Profouzors
/
boxespy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
boxespy/po/boxes.py.pot

7753 lines
160 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-01-05 15:02+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. e edge description
#: boxes/edges.py
msgid "Straight Edge"
msgstr ""
#. e edge description
#: boxes/edges.py
msgid "e Straight Edge"
msgstr ""
#. E edge description
#: boxes/edges.py
msgid "Straight Edge (outset by thickness)"
msgstr ""
#. E edge description
#: boxes/edges.py
msgid "E Straight Edge (outset by thickness)"
msgstr ""
#. G edge description
#: boxes/edges.py
msgid "Edge with pear shaped mounting holes"
msgstr ""
#. G edge description
#: boxes/edges.py
msgid "G Edge with pear shaped mounting holes"
msgstr ""
#. z edge description
#: boxes/edges.py
msgid "Edge with grooves"
msgstr ""
#. z edge description
#: boxes/edges.py
msgid "z Edge with grooves"
msgstr ""
#. Z edge description
#: boxes/edges.py
msgid "Edge with grooves (opposing side)"
msgstr ""
#. Z edge description
#: boxes/edges.py
msgid "Z Edge with grooves (opposing side)"
msgstr ""
#. g edge description
#: boxes/edges.py
msgid "Corrugated edge useful as an gipping area"
msgstr ""
#. g edge description
#: boxes/edges.py
msgid "g Corrugated edge useful as an gipping area"
msgstr ""
#. f edge description
#: boxes/edges.py
msgid "Finger Joint"
msgstr ""
#. f edge description
#: boxes/edges.py
msgid "f Finger Joint"
msgstr ""
#. F edge description
#: boxes/edges.py
msgid "Finger Joint (opposing side)"
msgstr ""
#. F edge description
#: boxes/edges.py
msgid "F Finger Joint (opposing side)"
msgstr ""
#. h edge description
#: boxes/edges.py
msgid "Edge (parallel Finger Joint Holes)"
msgstr ""
#. h edge description
#: boxes/edges.py
msgid "h Edge (parallel Finger Joint Holes)"
msgstr ""
#. | edge description
#: boxes/edges.py
msgid "Edge (orthogonal Finger Joint Holes)"
msgstr ""
#. | edge description
#: boxes/edges.py
msgid "| Edge (orthogonal Finger Joint Holes)"
msgstr ""
#. s edge description
#: boxes/edges.py
msgid "Stackable (bottom, finger joint holes)"
msgstr ""
#. s edge description
#: boxes/edges.py
msgid "s Stackable (bottom, finger joint holes)"
msgstr ""
#. S edge description
#: boxes/edges.py
msgid "Stackable (top)"
msgstr ""
#. S edge description
#: boxes/edges.py
msgid "S Stackable (top)"
msgstr ""
#. š edge description
#: boxes/edges.py
msgid "Stackable feet (bottom)"
msgstr ""
#. š edge description
#: boxes/edges.py
msgid "š Stackable feet (bottom)"
msgstr ""
#. Š edge description
#: boxes/edges.py
msgid "Stackable edge with finger holes (top)"
msgstr ""
#. Š edge description
#: boxes/edges.py
msgid "Š Stackable edge with finger holes (top)"
msgstr ""
#. i edge description
#: boxes/edges.py
msgid "Straight edge with hinge eye"
msgstr ""
#. i edge description
#: boxes/edges.py
msgid "i Straight edge with hinge eye"
msgstr ""
#. I edge description
#: boxes/edges.py
msgid "Edge with hinge pin"
msgstr ""
#. I edge description
#: boxes/edges.py
msgid "I Edge with hinge pin"
msgstr ""
#. o edge description
#: boxes/edges.py
msgid "Edge with chest hinge"
msgstr ""
#. o edge description
#: boxes/edges.py
msgid "o Edge with chest hinge"
msgstr ""
#. p edge description
#: boxes/edges.py
msgid "p Edge with chest hinge"
msgstr ""
#. q edge description
#: boxes/edges.py
msgid "Edge with pins for an chest hinge"
msgstr ""
#. q edge description
#: boxes/edges.py
msgid "q Edge with pins for an chest hinge"
msgstr ""
#. Q edge description
#: boxes/edges.py
msgid "Edge opposing a chest hinge"
msgstr ""
#. Q edge description
#: boxes/edges.py
msgid "Q Edge opposing a chest hinge"
msgstr ""
#. u edge description
#: boxes/edges.py
msgid "Edge with cabinet hinges"
msgstr ""
#. u edge description
#: boxes/edges.py
msgid "u Edge with cabinet hinges"
msgstr ""
#. l edge description
#: boxes/edges.py
msgid "Edge for slide on lid (back)"
msgstr ""
#. l edge description
#: boxes/edges.py
msgid "l Edge for slide on lid (back)"
msgstr ""
#. L edge description
#: boxes/edges.py
msgid "Edge for slide on lid (box back)"
msgstr ""
#. L edge description
#: boxes/edges.py
msgid "L Edge for slide on lid (box back)"
msgstr ""
#. n edge description
#: boxes/edges.py
msgid "Edge for slide on lid (right)"
msgstr ""
#. n edge description
#: boxes/edges.py
msgid "n Edge for slide on lid (right)"
msgstr ""
#. m edge description
#: boxes/edges.py
msgid "Edge for slide on lid (left)"
msgstr ""
#. m edge description
#: boxes/edges.py
msgid "m Edge for slide on lid (left)"
msgstr ""
#. N edge description
#: boxes/edges.py
msgid "Edge for slide on lid (box right)"
msgstr ""
#. N edge description
