boxes

• boxes package
  • Subpackage boxes.generators
    • UIGroup
      • UIGroup.add()
      • UIGroup.image
      • UIGroup.thumbnail
    • getAllBoxGenerators()
    • getAllGeneratorModules()
  • Submodules
  • boxes.Color module
    • Color
      • Color.ANNOTATIONS
      • Color.BLACK
      • Color.BLUE
      • Color.CYAN
      • Color.ETCHING
      • Color.ETCHING_DEEP
      • Color.GREEN
      • Color.INNER_CUT
      • Color.MAGENTA
      • Color.OUTER_CUT
      • Color.RED
      • Color.WHITE
      • Color.YELLOW
  • boxes.edges module
    • BaseEdge
      • BaseEdge.char
      • BaseEdge.description
      • BaseEdge.endAngle()
      • BaseEdge.endwidth()
      • BaseEdge.margin()
      • BaseEdge.spacing()
      • BaseEdge.startAngle()
      • BaseEdge.startwidth()
    • BoltPolicy
      • BoltPolicy.drawbolt()
      • BoltPolicy.numFingers()
    • Bolts
      • Bolts.drawBolt()
      • Bolts.numFingers()
    • CabinetHingeEdge
      • CabinetHingeEdge.char
      • CabinetHingeEdge.description
      • CabinetHingeEdge.parts()
      • CabinetHingeEdge.startwidth()
    • CabinetHingeSettings
      • CabinetHingeSettings.absolute_params
      • CabinetHingeSettings.edgeObjects()
      • CabinetHingeSettings.relative_params
    • ChestHinge
      • ChestHinge.char
      • ChestHinge.description
      • ChestHinge.endwidth()
      • ChestHinge.margin()
      • ChestHinge.startwidth()
    • ChestHingeFront
      • ChestHingeFront.char
      • ChestHingeFront.description
      • ChestHingeFront.startwidth()
    • ChestHingePin
      • ChestHingePin.char
      • ChestHingePin.description
      • ChestHingePin.margin()
    • ChestHingeSettings
      • ChestHingeSettings.absolute_params
      • ChestHingeSettings.checkValues()
      • ChestHingeSettings.edgeObjects()
      • ChestHingeSettings.pinheight()
      • ChestHingeSettings.relative_params
    • ChestHingeTop
      • ChestHingeTop.char
      • ChestHingeTop.endwidth()
      • ChestHingeTop.margin()
      • ChestHingeTop.startwidth()
    • ClickConnector
      • ClickConnector.char
      • ClickConnector.description
      • ClickConnector.finger()
      • ClickConnector.hook()
      • ClickConnector.hookOffset()
      • ClickConnector.hookWidth()
      • ClickConnector.margin()
    • ClickEdge
      • ClickEdge.char
      • ClickEdge.description
      • ClickEdge.margin()
      • ClickEdge.startwidth()
    • ClickSettings
      • ClickSettings.absolute_params
      • ClickSettings.edgeObjects()
      • ClickSettings.relative_params
    • CompoundEdge
      • CompoundEdge.description
      • CompoundEdge.endwidth()
      • CompoundEdge.margin()
      • CompoundEdge.startwidth()
    • CrossingFingerHoleEdge
      • CrossingFingerHoleEdge.char
      • CrossingFingerHoleEdge.description
    • DoveTailJoint
      • DoveTailJoint.char
      • DoveTailJoint.description
      • DoveTailJoint.margin()
      • DoveTailJoint.positive
    • DoveTailJointCounterPart
      • DoveTailJointCounterPart.char
      • DoveTailJointCounterPart.description
      • DoveTailJointCounterPart.margin()
      • DoveTailJointCounterPart.positive
    • DoveTailSettings
      • DoveTailSettings.absolute_params
      • DoveTailSettings.edgeObjects()
      • DoveTailSettings.relative_params
    • Edge
      • Edge.char
      • Edge.description
      • Edge.positive
    • FingerHoleEdge
      • FingerHoleEdge.char
      • FingerHoleEdge.description
      • FingerHoleEdge.startwidth()
    • FingerHoles
    • FingerJointBase
      • FingerJointBase.calcFingers()
      • FingerJointBase.fingerLength()
