/*
This is free and unencumbered software released into the public domain.
Anyone is free to copy, modify, publish, use, compile, sell, or
distribute this software, either in source code form or as a compiled
binary, for any purpose, commercial or non-commercial, and by any
means.
In jurisdictions that recognize copyright laws, the author or authors
of this software dedicate any and all copyright interest in the
software to the public domain. We make this dedication for the benefit
of the public at large and to the detriment of our heirs and
successors. We intend this dedication to be an overt act of
relinquishment in perpetuity of all present and future rights to this
software under copyright law.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
For more information, please refer to
*/
#ifndef PIGPIO_H
#define PIGPIO_H
#include
#include
#define PIGPIO_VERSION 21
/*TEXT
pigpio is a C library for the Raspberry which allows control of the gpios.
*Features*
o PWM on any of gpios 0-31
o servo pulses on any of gpios 0-31
o callbacks when any of gpios 0-31 change state
o callbacks at timed intervals
o reading/writing all of the gpios in a bank as one operation
o individually setting gpio modes, reading and writing
o notifications when any of gpios 0-31 change state
o the construction of output waveforms with microsecond timing
o rudimentary permission control over gpios
o a simple interface to start and stop new threads
o I2C, SPI, and serial link wrappers
o creating and running scripts
*gpios*
ALL gpios are identified by their Broadcom number.
*Credits*
The PWM and servo pulses are timed using the DMA and PWM peripherals.
This use was inspired by Richard Hirst's servoblaster kernel module.
[https://github.com/richardghirst/PiBits/tree/master/ServoBlaster]
*Usage*
Include in your source files.
Assuming your source is in prog.c use the following command to build and
run the executable.
. .
gcc -o prog prog.c -lpigpio -lpthread -lrt
sudo ./prog
. .
For examples of usage see the C programs within the pigpio archive file.
*Notes*
All the functions which return an int return < 0 on error.
If the library isn't initialised all but the [*gpioCfg**], [*gpioVersion*],
and [*gpioHardwareRevision*] functions will return PI_NOT_INITIALISED.
If the library is initialised the [*gpioCfg**] functions will
return PI_INITIALISED.
TEXT*/
/*OVERVIEW
ESSENTIAL
gpioInitialise Initialise library
gpioTerminate Stop library
BEGINNER
gpioSetMode Set a gpio mode
gpioGetMode Get a gpio mode
gpioSetPullUpDown Set/clear gpio pull up/down resistor
gpioRead Read a gpio
gpioWrite Write a gpio
gpioPWM Start/stop PWM pulses on a gpio
gpioServo Start/stop servo pulses on a gpio
gpioDelay Delay for a number of microseconds
gpioSetAlertFunc Request a gpio level change callback
gpioSetTimerFunc Request a regular timed callback
INTERMEDIATE
gpioTrigger Send a trigger pulse to a gpio.
gpioSetWatchdog Set a watchdog on a gpio.
gpioSetPWMrange Configure PWM range for a gpio
gpioGetPWMrange Get configured PWM range for a gpio
gpioSetPWMfrequency Configure PWM frequency for a gpio
gpioGetPWMfrequency Get configured PWM frequency for a gpio
gpioRead_Bits_0_31 Read all gpios in bank 1
gpioRead_Bits_32_53 Read all gpios in bank 2
gpioWrite_Bits_0_31_Clear Clear selected gpios in bank 1
gpioWrite_Bits_32_53_Clear Clear selected gpios in bank 2
gpioWrite_Bits_0_31_Set Set selected gpios in bank 1
gpioWrite_Bits_32_53_Set Set selected gpios in bank 2
gpioStartThread Start a new thread
gpioStopThread Stop a previously started thread
ADVANCED
gpioGetPWMrealRange Get underlying PWM range for a gpio
gpioSetAlertFuncEx Request a gpio change callback, extended
gpioSetSignalFunc Request a signal callback
gpioSetSignalFuncEx Request a signal callback, extended
gpioSetGetSamplesFunc Requests a gpio samples callback
gpioSetGetSamplesFuncEx Requests a gpio samples callback, extended
gpioSetTimerFuncEx Request a regular timed callback, extended
gpioNotifyOpen Request a notification handle
gpioNotifyBegin Start notifications for selected gpios
gpioNotifyPause Pause notifications
gpioNotifyClose Close a notification
gpioSerialReadOpen Opens a gpio for bit bang serial reads
gpioSerialRead Reads bit bang serial data from a gpio
gpioSerialReadClose Closes a gpio for bit bang serial reads
SCRIPTS
gpioStoreScript Store a script
gpioRunScript Run a stored script
gpioScriptStatus Get script status and parameters
gpioStopScript Stop a running script
gpioDeleteScript Delete a stored script
WAVES
gpioWaveClear Deletes all waveforms
gpioWaveAddNew Starts a new waveform
gpioWaveAddGeneric Adds a series of pulses to the waveform
gpioWaveAddSerial Adds serial data to the waveform
gpioWaveCreate Creates a waveform from added data
gpioWaveDelete Deletes one or more waveforms
gpioWaveTxSend Transmits a waveform
gpioWaveTxBusy Checks to see if the waveform has ended
gpioWaveTxStop Aborts the current waveform
gpioWaveGetMicros Length in microseconds of the current waveform
gpioWaveGetHighMicros Length of longest waveform so far
gpioWaveGetMaxMicros Absolute maximum allowed micros
gpioWaveGetPulses Length in pulses of the current waveform
gpioWaveGetHighPulses Length of longest waveform so far
gpioWaveGetMaxPulses Absolute maximum allowed pulses
gpioWaveGetCbs Length in cbs of the current waveform
gpioWaveGetHighCbs Length of longest waveform so far
gpioWaveGetMaxCbs Absolute maximum allowed cbs
gpioWaveTxStart Creates/transmits a waveform (DEPRECATED)
I2C
i2cOpen Opens an I2C device
i2cClose Closes an I2C device
i2cReadDevice Reads the raw I2C device
i2cWriteDevice Writes the raw I2C device
i2cWriteQuick smbus write quick
i2cWriteByte smbus write byte
i2cReadByte smbus read byte
i2cWriteByteData smbus write byte data
i2cWriteWordData smbus write word data
i2cReadByteData smbus read byte data
i2cReadWordData smbus read word data
i2cProcessCall smbus process call
i2cWriteBlockData smbus write block data
i2cReadBlockData smbus read block data
i2cBlockProcessCall smbus block process call
i2cWriteI2CBlockData smbus write I2C block data
i2cReadI2CBlockData smbus read I2C block data
SPI
spiOpen Opens a SPI device
spiClose Closes a SPI device
spiRead Reads bytes from a SPI device
spiWrite Writes bytes to a SPI device
spiXfer Transfers bytes with a SPI device
SERIAL
serOpen Opens a serial device (/dev/tty*)
serClose Closes a serial device
serWriteByte Writes a byte to a serial device
serReadByte Reads a byte from a serial device
serWrite Writes bytes to a serial device
serRead Reads bytes from a serial device
serDataAvailable Returns number of bytes ready to be read
CONFIGURATION
gpioCfgBufferSize Configure the gpio sample buffer size
gpioCfgClock Configure the gpio sample rate
gpioCfgDMAchannel Configure the DMA channel (DEPRECATED)
gpioCfgDMAchannels Configure the DMA channels
gpioCfgPermissions Configure the gpio access permissions
gpioCfgInterfaces Configure user interfaces
gpioCfgInternals Configure miscellaneous internals