#: boxes/edges.py
msgid "N Edge for slide on lid (box right)"
msgstr ""
#. M edge description
#: boxes/edges.py
msgid "Edge for slide on lid (box left)"
msgstr ""
#. M edge description
#: boxes/edges.py
msgid "M Edge for slide on lid (box left)"
msgstr ""
#. c edge description
#: boxes/edges.py
msgid "Click on (bottom side)"
msgstr ""
#. c edge description
#: boxes/edges.py
msgid "c Click on (bottom side)"
msgstr ""
#. C edge description
#: boxes/edges.py
msgid "Click on (top)"
msgstr ""
#. C edge description
#: boxes/edges.py
msgid "C Click on (top)"
msgstr ""
#. d edge description
#: boxes/edges.py
msgid "Dove Tail Joint"
msgstr ""
#. d edge description
#: boxes/edges.py
msgid "d Dove Tail Joint"
msgstr ""
#. D edge description
#: boxes/edges.py
msgid "Dove Tail Joint (opposing side)"
msgstr ""
#. D edge description
#: boxes/edges.py
msgid "D Dove Tail Joint (opposing side)"
msgstr ""
#. X edge description
#: boxes/edges.py
msgid "Flex cut"
msgstr ""
#. X edge description
#: boxes/edges.py
msgid "X Flex cut"
msgstr ""
#. R edge description
#: boxes/edges.py
msgid "Rack (and pinion) Edge"
msgstr ""
#. R edge description
#: boxes/edges.py
msgid "R Rack (and pinion) Edge"
msgstr ""
#. t edge description
#: boxes/edges.py
msgid "Triangle for handle"
msgstr ""
#. t edge description
#: boxes/edges.py
msgid "t Triangle for handle"
msgstr ""
#. T edge description
#: boxes/edges.py
msgid "T Triangle for handle"
msgstr ""
#. y edge description
#: boxes/edges.py
msgid "Handle for e.g. a drawer"
msgstr ""
#. y edge description
#: boxes/edges.py
msgid "y Handle for e.g. a drawer"
msgstr ""
#. Y edge description
#: boxes/edges.py
msgid "Handle with holes for parallel finger joint"
msgstr ""
#. Y edge description
#: boxes/edges.py
msgid "Y Handle with holes for parallel finger joint"
msgstr ""
#. j edge description
#: boxes/edges.py
msgid "Straight edge with hinge eye (other end)"
msgstr ""
#. j edge description
#: boxes/edges.py
msgid "j Straight edge with hinge eye (other end)"
msgstr ""
#. J edge description
#: boxes/edges.py
msgid "Edge with hinge pin (other end)"
msgstr ""
#. J edge description
#: boxes/edges.py
msgid "J Edge with hinge pin (other end)"
msgstr ""
#. k edge description
#: boxes/edges.py
msgid "Straight edge with hinge eye (both ends)"
msgstr ""
#. k edge description
#: boxes/edges.py
msgid "k Straight edge with hinge eye (both ends)"
msgstr ""
#. K edge description
#: boxes/edges.py
msgid "Edge with hinge pin (both ends)"
msgstr ""
#. K edge description
#: boxes/edges.py
msgid "K Edge with hinge pin (both ends)"
msgstr ""
#. O edge description
#: boxes/edges.py
msgid "Edge with chest hinge (other end)"
msgstr ""
#. O edge description
#: boxes/edges.py
msgid "O Edge with chest hinge (other end)"
msgstr ""
#. P edge description
#: boxes/edges.py
msgid "P Edge with chest hinge (other end)"
msgstr ""
#. U edge description
#: boxes/edges.py
msgid "Edge with cabinet hinges top side"
msgstr ""
#. U edge description
#: boxes/edges.py
msgid "U Edge with cabinet hinges top side"
msgstr ""
#. v edge description
#: boxes/edges.py
msgid "Edge with cabinet hinges for 90° lid"
msgstr ""
#. v edge description
#: boxes/edges.py
msgid "v Edge with cabinet hinges for 90° lid"
msgstr ""
#. V edge description
#: boxes/edges.py
msgid "Edge with cabinet hinges 90° lid"
msgstr ""
#. V edge description
#: boxes/edges.py
msgid "V Edge with cabinet hinges 90° lid"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Box"
msgstr ""
#. title of group Box
#: boxes/generators/__init__.py
msgid "Boxes"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "FlexBox"
msgstr ""
#. title of group FlexBox
#: boxes/generators/__init__.py
msgid "Boxes with flex"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Tray"
msgstr ""
#. title of group Tray
#: boxes/generators/__init__.py
msgid "Trays and Drawer Inserts"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Shelf"
msgstr ""
#. title of group Shelf
#: boxes/generators/__init__.py
msgid "Shelves"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "WallMounted"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Holes"
msgstr ""
#. title of group Holes
#: boxes/generators/__init__.py
msgid "Hole patterns"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Part"
msgstr ""
#. title of group Part
#: boxes/generators/__init__.py
msgid "Parts and Samples"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Misc"
msgstr ""
#. name of generator group
#: boxes/generators/__init__.py
msgid "Unstable"
msgstr ""
#. description of group Unstable
#: boxes/generators/__init__.py
msgid "Generators are still untested or need manual adjustment to be useful."
