diff --git a/locale/zh_CN/LC_MESSAGES/boxes.py.mo b/locale/zh_CN/LC_MESSAGES/boxes.py.mo
index 7147dc7..708c0af 100644
Binary files a/locale/zh_CN/LC_MESSAGES/boxes.py.mo and b/locale/zh_CN/LC_MESSAGES/boxes.py.mo differ
diff --git a/po/boxes.py.pot b/po/boxes.py.pot
index 85e793a..8a9b37c 100644
--- a/po/boxes.py.pot
+++ b/po/boxes.py.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-22 12:15+0200\n"
+"POT-Creation-Date: 2019-10-29 09:30+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -312,7 +312,9 @@ msgid "burn"
 msgstr ""
 
 #. help for parameter burn
-msgid "burn correction in mm (bigger values for tighter fit)"
+msgid ""
+"burn correction in mm (bigger values for tighter fit). Use BurnTest in "
+"\"Parts and Samples\" to find the right value."
 msgstr ""
 
 msgid "Settings for Finger Joints"
@@ -322,6 +324,22 @@ msgstr ""
 msgid "angle"
 msgstr ""
 
+#. parameter name for FingerJoint
+msgid "style"
+msgstr ""
+
+#. help for parameter style
+msgid "style of the fingers"
+msgstr ""
+
+#. possible choice for style
+msgid "rectangular"
+msgstr ""
+
+#. possible choice for style
+msgid "springs"
+msgstr ""
+
 #. parameter name for FingerJoint
 msgid "surroundingspaces"
 msgstr ""
@@ -351,7 +369,7 @@ msgid "play"
 msgstr ""
 
 #. help for parameter play
-msgid "extra space to allow movement"
+msgid "extra space to allow finger move in and out"
 msgstr ""
 
 #. parameter name for FingerJoint
@@ -420,10 +438,6 @@ msgstr ""
 msgid "set to lower value to get disks surrounding the pins"
 msgstr ""
 
-#. parameter name for Hinge
-msgid "style"
-msgstr ""
-
 #. help for parameter style
 msgid "\"outset\" or \"flush\""
 msgstr ""
@@ -618,6 +632,55 @@ msgstr ""
 msgid "inner width of the console"
 msgstr ""
 
+#. parameter name
+#: boxes/generators/arcade.py
+msgid "monitor_height"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/arcade.py
+msgid "keyboard_depth"
+msgstr ""
+
+#. name of box generator
+#: boxes/generators/bayonetbox.py
+msgid "BayonetBox"
+msgstr ""
+
+#. description of BayonetBox
+#: boxes/generators/bayonetbox.py
+msgid "Round box made from layers with twist on top"
+msgstr ""
+
+#. long description of BayonetBox in markdown
+#: boxes/generators/bayonetbox.py
+msgid ""
+"Glue together. All outside rings to the bottom, all inside rings to the top."
+msgstr ""
+
+msgid "BayonetBox Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/bayonetbox.py
+msgid "diameter"
+msgstr ""
+
+#. help for parameter diameter
+#: boxes/generators/bayonetbox.py
+msgid "Diameter of the box in mm"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/bayonetbox.py
+msgid "lugs"
+msgstr ""
+
+#. help for parameter lugs
+#: boxes/generators/bayonetbox.py
+msgid "number of locking lugs"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/bintray.py
 msgid "BinTray"
@@ -641,6 +704,83 @@ msgstr ""
 msgid "fraction of bin height covert with slope"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/bottlestack.py
+msgid "BottleStack"
+msgstr ""
+
+#. description of BottleStack
+#: boxes/generators/bottlestack.py
+msgid "Stack bottles in a fridge"
+msgstr ""
+
+msgid "BottleStack Settings"
+msgstr ""
+
+#. help for parameter diameter
+#: boxes/generators/bottlestack.py
+msgid "diameter of the bottles"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/bottlestack.py
+msgid "number"
+msgstr ""
+
+#. help for parameter number
+#: boxes/generators/bottlestack.py
+msgid "number of bottles to hold"
+msgstr ""
+
+#. help for parameter depth
+#: boxes/generators/bottlestack.py
+msgid "depth of the "
+msgstr ""
+
+#. name of box generator
+#: boxes/generators/burntest.py
+msgid "BurnTest"
+msgstr ""
+
+#. description of BurnTest
+#: boxes/generators/burntest.py
+msgid "Test different burn values"
+msgstr ""
+
+#. long description of BurnTest in markdown
+#: boxes/generators/burntest.py
+msgid ""
+"Set burn in the Default Settings to the lowest value\n"
+"to be tested. To get an idea cut a rectangle with known nominal size and\n"
+"measure the shrinkage due to the width of the laser cut. The burn value is\n"
+"half the difference of the overall size as shrinkage is occuring on both\n"
+"sides. You can use the reference rectangle as it is rendered without burn\n"
+"correction."
+msgstr ""
+
+msgid "BurnTest Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/burntest.py
+msgid "step"
+msgstr ""
+
+#. help for parameter step
+#: boxes/generators/burntest.py
+msgid "increases in burn value between the sides"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/burntest.py
+msgid "pairs"
+msgstr ""
+
+#. help for parameter pairs
+#: boxes/generators/burntest.py
+msgid "number of pairs (each testing four burn values)"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/cardbox.py
 msgid "CardBox"
@@ -723,11 +863,6 @@ msgstr ""
 msgid "ConcaveKnob Settings"
 msgstr ""
 