    • FingerJointEdge
      • FingerJointEdge.char
      • FingerJointEdge.description
      • FingerJointEdge.draw_finger()
      • FingerJointEdge.margin()
      • FingerJointEdge.positive
      • FingerJointEdge.startwidth()
    • FingerJointEdgeCounterPart
      • FingerJointEdgeCounterPart.char
      • FingerJointEdgeCounterPart.description
      • FingerJointEdgeCounterPart.positive
    • FingerJointSettings
      • FingerJointSettings.absolute_params
      • FingerJointSettings.checkValues()
      • FingerJointSettings.edgeObjects()
      • FingerJointSettings.relative_params
    • FlexEdge
      • FlexEdge.char
      • FlexEdge.description
    • FlexSettings
      • FlexSettings.absolute_params
      • FlexSettings.checkValues()
      • FlexSettings.relative_params
    • GearSettings
      • GearSettings.absolute_params
      • GearSettings.relative_params
    • GripSettings
      • GripSettings.absolute_params
      • GripSettings.edgeObjects()
      • GripSettings.relative_params
    • GrippingEdge
      • GrippingEdge.bumps()
      • GrippingEdge.char
      • GrippingEdge.description
      • GrippingEdge.margin()
      • GrippingEdge.wave()
    • GroovedEdge
      • GroovedEdge.char
      • GroovedEdge.description
      • GroovedEdge.inverse
    • GroovedEdgeBase
      • GroovedEdgeBase.groove_arc()
      • GroovedEdgeBase.groove_soft_arc()
      • GroovedEdgeBase.groove_triangle()
      • GroovedEdgeBase.is_inverse()
    • GroovedEdgeCounterPart
      • GroovedEdgeCounterPart.char
      • GroovedEdgeCounterPart.description
      • GroovedEdgeCounterPart.inverse
    • GroovedSettings
      • GroovedSettings.PARAM_ARC
      • GroovedSettings.PARAM_FLAT
      • GroovedSettings.PARAM_SOFTARC
      • GroovedSettings.PARAM_TRIANGLE
      • GroovedSettings.absolute_params
      • GroovedSettings.edgeObjects()
    • HandleEdge
      • HandleEdge.char
      • HandleEdge.description
      • HandleEdge.extra_height
      • HandleEdge.margin()
    • HandleEdgeSettings
      • HandleEdgeSettings.absolute_params
      • HandleEdgeSettings.edgeObjects()
      • HandleEdgeSettings.relative_params
    • HandleHoleEdge
      • HandleHoleEdge.char
      • HandleHoleEdge.description
      • HandleHoleEdge.extra_height
      • HandleHoleEdge.margin()
    • Hinge
      • Hinge.char
      • Hinge.description
      • Hinge.flush()
      • Hinge.flushlen()
      • Hinge.margin()
      • Hinge.outset()
      • Hinge.outsetlen()
    • HingePin
      • HingePin.char
      • HingePin.description
      • HingePin.endwidth()
      • HingePin.flush()
      • HingePin.flushlen()
      • HingePin.margin()
      • HingePin.outset()
      • HingePin.outsetlen()
      • HingePin.startwidth()
    • HingeSettings
      • HingeSettings.absolute_params
      • HingeSettings.checkValues()
      • HingeSettings.edgeObjects()
      • HingeSettings.relative_params
    • LidEdge
      • LidEdge.char
      • LidEdge.description
    • LidHoleEdge
      • LidHoleEdge.char
      • LidHoleEdge.description
    • LidLeft
      • LidLeft.char
      • LidLeft.description
      • LidLeft.rightside
    • LidRight
      • LidRight.char
      • LidRight.description
      • LidRight.endwidth()
      • LidRight.margin()
      • LidRight.rightside
      • LidRight.startwidth()
    • LidSettings
      • LidSettings.absolute_params
      • LidSettings.edgeObjects()
      • LidSettings.relative_params
    • LidSideLeft
      • LidSideLeft.char
      • LidSideLeft.description
      • LidSideLeft.rightside
    • LidSideRight
      • LidSideRight.char
      • LidSideRight.description
