11340448fa
Add typing: magic methods
2023-01-09 07:55:59 +01:00
5fae61bd0d
Fix typos and docstrings
2023-01-02 16:15:13 +01:00
4d41b2ddb1
FingerHolesEdge: Add bottom_lip parameter
...
to support boxes that stack on top of each other like milk crates
2023-01-02 13:00:07 +01:00
b5d10334d0
StackableEdge: Add bottom_stabilizers parameter
...
to generate strips to be glued to the inside of bottom edges
2023-01-02 13:00:07 +01:00
9d6f535e01
Fix typing errors
2023-01-01 18:10:42 +01:00
ad38bb1eaf
Auto optimize imports
...
* Remove unused
* Rearrange imports (module > partial > project)
2022-12-31 20:33:49 +01:00
03879258e8
Remove trailing semicolon
2022-12-29 12:02:33 +01:00
2e98f0fee0
Remove Python 2.7 coding hint
2022-12-29 12:02:33 +01:00
6162383de1
Update edges.py
2022-12-25 18:08:59 +01:00
6ab0cef413
Use straight edge for slots SlottedEdge
...
Used the connecting edge due to an aliasing issue. This broke as the
FingerJointEdge now places fingers even for smaller lengths.
Thanks to Nic Jansma (https://github.com/nicjansma ) for reporting!
Resolves : #452
2022-11-12 09:17:56 +01:00
d782eb281c
FingerJointEdges: Better deal with short edges
...
Shrink surroundingspaces when need to still fit at least one finger. If
even one regular finger won't fit use a small rectangular style finger.
This is a bit hacky as the same logic is copied in both
FingerJointEdge and FingerHoles
2022-09-30 19:28:01 +02:00
bfaabc2619
Add HandleEdge
2022-09-24 08:36:00 +02:00
cd4949ccac
Only draw snap finger joint for wide fingers
...
and use rectangular fingers if width is smaller than 1.9
2022-08-20 09:03:21 +02:00
a41ffd6905
Add option for finger joints on the base and lid of hinged chests
2022-08-18 00:08:20 +02:00
dcff72bb47
Fix barbs and spring finger joint types
...
broken in 13170f0306https://github.com/tinohager ) for reporting!
Resolves : #420
2022-08-13 11:43:02 +02:00
db1ca9e505
MountingEdge: Fix typo and default
...
for side to "back"
2022-07-28 22:26:55 +02:00
13170f0306
FingerJoints: Move drawing fingers into function
...
so it can be reused by sub classes
2022-06-28 08:35:00 +02:00
c70eecd1d1
Convert given default values to proper type
...
for when converting Settings to parseargs to void the type changing by
careless new default values.
2022-06-28 08:35:00 +02:00
e414e73bf2
RoundedTriangleEdge: Reduce default height to 50
...
Avoid height of several generators becoming negative if
RoundedTriangleEdge is selceted with default values e.g. for
UniversalBox and TypeTray. These are only 100mm hight with outside
option being enabled.
Thanks to https://github.com/SuksAE , https://github.com/HaSHsss and
https://github.com/Arcturuss for pushing this issue.
Resolves : #406
Resolves : #305
2022-06-20 08:10:07 +02:00
362dd54e09
Move Slatwall classes to walledges
2022-06-10 23:01:54 +02:00
c289758749
CabinetHingeEdge: Fix spurious 270° corner
...
Resolves : #404 - Issue not found
2022-06-06 19:58:00 +02:00
20f45224fb
Add MountingEdge
...
and add it to top_edge.
2022-05-27 14:53:40 +02:00
ece304bf1f
Add labels to some generators
2022-05-14 10:35:58 +02:00
a7afc8b1b6
Add stackable top edge with finger holes
2022-05-04 22:19:35 +02:00
b9dbe1d2e8
chore: small description error
2022-03-30 23:18:46 +02:00
f1f829d5fb
FingerJoints: Add "snap" style
2022-03-27 22:09:32 +02:00
be0aec17cf
FingerJoints: Add "barb" style
2022-03-27 22:09:32 +02:00
ec6f784442
HingeSettings: Check axle for valid values
2022-03-21 12:10:12 +01:00
7eca5a6c05
Slatwall Edges: Redimentary DIN rail support
...