gpioCfgSocketPort Configure socket port
UTILITIES
gpioTick Get current tick (microseconds)
gpioHardwareRevision Get hardware revision
gpioVersion Get the pigpio version
getBitInBytes Get the value of a bit
putBitInBytes Set the value of a bit
gpioTime Get current time
gpioSleep Sleep for specified time
time_sleep Sleeps for a float number of seconds
time_time Float number of seconds since the epoch
EXPERT
rawWaveAddSPI Not intended for general use
rawWaveAddGeneric Not intended for general use
rawWaveGetOut Not intended for general use
rawWaveSetOut Not intended for general use
rawWaveGetIn Not intended for general use
rawWaveSetIn Not intended for general use
rawDumpWave Not intended for general use
rawDumpScript Not intended for general use
OVERVIEW*/
#define PI_INPFIFO "/dev/pigpio"
#define PI_OUTFIFO "/dev/pigout"
#define PI_ERRFIFO "/dev/pigerr"
#define PI_ENVPORT "PIGPIO_PORT"
#define PI_ENVADDR "PIGPIO_ADDR"
#define PI_LOCKFILE "/var/run/pigpio.pid"
#ifdef __cplusplus
extern "C" {
#endif
typedef struct
{
uint16_t func;
uint16_t size;
} gpioHeader_t;
typedef struct
{
size_t size;
void *ptr;
uint32_t data;
} gpioExtent_t;
typedef struct
{
uint32_t tick;
uint32_t level;
} gpioSample_t;
typedef struct
{
uint16_t seqno;
uint16_t flags;
uint32_t tick;
uint32_t level;
} gpioReport_t;
typedef struct
{
uint32_t gpioOn;
uint32_t gpioOff;
uint32_t usDelay;
} gpioPulse_t;
#define WAVE_FLAG_READ 1
#define WAVE_FLAG_TICK 2
typedef struct
{
uint32_t gpioOn;
uint32_t gpioOff;
uint32_t usDelay;
uint32_t flags;
} rawWave_t;
typedef struct
{
int clk; /* gpio for clock */
int mosi; /* gpio for MOSI */
int miso; /* gpio for MISO */
int ss_pol; /* slave select off state */
int ss_us; /* delay after slave select */
int clk_pol; /* clock off state */
int clk_pha; /* clock phase */
int clk_us; /* clock micros */
} rawSPI_t;
typedef struct { /* linux/arch/arm/mach-bcm2708/include/mach/dma.h */
unsigned long info;
unsigned long src;
unsigned long dst;
unsigned long length;
unsigned long stride;
unsigned long next;
unsigned long pad[2];
} rawCbs_t;
typedef void (*gpioAlertFunc_t) (int gpio,
int level,
uint32_t tick);
typedef void (*gpioAlertFuncEx_t) (int gpio,
int level,
uint32_t tick,
void *userdata);
typedef void (*gpioTimerFunc_t) (void);
typedef void (*gpioTimerFuncEx_t) (void *userdata);
typedef void (*gpioSignalFunc_t) (int signum);
typedef void (*gpioSignalFuncEx_t) (int signum,
void *userdata);
typedef void (*gpioGetSamplesFunc_t) (const gpioSample_t *samples,
int numSamples);
typedef void (*gpioGetSamplesFuncEx_t) (const gpioSample_t *samples,
int numSamples,
void *userdata);
typedef void *(gpioThreadFunc_t) (void *);
/* gpio: 0-53 */
#define PI_MIN_GPIO 0
#define PI_MAX_GPIO 53
/* user_gpio: 0-31 */
#define PI_MAX_USER_GPIO 31
/* level: 0-1 */
#define PI_OFF 0
#define PI_ON 1
#define PI_CLEAR 0
#define PI_SET 1
#define PI_LOW 0
#define PI_HIGH 1
/* level: only reported for gpio timeout, see gpioSetWatchdog */
#define PI_TIMEOUT 2
/* mode: 0-7 */
#define PI_INPUT 0
#define PI_OUTPUT 1
#define PI_ALT0 4
#define PI_ALT1 5
#define PI_ALT2 6
#define PI_ALT3 7
#define PI_ALT4 3
#define PI_ALT5 2
/* pud: 0-2 */
#define PI_PUD_OFF 0
#define PI_PUD_DOWN 1
#define PI_PUD_UP 2
/* dutycycle: 0-range */
#define PI_DEFAULT_DUTYCYCLE_RANGE 255
/* range: 25-40000 */
#define PI_MIN_DUTYCYCLE_RANGE 25
#define PI_MAX_DUTYCYCLE_RANGE 40000
/* pulsewidth: 0, 500-2500 */
#define PI_SERVO_OFF 0
#define PI_MIN_SERVO_PULSEWIDTH 500
#define PI_MAX_SERVO_PULSEWIDTH 2500
#define PI_NOTIFY_SLOTS 32
#define PI_NTFY_FLAGS_WDOG (1 <<5)
#define PI_NTFY_FLAGS_BIT(x) (((x)<<0)&31)
#define PI_WAVE_BLOCKS 4
#define PI_WAVE_MAX_PULSES (PI_WAVE_BLOCKS * 3000)
#define PI_WAVE_MAX_CHARS (PI_WAVE_BLOCKS * 256)
#define PI_WAVE_MIN_BAUD 100
#define PI_WAVE_MAX_BAUD 250000
#define PI_WAVE_MAX_MICROS (30 * 60 * 1000000) /* half an hour */
#define PI_MAX_WAVES 512
/* wave tx mode */
#define PI_WAVE_MODE_ONE_SHOT 0
#define PI_WAVE_MODE_REPEAT 1
/* I2C, SPI, SER */
#define MIN_SPI_SPEED 32000
#define MAX_SPI_SPEED 125000000
#define PI_I2C_SLOTS 32
#define PI_SPI_SLOTS 16
#define PI_SER_SLOTS 8
#define PI_NUM_I2C_BUS 2
#define PI_NUM_AUX_SPI_CHANNEL 3
#define PI_NUM_STD_SPI_CHANNEL 2
#define PI_MAX_I2C_DEVICE_COUNT 8192
#define PI_MAX_SPI_DEVICE_COUNT 8192
#define PI_SPI_FLAGS_BITLEN(x) ((x&63)<<16)
#define PI_SPI_FLAGS_RX_LSB(x) ((x&1)<<15)
#define PI_SPI_FLAGS_TX_LSB(x) ((x&1)<<14)
#define PI_SPI_FLAGS_3WREN(x) ((x&15)<<10)
#define PI_SPI_FLAGS_3WIRE(x) ((x&1)<<9)
#define PI_SPI_FLAGS_AUX_SPI(x) ((x&1)<<8)
#define PI_SPI_FLAGS_RESVD(x) ((x&7)<<5)
#define PI_SPI_FLAGS_CSPOLS(x) ((x&7)<<2)
#define PI_SPI_FLAGS_MODE(x) ((x&3))
/* Longest busy delay */
#define PI_MAX_BUSY_DELAY 100
/* timeout: 0-60000 */
#define PI_MIN_WDOG_TIMEOUT 0
#define PI_MAX_WDOG_TIMEOUT 60000
/* timer: 0-9 */
#define PI_MIN_TIMER 0
#define PI_MAX_TIMER 9
/* millis: 10-60000 */
#define PI_MIN_MS 10
#define PI_MAX_MS 60000
#define PI_MAX_SCRIPTS 32
#define PI_MAX_SCRIPT_TAGS 50
#define PI_MAX_SCRIPT_VARS 150
#define PI_MAX_SCRIPT_PARAMS 10
/* script status */
#define PI_SCRIPT_INITING 0
#define PI_SCRIPT_HALTED 1
#define PI_SCRIPT_RUNNING 2
#define PI_SCRIPT_WAITING 3
#define PI_SCRIPT_FAILED 4
/* signum: 0-63 */
#define PI_MIN_SIGNUM 0
#define PI_MAX_SIGNUM 63
/* timetype: 0-1 */
#define PI_TIME_RELATIVE 0
#define PI_TIME_ABSOLUTE 1
#define PI_MAX_MICS_DELAY 1000000 /* 1 second */
#define PI_MAX_MILS_DELAY 60000 /* 60 seconds */
/* cfgMillis */
#define PI_BUF_MILLIS_MIN 100
#define PI_BUF_MILLIS_MAX 10000
/* cfgMicros: 1, 2, 4, 5, 8, or 10 */
/* cfgPeripheral: 0-1 */
#define PI_CLOCK_PWM 0
#define PI_CLOCK_PCM 1
/* cfgSource: 0-1 */
#define PI_CLOCK_OSC 0
#define PI_CLOCK_PLLD 1
/* DMA channel: 0-14 */
#define PI_MIN_DMA_CHANNEL 0
#define PI_MAX_DMA_CHANNEL 14
#define PI_MAX_PRIMARY_CHANNEL 14
#define PI_MAX_SECONDARY_CHANNEL 6
/* port */
#define PI_MIN_SOCKET_PORT 1024
#define PI_MAX_SOCKET_PORT 32000
/* ifFlags: */
#define PI_DISABLE_FIFO_IF 1
#define PI_DISABLE_SOCK_IF 2
/*F*/
int gpioInitialise(void);
/*D
Initialises the library.
Call before using the other library functions.
Returns the pigpio version number if OK, otherwise PI_INIT_FAILED.
The only exception is the optional [*gpioCfg**] functions, see later.
...
if (gpioInitialise() < 0)
{
// pigpio initialisation failed.
}
else
{
// pigpio initialised okay.
}
...
D*/
/*F*/
void gpioTerminate(void);
/*D
Terminates the library.
Returns nothing.
Call before program exit.
This function resets the DMA and PWM peripherals, releases memory, and
terminates any running threads.
...
gpioTerminate();
...
D*/
/*F*/
int gpioSetMode(unsigned gpio, unsigned mode);
/*D
Sets the gpio mode, typically input or output.
. .
gpio: 0-53
mode: 0-7
. .
Returns 0 if OK, otherwise PI_BAD_GPIO or PI_BAD_MODE.
Arduino style: pinMode.
...
gpioSetMode(17, PI_INPUT); // Set gpio17 as input.
gpioSetMode(18, PI_OUTPUT); // Set gpio18 as output.
gpioSetMode(22,PI_ALT0); // Set gpio22 to alternative mode 0.