msgstr ""
msgid "DefaultParams Settings"
msgstr ""
#. parameter name
msgid "x"
msgstr ""
#. help for parameter x
msgid "inner width in mm (unless outside selected)"
msgstr ""
#. parameter name
msgid "y"
msgstr ""
#. help for parameter y
msgid "inner depth in mm (unless outside selected)"
msgstr ""
#. parameter name
msgid "h"
msgstr ""
#. help for parameter h
msgid "inner height in mm (unless outside selected)"
msgstr ""
#. parameter name
msgid "hi"
msgstr ""
#. help for parameter hi
msgid ""
"inner height of inner walls in mm (unless outside selected)(leave to zero "
"for same as outer walls)"
msgstr ""
#. parameter name
msgid "sx"
msgstr ""
#. help for parameter sx
msgid ""
"sections left to right in mm [🛈](https://florianfesti.github.io/boxes/html/"
"usermanual.html#section-parameters)"
msgstr ""
#. parameter name
msgid "sy"
msgstr ""
#. help for parameter sy
msgid ""
"sections back to front in mm [🛈](https://florianfesti.github.io/boxes/html/"
"usermanual.html#section-parameters)"
msgstr ""
#. parameter name
msgid "sh"
msgstr ""
#. help for parameter sh
msgid ""
"sections bottom to top in mm [🛈](https://florianfesti.github.io/boxes/html/"
"usermanual.html#section-parameters)"
msgstr ""
#. parameter name
msgid "bottom_edge"
msgstr ""
#. help for parameter bottom_edge
msgid "edge type for bottom edge"
msgstr ""
#. possible choice for bottom_edge
msgid "F"
msgstr ""
#. possible choice for bottom_edge
msgid "s"
msgstr ""
#. possible choice for bottom_edge
msgid "e"
msgstr ""
#. parameter name
msgid "top_edge"
msgstr ""
#. help for parameter top_edge
msgid "edge type for top edge"
msgstr ""
#. possible choice for top_edge
msgid "f"
msgstr ""
#. possible choice for top_edge
msgid "c"
msgstr ""
#. possible choice for top_edge
msgid "E"
msgstr ""
#. possible choice for top_edge
msgid "S"
msgstr ""
#. possible choice for top_edge
msgid "Š"
msgstr ""
#. possible choice for top_edge
msgid "i"
msgstr ""
#. possible choice for top_edge
msgid "k"
msgstr ""
#. possible choice for top_edge
msgid "v"
msgstr ""
#. possible choice for top_edge
msgid "L"
msgstr ""
#. possible choice for top_edge
msgid "t"
msgstr ""
#. possible choice for top_edge
msgid "G"
msgstr ""
#. possible choice for top_edge
msgid "Y"
msgstr ""
#. parameter name
msgid "outside"
msgstr ""
#. help for parameter outside
msgid ""
"treat sizes as outside measurements [🛈](https://florianfesti.github.io/boxes/"
"html/usermanual.html#outside)"
msgstr ""
#. parameter name
msgid "nema_mount"
msgstr ""
#. help for parameter nema_mount
msgid "NEMA size of motor"
msgstr ""
msgid "Default Settings"
msgstr ""
#. parameter name
msgid "thickness"
msgstr ""
#. help for parameter thickness
msgid ""
"thickness of the material (in mm) [🛈](https://florianfesti.github.io/boxes/"
"html/usermanual.html#thickness)"
msgstr ""
#. parameter name
msgid "format"
msgstr ""
#. help for parameter format
msgid ""
"format of resulting file [🛈](https://florianfesti.github.io/boxes/html/"
"usermanual.html#format)"
msgstr ""
#. possible choice for format
msgid "ai"
msgstr ""
#. possible choice for format
msgid "dxf"
msgstr ""
#. possible choice for format
msgid "gcode"
msgstr ""
#. possible choice for format
msgid "lbrn2"
msgstr ""
#. possible choice for format
msgid "pdf"
msgstr ""
#. possible choice for format
msgid "plt"
msgstr ""
#. possible choice for format
msgid "ps"
msgstr ""
#. possible choice for format
msgid "svg"
msgstr ""
#. possible choice for format
msgid "svg_Ponoko"
msgstr ""
#. parameter name
msgid "tabs"
msgstr ""
#. help for parameter tabs
msgid ""
"width of tabs holding the parts in place (in mm)(not supported everywhere) "
"[🛈](https://florianfesti.github.io/boxes/html/usermanual.html#tabs)"
msgstr ""
#. parameter name
msgid "debug"
msgstr ""
#. help for parameter debug
msgid ""
"print surrounding boxes for some structures [🛈](https://florianfesti.github."