      • LidSideRight.endwidth()
      • LidSideRight.margin()
      • LidSideRight.rightside
      • LidSideRight.startwidth()
    • MountingEdge
      • MountingEdge.char
      • MountingEdge.description
      • MountingEdge.margin()
      • MountingEdge.startwidth()
    • MountingSettings
      • MountingSettings.PARAM_BACK
      • MountingSettings.PARAM_EXT
      • MountingSettings.PARAM_FRONT
      • MountingSettings.PARAM_IN
      • MountingSettings.PARAM_LEFT
      • MountingSettings.PARAM_RIGHT
      • MountingSettings.PARAM_TAB
      • MountingSettings.absolute_params
      • MountingSettings.edgeObjects()
    • OutSetEdge
      • OutSetEdge.char
      • OutSetEdge.description
      • OutSetEdge.positive
      • OutSetEdge.startwidth()
    • RackEdge
      • RackEdge.char
      • RackEdge.description
      • RackEdge.margin()
    • RoundedTriangleEdge
      • RoundedTriangleEdge.char
      • RoundedTriangleEdge.description
      • RoundedTriangleEdge.margin()
    • RoundedTriangleEdgeSettings
      • RoundedTriangleEdgeSettings.absolute_params
      • RoundedTriangleEdgeSettings.edgeObjects()
      • RoundedTriangleEdgeSettings.relative_params
    • RoundedTriangleFingerHolesEdge
      • RoundedTriangleFingerHolesEdge.char
      • RoundedTriangleFingerHolesEdge.startwidth()
    • Settings
      • Settings.absolute_params
      • Settings.checkValues()
      • Settings.edgeObjects()
      • Settings.parserArguments()
      • Settings.relative_params
      • Settings.setValues()
    • Slot
      • Slot.description
    • SlottedEdge
      • SlottedEdge.description
      • SlottedEdge.endwidth()
      • SlottedEdge.margin()
      • SlottedEdge.startwidth()
    • StackableBaseEdge
      • StackableBaseEdge.bottom
      • StackableBaseEdge.char
      • StackableBaseEdge.description
      • StackableBaseEdge.margin()
      • StackableBaseEdge.startwidth()
    • StackableEdge
      • StackableEdge.char
      • StackableEdge.description
    • StackableEdgeTop
      • StackableEdgeTop.bottom
      • StackableEdgeTop.char
      • StackableEdgeTop.description
    • StackableFeet
      • StackableFeet.char
      • StackableFeet.description
    • StackableHoleEdgeTop
      • StackableHoleEdgeTop.bottom
      • StackableHoleEdgeTop.char
      • StackableHoleEdgeTop.description
      • StackableHoleEdgeTop.startwidth()
    • StackableSettings
      • StackableSettings.absolute_params
      • StackableSettings.checkValues()
      • StackableSettings.edgeObjects()
      • StackableSettings.relative_params
    • argparseSections()
    • getDescriptions()
  • boxes.formats module
    • Formats
      • Formats.convert()
      • Formats.formats
      • Formats.getFormats()
      • Formats.getSurface()
      • Formats.http_headers
      • Formats.pstoedit_candidates
  • boxes.gears module
    • Gears
      • Gears.calc_circular_pitch()
      • Gears.drawPoints()
      • Gears.gearCarrier()
      • Gears.generate_spokes()
      • Gears.sizes()
    • OptionParser
      • OptionParser.add_option()
      • OptionParser.types
    • gear_calculations()
    • generate_rack_points()
    • generate_spur_points()
    • have_undercut()
    • inkbool()
    • involute_intersect_angle()
    • linspace()
    • point_on_circle()
    • undercut_max_k()
    • undercut_min_angle()
    • undercut_min_teeth()
  • boxes.lids module
  • boxes.mounts module
  • boxes.parts module
    • Parts
      • Parts.concaveKnob()
      • Parts.disc()
      • Parts.ringSegment()
      • Parts.waivyKnob()
    • arcOnCircle()
  • boxes.pulley module
    • Pulley
      • Pulley.diameter()
