3bd4dc9907
Fix spring hole offsets by burn in LidSideRight/Left
2019-07-27 13:30:06 +02:00
4691a65a29
Let LidSideRight/Left respect edge_width
...
This allows modifying the height of the wall that extends above the lid.
The box back wall (with holes) would already support edge_width, so this
makes it supported on all three walls where needed.
2019-07-27 13:30:06 +02:00
db1da4ec12
Fix hole positions offset by burn in FingerHoleEdge
...
When rendering the FingerHoleEdge, the current position would be
corrected for burn (e.g. it would be on the center of the laser path,
rather than the actual edge of the final part). However, the FingerHoles
class (or actually the rectangularHole method called by it) that draws
the actual holes already corrects for burn, which caused the hole
position to be offset by the burn value.
This offset was particularly problematic when making a sliding lid,
since the holes would not align perfectly with the lid, making it hard
to close the lid. With this change, the sliding slots in the side walls
and the holes in the back wall align perfectly (though only when the lid
settings have zero play, which is a separate problem).
This commit fixes FingerHoleEdge (and its subclass LidHoleEdge), but
there might be other users of the FingerHole class (usually indirectly
through boxes.fingerHolesAt) that still have the same problem.
2019-07-27 13:30:06 +02:00
eeb2c344d5
Clarify where l and L edges should be used
2019-07-27 13:30:06 +02:00
ca1a3575d0
forward holesSettings to hexHolesRectangle from within rectangularWall
2019-07-21 01:21:55 +02:00
c06b95d2d0
link: http -> https
2019-07-20 00:23:29 +02:00
0a55e9ca6b
Optimize SVG paths
...
Resolves #63
2019-07-19 21:49:55 +02:00
a38254667c
Remove no longer needed line in _template.py
2019-07-18 20:55:07 +02:00
6ae8acd568
[Docker] clean dnf cache to save space
...
about 150mb
2019-07-12 12:16:28 +02:00
17d7cd80ab
Don't show generators in modules starting with underscore (templates)
2019-07-12 00:47:09 +02:00
11174f2ecc
New generator SlatwallDrillBox
2019-07-12 00:43:06 +02:00
88e99a5726
New generator: FlexBox5
...
Resolves #147
2019-07-12 00:24:50 +02:00
e6f431ab15
New generator: MakitaPowerSupply
2019-07-07 16:26:29 +02:00
fff74cf382
Add metadata as a xml comment
...
Resolves #66
2019-07-07 13:43:04 +02:00
a19debf1bd
Rename remaining Slatwall generators from Sw* to Slatwall*
2019-07-04 22:59:32 +02:00
573b630adc
New generator: SlatwallPlaneHolder
2019-07-04 22:39:34 +02:00
31d46088c2
Move drawing to origin for SVGs
2019-07-04 17:52:28 +02:00
635a42a25e
Use eTree to caclulate the eytend of the drawing
...
Also check symbols (text character) now
2019-07-04 17:52:28 +02:00
d162c769b4
Use built in eTree implementation instead of lxml
2019-07-04 17:52:08 +02:00
4a9cdc8d8e
Switch to eTree as a xml library (instead of minidom)
2019-07-04 17:48:53 +02:00
443c8a1c38
properly rewrite svg viewPort using minidom for xml
...
This avoids raising the 'Not enough space for size' exception.
2019-07-04 17:48:53 +02:00
c3aac6f5eb
[Docker] clone without history to save space
2019-07-02 15:39:59 +02:00
abdab6866a
New generator: StorageRack - Box with rails to slide other boxes in
2019-06-30 20:53:42 +02:00
2f7603b4b4
New generator: SlatWallWrenchHolder
2019-06-30 20:53:42 +02:00
0105957c05
New generator: SlatWallChiselHolder
2019-06-30 17:19:02 +02:00
138dffbf2a
New generator: SlatWallCaliperHolder
2019-06-30 15:48:09 +02:00
be8aed394a
New generator: Slatwall PlaneHolder
2019-06-30 15:18:11 +02:00
09df973d69
New generator: SlatwallConsole - an outset and angled plate to mount stuff to
2019-06-22 00:07:23 +02:00
810c3dbe3e
New generator: SwTypeTray - a tray to hang at a slat wall
2019-06-22 00:05:57 +02:00
f1ce996aae
New generator: SwPliersHolder - a bar to hang pliers on
2019-06-22 00:04:30 +02:00
6c85ae7ea2
Add trapezoidSideWall() that supports radius param for additional strength
2019-06-21 23:16:59 +02:00
6a809e17e7
Move trapezoidWall() from UnevenHeightBox to Boxes class
2019-06-21 21:37:57 +02:00
01ca56fdce
Support all different section syntaxes (sx, sy, ...) side by side
2019-06-21 21:37:57 +02:00
db706fc939
SlatWall edges: Make bottom hook selectable, various fixes
2019-06-21 21:36:28 +02:00
1e35a3b9ed
New generator: SwSlottedHolder
...
A tool holder for slat wall
2019-06-21 21:22:10 +02:00
5cef906a9a
Add SlatWallHoleEdge (dD) classes
...
Similar to FigerHolesEdge (h)
2019-06-21 18:47:29 +02:00
9415a6864f
Add boxes/generators/_swtemplate.py as a starting point for Slat Wall boxes
2019-06-13 19:02:02 +02:00
aadf5ceafc
Add Edge types, example and UIGroup for slat wall compatible boxes
2019-06-13 19:00:32 +02:00
753422fa46
New generator DiscRack
...
A rack for storing disk-shaped objects vertically next to each other
2019-06-01 13:09:01 +02:00
18ea1a5ed4
boxesserver: Allow multi-line errors
...
Fixing potential cross-site scripting attacks in passing
2019-06-01 13:07:43 +02:00
e8e248994b
Add a StorageSelf generator. This is a shelf for storing TypeTray boxes.
...
It is based on TypeTray generator. The sh parameter replace the sx parameter.
It is not a subclasse of TypeTray in order to have the top and bottom at
the right place.
2019-06-01 12:52:34 +02:00
a6ca723759
Mirror holes on the other walls
...
to have them match up. Otherwise boxes with non symetric top edges don't fit
together.
Fixes #141
2019-05-11 17:18:10 +02:00
46157b2030
Add .mirrorX() and .mirrorY() wrappers
...
These are especially useful for warpping callbacks.
2019-05-11 17:17:11 +02:00
159db08c1c
Add picture for TrayLayout
2019-04-21 11:06:18 +02:00
93c2093ef3
AllEdges: Fix spacing and add edegs around the corner
...
to make it more clear which direction the edges are pointing.
Related #132
2019-04-14 18:17:09 +02:00
f22be6f6d5
Fix polygonWalls for inner corners
2019-04-14 18:17:09 +02:00
0b781ce7ef
Add turtle param to polygonWall
...
to allow using it as turtle graphic command instead of a part
2019-04-14 18:17:09 +02:00
dc11929258
Fix _polygonWallExtend for corners with negative angles
2019-04-14 18:17:09 +02:00
95dba0dee7
box: raise NotImplementedError
...
NotImplemented is a sentinel for comparisons; encountering this as an
exception would result in a meta-error.
2019-04-10 17:56:12 +02:00
83078d056f
Add python3-xcffib to Dockerfile to work with Fedora 29
2019-04-09 21:58:45 +02:00
Matthijs Kooijman
Marko Luther
Rotzbua
Florian Festi
Stefan Grosshauser
chrysn
Germain Lemasson