pigpio/pigpiod_if.h

/*
This is free and unencumbered software released into the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or
distribute this software, either in source code form or as a compiled
binary, for any purpose, commercial or non-commercial, and by any
means.

In jurisdictions that recognize copyright laws, the author or authors
of this software dedicate any and all copyright interest in the
software to the public domain. We make this dedication for the benefit
of the public at large and to the detriment of our heirs and
successors. We intend this dedication to be an overt act of
relinquishment in perpetuity of all present and future rights to this
software under copyright law.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.

For more information, please refer to <http://unlicense.org/>
*/

#ifndef PIGPIOD_IF_H
#define PIGPIOD_IF_H

#include "pigpio.h"

#define PIGPIOD_IF_VERSION 5

typedef enum
{
   pigif_bad_send           = -2000,
   pigif_bad_recv           = -2001,
   pigif_bad_getaddrinfo    = -2002,
   pigif_bad_connect        = -2003,
   pigif_bad_socket         = -2004,
   pigif_bad_noib           = -2005,
   pigif_duplicate_callback = -2006,
   pigif_bad_malloc         = -2007,
   pigif_bad_callback       = -2008,
   pigif_notify_failed      = -2009,
   pigif_callback_not_found = -2010,
} pigifError_t;


typedef void (*CBFunc_t)  (unsigned gpio, unsigned level, uint32_t tick);

typedef void (*CBFuncEx_t)
   (unsigned gpio, unsigned level, uint32_t tick, void * user);

typedef struct callback_s callback_t;

#define RISING_EDGE  0
#define FALLING_EDGE 1
#define EITHER_EDGE  2

double time_time(void);
/* Return the current time in seconds since the Epoch.*/

void time_sleep(double seconds);
/* Delay execution for a given number of seconds */

const char *pigpio_error(int error);
/* Return a string for a pigpio library error. */

unsigned pigpiod_if_version(void);
/* Return the pigpiod_if version. */

pthread_t *start_thread(gpioThreadFunc_t func, void *arg);
/* Starts a new thread of execution with func as the main routine.

   Returns a pointer to pthread_t if OK, otherwise NULL.

   The function is passed the single argument arg.

   The thread can be cancelled by passing the pointer to pthread_t to
   stop_thread().
*/

void stop_thread(pthread_t *pth);
/* Cancels the thread pointed at by pth.

   No value is returned.

   The thread to be stopped should have been started with start_thread().
*/

int pigpio_start(char *addrStr, char *portStr);
/* Connect to the pigpio daemon.  Reserving command and
   notification streams.

   addrStr specifies the host or IP address of the Pi running
   the pigpio daemon.  It may be NULL in which case localhost
   is used unless overriden by the PIGPIO_ADDR environment
   variable.

   portStr specifies the port address used by the Pi running
   the pigpio daemon.  It may be NULL in which case "8888"
   is used unless overriden by the PIGPIO_PORT environment
   variable.
*/

void pigpio_stop(void);
/*
   Terminates the connection to the pigpio daemon and releases
   resources used by the library.
*/

int set_mode(unsigned gpio, unsigned mode);
/* Set the gpio mode.

   gpio: 0-53.
   mode: INPUT, OUTPUT, ALT0, ALT1, ALT2, ALT3, ALT4, ALT5.

   Returns 0 if OK, otherwise PI_BAD_GPIO, PI_BAD_MODE,
   or PI_NOT_PERMITTED.
*/

int get_mode(unsigned gpio);
/* Get the gpio mode.

   Returns the gpio mode if OK, otherwise PI_BAD_GPIO.

   gpio: 0-53.
*/

int set_pull_up_down(unsigned gpio, unsigned pud);
/* Set or clear the gpio pull-up/down resistor.

   Returns 0 if OK, otherwise PI_BAD_GPIO, PI_BAD_PUD,
   or PI_NOT_PERMITTED.

   gpio: 0-53.
   pud:  PUD_UP, PUD_DOWN, PUD_OFF.
*/

int gpio_read(unsigned gpio);
/* Read the gpio level.

   Returns the gpio level if OK, otherwise PI_BAD_GPIO.

   gpio:0-53.
*/

int gpio_write(unsigned gpio, unsigned level);
/*
   Write the gpio level.

   Returns 0 if OK, otherwise PI_BAD_GPIO, PI_BAD_LEVEL,
   or PI_NOT_PERMITTED.

   gpio:  0-53.
   level: 0, 1.

