|
#include "c_string.h"
|
|
#include "gpio.h"
|
|
|
|
#define PULLUP PLATFORM_GPIO_PULLUP
|
|
#define FLOAT PLATFORM_GPIO_FLOAT
|
|
#define OUTPUT PLATFORM_GPIO_OUTPUT
|
|
#define INPUT PLATFORM_GPIO_INPUT
|
|
#define INTERRUPT PLATFORM_GPIO_INT
|
|
#define HIGH PLATFORM_GPIO_HIGH
|
|
#define LOW PLATFORM_GPIO_LOW
|
|
|
|
#ifdef GPIO_INTERRUPT_ENABLE
|
|
|
|
// We also know that the non-level interrupt types are < LOLEVEL, and that
|
|
// HILEVEL is > LOLEVEL. Since this is burned into the hardware it is not
|
|
// going to change.
|
|
#define INTERRUPT_TYPE_IS_LEVEL(x) ((x) >= GPIO_PIN_INTR_LOLEVEL)
|
|
|
|
static int gpio_cb_ref[GPIO_PIN_NUM];
|
|
|
|
// This task is scheduled by the ISR and is used
|
|
// to initiate the Lua-land gpio.trig() callback function
|
|
// It also re-enables the pin interrupt, so that we get another callback queued
|
|
static void gpio_intr_callback_task (task_param_t param, uint8 priority)
|
|
{
|
|
unsigned pin = param >> 1;
|
|
unsigned level = param & 1;
|
|
UNUSED(priority);
|
|
|
|
NODE_DBG("pin:%d, level:%d \n", pin, level);
|
|
if(gpio_cb_ref[pin] != LUA_NOREF) {
|
|
// GPIO callbacks are run in L0 and inlcude the level as a parameter
|
|
lua_State *L = lua_getstate();
|
|
NODE_DBG("Calling: %08x\n", gpio_cb_ref[pin]);
|
|
//
|
|
if (!INTERRUPT_TYPE_IS_LEVEL(pin_int_type[pin])) {
|
|
// Edge triggered -- re-enable the interrupt
|
|
platform_gpio_intr_init(pin, pin_int_type[pin]);
|
|
}
|
|
|
|
// Do the actual callback
|
|
lua_rawgeti(L, LUA_REGISTRYINDEX, gpio_cb_ref[pin]);
|
|
lua_pushinteger(L, level);
|
|
lua_call(L, 1, 0);
|
|
|
|
if (INTERRUPT_TYPE_IS_LEVEL(pin_int_type[pin])) {
|
|
// Level triggered -- re-enable the callback
|
|
platform_gpio_intr_init(pin, pin_int_type[pin]);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Lua: trig( pin, type, function )
|
|
static int lgpio_trig( lua_State* L )
|
|
{
|
|
unsigned pin = luaL_checkinteger( L, 1 );
|
|
static const char * const opts[] = {"", "up", "down", "both", "low", "high"};
|
|
static const int opts_type[] = {
|
|
GPIO_PIN_INTR_DISABLE, GPIO_PIN_INTR_POSEDGE, GPIO_PIN_INTR_NEGEDGE,
|
|
GPIO_PIN_INTR_ANYEDGE, GPIO_PIN_INTR_LOLEVEL, GPIO_PIN_INTR_HILEVEL
|
|
};
|
|
int type = opts_type[luaL_checkoption(L, 2, "", opts)];
|
|
|
|
luaL_argcheck(L, platform_gpio_exists(pin) && pin>0, 1, "Invalid interrupt pin");
|
|
|
|
if (type != GPIO_PIN_INTR_DISABLE) {
|
|
int cbtype = lua_type(L, 3);
|
|
luaL_argcheck(L, cbtype == LUA_TFUNCTION || cbtype == LUA_TLIGHTFUNCTION, 3,
|
|
"invalid callback type");
|
|
lua_pushvalue(L, 3); // copy argument (func) to the top of stack
|
|
gpio_cb_ref[pin] = luaL_ref(L, LUA_REGISTRYINDEX);