"io/boxes/html/usermanual.html#debug)"
msgstr ""
#. parameter name
msgid "labels"
msgstr ""
#. help for parameter labels
msgid "label the parts (where available)"
msgstr ""
#. parameter name
msgid "reference"
msgstr ""
#. help for parameter reference
msgid ""
"print reference rectangle with given length (in mm)(zero to disable) [🛈]"
"(https://florianfesti.github.io/boxes/html/usermanual.html#reference)"
msgstr ""
#. parameter name
msgid "inner_corners"
msgstr ""
#. help for parameter inner_corners
msgid ""
"style for inner corners [🛈](https://florianfesti.github.io/boxes/html/"
"usermanual.html#inner-corners)"
msgstr ""
#. possible choice for inner_corners
msgid "loop"
msgstr ""
#. possible choice for inner_corners
msgid "corner"
msgstr ""
#. possible choice for inner_corners
msgid "backarc"
msgstr ""
#. parameter name
msgid "burn"
msgstr ""
#. help for parameter burn
msgid ""
"burn correction (in mm)(bigger values for tighter fit) [🛈](https://"
"florianfesti.github.io/boxes/html/usermanual.html#burn)"
msgstr ""
msgid "Settings for Finger Joints"
msgstr ""
#. parameter name for FingerJoint
msgid "angle"
msgstr ""
#. parameter name for FingerJoint
msgid "style"
msgstr ""
#. help for parameter style
msgid "style of the fingers"
msgstr ""
#. possible choice for style
msgid "rectangular"
msgstr ""
#. possible choice for style
msgid "springs"
msgstr ""
#. possible choice for style
msgid "barbs"
msgstr ""
#. possible choice for style
msgid "snap"
msgstr ""
#. parameter name for FingerJoint
msgid "surroundingspaces"
msgstr ""
#. help for parameter surroundingspaces
msgid "space at the start and end in multiple of normal spaces"
msgstr ""
#. parameter name for FingerJoint
msgid "bottom_lip"
msgstr ""
#. help for parameter bottom_lip
msgid ""
"height of the bottom lips sticking out (multiples of thickness) "
"FingerHoleEdge only!"
msgstr ""
#. parameter name for FingerJoint
msgid "edge_width"
msgstr ""
#. help for parameter edge_width
msgid "space below holes of FingerHoleEdge (multiples of thickness)"
msgstr ""
#. parameter name for FingerJoint
msgid "extra_length"
msgstr ""
#. help for parameter extra_length
msgid "extra material to grind away burn marks (multiples of thickness)"
msgstr ""
#. parameter name for FingerJoint
msgid "finger"
msgstr ""
#. help for parameter finger
msgid "width of the fingers (multiples of thickness)"
msgstr ""
#. parameter name for FingerJoint
msgid "play"
msgstr ""
#. help for parameter play
msgid "extra space to allow finger move in and out (multiples of thickness)"
msgstr ""
#. parameter name for FingerJoint
msgid "space"
msgstr ""
#. help for parameter space
msgid "space between fingers (multiples of thickness)"
msgstr ""
#. parameter name for FingerJoint
msgid "width"
msgstr ""
#. help for parameter width
msgid "width of finger holes (multiples of thickness)"
msgstr ""
msgid "Settings for Stackable Edges"
msgstr ""
#. help for parameter angle
msgid "inside angle of the feet"
msgstr ""
#. parameter name for Stackable
msgid "bottom_stabilizers"
msgstr ""
#. help for parameter bottom_stabilizers
msgid ""
"height of strips to be glued to the inside of bottom edges (multiples of "
"thickness)"
msgstr ""
#. parameter name for Stackable
msgid "height"
msgstr ""
#. help for parameter height
msgid "height of the feet (multiples of thickness)"
msgstr ""
#. parameter name for Stackable
msgid "holedistance"
msgstr ""
#. help for parameter holedistance
msgid "distance from finger holes to bottom edge (multiples of thickness)"
msgstr ""
#. help for parameter width
msgid "width of the feet (multiples of thickness)"
msgstr ""
msgid "Settings for Hinges and HingePins"
msgstr ""
#. parameter name for Hinge
msgid "grip_percentage"
msgstr ""
#. parameter name for Hinge
msgid "outset"
msgstr ""
#. help for parameter outset
msgid "have lid overlap at the sides (similar to OutSetEdge)"
msgstr ""
#. parameter name for Hinge
msgid "pinwidth"
msgstr ""
#. help for parameter pinwidth
msgid "set to lower value to get disks surrounding the pins"
msgstr ""
#. help for parameter style
msgid "\"outset\" or \"flush\""
msgstr ""
#. possible choice for style
msgid "flush"
msgstr ""
#. parameter name for Hinge
msgid "axle"
msgstr ""
#. help for parameter axle
msgid "diameter of the pin hole (multiples of thickness)"
msgstr ""
#. parameter name for Hinge
msgid "grip_length"
msgstr ""
#. help for parameter grip_length
msgid "fixed length of the grips on he lids (multiples of thickness)"
msgstr ""
#. parameter name for Hinge
msgid "hingestrength"
msgstr ""
#. help for parameter hingestrength
msgid "thickness of the arc holding the pin in place (multiples of thickness)"
msgstr ""
msgid "Settings for Slide-on Lids"
msgstr ""
#. parameter name for Lid
msgid "hole_width"
msgstr ""
#. help for parameter hole_width
msgid "width of the \"finger hole\" in mm"
msgstr ""
#. parameter name for Lid
msgid "second_pin"
msgstr ""
#. help for parameter second_pin
msgid "additional pin for better positioning"
msgstr ""
#. parameter name for Lid
msgid "spring"
msgstr ""
#. help for parameter spring
msgid "position(s) of the extra locking springs in the lid"
msgstr ""
#. possible choice for spring
msgid "both"
msgstr ""
#. possible choice for spring
msgid "none"
msgstr ""
#. possible choice for spring
msgid "left"
msgstr ""
#. possible choice for spring
msgid "right"
msgstr ""
msgid "Settings for Click-on Lids"
msgstr ""
#. help for parameter angle
msgid "angle of the hooks bending outward"
msgstr ""
#. parameter name for Click
msgid "bottom_radius"
msgstr ""
#. help for parameter bottom_radius
msgid "radius at the bottom (multiples of thickness)"
msgstr ""
#. parameter name for Click
msgid "depth"
msgstr ""
#. help for parameter depth
msgid "length of the hooks (multiples of thickness)"
msgstr ""
msgid "Settings for Flex"
msgstr ""
#. parameter name for Flex
msgid "stretch"
msgstr ""
#. help for parameter stretch
msgid "Hint of how much the flex part should be shortened"
msgstr ""
#. parameter name for Flex
msgid "connection"
msgstr ""
#. help for parameter connection
msgid "width of the gaps in the cuts (multiples of thickness)"
msgstr ""
#. parameter name for Flex
msgid "distance"
msgstr ""
#. help for parameter distance
msgid "width of the pattern perpendicular to the cuts (multiples of thickness)"
msgstr ""
#. help for parameter width
msgid "width of the pattern in direction of the cuts (multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/abox.py
msgid "ABox"
msgstr ""
#. description of ABox
#: boxes/generators/abox.py
msgid "A simple Box"
msgstr ""
#. long description of ABox in markdown
#: boxes/generators/abox.py
msgid ""
"This box is kept simple on purpose. If you need more features have a look at "
"the UniversalBox."