-#. parameter name
-#: boxes/generators/concaveknob.py
-msgid "diameter"
-msgstr ""
-
 #. help for parameter diameter
 #: boxes/generators/concaveknob.py
 msgid "Diameter of the knob (mm)"
@@ -937,6 +1072,121 @@ msgstr ""
 msgid "angle of floors"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/dividertray.py
+msgid "DividerTray"
+msgstr ""
+
+#. description of DividerTray
+#: boxes/generators/dividertray.py
+msgid "Divider tray - rows and dividers"
+msgstr ""
+
+msgid "DividerTray Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "slot_depth"
+msgstr ""
+
+#. help for parameter slot_depth
+#: boxes/generators/dividertray.py
+msgid "depth of the slot in mm"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "slot_angle"
+msgstr ""
+
+#. help for parameter slot_angle
+#: boxes/generators/dividertray.py
+msgid "angle at which slots are generated, in degrees. 0° is vertical."
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "slot_radius"
+msgstr ""
+
+#. help for parameter slot_radius
+#: boxes/generators/dividertray.py
+msgid "radius of the slot entrance in mm"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "slot_extra_slack"
+msgstr ""
+
+#. help for parameter slot_extra_slack
+#: boxes/generators/dividertray.py
+msgid ""
+"extra slack (in addition to thickness and kerf) for slot width to help "
+"insert dividers"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "divider_bottom_margin"
+msgstr ""
+
+#. help for parameter divider_bottom_margin
+#: boxes/generators/dividertray.py
+msgid "margin between box's bottom and divider's"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "divider_upper_notch_radius"
+msgstr ""
+
+#. help for parameter divider_upper_notch_radius
+#: boxes/generators/dividertray.py
+msgid "divider's notch's upper radius"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "divider_lower_notch_radius"
+msgstr ""
+
+#. help for parameter divider_lower_notch_radius
+#: boxes/generators/dividertray.py
+msgid "divider's notch's lower radius"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "divider_notch_depth"
+msgstr ""
+
+#. help for parameter divider_notch_depth
+#: boxes/generators/dividertray.py
+msgid "divider's notch's depth"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "left_wall"
+msgstr ""
+
+#. help for parameter left_wall
+#: boxes/generators/dividertray.py
+msgid "generate wall on the left side"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/dividertray.py
+msgid "right_wall"
+msgstr ""
+
+#. help for parameter right_wall
+#: boxes/generators/dividertray.py
+msgid "generate wall on the right side"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/drillbox.py
 msgid "DrillBox"
@@ -1025,6 +1275,14 @@ msgstr ""
 msgid "Distance of the screw holes from the wall in mm"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/fence.py
+msgid "Fence"
+msgstr ""
+
+msgid "Fence Settings"
+msgstr ""
+
 #. description of FlexBox
 #: boxes/generators/flexbox.py
 msgid "Box with living hinge and round corners"
@@ -1350,6 +1608,34 @@ msgstr ""
 msgid "number of stages in the gear reduction"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/gearbox2.py
+msgid "GearBox2"
+msgstr ""
+
+msgid "GearBox2 Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/gearbox2.py
+msgid "outputshaft"
+msgstr ""
+
+#. help for parameter outputshaft
+#: boxes/generators/gearbox2.py
+msgid "diameter of the output shaft"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/gearbox2.py
+msgid "bearingdiameter"
+msgstr ""
+
+#. help for parameter bearingdiameter
+#: boxes/generators/gearbox2.py
+msgid "diameter of the output bearings"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/heart.py
 msgid "HeartBox"
@@ -1605,6 +1891,39 @@ msgstr ""
 msgid "extra height to make operation smoother in mm"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/laserholdfast.py
+msgid "LaserHoldfast"
+msgstr ""
+
+#. description of LaserHoldfast
+#: boxes/generators/laserholdfast.py
+msgid "A holdfast for honey comb tables of laser cutters"
+msgstr ""
+
+msgid "LaserHoldfast Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/laserholdfast.py
+msgid "hookheight"
+msgstr ""
+
+#. help for parameter hookheight
+#: boxes/generators/laserholdfast.py
+msgid "height of the top hook"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/laserholdfast.py
+msgid "shaftwidth"
+msgstr ""
+
+#. help for parameter shaftwidth
+#: boxes/generators/laserholdfast.py
+msgid "width of the shaft"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/lbeam.py
 msgid "LBeam"
@@ -1656,6 +1975,24 @@ msgstr ""
 msgid "MakitaPowerSupply Settings"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/marblerun.py
+msgid "MarbleRun"
+msgstr ""
+
+#. description of MarbleRun
+#: boxes/generators/marblerun.py
+msgid "DESCRIPTION"
+msgstr ""
+
+msgid "MarbleRun Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/marblerun.py
+msgid "XX"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/nemamount.py
 msgid "NemaMount"
@@ -1694,27 +2031,12 @@ msgstr ""
 
