256 lines
11 KiB
C
256 lines
11 KiB
C
/*
|
|
* Copyright (c) Espressif System 2010 - 2012
|
|
*
|
|
*/
|
|
|
|
#ifndef _EAGLE_SOC_H_
|
|
#define _EAGLE_SOC_H_
|
|
|
|
//Register Bits{{
|
|
#define BIT31 0x80000000
|
|
#define BIT30 0x40000000
|
|
#define BIT29 0x20000000
|
|
#define BIT28 0x10000000
|
|
#define BIT27 0x08000000
|
|
#define BIT26 0x04000000
|
|
#define BIT25 0x02000000
|
|
#define BIT24 0x01000000
|
|
#define BIT23 0x00800000
|
|
#define BIT22 0x00400000
|
|
#define BIT21 0x00200000
|
|
#define BIT20 0x00100000
|
|
#define BIT19 0x00080000
|
|
#define BIT18 0x00040000
|
|
#define BIT17 0x00020000
|
|
#define BIT16 0x00010000
|
|
#define BIT15 0x00008000
|
|
#define BIT14 0x00004000
|
|
#define BIT13 0x00002000
|
|
#define BIT12 0x00001000
|
|
#define BIT11 0x00000800
|
|
#define BIT10 0x00000400
|
|
#define BIT9 0x00000200
|
|
#define BIT8 0x00000100
|
|
#define BIT7 0x00000080
|
|
#define BIT6 0x00000040
|
|
#define BIT5 0x00000020
|
|
#define BIT4 0x00000010
|
|
#define BIT3 0x00000008
|
|
#define BIT2 0x00000004
|
|
#define BIT1 0x00000002
|
|
#define BIT0 0x00000001
|
|
//}}
|
|
|
|
//Registers Operation {{
|
|
#define ETS_UNCACHED_ADDR(addr) (addr)
|
|
#define ETS_CACHED_ADDR(addr) (addr)
|
|
|
|
|
|
#define READ_PERI_REG(addr) (*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr)))
|
|
#define WRITE_PERI_REG(addr, val) (*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr))) = (uint32_t)(val)
|
|
#define CLEAR_PERI_REG_MASK(reg, mask) WRITE_PERI_REG((reg), (READ_PERI_REG(reg)&(~(mask))))
|
|
#define SET_PERI_REG_MASK(reg, mask) WRITE_PERI_REG((reg), (READ_PERI_REG(reg)|(mask)))
|
|
#define GET_PERI_REG_BITS(reg, hipos,lowpos) ((READ_PERI_REG(reg)>>(lowpos))&((1<<((hipos)-(lowpos)+1))-1))
|
|
#define SET_PERI_REG_BITS(reg,bit_map,value,shift) (WRITE_PERI_REG((reg),(READ_PERI_REG(reg)&(~((bit_map)<<(shift))))|((value)<<(shift)) ))
|
|
//}}
|
|
|
|
//Periheral Clock {{
|
|
#define APB_CLK_FREQ 80*1000000 //unit: Hz
|
|
#define UART_CLK_FREQ APB_CLK_FREQ
|
|
#define TIMER_CLK_FREQ (APB_CLK_FREQ>>8) //divided by 256
|
|
//}}
|
|
|
|
//Peripheral device base address define{{
|
|
#define PERIPHS_DPORT_BASEADDR 0x3ff00000
|
|
#define PERIPHS_GPIO_BASEADDR 0x60000300
|
|
#define PERIPHS_TIMER_BASEDDR 0x60000600
|
|
#define PERIPHS_RTC_BASEADDR 0x60000700
|
|
#define PERIPHS_IO_MUX 0x60000800
|
|
//}}
|
|
|
|
//Interrupt remap control registers define{{
|
|