msgstr ""
msgid "ABox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/agricolainsert.py
msgid "AgricolaInsert"
msgstr ""
#. description of AgricolaInsert
#: boxes/generators/agricolainsert.py
msgid ""
"\n"
" Agricola Revised Edition game box insert, including some expansions.\n"
" "
msgstr ""
#. long description of AgricolaInsert in markdown
#: boxes/generators/agricolainsert.py
msgid ""
"\n"
"This insert was designed with 3 mm plywood in mind, and should work fine "
"with\n"
"materials around this thickness.\n"
"\n"
"This is an insert for the [Agricola Revised Edition](https://boardgamegeek."
"com/boardgame/200680/agricola-revised-edition)\n"
"board game. It is specifically designed around the [Farmers Of The Moor "
"expansion](https://boardgamegeek.com/boardgameexpansion/257344/agricola-"
"farmers-moor),\n"
"and should also store the [5-6 players expansion](https://boardgamegeek.com/"
"boardgameexpansion/210625/agricola-expansion-5-and-6-players)\n"
"(not tested, but I tried to take everything into account for it, please "
"inform\n"
"us if you tested it).\n"
"\n"
"It can be stored inside the original game box, including the 2 expansions,\n"
"with the lid slightly raised.\n"
"\n"
"The parts of a given element are mostly generated next to each other "
"vertically.\n"
"It should be straightforward to match them.\n"
"\n"
"Here are the different elements, from left to right in the generated file.\n"
"\n"
"#### Card tray\n"
"\n"
"The cards are all kept in a tray, with paper dividers to sort them easily. "
"When\n"
"the tray is not full of cards, wood dividers slides in slots in order to "
"keep\n"
"the cards from falling into the empty space.\n"
"\n"
"There should be enough space for the main game, Farmers Of The Moor, and the "
"5-6\n"
"player expansion, but not much more than that.\n"
"\n"
"To keep a lower profile, the cards are at a slight angle, and the paper "
"dividers\n"
"tabs are horizontal instead of vertical.\n"
"A small wall keeps the card against one side while the tabs protrude on the\n"
"other side, above the small wall.\n"
"\n"
"The wall with the big hole is the sloped one. It goes between the two\n"
"\"comb-like\" walls first, with its two small holes at the bottom. Then "
"there is a\n"
"low-height long wall with a sloped edge which should go from the sloped wall "
"to\n"
"the other side. You can finish the tray with the last wall at the end.\n"
"\n"
"#### Upper level trays\n"
"\n"
"4 trays with movable walls are used to store resources. They were designed "
"to\n"
"store them in this order:\n"
"\n"
"* Stone / Vegetable / Pig / Cow\n"
"* Reed / Grain / Sheep\n"
"* Wood / Clay\n"
"* Food / Fire\n"
"\n"
"The wall would probably be better if fixed instead of movable, but I would "
"like\n"
"to test with the 5-6 player expansion to be sure their positions are "
"correct\n"
"with it too.\n"
"\n"
"The little feet of the movable wall should be glued. The triangles are put\n"
"horizontally, with their bases towards the sides.\n"
"\n"
"#### Lower level tray\n"
"\n"
"The lower level tray is used to store the horses.\n"
"\n"
"#### Room/Field tiles\n"
"\n"
"Two boxes are generated to store the room/field tiles. One for the wood/"
"field,\n"
"the other for the clay/stone. They are stored with the main opening upside, "
"but\n"
"I prefer to use them during play with this face on the side.\n"
"\n"
"#### Moor/Forest and miscellaneous tiles\n"
"\n"
"A box is generated to store the Moor/Forest tiles, and some other tiles such "
"as\n"
"the \"multiple resources\" cardboard tokens.\n"
"\n"
"The Moor/Forest tiles are at the same height as the Room/Field, and the "
"upper\n"
"level trays are directly on them. The horse box and player box are slightly\n"
"lower. This Moor/Forest box have a lowered corner (the one for the "
"miscellaneous\n"
"tiles). Two cardboard pieces can be stored between the smaller boxes and "
"the\n"
"upper level trays (as seen on the picture).\n"
"\n"
"Be sure to match the pieces so that the walls with smaller heights are next "
"to\n"
"each other.\n"
"\n"
"#### Players bit boxes\n"
"\n"
"Each player has its own box where the bits of his color are stored.\n"
"The cardboard bed from Farmers Of The Moor is central to this box.\n"
"\n"
"* The fences are stored inside the bed\n"
"* The bed is placed in the box, with holes to keep it there (and to take "
"less\n"
" height)\n"
"* The stables are stored in the two corners\n"
"* The five farmers are stored between the bed and the three walls, "
"alternatively\n"
" head up and head down.\n"
"\n"
"During assembly, the small bars are put in the middle holes. The two bigger\n"
"holes at the ends are used for the bed feet. The bar keeps the bed from\n"
"protruding underneath.\n"
"\n"
msgstr ""
msgid "AgricolaInsert Settings"
msgstr ""
#. name of box generator
#: boxes/generators/alledges.py
msgid "AllEdges"
msgstr ""
#. description of AllEdges
#: boxes/generators/alledges.py
msgid "Showing all edge types"
msgstr ""