 #. parameter name
 #: boxes/generators/notesholder.py
-msgid "slots"
+msgid "opening"
 msgstr ""
 
-#. help for parameter slots
+#. help for parameter opening
 #: boxes/generators/notesholder.py
-msgid "slots for grabbing the notes"
-msgstr ""
-
-#. possible choice for slots
-#: boxes/generators/notesholder.py
-msgid "one"
-msgstr ""
-
-#. possible choice for slots
-#: boxes/generators/notesholder.py
-msgid "two"
-msgstr ""
-
-#. possible choice for slots
-#: boxes/generators/notesholder.py
-msgid "four"
+msgid "percent of front that's open"
 msgstr ""
 
 #. name of box generator
@@ -1895,6 +2217,14 @@ msgstr ""
 msgid "pipe is closed at the top"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/otto.py
+msgid "Otto"
+msgstr ""
+
+msgid "Otto Settings"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/ottobody.py
 msgid "OttoBody"
@@ -2345,6 +2675,55 @@ msgstr ""
 msgid "Rack10Box Settings"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/rack19halfwidth.py
+msgid "Rack19HalfWidth"
+msgstr ""
+
+#. description of Rack19HalfWidth
+#: boxes/generators/rack19halfwidth.py
+msgid "Half width 19inch rack unit for musical equipment."
+msgstr ""
+
+msgid "Rack19HalfWidth Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/rack19halfwidth.py
+msgid "ru_count"
+msgstr ""
+
+#. help for parameter ru_count
+#: boxes/generators/rack19halfwidth.py
+msgid "number of rack units"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/rack19halfwidth.py
+msgid "holes"
+msgstr ""
+
+#. help for parameter holes
+#: boxes/generators/rack19halfwidth.py
+msgid ""
+"mounting patterns: x=xlr, m=midi, p=9v-power, w=6.5mm-wire, space=next row"
+msgstr ""
+
+#. help for parameter z
+#: boxes/generators/rack19halfwidth.py
+msgid "depth of the shorter (rackear) side"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/rack19halfwidth.py
+msgid "deepz"
+msgstr ""
+
+#. help for parameter deepz
+#: boxes/generators/rack19halfwidth.py
+msgid "depth of the longer (screwed to another half sized thing) side"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/rackbox.py
 msgid "RackBox"
@@ -2588,6 +2967,14 @@ msgstr ""
 msgid "round lid"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/regularbox2.py
+msgid "Box4"
+msgstr ""
+
+msgid "Box4 Settings"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/robotarm.py
 msgid "RobotArm"
@@ -3125,6 +3512,19 @@ msgstr ""
 msgid "bracing angle - less for more bracing"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/slatwallrollholder.py
+msgid "SlatwallRollHolder"
+msgstr ""
+
+#. description of SlatwallRollHolder
+#: boxes/generators/slatwallrollholder.py
+msgid "Hold a roll of paper towels to a slat wall"
+msgstr ""
+
+msgid "SlatwallRollHolder Settings"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/slatwallslottedholder.py
 msgid "SlatwallSlottedHolder"
@@ -3138,11 +3538,6 @@ msgstr ""
 msgid "SlatwallSlottedHolder Settings"
 msgstr ""
 