   Notes

   If PWM or servo pulses are active on the gpio they are switched off.
*/

int set_PWM_dutycycle(unsigned user_gpio, unsigned dutycycle);
/* Start (non-zero dutycycle) or stop (0) PWM pulses on the gpio.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_DUTYCYCLE,
   or PI_NOT_PERMITTED.

   user_gpio: 0-31.
   dutycycle: 0-range (range defaults to 255).

   Notes

   The set_PWM_range() function can change the default range of 255.
*/

int set_PWM_range(unsigned user_gpio, unsigned range_);
/* Set the range of PWM values to be used on the gpio.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_DUTYRANGE,
   or PI_NOT_PERMITTED.

   user_gpio: 0-31.
   range_:    25-40000.

   Notes

   If PWM is currently active on the gpio its dutycycle will be
   scaled to reflect the new range.

   The real range, the number of steps between fully off and fully on
   for each of the 18 available gpio frequencies is

   25(#1), 50(#2), 100(#3), 125(#4), 200(#5), 250(#6), 400(#7),
   500(#8), 625(#9), 800(#10), 1000(#11), 1250(#12), 2000(#13),
   2500(#14), 4000(#15), 5000(#16), 10000(#17), 20000(#18)

   The real value set by set_PWM_range is
   (dutycycle * real range) / range.
*/

int get_PWM_range(unsigned user_gpio);
/* Get the range of PWM values being used on the gpio.

   Returns the dutycycle range used for the gpio if OK,
   otherwise PI_BAD_USER_GPIO.

   user_gpio: 0-31.
*/

int get_PWM_real_range(unsigned user_gpio);
/* Get the real underlying range of PWM values being used on the gpio.

   Returns the real range used for the gpio if OK,
   otherwise PI_BAD_USER_GPIO.

   user_gpio: 0-31.
*/

int set_PWM_frequency(unsigned user_gpio, unsigned frequency);
/*
   Set the frequency (in Hz) of the PWM to be used on the gpio.

   Returns the numerically closest frequency if OK, otherwise
   PI_BAD_USER_GPIO or PI_NOT_PERMITTED.

   user_gpio: 0-31.
   frequency: 0- (Hz).

   The selectable frequencies depend upon the sample rate which
   may be 1, 2, 4, 5, 8, or 10 microseconds (default 5).  The
   sample rate is set when the C pigpio library is started.

   Each gpio can be independently set to one of 18 different
   PWM frequencies.

   If PWM is currently active on the gpio it will be switched
   off and then back on at the new frequency.

   1us 40000, 20000, 10000, 8000, 5000, 4000, 2500, 2000, 1600,
       1250, 1000, 800, 500, 400, 250, 200, 100, 50

   2us 20000, 10000,  5000, 4000, 2500, 2000, 1250, 1000, 800,
       625, 500, 400, 250, 200, 125, 100, 50, 25

   4us 10000, 5000, 2500, 2000, 1250, 1000, 625, 500, 400,
       313, 250, 200, 125, 100, 63, 50, 25, 13

   5us 8000, 4000, 2000, 1600, 1000, 800, 500, 400, 320,
       250, 200, 160, 100, 80, 50, 40, 20, 10

   8us 5000, 2500, 1250, 1000, 625, 500, 313, 250, 200,
       156, 125, 100, 63, 50, 31, 25, 13, 6

   10us 4000, 2000, 1000, 800, 500, 400, 250, 200, 160,
        125, 100, 80, 50, 40, 25, 20, 10, 5
*/

int get_PWM_frequency(unsigned user_gpio);
/*
   Get the frequency of PWM being used on the gpio.

   Returns the frequency (in hertz) used for the gpio if OK,
   otherwise PI_BAD_USER_GPIO.

   user_gpio: 0-31.
*/

int set_servo_pulsewidth(unsigned user_gpio, unsigned pulsewidth);
/*
   Start (500-2500) or stop (0) servo pulses on the gpio.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_PULSEWIDTH or
   PI_NOT_PERMITTED.

   user_gpio:  0-31.
   pulsewidth: 0 (off), 500 (most anti-clockwise) - 2500 (most clockwise).

   The selected pulsewidth will continue to be transmitted until
   changed by a subsequent call to set_servo_pulsewidth().