...
D*/
/*F*/
int gpioGetMode(unsigned gpio);
/*D
Gets the gpio mode.
. .
gpio: 0-53
. .
Returns the gpio mode if OK, otherwise PI_BAD_GPIO.
...
if (gpioGetMode(17) != PI_ALT0)
{
gpioSetMode(17, PI_ALT0); // set gpio17 to ALT0
}
...
D*/
/*F*/
int gpioSetPullUpDown(unsigned gpio, unsigned pud);
/*D
Sets or clears resistor pull ups or downs on the gpio.
. .
gpio: 0-53
pud: 0-2
. .
Returns 0 if OK, otherwise PI_BAD_GPIO or PI_BAD_PUD.
...
gpioSetPullUpDown(17, PI_PUD_UP); // Sets a pull-up.
gpioSetPullUpDown(18, PI_PUD_DOWN); // Sets a pull-down.
gpioSetPullUpDown(23, PI_PUD_OFF); // Clear any pull-ups/downs.
...
D*/
/*F*/
int gpioRead (unsigned gpio);
/*D
Reads the gpio level, on or off.
. .
gpio: 0-53
. .
Returns the gpio level if OK, otherwise PI_BAD_GPIO.
Arduino style: digitalRead.
...
printf("gpio24 is level %d\n", gpioRead(24));
...
D*/
/*F*/
int gpioWrite(unsigned gpio, unsigned level);
/*D
Sets the gpio level, on or off.
. .
gpio: 0-53
level: 0,1
. .
Returns 0 if OK, otherwise PI_BAD_GPIO or PI_BAD_LEVEL.
If PWM or servo pulses are active on the gpio they are switched off.
Arduino style: digitalWrite
...
gpioWrite(24, 1); // Set gpio24 high.
...
D*/
/*F*/
int gpioPWM(unsigned user_gpio, unsigned dutycycle);
/*D
Starts PWM on the gpio, dutycycle between 0 (off) and range (fully on).
Range defaults to 255.
. .
user_gpio: 0-31
dutycycle: 0-range
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO or PI_BAD_DUTYCYCLE.
Arduino style: analogWrite
This and the servo functionality use the DMA and PWM or PCM peripherals
to control and schedule the pulse lengths and duty cycles.
The [*gpioSetPWMrange*] function may be used to change the default
range of 255.
...
gpioPWM(17, 255); // Sets gpio17 full on.
gpioPWM(18, 128); // Sets gpio18 half on.
gpioPWM(23, 0); // Sets gpio23 full off.
...
D*/
/*F*/
int gpioSetPWMrange(unsigned user_gpio, unsigned range);
/*D
Selects the dutycycle range to be used for the gpio. Subsequent calls
to gpioPWM will use a dutycycle between 0 (off) and range (fully on).
. .
user_gpio: 0-31
range: 25-40000
. .
Returns the real range for the given gpio's frequency if OK,
otherwise PI_BAD_USER_GPIO or PI_BAD_DUTYRANGE.
If PWM is currently active on the gpio its dutycycle will be scaled
to reflect the new range.
The real range, the number of steps between fully off and fully
on for each frequency, is given in the following table.
. .
25, 50, 100, 125, 200, 250, 400, 500, 625,
800, 1000, 1250, 2000, 2500, 4000, 5000, 10000, 20000
. .
The real value set by [*gpioPWM*] is (dutycycle * real range) / range.
...
gpioSetPWMrange(24, 2000); // Now 2000 is fully on
// 1000 is half on
// 500 is quarter on, etc.
...
D*/
/*F*/
int gpioGetPWMrange(unsigned user_gpio);
/*D
Returns the dutycycle range used for the gpio if OK, otherwise
PI_BAD_USER_GPIO.
. .
user_gpio: 0-31
. .
...
r = gpioGetPWMrange(23);
...
D*/
/*F*/
int gpioGetPWMrealRange(unsigned user_gpio);
/*D
Returns the real range used for the gpio if OK, otherwise
PI_BAD_USER_GPIO.
. .
user_gpio: 0-31
. .
...
rr = gpioGetPWMrealRange(17);
...
D*/
/*F*/
int gpioSetPWMfrequency(unsigned user_gpio, unsigned frequency);
/*D
Sets the frequency in hertz to be used for the gpio.
. .
user_gpio: 0-31
frequency: >=0
. .
Returns the numerically closest frequency if OK, otherwise
PI_BAD_USER_GPIO.
The selectable frequencies depend upon the sample rate which
may be 1, 2, 4, 5, 8, or 10 microseconds (default 5).
Each gpio can be independently set to one of 18 different PWM
frequencies.
If PWM is currently active on the gpio it will be
switched off and then back on at the new frequency.
The frequencies for each sample rate are:
. .
Hertz
1: 40000 20000 10000 8000 5000 4000 2500 2000 1600
1250 1000 800 500 400 250 200 100 50
2: 20000 10000 5000 4000 2500 2000 1250 1000 800
625 500 400 250 200 125 100 50 25
4: 10000 5000 2500 2000 1250 1000 625 500 400
313 250 200 125 100 63 50 25 13
sample
rate
(us) 5: 8000 4000 2000 1600 1000 800 500 400 320
250 200 160 100 80 50 40 20 10
8: 5000 2500 1250 1000 625 500 313 250 200
156 125 100 63 50 31 25 13 6
10: 4000 2000 1000 800 500 400 250 200 160
125 100 80 50 40 25 20 10 5
. .
...
gpioSetPWMfrequency(23, 0); // Set gpio23 to lowest frequency.
gpioSetPWMfrequency(24, 500); // Set gpio24 to 500Hz.
gpioSetPWMfrequency(25, 100000); // Set gpio25 to highest frequency.
...
D*/
/*F*/
int gpioGetPWMfrequency(unsigned user_gpio);
/*D
Returns the frequency (in hertz) used for the gpio if OK, otherwise
PI_BAD_USER_GPIO.
. .
user_gpio: 0-31
. .
...
f = gpioGetPWMfrequency(23); // Get frequency used for gpio23.
...
D*/
/*F*/
int gpioServo(unsigned user_gpio, unsigned pulsewidth);
/*D
Starts servo pulses on the gpio, 0 (off), 500 (most anti-clockwise) to
2500 (most clockwise).
. .
user_gpio: 0-31
pulsewidth: 0, 500-2500
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO or PI_BAD_PULSEWIDTH.
The range supported by servos varies and should probably be determined
by experiment. A value of 1500 should always be safe and represents
the mid-point of rotation. You can DAMAGE a servo if you command it
to move beyond its limits.
The following causes an on pulse of 1500 microseconds duration to be
transmitted on gpio 17 at a rate of 50 times per second. This will
command a servo connected to gpio 17 to rotate to its mid-point.
...
gpioServo(17, 1000); // Move servo to safe position anti-clockwise.
gpioServo(23, 1500); // Move servo to centre position.
gpioServo(25, 2000); // Move servo to safe position clockwise.
...
OTHER UPDATE RATES:
This function updates servos at 50Hz. If you wish to use a different
update frequency you will have to use the PWM functions.
. .
PWM Hz 50 100 200 400 500
1E6/Hz 20000 10000 5000 2500 2000
. .
Firstly set the desired PWM frequency using [*gpioSetPWMfrequency*].
Then set the PWM range using [*gpioSetPWMrange*] to 1E6/frequency.
Doing this allows you to use units of microseconds when setting
the servo pulse width.
E.g. If you want to update a servo connected to gpio25 at 400Hz
. .
gpioSetPWMfrequency(25, 400);
gpioSetPWMrange(25, 2500);
. .
Thereafter use the PWM command to move the servo,
e.g. gpioPWM(25, 1500) will set a 1500 us pulse.
D*/
/*F*/
int gpioSetAlertFunc(unsigned user_gpio, gpioAlertFunc_t f);
/*D
Registers a function to be called (a callback) when the specified
gpio changes state.
. .
user_gpio: 0-31
f: the callback function
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO.
One function may be registered per gpio.
The function is passed the gpio, the new level, and the tick.
The alert may be cancelled by passing NULL as the function.
The gpios are sampled at a rate set when the library is started.
If a value isn't specifically set the default of 5 us is used.
The number of samples per second is given in the following table.
. .
samples
per sec
1 1,000,000
2 500,000
sample 4 250,000
rate 5 200,000
(us) 8 125,000
10 100,000
. .
Level changes shorter than the sample rate may be missed.
The thread which calls the alert functions is triggered nominally
1000 times per second. The active alert functions will be called
once per level change since the last time the thread was activated.
i.e. The active alert functions will get all level changes but there
will be a latency.
The tick value is the time stamp of the sample in microseconds, see
[*gpioTick*] for more details.
...
void aFunction(int gpio, int level, uint32_t tick)
{
printf("gpio %d became %d at %d\n", gpio, level, tick);
}
// call aFunction whenever gpio 4 changes state
gpioSetAlertFunc(4, aFunction);
...