-#. parameter name
-#: boxes/generators/slatwallslottedholder.py
-msgid "slot_depth"
-msgstr ""
-
 #. help for parameter slot_depth
 #: boxes/generators/slatwallslottedholder.py
 msgid "depth of slots from the front"
@@ -3183,11 +3578,6 @@ msgstr ""
 msgid "radius of the slots at the front"
 msgstr ""
 
-#. parameter name
-#: boxes/generators/slatwallslottedholder.py
-msgid "number"
-msgstr ""
-
 #. help for parameter number
 #: boxes/generators/slatwallslottedholder.py
 msgid "number of tools/slots"
@@ -3261,12 +3651,12 @@ msgstr ""
 
 #. help for parameter depth
 #: boxes/generators/slatwallwrenchholder.py
-msgid "depth of the sides"
+msgid "depth of the sides (in mm)"
 msgstr ""
 
 #. help for parameter number
 #: boxes/generators/slatwallwrenchholder.py
-msgid "number of wrenches"
+msgid "number of wrenches (in mm)"
 msgstr ""
 
 #. parameter name
@@ -3276,7 +3666,7 @@ msgstr ""
 
 #. help for parameter min_width
 #: boxes/generators/slatwallwrenchholder.py
-msgid "width of smallest wrench"
+msgid "width of smallest wrench (in mm)"
 msgstr ""
 
 #. parameter name
@@ -3286,7 +3676,7 @@ msgstr ""
 
 #. help for parameter max_width
 #: boxes/generators/slatwallwrenchholder.py
-msgid "width of largest wrench"
+msgid "width of largest wrench (in mm)"
 msgstr ""
 
 #. parameter name
@@ -3296,7 +3686,7 @@ msgstr ""
 
 #. help for parameter min_strength
 #: boxes/generators/slatwallwrenchholder.py
-msgid "strength of smallest wrench"
+msgid "strength of smallest wrench (in mm)"
 msgstr ""
 
 #. parameter name
@@ -3306,7 +3696,17 @@ msgstr ""
 
 #. help for parameter max_strength
 #: boxes/generators/slatwallwrenchholder.py
-msgid "strength of largest wrench"
+msgid "strength of largest wrench (in mm)"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/slatwallwrenchholder.py
+msgid "extra_distance"
+msgstr ""
+
+#. help for parameter extra_distance
+#: boxes/generators/slatwallwrenchholder.py
+msgid "additional distance between wrenches (in mm)"
 msgstr ""
 
 #. name of box generator
@@ -3347,6 +3747,14 @@ msgstr ""
 msgid "radius at the slots"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/snowflake2.py
+msgid "Snowflake2"
+msgstr ""
+
+msgid "Snowflake2 Settings"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/stachel.py
 msgid "Stachel"
@@ -3459,6 +3867,57 @@ msgstr ""
 msgid "extend the triangle along the length of the edge"
 msgstr ""
 
