Fix misspelled variables (#484)

Co-authored-by: Florian Festi <florian@festi.info>

boxes/__init__.py

@@ -2708,7 +2708,7 @@ class Boxes:
             self.move(tw, th, move, label=label)
 
     @restore
-    def polygonWalls(self, borders, h, bottom="F", top="F", symetrical=True):
+    def polygonWalls(self, borders, h, bottom="F", top="F", symmetrical=True):
         bottom = self.edges.get(bottom, bottom)
         top = self.edges.get(top, top)
         t = self.thickness # XXX edge.margin()
@@ -2725,7 +2725,7 @@ class Boxes:
 
         self.moveTo(0, bottom.margin())
         while i < len(borders):
-            if symetrical:
+            if symmetrical:
                 if part_cnt % 2:
                     left, right = lf, rf
                 else:

boxes/generators/can_storage.py

@@ -110,7 +110,7 @@ for canned tomatoes:
             "--canDiameter",  action="store", type=float, default=75,
             help="outer diameter of the cans to be stored (in mm)")
         self.argparser.add_argument(
-            "--canHight",  action="store", type=float, default=110,
+            "--canHeight",  action="store", type=float, default=110,
             help="height of the cans to be stored (in mm)")
         self.argparser.add_argument(
             "--canNum",  action="store", type=int, default=12,
@@ -322,7 +322,7 @@ for canned tomatoes:
             self.bottom_chute_height = self.barrier_height + self.canDiameter * 0.1 + self.thickness - self.top_chute_depth
         
         self.height = self.thickness + self.canDiameter + self.bottom_chute_height + self.top_chute_height + 0.5 * self.thickness + self.canDiameter + 1.5 * self.thickness # measurements from bottom to top
-        self.width = 0.01 * self.canHight + self.canHight + 0.01 * self.canHight
+        self.width = 0.01 * self.canHeight + self.canHeight + 0.01 * self.canHeight
         edgs = self.bottom_edge + "h" + self.top_edge + "a"
         
         # render your parts here

boxes/generators/magazinefile.py

@@ -17,7 +17,7 @@
 from boxes import *
 from boxes.lids import _TopEdge
 
-class MagazinFile(Boxes):
+class MagazineFile(Boxes):
     """Open magazine file"""
 
     def __init__(self):

boxes/generators/paperbox.py

@@ -49,7 +49,7 @@ A paper creaser (or bone folder) is also useful.
         )
 
         self.argparser.add_argument(
-            "--lid_heigth",
+            "--lid_height",
             type=float,
             default=15,
             help="Height of the lid (part which goes inside the box)",
@@ -194,11 +194,11 @@ A paper creaser (or bone folder) is also useful.
 
     def lid(self, width):
         return [
-            self.lid_heigth - self.lid_radius,
+            self.lid_height - self.lid_radius,
             (90, self.lid_radius),
             width - 2 * self.lid_radius,
             (90, self.lid_radius),
-            self.lid_heigth - self.lid_radius,
+            self.lid_height - self.lid_radius,
         ]
 
     def mark(self, length):
@@ -254,7 +254,7 @@ A paper creaser (or bone folder) is also useful.
         ]
 
     def ear_description(self, length, lid_cut_length, reverse=False):
-        ear_depth = max(lid_cut_length, self.lid_heigth)
+        ear_depth = max(lid_cut_length, self.lid_height)
         radius = min(self.lid_radius, ear_depth - lid_cut_length)
         start_margin = self.thickness
         end_margin = 2 * self.burn

boxes/generators/trafficlight.py

@@ -20,7 +20,7 @@ from boxes import *
 class ShadyEdge(edges.BaseEdge):
     char = "s"
 
-    def __call__(self, lenght, **kw):
+    def __call__(self, length, **kw):
         s = self.shades
         h = self.h
         a = math.atan(s/h)

boxes/generators/wallcaliperholder.py

@@ -29,13 +29,13 @@ class WallCaliper(_WallMountedBox):
             "--width",  action="store", type=float, default=18.0,
             help="width of the long end")
         self.argparser.add_argument(
-            "--heigth",  action="store", type=float, default=6.0,
+            "--height",  action="store", type=float, default=6.0,
             help="height of the body")
 
     def side(self, move=None):
         t = self.thickness
         h = self.h
-        hc = self.heigth
+        hc = self.height
 
         tw = self.edges["b"].spacing() + hc + 8*t
 

boxes/walledges.py

@@ -19,7 +19,7 @@ class _WallMountedBox(Boxes):
         self.addSettingsArgs(FrenchCleatSettings)
         self.argparser.add_argument(
             "--walltype",  action="store", type=str, default="plain",
-            choices=["plain", "plain reenforced", "slatwall", "dinrail",
+            choices=["plain", "plain reinforced", "slatwall", "dinrail",
                      "french cleat"],
             help="Type of wall system to attach to")
 