#define EDGE_INT_ENABLE_REG (PERIPHS_DPORT_BASEADDR+0x04)
|
|
#define TM1_EDGE_INT_ENABLE() SET_PERI_REG_MASK(EDGE_INT_ENABLE_REG, BIT1)
|
|
#define TM1_EDGE_INT_DISABLE() CLEAR_PERI_REG_MASK(EDGE_INT_ENABLE_REG, BIT1)
|
|
//}}
|
|
|
|
//GPIO reg {{
|
|
#define GPIO_REG_READ(reg) READ_PERI_REG(PERIPHS_GPIO_BASEADDR + reg)
|
|
#define GPIO_REG_WRITE(reg, val) WRITE_PERI_REG(PERIPHS_GPIO_BASEADDR + reg, val)
|
|
#define GPIO_OUT_ADDRESS 0x00
|
|
#define GPIO_OUT_W1TS_ADDRESS 0x04
|
|
#define GPIO_OUT_W1TC_ADDRESS 0x08
|
|
|
|
#define GPIO_ENABLE_ADDRESS 0x0c
|
|
#define GPIO_ENABLE_W1TS_ADDRESS 0x10
|
|
#define GPIO_ENABLE_W1TC_ADDRESS 0x14
|
|
#define GPIO_OUT_W1TC_DATA_MASK 0x0000ffff
|
|
|
|
#define GPIO_IN_ADDRESS 0x18
|
|
|
|
#define GPIO_STATUS_ADDRESS 0x1c
|
|
#define GPIO_STATUS_W1TS_ADDRESS 0x20
|
|
#define GPIO_STATUS_W1TC_ADDRESS 0x24
|
|
#define GPIO_STATUS_INTERRUPT_MASK 0x0000ffff
|
|
|
|
#define GPIO_RTC_CALIB_SYNC PERIPHS_GPIO_BASEADDR+0x6c
|
|
#define RTC_CALIB_START BIT31 //first write to zero, then to one to start
|
|
#define RTC_PERIOD_NUM_MASK 0x3ff //max 8ms
|
|
#define GPIO_RTC_CALIB_VALUE PERIPHS_GPIO_BASEADDR+0x70
|
|
#define RTC_CALIB_RDY_S 31 //after measure, flag to one, when start from zero to one, turn to zero
|
|
#define RTC_CALIB_VALUE_MASK 0xfffff
|
|
|
|
#define GPIO_PIN0_ADDRESS 0x28
|
|
|
|
#define GPIO_ID_PIN0 0
|
|
#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n))
|
|
#define GPIO_LAST_REGISTER_ID GPIO_ID_PIN(15)
|
|
#define GPIO_ID_NONE 0xffffffff
|
|
|
|
#define GPIO_PIN_COUNT 16
|
|
|
|
#define GPIO_PIN_CONFIG_MSB 12
|
|
#define GPIO_PIN_CONFIG_LSB 11
|
|
#define GPIO_PIN_CONFIG_MASK 0x00001800
|
|
#define GPIO_PIN_CONFIG_GET(x) (((x) & GPIO_PIN_CONFIG_MASK) >> GPIO_PIN_CONFIG_LSB)
|
|
#define GPIO_PIN_CONFIG_SET(x) (((x) << GPIO_PIN_CONFIG_LSB) & GPIO_PIN_CONFIG_MASK)
|
|
|
|
#define GPIO_WAKEUP_ENABLE 1
|
|
#define GPIO_WAKEUP_DISABLE (~GPIO_WAKEUP_ENABLE)
|
|
#define GPIO_PIN_WAKEUP_ENABLE_MSB 10
|
|
#define GPIO_PIN_WAKEUP_ENABLE_LSB 10
|
|
#define GPIO_PIN_WAKEUP_ENABLE_MASK 0x00000400
|
|
#define GPIO_PIN_WAKEUP_ENABLE_GET(x) (((x) & GPIO_PIN_WAKEUP_ENABLE_MASK) >> GPIO_PIN_WAKEUP_ENABLE_LSB)
|
|
#define GPIO_PIN_WAKEUP_ENABLE_SET(x) (((x) << GPIO_PIN_WAKEUP_ENABLE_LSB) & GPIO_PIN_WAKEUP_ENABLE_MASK)
|
|
|
|
#define GPIO_PIN_INT_TYPE_MASK 0x380
|
|
#define GPIO_PIN_INT_TYPE_MSB 9
|
|
#define GPIO_PIN_INT_TYPE_LSB 7
|
|
#define GPIO_PIN_INT_TYPE_GET(x) (((x) & GPIO_PIN_INT_TYPE_MASK) >> GPIO_PIN_INT_TYPE_LSB)