D*/
/*F*/
int gpioSetAlertFuncEx(
unsigned user_gpio, gpioAlertFuncEx_t f, void *userdata);
/*D
Registers a function to be called (a callback) when the specified
gpio changes state.
. .
user_gpio: 0-31
f: the callback function
userdata: pointer to arbitrary user data
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO.
One function may be registered per gpio.
The function is passed the gpio, the new level, the tick, and
the userdata pointer.
Only one of [*gpioSetAlertFunc*] or [*gpioSetAlertFuncEx*] can be
registered per gpio.
See [*gpioSetAlertFunc*] for further details.
D*/
/*F*/
int gpioNotifyOpen(void);
/*D
This function requests a free notification handle.
Returns a handle greater than or equal to zero if OK,
otherwise PI_NO_HANDLE.
A notification is a method for being notified of gpio state changes
via a pipe or socket.
Pipe notifications for handle x will be available at the pipe
named /dev/pigpiox (where x is the handle number). E.g. if the
function returns 15 then the notifications must be read
from /dev/pigpio15.
Socket notifications are returned to the socket which requested the
handle.
...
h = gpioNotifyOpen();
if (h >= 0)
{
sprintf(str, "/dev/pigpio%d", h);
fd = open(str, "r");
if (fd >= 0)
{
// Okay.
}
else
{
// Error.
}
}
else
{
// Error.
}
...
D*/
/*F*/
int gpioNotifyBegin(unsigned handle, uint32_t bits);
/*D
This function starts notifications on a previously opened handle.
. .
handle: >=0, as returned by [*gpioNotifyOpen*]
bits: a bit mask indicating the gpios of interest
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
The notification sends state changes for each gpio whose corresponding
bit in bits is set.
Each notification occupies 12 bytes in the fifo and has the
following structure.
. .
typedef struct
{
uint16_t seqno;
uint16_t flags;
uint32_t tick;
uint32_t level;
} gpioReport_t;
. .
seqno starts at 0 each time the handle is opened and then increments
by one for each report.
flags, if bit 5 is set then bits 0-4 of the flags indicate a gpio
which has had a watchdog timeout.
tick is the number of microseconds since system boot.
level indicates the level of each gpio.
...
// Start notifications for gpios 1, 4, 6, 7, 10.
// 1
// 0 76 4 1
// (1234 = 0x04D2 = 0b0000010011010010)
gpioNotifyBegin(h, 1234);
...
D*/
/*F*/
int gpioNotifyPause(unsigned handle);
/*D
This function pauses notifications on a previously opened handle.
. .
handle: >=0, as returned by [*gpioNotifyOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
Notifications for the handle are suspended until [*gpioNotifyBegin*]
is called again.
...
gpioNotifyPause(h);
...
D*/
/*F*/
int gpioNotifyClose(unsigned handle);
/*D
This function stops notifications on a previously opened handle
and releases the handle for reuse.
. .
handle: >=0, as returned by [*gpioNotifyOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
...
gpioNotifyClose(h);
...
D*/
/*F*/
int gpioWaveClear(void);
/*D
This function clears all waveforms and any data added by calls to the
[*gpioWaveAdd**] functions.
Returns 0 if OK.
...
gpioWaveClear();
...
D*/
/*F*/
int gpioWaveAddNew(void);
/*D
This function starts a new empty waveform.
You wouldn't normally need to call this function as it is automatically
called after a waveform is created with the [*gpioWaveCreate*] function.
Returns 0 if OK.
...
gpioWaveAddNew();
...
D*/
/*F*/
int gpioWaveAddGeneric(unsigned numPulses, gpioPulse_t *pulses);
/*D
This function adds a number of pulses to the current waveform.
. .
numPulses: the number of pulses
pulses: an array of pulses
. .
Returns the new total number of pulses in the current waveform if OK,
otherwise PI_TOO_MANY_PULSES.
The pulses are interleaved in time order within the existing waveform
(if any).
Merging allows the waveform to be built in parts, that is the settings
for gpio#1 can be added, and then gpio#2 etc.
If the added waveform is intended to start after or within the existing
waveform then the first pulse should consist of a delay.
...
// Construct and send a 30 microsecond square wave.
gpioSetMode(gpio, PI_OUTPUT);
pulse[0].gpioOn = (1<= 0)
{
gpioWaveTxSend(wave_id, PI_WAVE_MODE_REPEAT);
// Transmit for 30 seconds.
sleep(30);
gpioWaveTxStop();
}
else
{
// Wave create failed.
}
...
D*/
/*F*/
int gpioWaveAddSerial
(unsigned user_gpio,
unsigned bbBaud,
unsigned offset,
unsigned numChar,
char *str);
/*D
This function adds a waveform representing serial data to the
existing waveform (if any). The serial data starts offset microseconds
from the start of the waveform.
. .
user_gpio: 0-31
bbBaud: 100-250000
offset: 0-
numChar: 1-
str: an array of chars (which may contain nulls)
. .
Returns the new total number of pulses in the current waveform if OK,
otherwise PI_BAD_USER_GPIO, PI_BAD_WAVE_BAUD, PI_TOO_MANY_CHARS,
PI_BAD_SER_OFFSET, or PI_TOO_MANY_PULSES.
The serial data is formatted as one start bit, eight data bits, and one
stop bit.
It is legal to add serial data streams with different baud rates to
the same waveform.
...
#define MSG_LEN 8
int i;
char *str;
char data[MSG_LEN];
str = "Hello world!";
gpioWaveAddSerial(4, 9600, 0, strlen(str), str);
for (i=0; i=0, as returned by [*gpioWaveCreate*]
. .
Wave ids are allocated in order, 0, 1, 2, etc.
Returns 0 if OK, otherwise PI_BAD_WAVE_ID.
D*/
/*F*/
int gpioWaveTxStart(unsigned wave_mode); /* DEPRECATED */
/*D
This function creates and then transmits a waveform. The mode
determines whether the waveform is sent once or cycles endlessly.
. .
wave_mode: 0 (PI_WAVE_MODE_ONE_SHOT), 1 (PI_WAVE_MODE_REPEAT)
. .
This function is deprecated and should no longer be used. Use
[*gpioWaveCreate*] and [*gpioWaveTxSend*] instead.
Returns the number of DMA control blocks in the waveform if OK,
otherwise PI_BAD_WAVE_MODE.
D*/
/*F*/
int gpioWaveTxSend(unsigned wave_id, unsigned wave_mode);
/*D
This function transmits the waveform with id wave_id. The mode
determines whether the waveform is sent once or cycles endlessly.
. .
wave_id: >=0, as returned by [*gpioWaveCreate*]
wave_mode: 0 (PI_WAVE_MODE_ONE_SHOT), 1 (PI_WAVE_MODE_REPEAT)
. .
Returns the number of DMA control blocks in the waveform if OK,
otherwise PI_BAD_WAVE_ID, or PI_BAD_WAVE_MODE.
D*/
/*F*/
int gpioWaveTxBusy(void);
/*D
This function checks to see if a waveform is currently being
transmitted.
Returns 1 if a waveform is currently being transmitted, otherwise 0.
D*/
/*F*/
int gpioWaveTxStop(void);
/*D
This function aborts the transmission of the current waveform.
Returns 0 if OK.
This function is intended to stop a waveform started in repeat mode.
D*/
/*F*/
int gpioWaveGetMicros(void);
/*D
This function returns the length in microseconds of the current
waveform.
D*/
/*F*/
int gpioWaveGetHighMicros(void);
/*D
This function returns the length in microseconds of the longest waveform
created since [*gpioInitialise*] was called.
D*/
/*F*/
int gpioWaveGetMaxMicros(void);
/*D
This function returns the maximum possible size of a waveform in
microseconds.
D*/
/*F*/
int gpioWaveGetPulses(void);
/*D
This function returns the length in pulses of the current waveform.
D*/
/*F*/
int gpioWaveGetHighPulses(void);
/*D
This function returns the length in pulses of the longest waveform
created since [*gpioInitialise*] was called.
D*/
/*F*/
int gpioWaveGetMaxPulses(void);
/*D
This function returns the maximum possible size of a waveform in pulses.
D*/
/*F*/
int gpioWaveGetCbs(void);
/*D
This function returns the length in DMA control blocks of the current
waveform.
D*/
/*F*/
int gpioWaveGetHighCbs(void);
/*D
This function returns the length in DMA control blocks of the longest
waveform created since [*gpioInitialise*] was called.
D*/
/*F*/
int gpioWaveGetMaxCbs(void);
/*D
This function returns the maximum possible size of a waveform in DMA
control blocks.
D*/
/*F*/
int gpioSerialReadOpen(unsigned user_gpio, unsigned bbBaud);
/*D
This function opens a gpio for bit bang reading of serial data.
. .
user_gpio: 0-31
bbBaud: 100-250000
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_WAVE_BAUD,
or PI_GPIO_IN_USE.