@@ -43,7 +43,7 @@ class _WallMountedBox(Boxes):
 
         s.edgeObjects(self)
         self.wallHolesAt = self.edges["|"]
-        if self.walltype.endswith("reenforced"):
+        if self.walltype.endswith("reinforced"):
             self.edges["c"] = self.edges["d"]
             self.edges["C"] = self.edges["D"]
 

examples/generate.sh

@@ -12,7 +12,7 @@ $BOXES flexbox2 --x=70 --y=100 --h=50 --radius=20 --output=flexbox2.svg
 $BOXES flexbox3 --x=70 --y=100 --z=50 --h=8 --radius=30 --output=flexbox3.svg
 $BOXES folder --x=165 --y=240 --h=20 --r=10 --output=folder.svg
 #$BOXES lamp --x=50 --y=50  --r=10 --output=lamp.svg
-$BOXES magazinfile --output=magazinefile.svg
+$BOXES magazinefile --output=magazinefile.svg
 #$BOXES printer --output=printer.svg
 #$BOXES Silverwaree --output=silverwarebox.svg
 #$BOXES traylayout --x=4 --y=4 --output=traylayout.txt

po/boxes.py.pot

@@ -3947,15 +3947,15 @@ msgstr ""
 
 #. name of box generator
 #: boxes/generators/magazinefile.py
-msgid "MagazinFile"
+msgid "MagazineFile"
 msgstr ""
 
-#. description of MagazinFile
+#. description of MagazineFile
 #: boxes/generators/magazinefile.py
 msgid "Open magazine file"
 msgstr ""
 
-msgid "MagazinFile Settings"
+msgid "MagazineFile Settings"
 msgstr ""
 
 #. name of box generator
@@ -4602,10 +4602,10 @@ msgstr ""
 
 #. parameter name
 #: boxes/generators/paperbox.py
-msgid "lid_heigth"
+msgid "lid_height"
 msgstr ""
 
-#. help for parameter lid_heigth
+#. help for parameter lid_height
 #: boxes/generators/paperbox.py
 msgid "Height of the lid (part which goes inside the box)"
 msgstr ""

po/en.po

@@ -1634,16 +1634,16 @@ msgstr "LBeam Settings"
 
 #. name of box generator
 #: boxes/generators/magazinefile.py
-msgid "MagazinFile"
-msgstr "MagazinFile"
+msgid "MagazineFile"
+msgstr "MagazineFile"
 
-#. description of MagazinFile
+#. description of MagazineFile
 #: boxes/generators/magazinefile.py
 msgid "Open magazine file"
 msgstr "Open magazine file"
 
-msgid "MagazinFile Settings"
-msgstr "MagazinFile Settings"
+msgid "MagazineFile Settings"
+msgstr "MagazineFile Settings"
 
 #. name of box generator
 #: boxes/generators/makitapowersupply.py

po/fr.po

@@ -1627,15 +1627,15 @@ msgstr "Réglages du Dièdre en « L »"
 
 #. name of box generator
 #: boxes/generators/magazinefile.py
-msgid "MagazinFile"
+msgid "MagazineFile"
 msgstr "Porte-magazine"
 
-#. description of MagazinFile
+#. description of MagazineFile
 #: boxes/generators/magazinefile.py
 msgid "Open magazine file"
 msgstr "Support de magazines ouvert"
 
-msgid "MagazinFile Settings"
+msgid "MagazineFile Settings"
 msgstr "Réglages de Porte-magazine"
 
 #. name of box generator

po/zh_CN.po

@@ -615,10 +615,10 @@ msgstr "激光灯设置"
 msgid "MXL"
 msgstr "MXL"
 
-msgid "MagazinFile"
+msgid "MagazineFile"
 msgstr "杂志文件"
 
-msgid "MagazinFile Settings"
+msgid "MagazineFile Settings"
 msgstr "杂志文件设置"
 
 msgid "MakitaPowerSupply"

static/samples/samples.sha256

@@ -97,7 +97,7 @@ a95305025a8136290e95f8232463bb1c6023a1d98d502e7a249d52c60aafdd94  ../static/samp
 34058c3a37bc70dc72e467d2da1ece7cde2aacedf7b751243a7c264c9998afb2  ../static/samples/DiceBox.jpg
 e90b4a90c1dbd2a4a03e4cf50ba82bc7119b721bd5c90c5fdbd0a356c9eabfd3  ../static/samples/CanStorageAA.jpg
 0580043276c800c68dfba840d47c27f974ef2d0629751ecd250df2400f03cca8  ../static/samples/CanStorage.jpg
-bb250512410c007a74f91caee4e25eac817021f5a535987a7f5ff46148a074ca  ../static/samples/MagazinFile.jpg
+bb250512410c007a74f91caee4e25eac817021f5a535987a7f5ff46148a074ca  ../static/samples/MagazineFile.jpg
 59c29899a7f6cfa1727830b35ba621747bf1fe16b8559884054bf50235559a11  ../static/samples/CoinDisplay.jpg
 c21b47963a9de686eec4bcdb04dc84a64fef1e943d9c276f6ecb7d619af22791  ../static/samples/HalfBox_Shelf_usage.jpg
 3bdbb6dab2beea4dcdcf84941bf1f763bc9eb60ca9369965c4b003d5bb57f83b  ../static/samples/HalfBox_AngleJig_usage.jpg