   The pulsewidths supported by servos varies and should probably be
   determined by experiment. A value of 1500 should always be safe and
   represents the mid-point of rotation.

   You can DAMAGE a servo if you command it to move beyond its limits.

   OTHER UPDATE RATES:

   This function updates servos at 50Hz.  If you wish to use a different
   update frequency you will have to use the PWM functions.

   Update Rate (Hz) 50   100  200  400  500
   1E6/Hz        20000 10000 5000 2500 2000

   Firstly set the desired PWM frequency using set_PWM_frequency().

   Then set the PWM range using set_PWM_range() to 1E6/Hz.
   Doing this allows you to use units of microseconds when setting
   the servo pulse width.

   E.g. If you want to update a servo connected to gpio 25 at 400Hz

   set_PWM_frequency(25, 400);
   set_PWM_range(25, 2500);

   Thereafter use the set_PWM_dutycycle() function to move the servo,
   e.g. set_PWM_dutycycle(25, 1500) will set a 1500 us pulse. 
*/

int notify_open(void);
/*
   Get a free notification handle.

   Returns a handle greater than or equal to zero if OK,
   otherwise PI_NO_HANDLE.

   A notification is a method for being notified of gpio state
   changes via a pipe.

   Pipes are only accessible from the local machine so this function
   serves no purpose if you are using the library from a remote machine.
   The in-built (socket) notifications provided by callback()
   should be used instead.

   Notifications for handle x will be available at the pipe
   named /dev/pigpiox (where x is the handle number).
   E.g. if the function returns 15 then the notifications must be
   read from /dev/pigpio15.
*/

int notify_begin(unsigned handle, uint32_t bits);
/*
   Start notifications on a previously opened handle.

   Returns 0 if OK, otherwise PI_BAD_HANDLE.

   handle: 0-31 (as returned by notify_open())
   bits:   a mask indicating the gpios to be notified.

   The notification sends state changes for each gpio whose
   corresponding bit in bits is set.

   Notes

   Each notification occupies 12 bytes in the fifo as follows:

   H (16 bit) seqno
   H (16 bit) flags
   I (32 bit) tick
   I (32 bit) level
*/

int notify_pause(unsigned handle);
/*
   Pause notifications on a previously opened handle.

   Returns 0 if OK, otherwise PI_BAD_HANDLE.

   handle: 0-31 (as returned by notify_open())

   Notifications for the handle are suspended until
   notify_begin() is called again.
*/

int notify_close(unsigned handle);
/*
   Stop notifications on a previously opened handle and
   release the handle for reuse.

   Returns 0 if OK, otherwise PI_BAD_HANDLE.

   handle: 0-31 (as returned by notify_open())
*/

int set_watchdog(unsigned user_gpio, unsigned timeout);
/*
   Sets a watchdog for a gpio.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO
   or PI_BAD_WDOG_TIMEOUT.

   user_gpio: 0-31.
   timeout:   0-60000.

   The watchdog is nominally in milliseconds.

   Only one watchdog may be registered per gpio.

   The watchdog may be cancelled by setting timeout to 0.

   If no level change has been detected for the gpio for timeout
   milliseconds any notification for the gpio has a report written
   to the fifo with the flags set to indicate a watchdog timeout.

   The callback() and callback_ex functions interpret the flags and will
   call registered callbacks for the gpio with level TIMEOUT.
*/

uint32_t read_bank_1(void);
/*
   Read the levels of the bank 1 gpios (gpios 0-31).

   The returned 32 bit integer has a bit set if the corresponding
   gpio is logic 1.  Gpio n has bit value (1<<n).
*/

uint32_t read_bank_2(void);
/*
   Read the levels of the bank 2 gpios (gpios 32-53).

   The returned 32 bit integer has a bit set if the corresponding
   gpio is logic 1.  Gpio n has bit value (1<<(n-32)).
*/

int clear_bank_1(uint32_t levels);
/*
   Clears gpios 0-31 if the corresponding bit in levels is set.

   Returns 0 if OK, otherwise PI_SOME_PERMITTED.

   A status of PI_SOME_PERMITTED indicates that the user is not
   allowed to write to one or more of the gpios.

   levels: a bit mask with 1 set if the corresponding gpio is
           to be cleared.
*/

int clear_bank_2(uint32_t levels);
/*
   Clears gpios 32-53 if the corresponding bit (0-21) in levels is set.