The serial data is returned in a cyclic buffer and is read using
[*gpioSerialRead*].
It is the caller's responsibility to read data from the cyclic buffer
in a timely fashion.
D*/
/*F*/
int gpioSerialRead(unsigned user_gpio, void *buf, size_t bufSize);
/*D
This function copies up to bufSize bytes of data read from the
bit bang serial cyclic buffer to the buffer starting at buf.
. .
user_gpio: 0-31, previously opened with [*gpioSerialReadOpen*]
buf: an array to receive the read bytes
bufSize: 0-
. .
Returns the number of bytes copied if OK, otherwise PI_BAD_USER_GPIO
or PI_NOT_SERIAL_GPIO.
D*/
/*F*/
int gpioSerialReadClose(unsigned user_gpio);
/*D
This function closes a gpio for bit bang reading of serial data.
. .
user_gpio: 0-31, previously opened with [*gpioSerialReadOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO, or PI_NOT_SERIAL_GPIO.
D*/
/*F*/
int i2cOpen(unsigned i2cBus, unsigned i2cAddr, unsigned i2cFlags);
/*D
This returns a handle for the device at the address on the I2C bus.
. .
i2cBus: 0-1
i2cAddr: 0x08-0x77
i2cFlags: 0
. .
No flags are currently defined. This parameter should be set to zero.
Returns a handle (>=0) if OK, otherwise PI_BAD_I2C_BUS, PI_BAD_I2C_ADDR,
PI_BAD_FLAGS, PI_NO_HANDLE, or PI_I2C_OPEN_FAILED.
D*/
/*F*/
int i2cClose(unsigned handle);
/*D
This closes the I2C device associated with the handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
D*/
/*F*/
int i2cReadDevice(unsigned handle, char *buf, unsigned count);
/*D
This reads count bytes from the raw device into buf.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
buf: an array to receive the read data bytes
count: >0, the number of bytes to read
. .
Returns count (>0) if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_READ_FAILED.
D*/
/*F*/
int i2cWriteDevice(unsigned handle, char *buf, unsigned count);
/*D
This writes count bytes from buf to the raw device.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
buf: an array containing the data bytes to write
count: >0, the number of bytes to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
D*/
/*F*/
int i2cWriteQuick(unsigned handle, unsigned bit);
/*D
This sends a single bit (in the Rd/Wr bit) to the device associated
with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
bit: 0-1, the value to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
Quick command. smbus 2.0 5.5.1
D*/
/*F*/
int i2cWriteByte(unsigned handle, unsigned bVal);
/*D
This sends a single byte to the device associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
bVal: 0-0xFF, the value to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
Send byte. smbus 2.0 5.5.2
D*/
/*F*/
int i2cReadByte(unsigned handle);
/*D
This reads a single byte from the device associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
. .
Returns the byte read (>=0) if OK, otherwise PI_BAD_HANDLE,
or PI_I2C_READ_FAILED.
Receive byte. smbus 2.0 5.5.3
D*/
/*F*/
int i2cWriteByteData(unsigned handle, unsigned i2cReg, unsigned bVal);
/*D
This writes a single byte to the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write
bVal: 0-0xFF, the value to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
Write byte. smbus 2.0 5.5.4
D*/
/*F*/
int i2cWriteWordData(unsigned handle, unsigned i2cReg, unsigned wVal);
/*D
This writes a single 16 bit word to the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write
wVal: 0-0xFFFF, the value to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
Write word. smbus 2.0 5.5.4
D*/
/*F*/
int i2cReadByteData(unsigned handle, unsigned i2cReg);
/*D
This reads a single byte from the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to read
. .
Returns the byte read (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
Read byte. smbus 2.0 5.5.5
D*/
/*F*/
int i2cReadWordData(unsigned handle, unsigned i2cReg);
/*D
This reads a single 16 bit word from the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to read
. .
Returns the word read (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
Read word. smbus 2.0 5.5.5
D*/
/*F*/
int i2cProcessCall(unsigned handle, unsigned i2cReg, unsigned wVal);
/*D
This writes 16 bits of data to the specified register of the device
associated with handle and and reads 16 bits of data in return.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write/read
wVal: 0-0xFFFF, the value to write
. .
Returns the word read (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
Process call. smbus 2.0 5.5.6
D*/
/*F*/
int i2cWriteBlockData(
unsigned handle, unsigned i2cReg, char *buf, unsigned count);
/*D
This writes up to 32 bytes to the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write
buf: an array with the data to send
count: 1-32, the number of bytes to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
Block write. smbus 2.0 5.5.7
D*/
/*F*/
int i2cReadBlockData(unsigned handle, unsigned i2cReg, char *buf);
/*D
This reads a block of up to 32 bytes from the specified register of
the device associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to read
buf: an array to receive the read data
. .
The amount of returned data is set by the device.
Returns the number of bytes read (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
Block read. smbus 2.0 5.5.7
D*/
/*F*/
int i2cBlockProcessCall(
unsigned handle, unsigned i2cReg, char *buf, unsigned count);
/*D
This writes data bytes to the specified register of the device
associated with handle and reads a device specified number
of bytes of data in return.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write/read
buf: an array with the data to send and to receive the read data
count: 1-32, the number of bytes to write
. .
Returns the number of bytes read (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
The smbus 2.0 documentation states that a minimum of 1 byte may be
sent and a minimum of 1 byte may be received. The total number of
bytes sent/received must be 32 or less.
Block write-block read. smbus 2.0 5.5.8
D*/
/*F*/
int i2cReadI2CBlockData(
unsigned handle, unsigned i2cReg, char *buf, unsigned count);
/*D
This reads count bytes from the specified register of the device
associated with handle . The count may be 1-32.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to read
buf: an array to receive the read data
count: 1-32, the number of bytes to read
. .
Returns the number of bytes read (>0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, or PI_I2C_READ_FAILED.
D*/
/*F*/
int i2cWriteI2CBlockData(
unsigned handle, unsigned i2cReg, char *buf, unsigned count);
/*D
This writes 1 to 32 bytes to the specified register of the device
associated with handle.
. .
handle: >=0, as returned by a call to [*i2cOpen*]
i2cReg: 0-255, the register to write
buf: the data to write
count: 1-32, the number of bytes to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_I2C_WRITE_FAILED.
D*/
/*F*/
int spiOpen(unsigned spiChan, unsigned spiBaud, unsigned spiFlags);
/*D
This function returns a handle for the SPI device on the channel.
Data will be transferred at baud bits per second. The flags may
be used to modify the default behaviour of 4-wire operation, mode 0,
active low chip select.
An auxiliary SPI device is available on the B+ and may be
selected by setting the A bit in the flags. The auxiliary
device has 3 chip selects and a selectable word size in bits.
. .
spiChan: 0-1
spiBaud: >1
spiFlags: see below
. .
Returns a handle (>=0) if OK, otherwise PI_BAD_SPI_CHANNEL,
PI_BAD_SPI_SPEED, PI_BAD_FLAGS, PI_NO_AUX_SPI, or PI_SPI_OPEN_FAILED.
spiFlags consists of the least significant 22 bits.
. .
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
b b b b b b R T n n n n W A u2 u1 u0 p2 p1 p0 m m
. .
mm defines the SPI mode.
. .
Mode POL PHA
0 0 0
1 0 1
2 1 0
3 1 1
. .
px is 0 if CEx is active low (default) and 1 for active high.
ux is 0 if the CEx gpio is reserved for SPI (default) and 1 otherwise.
A is 0 for the standard SPI device, 1 for the auxiliary SPI. The
auxiliary device is only present on the B+.
W is 0 if the device is not 3-wire, 1 if the device is 3-wire. Standard
SPI device only.
nnnn defines the number of bytes (0-15) to write before switching
the MOSI line to MISO to read data. This field is ignored
if W is not set. Standard SPI device only.
T is 1 if the least significant bit is transmitted on MOSI first, the
default (0) shifts the most significant bit out first. Auxiliary SPI
device only.
R is 1 if the least significant bit is received on MISO first, the
default (0) receives the most significant bit first. Auxiliary SPI
device only.
bbbbbb defines the word size in bits (0-32). The default (0)
sets 8 bits per word. Auxiliary SPI device only.
The other bits in flags should be set to zero.
D*/
/*F*/
int spiClose(unsigned handle);
/*D
This functions closes the SPI device identified by the handle.
. .
handle: >=0, as returned by a call to [*spiOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
D*/
/*F*/
int spiRead(unsigned handle, char *buf, unsigned count);
/*D
This function reads count bytes of data from the SPI
device associated with the handle.
. .
handle: >=0, as returned by a call to [*spiOpen*]
buf: an array to receive the read data bytes
count: the number of bytes to read
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_SPI_COUNT, or
PI_SPI_XFER_FAILED.
D*/
/*F*/
int spiWrite(unsigned handle, char *buf, unsigned count);
/*D
This function writes count bytes of data from buf to the SPI
device associated with the handle.