msgid "AllEdges Settings"
msgstr ""
#. help for parameter x
#: boxes/generators/alledges.py
msgid "inner width in mm"
msgstr ""
msgid "Settings for HandleEdge"
msgstr ""
#. help for parameter height
#: boxes/generators/alledges.py
msgid "height above the wall in mm"
msgstr ""
#. parameter name for HandleEdge
#: boxes/generators/alledges.py
msgid "hole_height"
msgstr ""
#. help for parameter hole_height
#: boxes/generators/alledges.py
msgid ""
"height of hole(s) in percentage of maximum hole height (handle height - 2 * "
"material thickness)"
msgstr ""
#. help for parameter hole_width
#: boxes/generators/alledges.py
msgid ""
"width of hole(s) in percentage of maximum hole width (width of edge - (n+1) "
"* material thickness)"
msgstr ""
#. parameter name for HandleEdge
#: boxes/generators/alledges.py
msgid "on_sides"
msgstr ""
#. help for parameter on_sides
#: boxes/generators/alledges.py
msgid ""
"added to side panels if checked, to front and back otherwise (only used with "
"top_edge parameter)"
msgstr ""
#. parameter name for HandleEdge
#: boxes/generators/alledges.py
msgid "radius"
msgstr ""
#. help for parameter radius
#: boxes/generators/alledges.py
msgid "radius of corners in mm"
msgstr ""
#. help for parameter outset
#: boxes/generators/alledges.py
msgid "extend the handle along the length of the edge (multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/angledbox.py
msgid "AngledBox"
msgstr ""
#. description of AngledBox
#: boxes/generators/angledbox.py
msgid "Box with both ends cornered"
msgstr ""
msgid "AngledBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/angledbox.py
msgid "n"
msgstr ""
#. help for parameter n
#: boxes/generators/angledbox.py
msgid "number of walls at one side (1+)"
msgstr ""
#. parameter name
#: boxes/generators/angledbox.py
msgid "top"
msgstr ""
#. help for parameter top
#: boxes/generators/angledbox.py
msgid "style of the top and lid"
msgstr ""
#. possible choice for top
#: boxes/generators/angledbox.py
msgid "angled hole"
msgstr ""
#. possible choice for top
#: boxes/generators/angledbox.py
msgid "angled lid"
msgstr ""
#. possible choice for top
#: boxes/generators/angledbox.py
msgid "angled lid2"
msgstr ""
#. name of box generator
#: boxes/generators/angledcutjig.py
msgid "AngledCutJig"
msgstr ""
#. description of AngledCutJig
#: boxes/generators/angledcutjig.py
msgid "Jig for making angled cuts in a laser cutter"
msgstr ""
msgid "AngledCutJig Settings"
msgstr ""
#. help for parameter y
#: boxes/generators/angledcutjig.py
msgid "inner depth in mm"
msgstr ""
#. help for parameter angle
#: boxes/generators/angledcutjig.py
msgid "Angle of the cut"
msgstr ""
#. name of box generator
#: boxes/generators/arcade.py
msgid "Arcade"
msgstr ""
#. description of Arcade
#: boxes/generators/arcade.py
msgid "Desktop Arcade Machine"
msgstr ""
msgid "Arcade Settings"
msgstr ""
#. help for parameter width
#: boxes/generators/arcade.py
msgid "inner width of the console"
msgstr ""
#. parameter name
#: boxes/generators/arcade.py
msgid "monitor_height"
msgstr ""
#. parameter name
#: boxes/generators/arcade.py
msgid "keyboard_depth"
msgstr ""
#. name of box generator
#: boxes/generators/atreus21.py
msgid "Atreus21"
msgstr ""
#. description of Atreus21
#: boxes/generators/atreus21.py
msgid "Generator for a split atreus keyboard."
msgstr ""
msgid "Atreus21 Settings"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "hotswap_enable"
msgstr ""
#. help for parameter hotswap_enable
#: boxes/generators/atreus21.py
msgid "enlarge switches holes for hotswap pcb sockets"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "pcb_mount_enable"
msgstr ""
#. help for parameter pcb_mount_enable
#: boxes/generators/atreus21.py
msgid "adds holes for pcb mount switches"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "led_enable"
msgstr ""
#. help for parameter led_enable
#: boxes/generators/atreus21.py
msgid "adds pin holes under switches for leds"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "diode_enable"
msgstr ""
#. help for parameter diode_enable
#: boxes/generators/atreus21.py
msgid "adds pin holes under switches for diodes"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "cutout_type"
msgstr ""
#. help for parameter cutout_type
#: boxes/generators/atreus21.py
msgid ""
"Shape of the plate cutout: 'castle' allows for modding, and 'simple' is a "
"tighter and simpler square"
msgstr ""
#. parameter name
#: boxes/generators/atreus21.py
msgid "columns_definition"
msgstr ""
#. help for parameter columns_definition
#: boxes/generators/atreus21.py
msgid ""
"Each column is separated by '/', and is in the form 'nb_rows @ offset x "
"repeat_count'. Nb_rows is the number of rows for this column. The offset is "
"in mm and optional. Repeat_count is optional and repeats this column "
"multiple times. Spaces are not important.For example '3x2 / 4@11' means we "
"want 3 columns, the two first with 3 rows without offset, and the last with "
"4 rows starting at 11mm high."