   Returns 0 if OK, otherwise PI_SOME_PERMITTED.

   A status of PI_SOME_PERMITTED indicates that the user is not
   allowed to write to one or more of the gpios.

   levels: a bit mask with 1 set if the corresponding gpio is
           to be cleared.
*/

int set_bank_1(uint32_t levels);
/*
   Sets gpios 0-31 if the corresponding bit in levels is set.

   Returns 0 if OK, otherwise PI_SOME_PERMITTED.

   A status of PI_SOME_PERMITTED indicates that the user is not
   allowed to write to one or more of the gpios.

   levels: a bit mask with 1 set if the corresponding gpio is
           to be set.
*/

int set_bank_2(uint32_t levels);
/*
   Sets gpios 32-53 if the corresponding bit (0-21) in levels is set.

   Returns 0 if OK, otherwise PI_SOME_PERMITTED.

   A status of PI_SOME_PERMITTED indicates that the user is not
   allowed to write to one or more of the gpios.

   levels: a bit mask with 1 set if the corresponding gpio is
           to be set.
*/

uint32_t get_current_tick(void);
/*

   Gets the current system tick.

   Tick is the number of microseconds since system boot.

   As tick is an unsigned 32 bit quantity it wraps around after
   2**32 microseconds, which is approximately 1 hour 12 minutes.

*/

uint32_t get_hardware_revision(void);
/*
   Get the Pi's hardware revision number.

   It is unfortunate that Pi boards have been named Revision.1 and
   Revision.2.  That use of the word revision is distinct from the
   Pi's hardware revision number.'

   The hardware revision is the last 4 characters on the Revision line
   of /proc/cpuinfo.

   The revision number can be used to determine the assignment of gpios
   to pins.

   There are at least two types of board.

   Type 1 has gpio 0 on P1-3, gpio 1 on P1-5, and gpio 21 on P1-13.
   Type 2 has gpio 2 on P1-3, gpio 3 on P1-5, gpio 27 on P1-13, and
   gpios 28-31 on P5.

   Type 1 boards have hardware revision numbers of 2 and 3.

   Type 2 boards have hardware revision numbers of 4, 5, 6, and 15.

   If the hardware revision can not be found or is not a valid
   hexadecimal number the function returns 0.
*/

uint32_t get_pigpio_version(void);
/*
   Returns the pigpio version.
*/


int wave_clear(void);
/* This function clears all waveforms and any data added by calls to the
   wave_add_* functions.

   Returns 0 if OK.
*/

int wave_add_new(void);
/* This function starts a new empty waveform.  You wouldn't normally need
   to call this function as it is automatically called after a waveform is
   created with the wave_create function.

   Returns 0 if OK.
*/

int wave_add_generic(unsigned numPulses, gpioPulse_t *pulses);
/* This function adds a number of pulses to the current waveform.

   Returns the new total number of pulses in the current waveform if OK,
   otherwise PI_TOO_MANY_PULSES.

   The pulses are interleaved in time order within the existing waveform
   (if any).

   Merging allows the waveform to be built in parts, that is the settings
   for gpio#1 can be added, and then gpio#2 etc.

   If the added waveform is intended to start after or within the existing
   waveform then the first pulse should consist solely of a delay.
*/

int wave_add_serial
   (unsigned gpio, unsigned baud, unsigned offset, unsigned numChar, char *str);
/* This function adds a waveform representing serial data to the
   existing waveform (if any).  The serial data starts offset microseconds
   from the start of the waveform.

   Returns the new total number of pulses in the current waveform if OK,
   otherwise PI_BAD_USER_GPIO, PI_BAD_WAVE_BAUD, PI_TOO_MANY_CHARS, or
   PI_TOO_MANY_PULSES.

   NOTES:

   The serial data is formatted as one start bit, eight data bits, and one
   stop bit.

   It is legal to add serial data streams with different baud rates to
   the same waveform.
*/

int wave_create(void);
/* This function creates a waveform from the data provided by the prior
   calls to the wave_add_* functions.  Upon success a positive wave id
   is returned.

   The data provided by the wave_add_* functions is consumed by this
   function.

   As many waveforms may be created as there is space available.  The
   wave id is passed to wave_send_* to specify the waveform to transmit.

   Normal usage would be

   Step 1. wave_clear to clear all waveforms and added data.