|
|
}
|
|
NODE_DBG("Pin data: %d %d %08x, %d %d %d, %08x\n",
|
|
pin, type, pin_mux[pin], pin_num[pin], pin_func[pin], pin_int_type[pin], gpio_cb_ref[pin]);
|
|
platform_gpio_intr_init(pin, type);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
// Lua: mode( pin, mode, pullup )
|
|
static int lgpio_mode( lua_State* L )
|
|
{
|
|
unsigned pin = luaL_checkinteger( L, 1 );
|
|
unsigned mode = luaL_checkinteger( L, 2 );
|
|
unsigned pullup = luaL_optinteger( L, 3, FLOAT );
|
|
|
|
luaL_argcheck(L, platform_gpio_exists(pin) && (mode!=INTERRUPT || pin>0), 1, "Invalid pin");
|
|
luaL_argcheck(L, mode==OUTPUT || mode==INPUT
|
|
#ifdef GPIO_INTERRUPT_ENABLE
|
|
|| mode==INTERRUPT
|
|
#endif
|
|
, 2, "wrong arg type" );
|
|
if(pullup!=FLOAT) pullup = PULLUP;
|
|
|
|
NODE_DBG("pin,mode,pullup= %d %d %d\n",pin,mode,pullup);
|
|
NODE_DBG("Pin data at mode: %d %08x, %d %d %d, %08x\n",
|
|
pin, pin_mux[pin], pin_num[pin], pin_func[pin], pin_int_type[pin], gpio_cb_ref[pin]);
|
|
|
|
#ifdef GPIO_INTERRUPT_ENABLE
|
|
if (mode != INTERRUPT){ // disable interrupt
|
|
if(gpio_cb_ref[pin] != LUA_NOREF){
|
|
luaL_unref(L, LUA_REGISTRYINDEX, gpio_cb_ref[pin]);
|
|
gpio_cb_ref[pin] = LUA_NOREF;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if( platform_gpio_mode( pin, mode, pullup ) < 0 )
|
|
return luaL_error( L, "wrong pin num." );
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Lua: read( pin )
|
|
static int lgpio_read( lua_State* L )
|
|
{
|
|
unsigned pin = luaL_checkinteger( L, 1 );
|
|
MOD_CHECK_ID( gpio, pin );
|
|
lua_pushinteger( L, platform_gpio_read( pin ) );
|
|
return 1;
|
|
}
|
|
|
|
// Lua: write( pin, level )
|
|
static int lgpio_write( lua_State* L )
|
|
{
|
|
unsigned pin = luaL_checkinteger( L, 1 );
|
|
unsigned level = luaL_checkinteger( L, 2 );
|
|
|
|
MOD_CHECK_ID( gpio, pin );
|
|
luaL_argcheck(L, level==HIGH || level==LOW, 2, "wrong level type" );
|
|
|
|
platform_gpio_write(pin, level);
|
|
return 0;
|
|
}
|
|
|
|
#define DELAY_TABLE_MAX_LEN 256
|
|
#define delayMicroseconds os_delay_us
|
|
// Lua: serout( pin, firstLevel, delay_table, [repeatNum] )
|
|
// -- serout( pin, firstLevel, delay_table, [repeatNum] )
|
|
// gpio.mode(1,gpio.OUTPUT,gpio.PULLUP)
|
|
// gpio.serout(1,1,{30,30,60,60,30,30}) -- serial one byte, b10110010
|
|
// gpio.serout(1,1,{30,70},8) -- serial 30% pwm 10k, lasts 8 cycles
|
|
// gpio.serout(1,1,{3,7},8) -- serial 30% pwm 100k, lasts 8 cycles
|
|
// gpio.serout(1,1,{0,0},8) -- serial 50% pwm as fast as possible, lasts 8 cycles
|
|
// gpio.mode(1,gpio.OUTPUT,gpio.PULLUP)
|
|
// gpio.serout(1,0,{20,10,10,20,10,10,10,100}) -- sim uart one byte 0x5A at about 100kbps