      • Pulley.drawPoints()
      • Pulley.getProfiles()
      • Pulley.profile_data
      • Pulley.spacing
      • Pulley.teeth
    • mirrorx()
    • tooth_spaceing_curvefit()
    • tooth_spacing()
  • boxes.robot module
    • RobotArg
      • RobotArg.choices()
      • RobotArg.html()
    • RobotArmMM
    • RobotArmMm
    • RobotArmMu
    • RobotArmUU
    • RobotArmUu
  • boxes.servos module
    • EyeEdge
      • EyeEdge.char
      • EyeEdge.margin()
      • EyeEdge.startwidth()
    • Servo
      • Servo.edges()
    • Servo9g
      • Servo9g.axle_pos
      • Servo9g.bottom()
      • Servo9g.front()
      • Servo9g.height
      • Servo9g.hinge_depth()
      • Servo9g.hinge_width()
      • Servo9g.length
      • Servo9g.servo_axle
      • Servo9g.top()
      • Servo9g.width
    • Servo9gt
      • Servo9gt.bottom()
      • Servo9gt.front()
      • Servo9gt.height
      • Servo9gt.top()
    • ServoArg
      • ServoArg.choices()
      • ServoArg.html()
    • buildEdges()
  • boxes.svgutil module
    • getSizeInMM()
    • getViewBox()
    • svgMerge()
    • ticksPerMM()
  • boxes.vectors module
    • circlepoint()
    • dotproduct()
    • kerf()
    • mmul()
    • normalize()
    • rotm()
    • tangent()
    • vadd()
    • vclip()
    • vdiff()
    • vlength()
    • vorthogonal()
    • vscalmul()
    • vtransl()
  • Module contents
    • ArgparseEdgeType
      • ArgparseEdgeType.edges
      • ArgparseEdgeType.html()
      • ArgparseEdgeType.inx()
      • ArgparseEdgeType.names
    • BoolArg
      • BoolArg.html()
    • Boxes
      • Boxes.NEMA()
      • Boxes.TX()
      • Boxes.addPart()
      • Boxes.addParts()
      • Boxes.addSettingsArgs()
      • Boxes.adjustSize()
      • Boxes.bedBoltHole()
      • Boxes.buildArgParser()
      • Boxes.cc()
      • Boxes.circle()
      • Boxes.close()
      • Boxes.corner()
      • Boxes.curveTo()
      • Boxes.dHole()
      • Boxes.description
      • Boxes.edge()
      • Boxes.edgeCorner()
      • Boxes.fillHoles()
      • Boxes.fingerHoleRectangle()
      • Boxes.flangedWall()
      • Boxes.flatHole()
      • Boxes.flex2D()
      • Boxes.getEntry()
      • Boxes.grip()
      • Boxes.handle()
      • Boxes.hexHolesCircle()
      • Boxes.hexHolesHex()
      • Boxes.hexHolesPlate()
      • Boxes.hexHolesRectangle()
      • Boxes.hole()
      • Boxes.latch()
      • Boxes.mirrorX()
      • Boxes.mirrorY()
      • Boxes.mountingHole()
      • Boxes.move()
      • Boxes.moveArc()
      • Boxes.moveTo()
      • Boxes.nema_sizes
      • Boxes.open()
      • Boxes.parseArgs()
      • Boxes.partsMatrix()
      • Boxes.polygonWall()
      • Boxes.polygonWalls()
      • Boxes.polyline()
      • Boxes.rectangularHole()
      • Boxes.rectangularTriangle()
      • Boxes.rectangularWall()
      • Boxes.regularPolygon()
      • Boxes.regularPolygonAt()
      • Boxes.regularPolygonHole()
      • Boxes.regularPolygonWall()
      • Boxes.render()
      • Boxes.roundedPlate()
      • Boxes.saved_context()
      • Boxes.set_font()
      • Boxes.set_source_color()
      • Boxes.showBorderPoly()
      • Boxes.step()
      • Boxes.surroundingWall()
      • Boxes.surroundingWallPiece()
      • Boxes.text()
      • Boxes.trapezoidSideWall()
      • Boxes.trapezoidWall()
      • Boxes.tx_sizes
      • Boxes.ui_group
      • Boxes.webinterface
    • HexHolesSettings
      • HexHolesSettings.absolute_params
      • HexHolesSettings.relative_params
    • NutHole
      • NutHole.sizes
    • argparseSections()
    • dist()
    • fillHolesSettings
      • fillHolesSettings.absolute_params
    • holeCol()
    • restore()