   Step 2. wave_add_* calls to supply the waveform data.

   Step 3. wave_create to create the waveform and get a unique id

   Repeat steps 2 and 3 as needed.

   Step 4. wave_send_* with the id of the waveform to transmit.

   A waveform comprises one or more pulses.  Each pulse consists of a
   gpioPulse_t structure.

   typedef struct
   {
      uint32_t gpioOn;
      uint32_t gpioOff;
      uint32_t usDelay;
   } gpioPulse_t;

   The fields specify

   1) the gpios to be switched on at the start of the pulse.
   2) the gpios to be switched off at the start of the pulse.
   3) the delay in microseconds before the next pulse.

   Any or all the fields can be zero.  It doesn't make any sense to
   set all the fields to zero (the pulse will be ignored).

   When a waveform is started each pulse is executed in order with the
   specified delay between the pulse and the next.

   Returns the new waveform id if OK, otherwise PI_EMPTY_WAVEFORM,
   PI_NO_WAVEFORM_ID, PI_TOO_MANY_CBS, or PI_TOO_MANY_OOL.
*/


int wave_delete(unsigned wave_id);
/* This function deletes all created waveforms with ids greater than or
   equal to wave_id.

   Wave ids are allocated in order, 0, 1, 2, etc.

   Returns 0 if OK, otherwise PI_BAD_WAVE_ID.
*/

int wave_tx_start(void);
/* This function is deprecated and should no longer be used.  Use
   wave_create/wave_send_* instead.
*/

int wave_tx_repeat(void);
/* This function is deprecated and should no longer be used.  Use
   wave_create/wave_send_* instead.
*/

int wave_send_once(unsigned wave_id);
/* This function transmits the waveform with id wave_id.  The waveform
   is sent once.

   Returns the number of DMA control blocks in the waveform if OK,
   otherwise PI_BAD_WAVE_ID, or PI_BAD_WAVE_MODE.
*/

int wave_send_repeat(unsigned wave_id);
/* This function transmits the waveform with id wave_id.  The waveform
   cycles until cancelled (either by the sending of a new waveform or
   by wave_tx_stop).

   Returns the number of DMA control blocks in the waveform if OK,
   otherwise PI_BAD_WAVE_ID, or PI_BAD_WAVE_MODE.
*/


int wave_tx_busy(void);
/* This function checks to see if a waveform is currently being
   transmitted.

   Returns 1 if a waveform is currently being transmitted, otherwise 0.
*/

int wave_tx_stop(void);
/* This function stops the transmission of the current waveform.

   Returns 0 if OK.

   This function is intended to stop a waveform started with the repeat mode.
*/

int wave_get_micros(void);
/* This function returns the length in microseconds of the current
   waveform.
*/

int wave_get_high_micros(void);
/* This function returns the length in microseconds of the longest waveform
   created since the pigpio daemon was started..
*/

int wave_get_max_micros(void);
/* This function returns the maximum possible size of a waveform in 
   microseconds.
*/

int wave_get_pulses(void);
/* This function returns the length in pulses of the current waveform.
*/

int wave_get_high_pulses(void);
/* This function returns the length in pulses of the longest waveform
   created since the pigpio daemon was started..
*/

int wave_get_max_pulses(void);
/* This function returns the maximum possible size of a waveform in pulses.
*/

int wave_get_cbs(void);
/* This function returns the length in DMA control blocks of the current
   waveform.
*/

int wave_get_high_cbs(void);
/* This function returns the length in DMA control blocks of the longest
   waveform created since the pigpio daemon was started..
*/

int wave_get_max_cbs(void);
/* This function returns the maximum possible size of a waveform in DMA
   control blocks.
*/

int gpio_trigger(unsigned gpio, unsigned pulseLen, unsigned level);
/* This function sends a trigger pulse to a gpio.  The gpio is set to
   level for pulseLen microseconds and then reset to not level.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_LEVEL,
   PI_BAD_PULSELEN, or PI_NOT_PERMITTED.
*/

int store_script(char *script);
/* This function stores a script for later execution.

   The function returns a script id if the script is valid,
   otherwise PI_BAD_SCRIPT.
*/

int run_script(unsigned script_id, unsigned numPar, uint32_t *param);
/* This function runs a stored script.

