mirror of https://github.com/joan2937/pigpio
Merge branch 'bennuttall-pi-repr' of https://github.com/bennuttall/pigpio into bennuttall-bennuttall-pi-repr
This commit is contained in:
joan
commit
f99a4c7224
103
pigpio.py
103
pigpio.py
|
|
@ -2191,8 +2191,8 @@ class pi():
|
|||
|
||||
The bytes required for each character depend upon [*bb_bits*].
|
||||
|
||||
For [*bb_bits*] 1-8 there will be one byte per character.
|
||||
For [*bb_bits*] 9-16 there will be two bytes per character.
|
||||
For [*bb_bits*] 1-8 there will be one byte per character.
|
||||
For [*bb_bits*] 9-16 there will be two bytes per character.
|
||||
For [*bb_bits*] 17-32 there will be four bytes per character.
|
||||
|
||||
...
|
||||
|
|
@ -2253,8 +2253,8 @@ class pi():
|
|||
|
||||
A pulse specifies
|
||||
|
||||
1) the GPIO to be switched on at the start of the pulse.
|
||||
2) the GPIO to be switched off at the start of the pulse.
|
||||
1) the GPIO to be switched on at the start of the pulse.
|
||||
2) the GPIO to be switched off at the start of the pulse.
|
||||
3) the delay in microseconds before the next pulse.
|
||||
|
||||
Any or all the fields can be zero. It doesn't make any sense
|
||||
|
|
@ -2389,7 +2389,7 @@ class pi():
|
|||
Returns the waveform id or one of the following special
|
||||
values:
|
||||
|
||||
WAVE_NOT_FOUND (9998) - transmitted wave not found.
|
||||
WAVE_NOT_FOUND (9998) - transmitted wave not found.
|
||||
NO_TX_WAVE (9999) - no wave being transmitted.
|
||||
|
||||
...
|
||||
|
|
@ -2616,7 +2616,7 @@ class pi():
|
|||
S (1 bit) : Start bit
|
||||
P (1 bit) : Stop bit
|
||||
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
|
||||
A, NA (1 bit) : Accept and not accept bit.
|
||||
A, NA (1 bit) : Accept and not accept bit.
|
||||
Addr (7 bits): I2C 7 bit address.
|
||||
reg (8 bits): Command byte, which often selects a register.
|
||||
Data (8 bits): A data byte.
|
||||
|
|
@ -3187,7 +3187,7 @@ class pi():
|
|||
SCLK := 0-31
|
||||
baud := 50-250000
|
||||
spiFlags := see below
|
||||
|
||||
|
||||
spiFlags consists of the least significant 22 bits.
|
||||
|
||||
. .
|
||||
|
|
@ -3250,7 +3250,7 @@ class pi():
|
|||
# I SCLK
|
||||
# I baud
|
||||
# I spi_flags
|
||||
|
||||
|
||||
extents = [struct.pack("IIIII", MISO, MOSI, SCLK, baud, spi_flags)]
|
||||
return _u2i(_pigpio_command_ext(
|
||||
self.sl, _PI_CMD_BSPIO, CS, 0, 20, extents))
|
||||
|
|
@ -3352,9 +3352,9 @@ class pi():
|
|||
Bit banging I2C allows for certain operations which are not possible
|
||||
with the standard I2C driver.
|
||||
|
||||
o baud rates as low as 50
|
||||
o repeated starts
|
||||
o clock stretching
|
||||
o baud rates as low as 50
|
||||
o repeated starts
|
||||
o clock stretching
|
||||
o I2C on any pair of spare GPIO
|
||||
|
||||
SDA:= 0-31
|
||||
|
|
@ -3808,8 +3808,8 @@ class pi():
|
|||
transfer data packed into 1, 2, or 4 bytes according to
|
||||
the word size in bits.
|
||||
|
||||
For bits 1-8 there will be one byte per character.
|
||||
For bits 9-16 there will be two bytes per character.
|
||||
For bits 1-8 there will be one byte per character.
|
||||
For bits 9-16 there will be two bytes per character.
|
||||
For bits 17-32 there will be four bytes per character.
|
||||
|
||||
Multi-byte transfers are made in least significant byte
|
||||
|
|
@ -4381,8 +4381,8 @@ class pi():
|
|||
data bits [*bb_bits*] specified in the [*bb_serial_read_open*]
|
||||
command.
|
||||
|
||||
For [*bb_bits*] 1-8 there will be one byte per character.
|
||||
For [*bb_bits*] 9-16 there will be two bytes per character.
|
||||
For [*bb_bits*] 1-8 there will be one byte per character.
|
||||
For [*bb_bits*] 9-16 there will be two bytes per character.
|
||||
For [*bb_bits*] 17-32 there will be four bytes per character.
|
||||
|
||||
...
|
||||
|
|
@ -4398,7 +4398,7 @@ class pi():
|
|||
rdata = self._rxbuf(bytes)
|
||||
return bytes, rdata
|
||||
|
||||
|
||||
|
||||
def bb_serial_read_close(self, user_gpio):
|
||||
"""
|
||||
Closes a GPIO for bit bang reading of serial data.
|
||||
|
|
@ -5015,7 +5015,7 @@ class pi():
|
|||
host:= the host name of the Pi on which the pigpio daemon is
|
||||
running. The default is localhost unless overridden by
|
||||
the PIGPIO_ADDR environment variable.
|
||||
|
||||
|
||||
port:= the port number on which the pigpio daemon is listening.