|
|
#define GPIO_PIN_INT_TYPE_SET(x) (((x) << GPIO_PIN_INT_TYPE_LSB) & GPIO_PIN_INT_TYPE_MASK)
|
|
|
|
#define GPIO_PAD_DRIVER_ENABLE 1
|
|
#define GPIO_PAD_DRIVER_DISABLE (~GPIO_PAD_DRIVER_ENABLE)
|
|
#define GPIO_PIN_PAD_DRIVER_MSB 2
|
|
#define GPIO_PIN_PAD_DRIVER_LSB 2
|
|
#define GPIO_PIN_PAD_DRIVER_MASK 0x00000004
|
|
#define GPIO_PIN_PAD_DRIVER_GET(x) (((x) & GPIO_PIN_PAD_DRIVER_MASK) >> GPIO_PIN_PAD_DRIVER_LSB)
|
|
#define GPIO_PIN_PAD_DRIVER_SET(x) (((x) << GPIO_PIN_PAD_DRIVER_LSB) & GPIO_PIN_PAD_DRIVER_MASK)
|
|
|
|
#define GPIO_AS_PIN_SOURCE 0
|
|
#define SIGMA_AS_PIN_SOURCE (~GPIO_AS_PIN_SOURCE)
|
|
#define GPIO_PIN_SOURCE_MSB 0
|
|
#define GPIO_PIN_SOURCE_LSB 0
|
|
#define GPIO_PIN_SOURCE_MASK 0x00000001
|
|
#define GPIO_PIN_SOURCE_GET(x) (((x) & GPIO_PIN_SOURCE_MASK) >> GPIO_PIN_SOURCE_LSB)
|
|
#define GPIO_PIN_SOURCE_SET(x) (((x) << GPIO_PIN_SOURCE_LSB) & GPIO_PIN_SOURCE_MASK)
|
|
// }}
|
|
|
|
// TIMER reg {{
|
|
#define RTC_REG_READ(addr) READ_PERI_REG(PERIPHS_TIMER_BASEDDR + addr)
|
|
#define RTC_REG_WRITE(addr, val) WRITE_PERI_REG(PERIPHS_TIMER_BASEDDR + addr, val)
|
|
#define RTC_CLR_REG_MASK(reg, mask) CLEAR_PERI_REG_MASK(PERIPHS_TIMER_BASEDDR +reg, mask)
|
|
/* Returns the current time according to the timer timer. */
|
|
#define NOW() RTC_REG_READ(FRC2_COUNT_ADDRESS)
|
|
|
|
//load initial_value to timer1
|
|
#define FRC1_LOAD_ADDRESS 0x00
|
|
|
|
//timer1's counter value(count from initial_value to 0)
|
|
#define FRC1_COUNT_ADDRESS 0x04
|
|
|
|
#define FRC1_CTRL_ADDRESS 0x08
|
|
|
|
//clear timer1's interrupt when write this address
|
|
#define FRC1_INT_ADDRESS 0x0c
|
|
#define FRC1_INT_CLR_MASK 0x00000001
|
|
|
|
//timer2's counter value(count from initial_value to 0)
|
|
#define FRC2_COUNT_ADDRESS 0x24
|
|
// }}
|
|
|
|
//RTC reg {{
|
|
#define REG_RTC_BASE PERIPHS_RTC_BASEADDR
|
|
|
|
#define RTC_GPIO_OUT (REG_RTC_BASE + 0x068)
|
|
#define RTC_GPIO_ENABLE (REG_RTC_BASE + 0x074)
|
|
#define RTC_GPIO_IN_DATA (REG_RTC_BASE + 0x08C)
|
|
#define RTC_GPIO_CONF (REG_RTC_BASE + 0x090)
|
|
#define PAD_XPD_DCDC_CONF (REG_RTC_BASE + 0x0A0)
|
|
//}}
|
|
|
|
//PIN Mux reg {{
|
|
#define PERIPHS_IO_MUX_FUNC 0x13
|
|
#define PERIPHS_IO_MUX_FUNC_S 4
|
|
#define PERIPHS_IO_MUX_PULLUP BIT7
|
|
#define PERIPHS_IO_MUX_PULLUP2 BIT6
|
|
#define PERIPHS_IO_MUX_SLEEP_PULLUP BIT3
|
|
#define PERIPHS_IO_MUX_SLEEP_PULLUP2 BIT2
|
|
#define PERIPHS_IO_MUX_SLEEP_OE BIT1
