d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
aad270e67e
The Royal Game of Ur Images
2021-09-19 20:37:29 +02:00
cd604f0d53
CardBox: Fix height
...
Previously box was one thickness to low as the height of the lid was not
accounted for.
Thanks to hd (https://hackaday.io/hacker/1210037-hd ) for pointing this
out!
2021-09-03 13:59:11 +02:00
44cf852fac
Openbox: Add edgetype parameter
2021-07-18 15:37:04 +02:00
064cd71cd5
OpenBox: Remove unused bedbolt parameters
2021-07-18 15:37:04 +02:00
2154245cde
AngledBox: Render surrounding walls in order
2021-06-27 16:24:01 +02:00
a35674a736
Add labels to Cardbox
...
Added labels to CardBox
Also rearange some parts to make labels easier to read
2021-06-27 16:07:58 +02:00
c0eca5ea5f
Add labels to boxes
...
Added labels to AngledBox, BasedBox, ClosedBox, Console2, DinRailBox,
DisplayCase and ElectronicsBox
2021-06-27 16:07:58 +02:00
6238903237
Gears: Use proper metric module
...
with diameter / #teeth instead of circumference / #teeth.
Thanks to nialabert (https://github.com/nialabert ) for pointing this
out!
Resolves : #260
2021-06-26 10:58:25 +02:00
3ff0df504b
DoubleFlexDoorBox: Add picture
...
and move out of Unstable.
Thanks to Targor (https://github.com/targor ) for the idea and image
Resolves : #322
2021-06-13 09:23:37 +02:00
4df9c4aae9
Add labels to Ottobody
...
Using the label interface, render identifying labels on the Ottobody
2021-06-11 22:29:59 +02:00
ef94daa006
Add mouseover images for most groups
...
Resolves : #253
2021-06-05 18:25:53 +02:00
9a46882c8f
Add color selection to all holes
...
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
22a50a6181
PhoneHolder: Fix edge of second side being reversed
...
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.
Thanks to https://github.com/ChrisLaserman for reporting!
Resolves : #324
2021-05-31 17:04:17 +02:00
be7115007d
SlatwallPinRow: Make it actually work
...
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
bdcad5ee27
New generator: SlattwallStairs
...
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
538d5af99b
New generator: DoubleFlexDoorBox
...
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
b0861bf937
Add platonic solid generator
...
Resolves : #254
2021-05-16 15:07:53 +02:00
3a979bcfc6
Extend PaintStorage to make stackable drawers
...
Add an extra argument --drawer that changes it to a simple drawer
Co-authored-by: Florian Festi<florian@festi.info>
Resolves : #315
2021-05-16 14:58:18 +02:00
eec53625f7
New generator: SlatwalPinRow
...
Angled pins to hang stuff from.
Still untested.
2021-05-15 15:45:44 +02:00
072ff9b032
New generator: DrillStand
...
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
d478edd5d7
Add coffee capsule holder generator
2021-04-25 11:25:30 +02:00
41165731c9
DisplayShelf: Fix calculations for negative angle values
2021-04-02 16:11:11 +02:00
97d85ff10e
Add PhoneHolder
2021-03-22 22:45:55 +01:00
3a3304de67
mention similar ones in burn test
2021-03-22 19:45:06 +01:00
69bf15a682
serraded -> serrated typo
2021-03-22 19:41:33 +01:00
9bdd5e4dda
mentioned ClosedBox and BasedBox in each other descriptions
2021-03-20 21:26:54 +01:00
23ee7b3eb2
copy closedbox description to basedbox description as applicable
2021-03-20 21:26:54 +01:00
000ba92106
fix typo in description
2021-03-20 21:26:54 +01:00
e8fc07d33d
increase play in two piece to 0.15
...
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
7355d0d612
TrayLayout: Give more descriptive parse errors
...
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
7397e49b2b
TrayLayout: Add description text
...
Resolves : #295
2021-03-15 13:50:35 +01:00
Florian Festi
Guillaume Collic
iooner
0xfab1
jens persson
Norbert Szulc
Mateusz Konieczny