msgstr ""
#. name of box generator
#: boxes/generators/basedbox.py
msgid "BasedBox"
msgstr ""
#. description of BasedBox
#: boxes/generators/basedbox.py
msgid "Fully closed box on a base"
msgstr ""
#. long description of BasedBox in markdown
#: boxes/generators/basedbox.py
msgid ""
"This box is more of a building block than a finished item.\n"
"Use a vector graphics program (like Inkscape) to add holes or adjust the "
"base\n"
"plate. The width of the \"brim\" can also be adjusted with the "
"**edge_width**\n"
" parameter in the **Finger Joints Settings**.\n"
" \n"
"See ClosedBox for variant without a base.\n"
msgstr ""
msgid "BasedBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/bayonetbox.py
msgid "BayonetBox"
msgstr ""
#. description of BayonetBox
#: boxes/generators/bayonetbox.py
msgid "Round box made from layers with twist on top"
msgstr ""
#. long description of BayonetBox in markdown
#: boxes/generators/bayonetbox.py
msgid ""
"Glue together - all outside rings to the bottom, all inside rings to the top."
msgstr ""
msgid "BayonetBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/bayonetbox.py
msgid "diameter"
msgstr ""
#. help for parameter diameter
#: boxes/generators/bayonetbox.py
msgid "Diameter of the box in mm"
msgstr ""
#. parameter name
#: boxes/generators/bayonetbox.py
msgid "lugs"
msgstr ""
#. help for parameter lugs
#: boxes/generators/bayonetbox.py
msgid "number of locking lugs"
msgstr ""
#. parameter name
#: boxes/generators/bayonetbox.py
msgid "alignment_pins"
msgstr ""
#. help for parameter alignment_pins
#: boxes/generators/bayonetbox.py
msgid "diameter of the alignment pins"
msgstr ""
#. name of box generator
#: boxes/generators/bintray.py
msgid "BinTray"
msgstr ""
#. description of BinTray
#: boxes/generators/bintray.py
msgid "A Type tray variant to be used up right with sloped walls in front"
msgstr ""
msgid "BinTray Settings"
msgstr ""
#. parameter name
#: boxes/generators/bintray.py
msgid "hole_dD"
msgstr ""
#. help for parameter hole_dD
#: boxes/generators/bintray.py
msgid ""
"mounting hole diameter (shaft:head) in mm [🛈](https://florianfesti.github.io/"
"boxes/html/usermanual.html#mounting-holes)"
msgstr ""
#. parameter name
#: boxes/generators/bintray.py
msgid "front"
msgstr ""
#. help for parameter front
#: boxes/generators/bintray.py
msgid "fraction of bin height covert with slope"
msgstr ""
#. name of box generator
#: boxes/generators/birdhouse.py
msgid "BirdHouse"
msgstr ""
#. description of BirdHouse
#: boxes/generators/birdhouse.py
msgid "Simple Bird House"
msgstr ""
msgid "BirdHouse Settings"
msgstr ""
#. help for parameter h
#: boxes/generators/birdhouse.py
msgid "inner height in mm"
msgstr ""
#. name of box generator
#: boxes/generators/bottlestack.py
msgid "BottleStack"
msgstr ""
#. description of BottleStack
#: boxes/generators/bottlestack.py
msgid "Stack bottles in a fridge"
msgstr ""
#. long description of BottleStack in markdown
#: boxes/generators/bottlestack.py
msgid ""
"When rendered with the \"double\" option the parts with the double slots get "
"connected the shorter beams in the asymmetrical slots.\n"
"\n"
"Without the \"double\" option the stand is a bit more narrow.\n"
msgstr ""
msgid "BottleStack Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/bottlestack.py
msgid "diameter of the bottles in mm"
msgstr ""
#. parameter name
#: boxes/generators/bottlestack.py
msgid "number"
msgstr ""
#. help for parameter number
#: boxes/generators/bottlestack.py
msgid "number of bottles to hold in the bottom row"
msgstr ""
#. help for parameter depth
#: boxes/generators/bottlestack.py
msgid "depth of the stand along the base of the bottles"
msgstr ""
#. parameter name
#: boxes/generators/bottlestack.py
msgid "double"
msgstr ""
#. help for parameter double
#: boxes/generators/bottlestack.py
msgid "two pieces that can be combined to up to double the width"
msgstr ""
#. name of box generator
#: boxes/generators/bottletag.py
msgid "BottleTag"
msgstr ""
#. description of BottleTag
#: boxes/generators/bottletag.py
msgid "Paper slip over bottle tag"
msgstr ""
msgid "BottleTag Settings"
msgstr ""
#. help for parameter width
#: boxes/generators/bottletag.py
msgid "width of neck tag"
msgstr ""
#. help for parameter height
#: boxes/generators/bottletag.py
msgid "height of neck tag"
msgstr ""
#. parameter name
#: boxes/generators/bottletag.py
msgid "min_diameter"
msgstr ""
#. help for parameter min_diameter
#: boxes/generators/bottletag.py
msgid "inner diameter of bottle neck hole"
msgstr ""
#. parameter name
#: boxes/generators/bottletag.py
msgid "max_diameter"
msgstr ""
#. help for parameter max_diameter
#: boxes/generators/bottletag.py
msgid "outer diameter of bottle neck hole"
msgstr ""
#. help for parameter radius
#: boxes/generators/bottletag.py
msgid "corner radius of bottom tag"
msgstr ""
#. parameter name
#: boxes/generators/bottletag.py
msgid "segment_width"
msgstr ""
#. help for parameter segment_width
#: boxes/generators/bottletag.py
msgid "inner segment width"