+#. name of box generator
+#: boxes/generators/testbox.py
+msgid "TestBox"
+msgstr ""
+
+msgid "TestBox Settings"
+msgstr ""
+
+#. name of box generator
+#: boxes/generators/tetris.py
+msgid "Tetris"
+msgstr ""
+
+#. description of Tetris
+#: boxes/generators/tetris.py
+msgid "3D Tetris shapes"
+msgstr ""
+
+msgid "Tetris Settings"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/tetris.py
+msgid "blocksize"
+msgstr ""
+
+#. help for parameter blocksize
+#: boxes/generators/tetris.py
+msgid "size of a square"
+msgstr ""
+
+#. parameter name
+#: boxes/generators/tetris.py
+msgid "shape"
+msgstr ""
+
+#. help for parameter shape
+#: boxes/generators/tetris.py
+msgid "shape of the piece"
+msgstr ""
+
+#. possible choice for shape
+#: boxes/generators/tetris.py
+msgid "T"
+msgstr ""
+
+#. possible choice for shape
+#: boxes/generators/tetris.py
+msgid "Z"
+msgstr ""
+
 #. name of box generator
 #: boxes/generators/trafficlight.py
 msgid "TrafficLight"
@@ -3780,24 +4239,24 @@ msgstr ""
 msgid "no_verticals"
 msgstr ""
 
-#: scripts/boxesserver:180
+#: scripts/boxesserver:222
 #, python-format
 msgid "Boxes - %s"
 msgstr ""
 
-#: scripts/boxesserver:219
-msgid "Generate"
-msgstr ""
-
-#: scripts/boxesserver:247 scripts/boxesserver:267
+#: scripts/boxesserver:234 scripts/boxesserver:295 scripts/boxesserver:315
 msgid "Boxes.py"
 msgstr ""
 
-#: scripts/boxesserver:269
+#: scripts/boxesserver:261
+msgid "Generate"
+msgstr ""
+
+#: scripts/boxesserver:317
 msgid "Create boxes and more with a laser cutter!"
 msgstr ""
 
-#: scripts/boxesserver:272
+#: scripts/boxesserver:320
 msgid ""
 "\n"
 "        <a href=\"https://hackaday.io/project/10649-boxespy\">Boxes.py</a> "
@@ -3808,23 +4267,23 @@ msgid ""
 "cuts, holes and slots for screws, hinges, gears, pulleys and much more."
 msgstr ""
 
-#: scripts/boxesserver:320
+#: scripts/boxesserver:375
 msgid "Get Source at GitHub"
 msgstr ""
 
-#: scripts/boxesserver:321
+#: scripts/boxesserver:376
 msgid "Documentation and API Description"
 msgstr ""
 
-#: scripts/boxesserver:322
+#: scripts/boxesserver:377
 msgid "Hackaday.io Project Page"
 msgstr ""
 
-#: scripts/boxesserver:331
+#: scripts/boxesserver:386
 #, python-format
 msgid "Error generating %s"
 msgstr ""
 
-#: scripts/boxesserver:336
+#: scripts/boxesserver:391
 msgid "An error occurred!"
 msgstr ""
diff --git a/po/zh_CN.po b/po/zh_CN.po
index ba4257b..b47be2f 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -7,7 +7,7 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"PO-Revision-Date: 2019-08-25 10:02+0800\n"
+"PO-Revision-Date: 2019-10-04 16:09+0800\n"
 "Last-Translator: CNDK <z2889188672@gmail.com>\n"
 "Language-Team: Chinese (China)\n"
 "Language: zh_CN\n"
@@ -102,9 +102,7 @@ msgid "hi"
 msgstr "嗨"
 
 #. help for parameter hi
-msgid ""
-"inner height of inner walls in mm (unless outside selected)(leave to zero "
-"for same as outer walls)"
+msgid "inner height of inner walls in mm (unless outside selected)(leave to zero for same as outer walls)"
 msgstr "内墙的内部高度，单位为mm（除非选择外部）（与外部墙相同，保留为零）"
 
 #. parameter name
@@ -120,10 +118,7 @@ msgid "sy"
 msgstr "sy"
 
 #. help for parameter sy
-msgid ""
-"sections back to front in mm. Possible formats: overallwidth/numberof "
-"sections e.g. \"250/5\"; sectionwidth*numberofsections e.g. \"50*5\"; "
-"section widths separated by \":\" e.g. \"30:25.5:70"
+msgid "sections back to front in mm. Possible formats: overallwidth/numberof sections e.g. \"250/5\"; sectionwidth*numberofsections e.g. \"50*5\"; section widths separated by \":\" e.g. \"30:25.5:70"
 msgstr ""
 
 #. parameter name
@@ -200,7 +195,7 @@ msgstr "t"
 
 #. parameter name
 msgid "outside"
-msgstr "外部"
+msgstr "外部尺寸"
 