Added type parameter to SlatwallSettings
2022-02-11 19:17:40 +01:00
a364f603a8
Add extra_length to Finger Joint Settings
...
to allow extending the finger joints so burn marks can be ground off.
Thanks to all who have been pushing for this feature!
Resolves : #270
2022-01-16 15:18:11 +01:00
b7b74ab27f
Settings: Add "multiple of thickness"
...
where appropriate. Before that not indication on what the numbers
actually mean were given.
2022-01-07 22:22:03 +01:00
5810314331
DoveTailEdge: Fix edge without dove tails
2022-01-05 18:29:09 +01:00
2538f2fef3
Add optional "finger hold" to the sliding lid, present if "hole_width" > 0.
...
Also:
* add comments for the sliding lid parameters
* move groove-cutting logic to helper methods
Example usage:
scripts/boxes UniversalBox --bottom_edge=F --top_edge=L --Lid_spring=none --Lid_style=springs --x=100.0 --y=100.0 --h=100.0 --reference=0 --thickness=3.0 --Lid_hole_width=20
2021-06-12 11:46:37 +02:00
bdca0f1422
New StackableFeet edge without finger holes
...
first use of non ASCII edge char - what can you do...
2021-05-15 15:45:25 +02:00
b132569219
SlatWallSettings: Add hook_depth setting to fit into other slot styles
...
Some are not as deep as the ones this was originally created for
2021-04-18 18:27:44 +02:00
29183ed7ed
SlatWalls: Make pitch of the wall adjustable
...
Resolves : #312
2021-04-17 11:44:47 +02:00
632a96676a
Fix typo in RoundedTriangleFingerHolesEdge
2020-11-11 00:35:22 +01:00
47d3600016
Add RoundedTriangleFingerHolesEdge (T)
2020-11-09 19:15:55 +01:00
dfc2f075d9
Adding Grooved Edge (z, Z), example use in UnevenHeightBox
2020-09-29 20:40:18 +02:00
e35447e536
Fix FlexEdge to use separate path for the flex cut
...
to allow continous outlines for parts.
Resolves : #242
2020-09-15 17:44:58 +02:00
a0c04d10ca
Add description to ClickSettings
2020-08-04 23:42:12 +02:00
7c004e2d2c
New primitive: Boxes.step()
...
Outset a line by a given margin - negative values for insetting
2020-02-28 17:46:44 +01:00
dd0f2d748c
ChestHingeSettings: check pin_height for minimal size
2020-02-01 14:27:17 +01:00
0f3eb5b21a
StackableSettings: check angle for invalid values
2020-02-01 14:16:26 +01:00
8cb5a8e042
Check values of flex settings
2019-12-14 13:09:43 +01:00
fe9555a79f
checkValues
2019-12-14 13:09:43 +01:00
83b5363bc8
StackableEdge: Fix margin for upper (S) variant
2019-11-04 17:05:18 +01:00
cfbcbb065c
Clarify doc string for FingerJointSettings.play
2019-10-19 12:03:57 +02:00
13ecfc9914
Support springs for finger joints (FingerJointSettings.style)
...
Resolves : #177
2019-10-11 22:32:57 +02:00
9db79243f8
Make Slide-on Lid with pin easier to insert
...
Make slot half a thickness wider and round the corners
Resolves : #156
Thanks to Matthijs Kooijman for suggesting this change!
2019-08-17 00:05:13 +02:00
Rotzbua
Florian Festi
Alex Shargalin
suks.ae
Erik Snider
SuksAE
Guillaume Collic
Marcin Zukowski