   The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID, or
   PI_TOO_MANY_PARAM

   param is an array of up to 10 parameters which may be referenced in
   the script as param 0 to param 9..
*/

int script_status(unsigned script_id, uint32_t *param);
/* This function returns the run status of a stored script as well
   as the current values of parameters 0 to 9.

   The function returns greater than or equal to 0 if OK,
   otherwise PI_BAD_SCRIPT_ID.

   The run status may be

   PI_SCRIPT_HALTED
   PI_SCRIPT_RUNNING
   PI_SCRIPT_WAITING
   PI_SCRIPT_FAILED

   The current value of script parameters 0 to 9 are returned in param.
*/

int stop_script(unsigned script_id);
/* This function stops a running script.

   The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID.
*/

int delete_script(unsigned script_id);
/* This function deletes a stored script.

   The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID.
*/

int bb_serial_read_open(unsigned user_gpio, unsigned baud);
/* This function opens a gpio for bit-banged reading of serial data.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_WAVE_BAUD,
   or PI_GPIO_IN_USE.

   The serial data is returned in a cyclic buffer and is read using
   bb_serial_read().

   It is the caller's responsibility to read data from the cyclic buffer
   in a timely fashion.
*/

int bb_serial_read(unsigned user_gpio, void *buf, size_t bufSize);
/* This function copies up to bufSize bytes of data read from the
   bit-bang serial cyclic buffer to the buffer starting at buf.

   Returns the number of bytes copied if OK, otherwise PI_BAD_USER_GPIO
   or PI_NOT_SERIAL_GPIO.
*/

int bb_serial_read_close(unsigned user_gpio);
/* This function closes a gpio for bit-banged reading of serial data.

   Returns 0 if OK, otherwise PI_BAD_USER_GPIO, or PI_NOT_SERIAL_GPIO.
*/

int i2c_open(unsigned bus, unsigned addr, unsigned flags);
/* This returns a handle for the device at address addr on I2C bus bus.

   No flags are currently defined.  This parameter should be set to zero.
*/

int i2c_close(unsigned handle);
/* This closes the I2C device associated with the handle.
*/

int i2c_read_device(unsigned handle, char *buf, unsigned count);
/* This reads count bytes from the raw device into buf.
*/

int i2c_write_device(unsigned handle, char *buf, unsigned count);
/* This writes count bytes from buf to the raw device.
*/

int i2c_write_quick(unsigned handle, unsigned bit);
/* This sends a single bit to the device (in the Rd/Wr bit).

   Quick command. smbus 2.0 5.5.1
*/

int i2c_write_byte(unsigned handle, unsigned val);
/* This operation is the reverse of i2cReadByte: it sends a single byte
   to a device.

   Send byte. smbus 2.0 5.5.2
*/

int i2c_read_byte(unsigned handle);
/* This reads a single byte from a device, without specifying a device
   register. Some devices are so simple that this interface is enough;
   for others, it is a shorthand if you want to read the same register
   as in the previous SMBus command.

   Receive byte. smbus 2.0 5.5.3
*/

int i2c_write_byte_data(unsigned handle, unsigned reg, unsigned val);
/* This writes a single byte to a device, to a designated register.
   This is the opposite of the i2cReadByte function.

   Write byte. smbus 2.0 5.5.4
*/

int i2c_write_word_data(unsigned handle, unsigned reg, unsigned val);
/* This is the opposite of the i2cReadWordData operation. 16 bits
   of data is written to a device, to the designated register.

   Write word. smbus 2.0 5.5.4
*/

int i2c_read_byte_data(unsigned handle, unsigned reg);
/* This reads a single byte from a device, from a designated register.

   Read byte. smbus 2.0 5.5.5
*/

int i2c_read_word_data(unsigned handle, unsigned reg);
/* This operation is very like i2cReadByte; again, data is read
   from a device, from a designated register.  But this time, the data
   is a complete word (16 bits).

   Read word. smbus 2.0 5.5.5
*/

int i2c_process_call(unsigned handle, unsigned reg, unsigned val);
/* This command selects a device register, sends 16 bits of data to it,
   and reads 16 bits of data in return.

   Process call. smbus 2.0 5.5.6
*/

int i2c_write_block_data(
   unsigned handle, unsigned reg, char *buf, unsigned count);
/* The opposite of the i2cReadBlockData command, this writes up to
   32 bytes to a device, to a designated register. The amount of data
   is specified in the count byte.