 #. help for parameter outside
 msgid "treat sizes as outside measurements that include the walls"
@@ -208,7 +203,7 @@ msgstr "将尺寸视为包括墙壁的外部测量"
 
 #. parameter name
 msgid "nema_mount"
-msgstr "NEMA安装"
+msgstr "nema安装"
 
 #. help for parameter nema_mount
 msgid "NEMA size of motor"
@@ -267,28 +262,27 @@ msgstr ""
 
 #. parameter name
 msgid "tabs"
-msgstr "标签"
+msgstr "切割缝隙"
 
 #. help for parameter tabs
-msgid ""
-"width of tabs holding the parts in place in mm (not supported everywhere)"
-msgstr "用mm固定零件的标签宽度(不支持任何地方)"
+msgid "width of tabs holding the parts in place in mm (not supported everywhere)"
+msgstr "用mm固定零件的切割缝隙宽度(不支持所有地方)"
 
 #. parameter name
 msgid "debug"
-msgstr "调试"
+msgstr "边框"
 
 #. help for parameter debug
 msgid "print surrounding boxes for some structures"
-msgstr "打印某些结构的周围框"
+msgstr "勾选后，生成的每个零件外围都会出现一个矩形框"
 
 #. parameter name
 msgid "reference"
-msgstr "引用"
+msgstr "定位框"
 
 #. help for parameter reference
 msgid "print reference rectangle with given length (zero to disable)"
-msgstr "具有给定长度的打印参考矩形(零以禁用)"
+msgstr "默认会在图纸底部生成一个长度100mm的矩形框，方便确定图纸尺寸，输入0则不生成"
 
 #. parameter name
 msgid "burn"
@@ -586,15 +580,21 @@ msgstr "切割角度"
 #. name of box generator
 #: boxes/generators/arcade.py
 msgid "Arcade"
-msgstr "拱廊"
+msgstr "街机游戏机"
 
 #. description of Arcade
 #: boxes/generators/arcade.py
 msgid "Desktop Arcade Maschine"
-msgstr ""
+msgstr "街机游戏机桌面"
 
 msgid "Arcade Settings"
-msgstr "拱廊设置"
+msgstr "街机游戏机设置"
+
+msgid "monitor_height"
+msgstr "显示器高度"
+
+msgid "keyboard_depth"
+msgstr "键盘深度"
 
 #. help for parameter width
 #: boxes/generators/arcade.py
@@ -874,9 +874,7 @@ msgstr "陈列柜"
 
 #. description of DisplayCase
 #: boxes/generators/displaycase.py
-msgid ""
-"Fully closed box intended to be cut from transparent acrylics and to serve "
-"as a display case."
+msgid "Fully closed box intended to be cut from transparent acrylics and to serve as a display case."
 msgstr "全封闭的盒子，用于从透明的丙烯酸树脂切割而成，用作展示柜。"
 
 msgid "DisplayCase Settings"
@@ -1626,23 +1624,19 @@ msgstr "Makita电源"
 
 #. description of MakitaPowerSupply
 #: boxes/generators/makitapowersupply.py
-msgid ""
-"Bench power supply powered with Maktia 18V battery or laptop power supply"
+msgid "Bench power supply powered with Maktia 18V battery or laptop power supply"
 msgstr "台式电源采用Makita 18V电池或笔记本电源供电"
 
 #. long description of MakitaPowerSupply in markdown
 #: boxes/generators/makitapowersupply.py
 msgid ""
 "\n"
-"Vitamins: DSP5005 (or similar) power supply, two banana sockets, two 4.8mm "
-"flat terminals with flat soldering tag\n"
+"Vitamins: DSP5005 (or similar) power supply, two banana sockets, two 4.8mm flat terminals with flat soldering tag\n"
 "\n"
-"To allow powering by laptop power supply: flip switch, Lenovo round socket "
-"(or adjust right  hole for different socket)\n"
+"To allow powering by laptop power supply: flip switch, Lenovo round socket (or adjust right  hole for different socket)\n"
 msgstr ""
 "\n"
-"维生素：DSP5005（或类似）电源，两个香蕉插座，两个4.8毫米带扁平焊接标签的扁平"
-"端子\n"
+"维生素：DSP5005（或类似）电源，两个香蕉插座，两个4.8毫米带扁平焊接标签的扁平端子\n"
 "\n"
 "允许通过笔记本电脑供电：翻转开关，联想圆形插座（或调整右侧孔用于不同插座）\n"
 