|
||||
The default is 8888 unless overridden by the PIGPIO_PORT
|
||||
environment variable. The pigpio daemon must have been
|
||||
|
|
@ -5084,7 +5084,7 @@ class pi():
|
|||
|
||||
s = "Can't connect to pigpio at {}({})".format(host, str(port))
|
||||
|
||||
|
||||
|
||||
print(_except_a.format(s))
|
||||
if exception == 1:
|
||||
print(_except_1)
|
||||
|
|
@ -5094,6 +5094,9 @@ class pi():
|
|||
print(_except_3)
|
||||
print(_except_z)
|
||||
|
||||
def __repr__(self):
|
||||
return "<pipio.pi host={} port={}>".format(self._host, self._port)
|
||||
|
||||
def stop(self):
|
||||
"""Release pigpio resources.
|
||||
|
||||
|
|
@ -5205,8 +5208,8 @@ def xref():
|
|||
edge: 0-2
|
||||
|
||||
. .
|
||||
EITHER_EDGE = 2
|
||||
FALLING_EDGE = 1
|
||||
EITHER_EDGE = 2
|
||||
FALLING_EDGE = 1
|
||||
RISING_EDGE = 0
|
||||
. .
|
||||
|
||||
|
|
@ -5409,10 +5412,10 @@ def xref():
|
|||
handle: >=0
|
||||
A number referencing an object opened by one of the following
|
||||
|
||||
[*file_open*]
|
||||
[*i2c_open*]
|
||||
[*notify_open*]
|
||||
[*serial_open*]
|
||||
[*file_open*]
|
||||
[*i2c_open*]
|
||||
[*notify_open*]
|
||||
[*serial_open*]
|
||||
[*spi_open*]
|
||||
|
||||
host:
|
||||
|
|
@ -5434,12 +5437,12 @@ def xref():
|
|||
level: 0-1 (2)
|
||||
|
||||
. .
|
||||
CLEAR = 0
|
||||
HIGH = 1
|
||||
LOW = 0
|
||||
OFF = 0
|
||||
ON = 1
|
||||
SET = 1
|
||||
CLEAR = 0
|
||||
HIGH = 1
|
||||
LOW = 0
|
||||
OFF = 0
|
||||
ON = 1
|
||||
SET = 1
|
||||
TIMEOUT = 2 # only returned for a watchdog timeout
|
||||
. .
|
||||
|
||||
|
|
@ -5451,22 +5454,22 @@ def xref():
|
|||
1.The operational mode of a GPIO, normally INPUT or OUTPUT.
|
||||
|
||||
. .
|
||||
ALT0 = 4
|
||||
ALT1 = 5
|
||||
ALT2 = 6
|
||||
ALT3 = 7
|
||||
ALT4 = 3
|
||||
ALT5 = 2
|
||||
INPUT = 0
|
||||
ALT0 = 4
|
||||
ALT1 = 5
|
||||
ALT2 = 6
|
||||
ALT3 = 7
|
||||
ALT4 = 3
|
||||
ALT5 = 2
|
||||
INPUT = 0
|
||||
OUTPUT = 1
|
||||
. .
|
||||
|
||||
2. The mode of waveform transmission.
|
||||
|
||||
. .
|
||||
WAVE_MODE_ONE_SHOT = 0
|
||||
WAVE_MODE_REPEAT = 1
|
||||
WAVE_MODE_ONE_SHOT_SYNC = 2
|
||||
WAVE_MODE_ONE_SHOT = 0
|
||||
WAVE_MODE_REPEAT = 1
|
||||
WAVE_MODE_ONE_SHOT_SYNC = 2
|
||||
WAVE_MODE_REPEAT_SYNC = 3
|
||||
. .
|
||||
|
||||
|
|
@ -5493,7 +5496,7 @@ def xref():
|
|||
When scripts are started they can receive up to 10 parameters
|
||||
to define their operation.
|
||||
|
||||
port:
|
||||
port:
|
||||
The port used by the pigpio daemon, defaults to 8888.
|
||||
|
||||
pstring:
|
||||
|
|
@ -5501,9 +5504,9 @@ def xref():
|
|||
|
||||
pud: 0-2
|
||||
. .
|
||||
PUD_DOWN = 1
|
||||
PUD_OFF = 0
|
||||
PUD_UP = 2
|
||||
PUD_DOWN = 1
|
||||
PUD_OFF = 0
|
||||
PUD_UP = 2
|
||||
. .
|
||||
|
||||
pulse_len: 1-100
|
||||
|
|
@ -5554,9 +5557,9 @@ def xref():
|
|||
Direction to seek for [*file_seek*].
|
||||
|
||||
. .
|
||||
FROM_START=0
|
||||
FROM_CURRENT=1
|
||||
FROM_END=2
|
||||
FROM_START=0
|
||||
FROM_CURRENT=1
|
||||
FROM_END=2
|
||||
. .
|
||||
|
||||
seek_offset:
|
||||
|
|
@ -5619,8 +5622,8 @@ def xref():
|
|||
wave_add_*:
|
||||
One of the following
|
||||
|
||||
[*wave_add_new*]
|
||||
[*wave_add_generic*]
|
||||
[*wave_add_new*]
|
||||
[*wave_add_generic*]
|
||||
[*wave_add_serial*]
|
||||
|
||||
wave_id: >=0
|
||||
|
|
@ -5629,7 +5632,7 @@ def xref():
|
|||
wave_send_*:
|
||||
One of the following
|
||||
|
||||
[*wave_send_once*]
|
||||
[*wave_send_once*]
|
||||
[*wave_send_repeat*]
|
||||
|
||||
wdog_timeout: 0-60000
|
||||
|
|
|
|||
Loading…
Reference in New Issue