. .
handle: >=0, as returned by a call to [*spiOpen*]
buf: the data bytes to write
count: the number of bytes to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_SPI_COUNT, or
PI_SPI_XFER_FAILED.
D*/
/*F*/
int spiXfer(unsigned handle, char *txBuf, char *rxBuf, unsigned count);
/*D
This function transfers count bytes of data from txBuf to the SPI
device associated with the handle. Simultaneously count bytes of
data are read from the device and placed in rxBuf.
. .
handle: >=0, as returned by a call to [*spiOpen*]
txBuf: the data bytes to write
rxBuf: the received data bytes
count: the number of bytes to transfer
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_SPI_COUNT, or
PI_SPI_XFER_FAILED.
D*/
/*F*/
int serOpen(char *sertty, unsigned serBaud, unsigned serFlags);
/*D
This function opens a serial device at a specified baud rate
with specified flags.
. .
sertty: the serial device to open, /dev/tty*
serBaud: the baud rate to use
serFlags: 0
. .
Returns a handle (>=0) if OK, otherwise PI_NO_HANDLE, or
PI_SER_OPEN_FAILED.
No flags are currently defined. This parameter should be set to zero.
D*/
/*F*/
int serClose(unsigned handle);
/*D
This function closes the serial device associated with handle.
. .
handle: >=0, as returned by a call to [*serOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE.
D*/
/*F*/
int serWriteByte(unsigned handle, unsigned bVal);
/*D
This function writes bVal to the serial port associated with handle.
. .
handle: >=0, as returned by a call to [*serOpen*]
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_SER_WRITE_FAILED.
D*/
/*F*/
int serReadByte(unsigned handle);
/*D
This function reads a byte from the serial port associated with handle.
. .
handle: >=0, as returned by a call to [*serOpen*]
. .
Returns the read byte (>=0) if OK, otherwise PI_BAD_HANDLE,
PI_SER_READ_NO_DATA, or PI_SER_READ_FAILED.
D*/
/*F*/
int serWrite(unsigned handle, char *buf, unsigned count);
/*D
This function writes count bytes from buf to the the serial port
associated with handle.
. .
handle: >=0, as returned by a call to [*serOpen*]
buf: the array of bytes to write
count: the number of bytes to write
. .
Returns 0 if OK, otherwise PI_BAD_HANDLE, PI_BAD_PARAM, or
PI_SER_WRITE_FAILED.
D*/
/*F*/
int serRead(unsigned handle, char *buf, unsigned count);
/*D
This function reads up count bytes from the the serial port
associated with handle and writes them to buf.
. .
handle: >=0, as returned by a call to serial_open
buf: an array to receive the read data
count: the maximum number of bytes to read
. .
Returns the number of bytes read (>0) if OK, otherwise PI_BAD_HANDLE,
PI_BAD_PARAM, PI_SER_READ_NO_DATA, or PI_SER_WRITE_FAILED.
D*/
/*F*/
int serDataAvailable(unsigned handle);
/*D
This function returns the number of bytes available
to be read from the device associated with handle.
. .
handle: >=0, as returned by a call to [*serOpen*]
. .
Returns the number of bytes of data available (>=0) if OK,
otherwise PI_BAD_HANDLE.
D*/
/*F*/
int gpioTrigger(unsigned user_gpio, unsigned pulseLen, unsigned level);
/*D
This function sends a trigger pulse to a gpio. The gpio is set to
level for pulseLen microseconds and then reset to not level.
. .
user_gpio: 0-31
pulseLen: 1-100
level: 0,1
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO, PI_BAD_LEVEL,
or PI_BAD_PULSELEN.
D*/
/*F*/
int gpioSetWatchdog(unsigned user_gpio, unsigned timeout);
/*D
Sets a watchdog for a gpio.
. .
user_gpio: 0-31
timeout: 0-60000
. .
Returns 0 if OK, otherwise PI_BAD_USER_GPIO or PI_BAD_WDOG_TIMEOUT.
The watchdog is nominally in milliseconds.
One watchdog may be registered per gpio.
The watchdog may be cancelled by setting timeout to 0.
If no level change has been detected for the gpio for timeout
milliseconds:-
1) any registered alert function for the gpio is called with
the level set to PI_TIMEOUT.
2) any notification for the gpio has a report written to the
fifo with the flags set to indicate a watchdog timeout.
...
void aFunction(int gpio, int level, uint32_t tick)
{
printf("gpio %d became %d at %d\n", gpio, level, tick);
}
// call aFunction whenever gpio 4 changes state
gpioSetAlertFunc(4, aFunction);
// or approximately every 5 millis
gpioSetWatchdog(4, 5);
...
D*/
/*F*/
int gpioSetGetSamplesFunc(gpioGetSamplesFunc_t f, uint32_t bits);
/*D
Registers a function to be called (a callback) every millisecond
with the latest gpio samples.
. .
f: the function to call
bits: the gpios of interest
. .
Returns 0 if OK.
The function is passed a pointer to the samples and the number
of samples.
Only one function can be registered.
The callback may be cancelled by passing NULL as the function.
The samples returned will be the union of bits, plus any active alerts,
plus any active notifications.
e.g. if there are alerts for gpios 7, 8, and 9, notifications for gpios
8, 10, 23, 24, and bits is (1<<23)|(1<<17) then samples for gpios
7, 8, 9, 10, 17, 23, and 24 will be reported.
D*/
/*F*/
int gpioSetGetSamplesFuncEx(
gpioGetSamplesFuncEx_t f, uint32_t bits, void *userdata);
/*D
Registers a function to be called (a callback) every millisecond
with the latest gpio samples.
. .
f: the function to call
bits: the gpios of interest
userdata: a pointer to arbitrary user data
. .
Returns 0 if OK.
The function is passed a pointer to the samples, the number
of samples, and the userdata pointer.
Only one of [*gpioGetSamplesFunc*] or [*gpioGetSamplesFuncEx*] can be
registered.
See [*gpioSetGetSamplesFunc*] for further details.
D*/
/*F*/
int gpioSetTimerFunc(unsigned timer, unsigned millis, gpioTimerFunc_t f);
/*D
Registers a function to be called (a callback) every millis milliseconds.
. .
timer: 0-9
millis: 10-60000
f: the function to call
. .
Returns 0 if OK, otherwise PI_BAD_TIMER, PI_BAD_MS, or PI_TIMER_FAILED.
10 timers are supported numbered 0 to 9.
One function may be registered per timer.
The timer may be cancelled by passing NULL as the function.
...
void bFunction(void)
{
printf("two seconds have elapsed\n");
}
// call bFunction every 2000 milliseconds
gpioSetTimerFunc(0, 2000, bFunction);
...
D*/
/*F*/
int gpioSetTimerFuncEx(
unsigned timer, unsigned millis, gpioTimerFuncEx_t f, void *userdata);
/*D
Registers a function to be called (a callback) every millis milliseconds.
. .
timer: 0-9.
millis: 10-60000
f: the function to call
userdata: a pointer to arbitrary user data
. .
Returns 0 if OK, otherwise PI_BAD_TIMER, PI_BAD_MS, or PI_TIMER_FAILED.
The function is passed the userdata pointer.
Only one of [*gpioSetTimerFunc*] or [*gpioSetTimerFuncEx*] can be
registered per timer.
See [*gpioSetTimerFunc*] for further details.
D*/
/*F*/
pthread_t *gpioStartThread(gpioThreadFunc_t f, void *arg);
/*D
Starts a new thread of execution with f as the main routine.
. .
f: the main function for the new thread
arg: a pointer to arbitrary user data
. .
Returns a pointer to pthread_t if OK, otherwise NULL.
The function is passed the single argument arg.
The thread can be cancelled by passing the pointer to pthread_t to
[*gpioStopThread*].
...
#include
#include
void *myfunc(void *arg)
{
while (1)
{
printf("%s\n", arg);
sleep(1);
}
}
int main(int argc, char *argv[])
{
pthread_t *p1, *p2, *p3;
if (gpioInitialise() < 0) return 1;
p1 = gpioStartThread(myfunc, "thread 1"); sleep(3);
p2 = gpioStartThread(myfunc, "thread 2"); sleep(3);
p3 = gpioStartThread(myfunc, "thread 3"); sleep(3);
gpioStopThread(p3); sleep(3);
gpioStopThread(p2); sleep(3);
gpioStopThread(p1); sleep(3);
gpioTerminate();
}
...
D*/
/*F*/
void gpioStopThread(pthread_t *pth);
/*D
Cancels the thread pointed at by pth.
. .
pth: a thread pointer returned by [*gpioStartThread*]
. .
No value is returned.
The thread to be stopped should have been started with [*gpioStartThread*].
D*/
/*F*/
int gpioStoreScript(char *script);
/*D
This function stores a null terminated script for later execution.
. .
script: the text of the script
. .