@@ -1813,9 +1807,7 @@ msgstr "口型比"
 
 #. help for parameter mouthratio
 #: boxes/generators/organpipe.py
-msgid ""
-"mouth to circumference ratio (0.1 to 0.45). Determines the width to depth "
-"ratio"
+msgid "mouth to circumference ratio (0.1 to 0.45). Determines the width to depth ratio"
 msgstr "口与周长比（0.1至0.45）。 确定宽深比"
 
 #. parameter name
@@ -1856,7 +1848,7 @@ msgstr "风压单位"
 #. help for parameter windpressure_units
 #: boxes/generators/organpipe.py
 msgid "in Pa"
-msgstr " "
+msgstr ""
 
 #. possible choice for windpressure_units
 #: boxes/generators/organpipe.py
@@ -2770,7 +2762,7 @@ msgstr "橡胶厚度"
 #. help for parameter rubberthickness
 #: boxes/generators/rotary.py
 msgid "diameter of the strings of the O rings"
-msgstr "O形圈的直径"
+msgstr "o形圈的直径"
 
 #. help for parameter axle
 #: boxes/generators/rotary.py
@@ -2842,14 +2834,8 @@ msgstr "你的皇家游戏"
 
 #. long description of RoyalGame in markdown
 #: boxes/generators/royalgame.py
-msgid ""
-"Most of the blue lines need to be engraved by cutting with high speed and "
-"low power. But there are three blue holes that actually need to be cut: The "
-"grip hole in the lid and two tiny rectangles on the top and bottom for the "
-"lid to grip into.\n"
-msgstr ""
-"大多数蓝线需要通过高速和低功率切割进行雕刻。 但实际上需要切割三个蓝洞：盖子"
-"上的抓握孔和顶部和底部的两个小矩形，以便盖住盖子。‪‪‪\n"
+msgid "Most of the blue lines need to be engraved by cutting with high speed and low power. But there are three blue holes that actually need to be cut: The grip hole in the lid and two tiny rectangles on the top and bottom for the lid to grip into.\n"
+msgstr "大多数蓝线需要通过高速和低功率切割进行雕刻。 但实际上需要切割三个蓝洞：盖子上的抓握孔和顶部和底部的两个小矩形，以便盖住盖子。‪‪‪\n"
 
 msgid "RoyalGame Settings"
 msgstr "皇家游戏设置"
@@ -3471,8 +3457,7 @@ msgstr "红绿灯"
 #. long description of TrafficLight in markdown
 #: boxes/generators/trafficlight.py
 msgid ""
-"The traffic light was created to visualize the status of a Icinga monitored "
-"system.\n"
+"The traffic light was created to visualize the status of a Icinga monitored system.\n"
 "\n"
 "When turned by 90°, it can be also used to create a bottle holder."
 msgstr ""
@@ -3519,8 +3504,7 @@ msgstr "托盘插入件"
 
 #. description of TrayInsert
 #: boxes/generators/trayinsert.py
-msgid ""
-"Tray insert without floor and outer walls - allows only continuous walls"
+msgid "Tray insert without floor and outer walls - allows only continuous walls"
 msgstr "不带地板和外墙的托盘插入件-仅允许连续墙"
 
 msgid "TrayInsert Settings"
@@ -3568,7 +3552,7 @@ msgid ""
 "A two piece box where top slips over the bottom half to form \n"
 "       the enclosure.\n"
 "    "
-msgstr "一个两件套的盒子，上面从下半部分滑落形成外壳。"
+msgstr "一个两件套的盒子，上面从下半部分滑落形成外壳 "
 