|
|
// gpio.serout(1,1,{8,18},8) -- serial 30% pwm 38k, lasts 8 cycles
|
|
static int lgpio_serout( lua_State* L )
|
|
{
|
|
unsigned clocks_per_us = system_get_cpu_freq();
|
|
unsigned pin = luaL_checkinteger( L, 1 );
|
|
unsigned level = luaL_checkinteger( L, 2 );
|
|
unsigned repeats = luaL_optint( L, 4, 1 );
|
|
unsigned table_len, i, j;
|
|
|
|
luaL_argcheck(L, platform_gpio_exists(pin), 1, "Invalid pin");
|
|
luaL_argcheck(L, level==HIGH || level==LOW, 2, "Wrong arg type" );
|
|
luaL_argcheck(L, lua_istable( L, 3 ) &&
|
|
((table_len = lua_objlen( L, 3 )<DELAY_TABLE_MAX_LEN)), 3, "Invalid table" );
|
|
luaL_argcheck(L, repeats<256, 4, "repeats >= 256" );
|
|
|
|
uint32 *delay_table = luaM_newvector(L, table_len*repeats, uint32);
|
|
for( i = 1; i <= table_len; i++ ) {
|
|
lua_rawgeti( L, 3, i + 1 );
|
|
unsigned delay = (unsigned) luaL_checkinteger( L, -1 );
|
|
if (delay > 1000000) return luaL_error( L, "delay %u must be < 1,000,000 us", i );
|
|
delay_table[i-1] = delay;
|
|
lua_pop( L, 1 );
|
|
}
|
|
|
|
for( i = 0; i <= repeats; i++ ) {
|
|
if (!i) // skip the first loop (presumably this is some form of icache priming??).
|
|
continue;
|
|
|
|
for( j = 0;j < table_len; j++ ){
|
|
/* Direct Write is a ROM function which already disables interrupts for the atomic bit */
|
|
GPIO_OUTPUT_SET(GPIO_ID_PIN(pin_num[pin]), level);
|
|
delayMicroseconds(delay_table[j]);
|
|
level = level==LOW ? HIGH : LOW;
|
|
}
|
|
}
|
|
|
|
luaM_freearray(L, delay_table, table_len, uint32);
|
|
return 0;
|
|
}
|
|
#undef DELAY_TABLE_MAX_LEN
|
|
|
|
// Module function map
|
|
static const LUA_REG_TYPE gpio_map[] = {
|
|
{ LSTRKEY( "mode" ), LFUNCVAL( lgpio_mode ) },
|
|
{ LSTRKEY( "read" ), LFUNCVAL( lgpio_read ) },
|
|
{ LSTRKEY( "write" ), LFUNCVAL( lgpio_write ) },
|
|
{ LSTRKEY( "serout" ), LFUNCVAL( lgpio_serout ) },
|
|
#ifdef GPIO_INTERRUPT_ENABLE
|
|
{ LSTRKEY( "trig" ), LFUNCVAL( lgpio_trig ) },
|
|
{ LSTRKEY( "INT" ), LNUMVAL( INTERRUPT ) },
|
|
#endif
|
|
{ LSTRKEY( "OUTPUT" ), LNUMVAL( OUTPUT ) },
|
|
{ LSTRKEY( "INPUT" ), LNUMVAL( INPUT ) },
|
|
{ LSTRKEY( "HIGH" ), LNUMVAL( HIGH ) },
|
|
{ LSTRKEY( "LOW" ), LNUMVAL( LOW ) },
|
|
{ LSTRKEY( "FLOAT" ), LNUMVAL( FLOAT ) },
|
|
{ LSTRKEY( "PULLUP" ), LNUMVAL( PULLUP ) },
|
|
{ LNILKEY, LNILVAL }
|
|
};
|
|
|
|
int luaopen_gpio( lua_State *L ) {
|
|
#ifdef GPIO_INTERRUPT_ENABLE
|
|
int i;
|
|
for(i=0;i<GPIO_PIN_NUM;i++){
|
|
gpio_cb_ref[i] = LUA_NOREF;
|
|
}
|
|
platform_gpio_init(task_get_id(gpio_intr_callback_task));
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
NODEMCU_MODULE(GPIO, "gpio", gpio_map, luaopen_gpio);
|