The function returns a script id if the script is valid,
otherwise PI_BAD_SCRIPT.
D*/
/*F*/
int gpioRunScript(unsigned script_id, unsigned numPar, uint32_t *param);
/*D
This function runs a stored script.
. .
script_id: >=0, as returned by [*gpioStoreScript*]
numPar: 0-10, the number of parameters
param: an array of parameters
. .
The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID, or
PI_TOO_MANY_PARAM.
param is an array of up to 10 parameters which may be referenced in
the script as p0 to p9.
D*/
/*F*/
int gpioScriptStatus(unsigned script_id, uint32_t *param);
/*D
This function returns the run status of a stored script as well as
the current values of parameters 0 to 9.
. .
script_id: >=0, as returned by [*gpioStoreScript*]
param: an array to hold the returned 10 parameters
. .
The function returns greater than or equal to 0 if OK,
otherwise PI_BAD_SCRIPT_ID.
The run status may be
. .
PI_SCRIPT_INITING
PI_SCRIPT_HALTED
PI_SCRIPT_RUNNING
PI_SCRIPT_WAITING
PI_SCRIPT_FAILED
. .
The current value of script parameters 0 to 9 are returned in param.
D*/
/*F*/
int gpioStopScript(unsigned script_id);
/*D
This function stops a running script.
. .
script_id: >=0, as returned by [*gpioStoreScript*]
. .
The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID.
D*/
/*F*/
int gpioDeleteScript(unsigned script_id);
/*D
This function deletes a stored script.
. .
script_id: >=0, as returned by [*gpioStoreScript*]
. .
The function returns 0 if OK, otherwise PI_BAD_SCRIPT_ID.
D*/
/*F*/
int gpioSetSignalFunc(unsigned signum, gpioSignalFunc_t f);
/*D
Registers a function to be called (a callback) when a signal occurs.
. .
signum: 0-63
f: the callback function
. .
Returns 0 if OK, otherwise PI_BAD_SIGNUM.
The function is passed the signal number.
One function may be registered per signal.
The callback may be cancelled by passing NULL.
By default all signals are treated as fatal and cause the library
to call gpioTerminate and then exit.
D*/
/*F*/
int gpioSetSignalFuncEx(
unsigned signum, gpioSignalFuncEx_t f, void *userdata);
/*D
Registers a function to be called (a callback) when a signal occurs.
. .
signum: 0-63
f: the callback function
userdata: a pointer to arbitrary user data
. .
Returns 0 if OK, otherwise PI_BAD_SIGNUM.
The function is passed the signal number and the userdata pointer.
Only one of gpioSetSignalFunc or gpioSetSignalFuncEx can be
registered per signal.
See gpioSetSignalFunc for further details.
D*/
/*F*/
uint32_t gpioRead_Bits_0_31(void);
/*D
Returns the current level of gpios 0-31.
D*/
/*F*/
uint32_t gpioRead_Bits_32_53(void);
/*D
Returns the current level of gpios 32-53.
D*/
/*F*/
int gpioWrite_Bits_0_31_Clear(uint32_t bits);
/*D
Clears gpios 0-31 if the corresponding bit in bits is set.
. .
bits: a bit mask of gpios to clear
. .
Returns 0 if OK.
...
// To clear (set to 0) gpios 4, 7, and 15
gpioWrite_Bits_0_31_Clear( (1<<4) | (1<<7) | (1<<15) );
...
D*/
/*F*/
int gpioWrite_Bits_32_53_Clear(uint32_t bits);
/*D
Clears gpios 32-53 if the corresponding bit (0-21) in bits is set.
. .
bits: a bit mask of gpios to clear
. .
Returns 0 if OK.
D*/
/*F*/
int gpioWrite_Bits_0_31_Set(uint32_t bits);
/*D
Sets gpios 0-31 if the corresponding bit in bits is set.
. .
bits: a bit mask of gpios to set
. .
Returns 0 if OK.
D*/
/*F*/
int gpioWrite_Bits_32_53_Set(uint32_t bits);
/*D
Sets gpios 32-53 if the corresponding bit (0-21) in bits is set.
. .
bits: a bit mask of gpios to set
. .
Returns 0 if OK.
...
// To set (set to 1) gpios 32, 40, and 53
gpioWrite_Bits_32_53_Set((1<<(32-32)) | (1<<(40-32)) | (1<<(53-32)));
...
D*/
/*F*/
int gpioTime(unsigned timetype, int *seconds, int *micros);
/*D
Updates the seconds and micros variables with the current time.
. .
timetype: 0 (relative), 1 (absolute)
seconds: a pointer to an int to hold seconds
micros: a pointer to an int to hold microseconds
. .
Returns 0 if OK, otherwise PI_BAD_TIMETYPE.
If timetype is PI_TIME_ABSOLUTE updates seconds and micros with the
number of seconds and microseconds since the epoch (1st January 1970).
If timetype is PI_TIME_RELATIVE updates seconds and micros with the
number of seconds and microseconds since the library was initialised.
...
int secs, mics;
// print the number of seconds since the library was started
gpioTime(PI_TIME_RELATIVE, &secs, &mics);
printf("library started %d.%03d seconds ago\n", secs, mics/1000);
...
D*/
/*F*/
int gpioSleep(unsigned timetype, int seconds, int micros);
/*D
Sleeps for the number of seconds and microseconds specified by seconds
and micros.
. .
timetype: 0 (relative), 1 (absolute)
seconds: seconds to sleep
micros: microseconds to sleep
. .
Returns 0 if OK, otherwise PI_BAD_TIMETYPE, PI_BAD_SECONDS,
or PI_BAD_MICROS.
If timetype is PI_TIME_ABSOLUTE the sleep ends when the number of seconds
and microseconds since the epoch (1st January 1970) has elapsed. System
clock changes are taken into account.
If timetype is PI_TIME_RELATIVE the sleep is for the specified number
of seconds and microseconds. System clock changes do not effect the
sleep length.
For short delays (say, 50 microseonds or less) use [*gpioDelay*].
...
gpioSleep(PI_TIME_RELATIVE, 2, 500000); // sleep for 2.5 seconds
gpioSleep(PI_TIME_RELATIVE, 0, 100000); // sleep for 0.1 seconds
gpioSleep(PI_TIME_RELATIVE, 60, 0); // sleep for one minute
...
D*/
/*F*/
uint32_t gpioDelay(uint32_t micros);
/*D
Delays for at least the number of microseconds specified by micros.
. .
micros: the number of microseconds to sleep
. .
Returns the actual length of the delay in microseconds.
Delays of 100 microseconds or less use busy waits.
D*/
/*F*/
uint32_t gpioTick(void);
/*D
Returns the current system tick.
Tick is the number of microseconds since system boot.
As tick is an unsigned 32 bit quantity it wraps around after
2^32 microseconds, which is approximately 1 hour 12 minutes.
You don't need to worry about the wrap around as long as you
take a tick (uint32_t) from another tick, i.e. the following
code will always provide the correct difference.
...
uint32_t startTick, endTick;
int diffTick;
startTick = gpioTick();
// do some processing
endTick = gpioTick();
diffTick = endTick - startTick;
printf("some processing took %d microseconds\n", diffTick);
...
D*/
/*F*/
unsigned gpioHardwareRevision(void);
/*D
Returns the hardware revision.
If the hardware revision can not be found or is not a valid hexadecimal
number the function returns 0.
The hardware revision is the last 4 characters on the Revision line of
/proc/cpuinfo.
The revision number can be used to determine the assignment of gpios
to pins.
There are at least three types of board.
Type 1 has gpio 0 on P1-3, gpio 1 on P1-5, and gpio 21 on P1-13.
Type 2 has gpio 2 on P1-3, gpio 3 on P1-5, gpio 27 on P1-13, and
gpios 28-31 on P5.
Type 3 has a 40 pin connector rather than the 26 pin connector of
the earlier boards. Gpios 0 to 27 are brought out to the connector.
Type 1 boards have hardware revision numbers of 2 and 3.
Type 2 boards have hardware revision numbers of 4, 5, 6, and 15.
Type 3 boards have hardware revision number 16.
for "Revision : 0002" the function returns 2.
for "Revision : 000f" the function returns 15.
for "Revision : 000g" the function returns 0.
D*/
/*F*/
unsigned gpioVersion(void);
/*D
Returns the pigpio version.
D*/
/*F*/
int gpioCfgBufferSize(unsigned cfgMillis);
/*D
Configures pigpio to buffer cfgMillis milliseconds of gpio samples.
. .
cfgMillis: 100-10000
. .
The default setting is 120 milliseconds.
The intention is to allow for bursts of data and protection against
other processes hogging cpu time.
I haven't seen a process locked out for more than 100 milliseconds.
Making the buffer bigger uses a LOT of memory at the more frequent
sampling rates as shown in the following table in MBs.