   Block write. smbus 2.0 5.5.7
*/

int i2c_read_block_data(unsigned handle, unsigned reg, char *buf);
/* This command reads a block of up to 32 bytes from a device, from a
   designated register. The amount of returned data is set by the device.

   Block read. smbus 2.0 5.5.7
*/

int i2c_block_process_call(
   unsigned handle, unsigned reg, char *buf, unsigned count);
/* This command selects a device register, sends count bytes of data
   to it, and reads a device specified number of bytes of data in return.

   The smbus 2.0 documentation states that a minimum of 1 byte may be
   sent and a minimum of 1 byte may be received.  The total number of
   bytes sent/received must be 32 or less.

   Block write-block read. smbus 2.0 5.5.8
*/

int i2c_read_i2c_block_data(
   unsigned handle, unsigned reg, char *buf, unsigned count);
/* This command reads a block of bytes from a device, from a 
   designated register.  The count may be 1-32.
*/


int i2c_write_i2c_block_data(
   unsigned handle, unsigned reg, char *buf, unsigned count);
/* The opposite of the i2cReadI2CBlockData command, this writes bytes to 
   a device, to a designated register.. Note that command lengths of 0, 2,
   or more bytes are supported as they are indistinguishable from data.
   Count may be 1-32.
*/

int spi_open(unsigned channel, unsigned speed, unsigned flags);
/* This function returns a handle for the SPI device on channel.
   Data will be transferred at speed bits per second.

   The bottom two bits of flags define the SPI mode as follows.
        bit bit
         1   0
   Mode POL PHA
    0    0   0
    1    0   1
    2    1   0
    3    1   1

   The other bits in flags should be set to zero.
*/

int spi_close(unsigned handle);
/* This functions closes the SPI device identified by the handle.
*/

int spi_read(unsigned handle, char *buf, unsigned count);
/* This function reads count bytes of data from the SPI
   device associated with the handle.
*/

int spi_write(unsigned handle, char *buf, unsigned count);
/* This function writes count bytes of data from buf to the SPI
   device associated with the handle.
*/

int spi_xfer(unsigned handle, char *txBuf, char *rxBuf, unsigned count);
/* This function writes count bytes of data from txBuf to the SPI
   device associated with the handle.

   The data read from the device is written to rxBuf.
*/

int serial_open(char *dev, unsigned baud, unsigned flags);
/* This function open the serial device named dev at baud bits per second.

   No flags are currently defined.  This parameter should be set to zero.
*/

int serial_close(unsigned handle);
/* This function closes the serial device associated with handle.
*/

int serial_write_byte(unsigned handle, unsigned val);
/* This function writes val to the serial port associated with handle.
*/

int serial_read_byte(unsigned handle);
/* This function reads a byte from the serial port associated with handle.
*/

int serial_write(unsigned handle, char *buf, unsigned count);
/* This function writes count bytes from buf to the the serial port
   associated with handle.
*/

int serial_read(unsigned handle, char *buf, unsigned count);
/* This function reads count bytes from the the serial port
   associated with handle and writes them to buf.
*/

int serial_data_available(unsigned handle);
/* Returns the number of bytes available to be read from the
   device associated with handle.
*/

int callback(unsigned gpio, unsigned edge, CBFunc_t f);
/*
   This function initialises a new callback.

   The function returns a callback id if OK, otherwise pigif_bad_malloc,
   pigif_duplicate_callback, or pigif_bad_callback.

   The callback is called with the gpio, edge, and tick, whenever the
   gpio has the identified edge.
*/

int callback_ex(unsigned gpio, unsigned edge, CBFuncEx_t f, void *user);
/*
   This function initialises a new callback.

   The function returns a callback id if OK, otherwise pigif_bad_malloc,
   pigif_duplicate_callback, or pigif_bad_callback.

   The callback is called with the gpio, edge, tick, and user, whenever
   the gpio has the identified edge.
*/

int callback_cancel(unsigned id);
/*
   This function cancels a callback identified by its id.

   The function returns 0 if OK, otherwise pigif_callback_not_found.
*/

int wait_for_edge(unsigned gpio, unsigned edge, double timeout);
/*
   This function waits for edge on the gpio for up to timeout
   seconds.

   The function returns 1 if the edge occurred, otherwise 0.

   The function returns when the edge occurs or after the timeout.
*/

#endif