Commit Graph

470 Commits

Author SHA1 Message Date
Florian Festi d5654137a4 RoundedBox: Allow arbirtary horizontal layers
by changing h param to sh.

Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.

Resolves: #339

Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
Florian Festi ff6a2b955a CardBox: Put lid pieces together
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
Guillaume Collic 0c023f2e5f
Paperbox: Add second design better suited for smaller lids
Based on discussion in #351

Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
Florian Festi fdc8618900 Cardbox: point to the right picture in description 2022-01-02 11:08:49 +01:00
Florian Festi 9a98a50506 DrillBox: Move to Tray group 2021-12-15 14:18:17 +01:00
Florian Festi bfe39861fa DrillBox: Make layers adjustable
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.

Thanks to https://github.com/KittyDreadful for suggesting this!

Related: #339
2021-12-15 14:18:17 +01:00
Florian Festi 9b0ebad0e7 DrillBox: Make bottom edge configurable 2021-12-15 14:18:17 +01:00
Florian Festi 68e0bae6a9 DrillBox: Set finger joint details as defaults
instead of hard coding them
2021-12-15 14:18:17 +01:00
iooner 866714ef7e Fix Typo 2021-12-14 22:20:56 +01:00
Florian Festi b11f9b0f1a BinTray: Fix finger holes in side walls
Pattern was mirrored before.

Resolves: #348

Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
Florian Festi 8b791b32b6 TypeTray: Use h edge for sides if back_height is set
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
Florian Festi a0f8fdd975 TypeTray: Fix front when back_height is set
Side edges did not fit into side walls.

Resolves: #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
Florian Festi 4319b704dd DrillBox: Fix holes diameter
by removing radius vs diameter mixup

Resolves: #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
Florian Festi 40e56bf26f TypeTray: Add back_height parameter
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
Florian Festi c3faa8f5a8 Folder: Add settings tab for flex
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
Florian Festi cbbe8c11cc Shutterbox: More pictures
Thanks to Taylor Williams (https://github.com/tzwilliams)!
2021-09-26 17:33:29 +02:00
Florian Festi d6c8d965c3 RoundedBox: More pictures
Thanks to Taylor Williams (https://github.com/tzwilliams)!
2021-09-26 17:04:18 +02:00
Florian Festi a2678de3e2 SilverwareBox: Fix edge of surrounding wall
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
0xfab1 aad270e67e The Royal Game of Ur Images 2021-09-19 20:37:29 +02:00
Florian Festi cd604f0d53 CardBox: Fix height
Previously box was one thickness to low as the height of the lid was not
accounted for.

Thanks to hd (https://hackaday.io/hacker/1210037-hd) for pointing this
out!
2021-09-03 13:59:11 +02:00
Florian Festi 44cf852fac Openbox: Add edgetype parameter 2021-07-18 15:37:04 +02:00
Florian Festi 064cd71cd5 OpenBox: Remove unused bedbolt parameters 2021-07-18 15:37:04 +02:00
Florian Festi 2154245cde AngledBox: Render surrounding walls in order 2021-06-27 16:24:01 +02:00
jens persson a35674a736 Add labels to Cardbox
Added labels to CardBox
Also rearange some parts to make labels easier to read
2021-06-27 16:07:58 +02:00
jens persson c0eca5ea5f Add labels to boxes
Added labels to AngledBox, BasedBox, ClosedBox, Console2, DinRailBox,
DisplayCase and ElectronicsBox
2021-06-27 16:07:58 +02:00
Florian Festi 6238903237 Gears: Use proper metric module
with diameter / #teeth instead of circumference / #teeth.

Thanks to nialabert (https://github.com/nialabert) for pointing this
out!

Resolves: #260
2021-06-26 10:58:25 +02:00
Florian Festi 3ff0df504b DoubleFlexDoorBox: Add picture
and move out of Unstable.

Thanks to Targor (https://github.com/targor) for the idea and image

Resolves: #322
2021-06-13 09:23:37 +02:00
jens persson 4df9c4aae9 Add labels to Ottobody
Using the label interface, render identifying labels on the Ottobody
2021-06-11 22:29:59 +02:00
Florian Festi ef94daa006 Add mouseover images for most groups
Resolves: #253
2021-06-05 18:25:53 +02:00
jens persson 9a46882c8f Add color selection to all holes
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
jens persson c86ae75712 Parametrizise the drillbox 2021-06-03 21:40:11 +02:00
Florian Festi 22a50a6181 PhoneHolder: Fix edge of second side being reversed
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.

Thanks to https://github.com/ChrisLaserman for reporting!

Resolves: #324
2021-05-31 17:04:17 +02:00
Florian Festi be7115007d SlatwallPinRow: Make it actually work
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
Florian Festi bdcad5ee27 New generator: SlattwallStairs
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
Florian Festi 538d5af99b New generator: DoubleFlexDoorBox
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
Norbert Szulc b0861bf937
Add platonic solid generator
Resolves: #254
2021-05-16 15:07:53 +02:00
jens persson 3a979bcfc6 Extend PaintStorage to make stackable drawers
Add an extra argument --drawer that changes it to a simple drawer

Co-authored-by: Florian Festi<florian@festi.info>
Resolves: #315
2021-05-16 14:58:18 +02:00
Florian Festi eec53625f7 New generator: SlatwalPinRow
Angled pins to hang stuff from.

Still untested.
2021-05-15 15:45:44 +02:00
Florian Festi 072ff9b032 New generator: DrillStand
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
Guillaume Collic d478edd5d7 Add coffee capsule holder generator 2021-04-25 11:25:30 +02:00
Florian Festi 41165731c9 DisplayShelf: Fix calculations for negative angle values 2021-04-02 16:11:11 +02:00
Guillaume Collic 97d85ff10e Add PhoneHolder 2021-03-22 22:45:55 +01:00
Mateusz Konieczny 3a3304de67 mention similar ones in burn test 2021-03-22 19:45:06 +01:00
Mateusz Konieczny 69bf15a682 serraded -> serrated typo 2021-03-22 19:41:33 +01:00
Mateusz Konieczny 9bdd5e4dda mentioned ClosedBox and BasedBox in each other descriptions 2021-03-20 21:26:54 +01:00
Mateusz Konieczny 23ee7b3eb2 copy closedbox description to basedbox description as applicable 2021-03-20 21:26:54 +01:00
Mateusz Konieczny 000ba92106 fix typo in description 2021-03-20 21:26:54 +01:00
Mateusz Konieczny e8fc07d33d increase play in two piece to 0.15
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
Florian Festi 7355d0d612 TrayLayout: Give more descriptive parse errors
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
Florian Festi 7397e49b2b TrayLayout: Add description text
Resolves: #295
2021-03-15 13:50:35 +01:00