. .
buffer milliseconds
120 250 500 1sec 2sec 4sec 8sec
1 16 31 55 107 --- --- ---
2 10 18 31 55 107 --- ---
sample 4 8 12 18 31 55 107 ---
rate 5 8 10 14 24 45 87 ---
(us) 8 6 8 12 18 31 55 107
10 6 8 10 14 24 45 87
. .
D*/
/*F*/
int gpioCfgClock(
unsigned cfgMicros, unsigned cfgPeripheral, unsigned cfgSource);
/*D
Configures pigpio to use a particualar sample rate timed by a specified
peripheral and clock source.
. .
cfgMicros: 1, 2, 4, 5, 8, 10
cfgPeripheral: 0 (PWM), 1 (PCM)
cfgSource: 0 (OSC), 1 (PLLD)
. .
The timings are provided by the specified peripheral (PWM or PCM)
using the frequency source (OSC or PLLD).
The default setting is 5 microseconds using the PCM peripheral
with the PLLD source.
The approximate CPU percentage used for each sample rate is:
. .
sample cpu
rate %
1 25
2 16
4 11
5 10
8 15
10 14
. .
A sample rate of 5 microseconds seeems to be the sweet spot.
D*/
/*F*/
int gpioCfgDMAchannel(unsigned DMAchannel); /* DEPRECATED */
/*D
Configures pigpio to use the specified DMA channel.
. .
DMAchannel: 0-14
. .
The default setting is to use channel 14.
D*/
/*F*/
int gpioCfgDMAchannels(
unsigned primaryChannel, unsigned secondaryChannel);
/*D
Configures pigpio to use the specified DMA channels.
. .
primaryChannel: 0-14
secondaryChannel: 0-6
. .
The default setting is to use channel 14 for the primary channel and
channel 5 for the secondary channel.
D*/
/*F*/
int gpioCfgPermissions(uint64_t updateMask);
/*D
Configures pigpio to only allow updates (writes or mode changes) for the
gpios specified by the mask.
. .
updateMask: bit (1<=0, a script_id returned by [*gpioStoreScript*]
. .
Not intended for general use.
D*/
#ifdef __cplusplus
}
#endif
/*PARAMS
*arg::
A pointer to a void object passed to a thread started by gpioStartThread.
bbBaud::
The baud rate used for the transmission and reception of bit banged
serial data.
. .
PI_WAVE_MIN_BAUD 100
PI_WAVE_MAX_BAUD 250000
. .
bit::
A value of 0 or 1.
bitPos::
A bit position within a byte or word. The least significant bit is
position 0.
bits::
A value used to select gpios. If bit n of bits is set then gpio n is
selected.
A convenient way to set bit n is to or in (1<= 0.
updateMask::
A 64 bit mask indicating which gpios may be written to by the user.
If gpio#n may be written then bit (1< 3
#define PI_BAD_CHANNEL -27 // DMA channel not 0-14
#define PI_BAD_PRIM_CHANNEL -27 // DMA primary channel not 0-14
#define PI_BAD_SOCKET_PORT -28 // socket port not 1024-32000
#define PI_BAD_FIFO_COMMAND -29 // unrecognized fifo command
#define PI_BAD_SECO_CHANNEL -30 // DMA secondary channel not 0-6
#define PI_NOT_INITIALISED -31 // function called before gpioInitialise
#define PI_INITIALISED -32 // function called after gpioInitialise
#define PI_BAD_WAVE_MODE -33 // waveform mode not 0-1
#define PI_BAD_CFG_INTERNAL -34 // bad parameter in gpioCfgInternals call
#define PI_BAD_WAVE_BAUD -35 // baud rate not 100-250000
#define PI_TOO_MANY_PULSES -36 // waveform has too many pulses
#define PI_TOO_MANY_CHARS -37 // waveform has too many chars
#define PI_NOT_SERIAL_GPIO -38 // no serial read in progress on gpio
#define PI_BAD_SERIAL_STRUC -39 // bad (null) serial structure parameter
#define PI_BAD_SERIAL_BUF -40 // bad (null) serial buf parameter
#define PI_NOT_PERMITTED -41 // gpio operation not permitted
#define PI_SOME_PERMITTED -42 // one or more gpios not permitted
#define PI_BAD_WVSC_COMMND -43 // bad WVSC subcommand
#define PI_BAD_WVSM_COMMND -44 // bad WVSM subcommand
#define PI_BAD_WVSP_COMMND -45 // bad WVSP subcommand
#define PI_BAD_PULSELEN -46 // trigger pulse length > 100
#define PI_BAD_SCRIPT -47 // invalid script
#define PI_BAD_SCRIPT_ID -48 // unknown script id
#define PI_BAD_SER_OFFSET -49 // add serial data offset > 30 minutes
#define PI_GPIO_IN_USE -50 // gpio already in use
#define PI_BAD_SERIAL_COUNT -51 // must read at least a byte at a time
#define PI_BAD_PARAM_NUM -52 // script parameter must be 0-9
#define PI_DUP_TAG -53 // script has duplicate tag
#define PI_TOO_MANY_TAGS -54 // script has too many tags
#define PI_BAD_SCRIPT_CMD -55 // illegal script command
#define PI_BAD_VAR_NUM -56 // script variable must be 0-149
#define PI_NO_SCRIPT_ROOM -57 // no more room for scripts
#define PI_NO_MEMORY -58 // can't allocate temporary memory
#define PI_SOCK_READ_FAILED -59 // socket read failed
#define PI_SOCK_WRIT_FAILED -60 // socket write failed
#define PI_TOO_MANY_PARAM -61 // too many script parameters > 10
#define PI_NOT_HALTED -62 // script already running or failed
#define PI_BAD_TAG -63 // script has unresolved tag
#define PI_BAD_MICS_DELAY -64 // bad MICS delay (too large)
#define PI_BAD_MILS_DELAY -65 // bad MILS delay (too large)
#define PI_BAD_WAVE_ID -66 // non existent wave id
#define PI_TOO_MANY_CBS -67 // No more CBs for waveform
#define PI_TOO_MANY_OOL -68 // No more OOL for waveform
#define PI_EMPTY_WAVEFORM -69 // attempt to create an empty waveform
#define PI_NO_WAVEFORM_ID -70 // no more waveforms
#define PI_I2C_OPEN_FAILED -71 // can't open I2C device
#define PI_SER_OPEN_FAILED -72 // can't open serial device
#define PI_SPI_OPEN_FAILED -73 // can't open SPI device
#define PI_BAD_I2C_BUS -74 // bad I2C bus
#define PI_BAD_I2C_ADDR -75 // bad I2C address
#define PI_BAD_SPI_CHANNEL -76 // bad SPI channel
#define PI_BAD_FLAGS -77 // bad i2c/spi/ser open flags
#define PI_BAD_SPI_SPEED -78 // bad SPI speed
#define PI_BAD_SER_DEVICE -79 // bad serial device name
#define PI_BAD_SER_SPEED -80 // bad serial baud rate
#define PI_BAD_PARAM -81 // bad i2c/spi/ser parameter
#define PI_I2C_WRITE_FAILED -82 // i2c write failed
#define PI_I2C_READ_FAILED -83 // i2c read failed
#define PI_BAD_SPI_COUNT -84 // bad SPI count
#define PI_SER_WRITE_FAILED -85 // ser write failed
#define PI_SER_READ_FAILED -86 // ser read failed
#define PI_SER_READ_NO_DATA -87 // ser read no data available
#define PI_UNKNOWN_COMMAND -88 // unknown command
#define PI_SPI_XFER_FAILED -89 // spi xfer/read/write failed
#define PI_BAD_POINTER -90 // bad (NULL) pointer
#define PI_NO_AUX_SPI -91 // need a B+ for auxiliary SPI
/*DEF_E*/
/*DEF_S Defaults*/
#define PI_DEFAULT_BUFFER_MILLIS 120
#define PI_DEFAULT_CLK_MICROS 5
#define PI_DEFAULT_CLK_PERIPHERAL PI_CLOCK_PCM
#define PI_DEFAULT_CLK_SOURCE PI_CLOCK_PLLD
#define PI_DEFAULT_IF_FLAGS 0
#define PI_DEFAULT_DMA_CHANNEL 14
#define PI_DEFAULT_DMA_PRIMARY_CHANNEL 14
#define PI_DEFAULT_DMA_SECONDARY_CHANNEL 5
#define PI_DEFAULT_SOCKET_PORT 8888
#define PI_DEFAULT_SOCKET_PORT_STR "8888"
#define PI_DEFAULT_SOCKET_ADDR_STR "127.0.0.1"
#define PI_DEFAULT_UPDATE_MASK_R0 0xFFFFFFFF
#define PI_DEFAULT_UPDATE_MASK_R1 0x03E7CF93
#define PI_DEFAULT_UPDATE_MASK_R2 0xFBC7CF9C
#define PI_DEFAULT_UPDATE_MASK_R3 0x80400FFFFFFCLL
/*DEF_E*/
#endif