|
|
#define PERIPHS_IO_MUX_OE BIT0
|
|
|
|
#define PERIPHS_IO_MUX_CONF_U (PERIPHS_IO_MUX + 0x00)
|
|
#define SPI0_CLK_EQU_SYS_CLK BIT8
|
|
#define SPI1_CLK_EQU_SYS_CLK BIT9
|
|
#define PERIPHS_IO_MUX_MTDI_U (PERIPHS_IO_MUX + 0x04)
|
|
#define FUNC_GPIO12 3
|
|
#define PERIPHS_IO_MUX_MTCK_U (PERIPHS_IO_MUX + 0x08)
|
|
#define FUNC_GPIO13 3
|
|
#define PERIPHS_IO_MUX_MTMS_U (PERIPHS_IO_MUX + 0x0C)
|
|
#define FUNC_GPIO14 3
|
|
#define PERIPHS_IO_MUX_MTDO_U (PERIPHS_IO_MUX + 0x10)
|
|
#define FUNC_GPIO15 3
|
|
#define FUNC_U0RTS 4
|
|
#define PERIPHS_IO_MUX_U0RXD_U (PERIPHS_IO_MUX + 0x14)
|
|
#define FUNC_GPIO3 3
|
|
#define PERIPHS_IO_MUX_U0TXD_U (PERIPHS_IO_MUX + 0x18)
|
|
#define FUNC_U0TXD 0
|
|
#define FUNC_GPIO1 3
|
|
#define PERIPHS_IO_MUX_SD_CLK_U (PERIPHS_IO_MUX + 0x1c)
|
|
#define FUNC_SDCLK 0
|
|
#define FUNC_SPICLK 1
|
|
#define PERIPHS_IO_MUX_SD_DATA0_U (PERIPHS_IO_MUX + 0x20)
|
|
#define FUNC_SDDATA0 0
|
|
#define FUNC_SPIQ 1
|
|
#define FUNC_U1TXD 4
|
|
#define PERIPHS_IO_MUX_SD_DATA1_U (PERIPHS_IO_MUX + 0x24)
|
|
#define FUNC_SDDATA1 0
|
|
#define FUNC_SPID 1
|
|
#define FUNC_U1RXD 4
|
|
#define FUNC_SDDATA1_U1RXD 7
|
|
#define PERIPHS_IO_MUX_SD_DATA2_U (PERIPHS_IO_MUX + 0x28)
|
|
#define FUNC_SDDATA2 0
|
|
#define FUNC_SPIHD 1
|
|
#define FUNC_GPIO9 3
|
|
#define PERIPHS_IO_MUX_SD_DATA3_U (PERIPHS_IO_MUX + 0x2c)
|
|
#define FUNC_SDDATA3 0
|
|
#define FUNC_SPIWP 1
|
|
#define FUNC_GPIO10 3
|
|
#define PERIPHS_IO_MUX_SD_CMD_U (PERIPHS_IO_MUX + 0x30)
|
|
#define FUNC_SDCMD 0
|
|
#define FUNC_SPICS0 1
|
|
#define PERIPHS_IO_MUX_GPIO0_U (PERIPHS_IO_MUX + 0x34)
|
|
#define FUNC_GPIO0 0
|
|
#define PERIPHS_IO_MUX_GPIO2_U (PERIPHS_IO_MUX + 0x38)
|
|
#define FUNC_GPIO2 0
|
|
#define FUNC_U1TXD_BK 2
|
|
#define FUNC_U0TXD_BK 4
|
|
#define PERIPHS_IO_MUX_GPIO4_U (PERIPHS_IO_MUX + 0x3C)
|
|
#define FUNC_GPIO4 0
|
|
#define PERIPHS_IO_MUX_GPIO5_U (PERIPHS_IO_MUX + 0x40)
|
|
#define FUNC_GPIO5 0
|
|
|
|
#define PIN_PULLUP_DIS(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME, PERIPHS_IO_MUX_PULLUP)
|
|
#define PIN_PULLUP_EN(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME, PERIPHS_IO_MUX_PULLUP)
|
|
|
|
#define PIN_FUNC_SELECT(PIN_NAME, FUNC) do { \
|
|
WRITE_PERI_REG(PIN_NAME, \
|
|
READ_PERI_REG(PIN_NAME) \
|
|
& (~(PERIPHS_IO_MUX_FUNC<<PERIPHS_IO_MUX_FUNC_S)) \
|
|
|( (((FUNC&BIT2)<<2)|(FUNC&0x3))<<PERIPHS_IO_MUX_FUNC_S) ); \
|
|
} while (0)
|
|
|
|
//}}
|
|
|
|
#endif //_EAGLE_SOC_H_
|