 msgid "TwoPiece Settings"
 msgstr "两件式设置"
@@ -3801,19 +3785,10 @@ msgstr "用激光切割机制作盒子等等！"
 #: scripts/boxesserver:272
 msgid ""
 "\n"
-"        <a href=\"https://hackaday.io/project/10649-boxespy\">Boxes.py</a> "
-"is an <a href=\"https://www.gnu.org/licenses/gpl-3.0.en.html\">Open Source</"
-"a> box generator written in <a href=\"https://www.python.org/\">Python</a>. "
-"It features both finished parametrized generators as well as a Python API "
-"for writing your own. It features finger and (flat) dovetail joints, flex "
-"cuts, holes and slots for screws, hinges, gears, pulleys and much more."
+"        <a href=\"https://hackaday.io/project/10649-boxespy\">Boxes.py</a> is an <a href=\"https://www.gnu.org/licenses/gpl-3.0.en.html\">Open Source</a> box generator written in <a href=\"https://www.python.org/\">Python</a>. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more."
 msgstr ""
 "\n"
-"        <a href=\"https://hackaday.io/project/10649-boxespy\">Boxes.py</a>是"
-"一个用<a href=\"https://www.python.org/\">Python</a>编写的<a href=\"https://"
-"www.gnu.org/licenses/gpl-3.0.en.html\">开源</a>盒子生成器。 它具有完成的参数"
-"化生成器以及用于编写自己的Python API。 它具有手指和（扁平）燕尾榫接头，柔性"
-"切口，螺钉，铰链，齿轮，滑轮等孔和槽。"
+"        <a href=\"https://hackaday.io/project/10649-boxespy\">Boxes.py</a>是一个用<a href=\"https://www.python.org/\">Python</a>编写的<a href=\"https://www.gnu.org/licenses/gpl-3.0.en.html\">开源</a>盒子生成器。 它具有完成的参数化生成器以及用于编写自己的Python API。 它具有手指和（扁平）燕尾榫接头，柔性切口，螺钉，铰链，齿轮，滑轮等孔和槽。"
 
 #: scripts/boxesserver:320
 msgid "Get Source at GitHub"
@@ -3835,3 +3810,79 @@ msgstr ""
 #: scripts/boxesserver:336
 msgid "An error occurred!"
 msgstr "发生错误！"
+
+#: scripts/boxesserver
+msgid "BayonetBox"
+msgstr "卡口盒"
+
+#: scripts/boxesserver
+msgid "BayonetBox Settings"
+msgstr "卡口盒设置"
+
+#: scripts/boxesserver
+msgid "Diameter of the box in mm"
+msgstr "包装盒直径（毫米）"
+
+#: scripts/boxesserver
+msgid "lugs"
+msgstr "锁止片"
+
+#: scripts/boxesserver
+msgid "Glue together. All outside rings to the bottom, all inside rings to the top."
+msgstr "粘在一起。所有外环到底部，所有内环到顶部。"
+
+#: scripts/boxesserver
+msgid "number of locking lugs"
+msgstr "锁止片数量"
+
+#: scripts/boxesserver
+msgid "Round box made from layers with twist on top"
+msgstr "圆形盒由多层制成，顶部有扭曲"
+
+#: scripts/boxesserver
+msgid "Rack19HalfWidth"
+msgstr "机架19半宽"
+
+#: scripts/boxesserver
+msgid "Half width 19inch rack unit for musical equipment."
+msgstr "用于音乐设备的半宽19英寸机架单元。"
+
+#: scripts/boxesserver
+msgid "Rack19HalfWidth Settings"
+msgstr "机架19半宽设置"
+
+#: scripts/boxesserver
+msgid "ru_count"
+msgstr "机架数"
+
+#: scripts/boxesserver
+msgid "number of rack units"
+msgstr "机架数量"
+
+#: scripts/boxesserver
+msgid "holes"
+msgstr "孔"
+
+#: scripts/boxesserver
+msgid "mounting patterns: x=xlr, m=midi, p=9v-power, w=6.5mm-wire, space=next row"
+msgstr "安装方式：X=XLR，M=MIDI，P=9V电源，W=6.5m m-线，间距=下一排"
+
+#: scripts/boxesserver
+msgid "depth of the shorter (rackear) side"
+msgstr "较短（机架）侧的深度"
+
+#: scripts/boxesserver
+msgid "depth of the longer (screwed to another half sized thing) side"
+msgstr "较长的深度（拧入另一半尺寸的物体）"
+
+#: scripts/boxesserver
+msgid "DividerTray"
+msgstr "分隔托盘"
+
+#: scripts/boxesserver
+msgid "Divider tray - rows and dividers"
+msgstr "分隔托盘-行和分隔器"
+
+#: scripts/boxesserver
+msgid "DividerTray Settings"
+msgstr "分隔托盘设置"