msgstr ""
#. name of box generator
#: boxes/generators/breadbox.py
msgid "BreadBox"
msgstr ""
#. description of BreadBox
#: boxes/generators/breadbox.py
msgid "A BreadBox with a gliding door"
msgstr ""
#. long description of BreadBox in markdown
#: boxes/generators/breadbox.py
msgid "Beware of the rolling shutter effect! Use wax on sliding surfaces.\n"
msgstr ""
msgid "BreadBox Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/breadbox.py
msgid "radius of the corners"
msgstr ""
#. name of box generator
#: boxes/generators/burntest.py
msgid "BurnTest"
msgstr ""
#. description of BurnTest
#: boxes/generators/burntest.py
msgid "Test different burn values"
msgstr ""
#. long description of BurnTest in markdown
#: boxes/generators/burntest.py
msgid ""
"This generator will make shapes that you can use to select\n"
"optimal value for burn parameter for other generators. After burning try to\n"
"attach sides with the same value and use best fitting one on real projects.\n"
"In this generator set burn in the Default Settings to the lowest value\n"
"to be tested. To get an idea cut a rectangle with known nominal size and\n"
"measure the shrinkage due to the width of the laser cut. Now you can\n"
"measure the burn value that you should use in other generators. It is half\n"
"the difference of the overall size as shrinkage is occurring on both\n"
"sides. You can use the reference rectangle as it is rendered without burn\n"
"correction.\n"
"\n"
"See also LBeam that can serve as compact BurnTest and FlexTest for testing "
"flex settings.\n"
msgstr ""
msgid "BurnTest Settings"
msgstr ""
#. parameter name
#: boxes/generators/burntest.py
msgid "step"
msgstr ""
#. help for parameter step
#: boxes/generators/burntest.py
msgid "increases in burn value between the sides"
msgstr ""
#. parameter name
#: boxes/generators/burntest.py
msgid "pairs"
msgstr ""
#. help for parameter pairs
#: boxes/generators/burntest.py
msgid "number of pairs (each testing four burn values)"
msgstr ""
#. name of box generator
#: boxes/generators/can_storage.py
msgid "CanStorage"
msgstr ""
#. description of CanStorage
#: boxes/generators/can_storage.py
msgid "Storage box for round containers"
msgstr ""
#. long description of CanStorage in markdown
#: boxes/generators/can_storage.py
msgid ""
"\n"
"for AA batteries:\n"
"\n"
"![CanStorage for AA batteries](static/samples/CanStorageAA.jpg)\n"
"\n"
"for canned tomatoes:\n"
msgstr ""
msgid "CanStorage Settings"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/can_storage.py
msgid "š"
msgstr ""
#. parameter name
#: boxes/generators/can_storage.py
msgid "canDiameter"
msgstr ""
#. help for parameter canDiameter
#: boxes/generators/can_storage.py
msgid "outer diameter of the cans to be stored (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/can_storage.py
msgid "canHeight"
msgstr ""
#. help for parameter canHeight
#: boxes/generators/can_storage.py
msgid "height of the cans to be stored (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/can_storage.py
msgid "canNum"
msgstr ""
#. help for parameter canNum
#: boxes/generators/can_storage.py
msgid "number of cans to be stored"
msgstr ""
#. parameter name
#: boxes/generators/can_storage.py
msgid "chuteAngle"
msgstr ""
#. help for parameter chuteAngle
#: boxes/generators/can_storage.py
msgid "slope angle of the chutes"
msgstr ""
msgid "Settings for Hole filling"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "bar_length"
msgstr ""
#. help for parameter bar_length
#: boxes/generators/can_storage.py
msgid "maximum length of bars"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "fill_pattern"
msgstr ""
#. help for parameter fill_pattern
#: boxes/generators/can_storage.py
msgid "style of hole pattern"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "no fill"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "hex"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "square"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "random"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "hbar"
msgstr ""
#. possible choice for fill_pattern
#: boxes/generators/can_storage.py
msgid "vbar"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "hole_max_radius"
msgstr ""
#. help for parameter hole_max_radius
#: boxes/generators/can_storage.py
msgid "maximum radius of generated holes (in mm)"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "hole_min_radius"
msgstr ""
#. help for parameter hole_min_radius
#: boxes/generators/can_storage.py
msgid "minimum radius of generated holes (in mm)"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "hole_style"
msgstr ""
#. help for parameter hole_style
#: boxes/generators/can_storage.py
msgid "style of holes (does not apply to fill patterns 'vbar' and 'hbar')"
msgstr ""
#. possible choice for hole_style
#: boxes/generators/can_storage.py
msgid "round"
msgstr ""
#. possible choice for hole_style
#: boxes/generators/can_storage.py
msgid "triangle"
msgstr ""
#. possible choice for hole_style
#: boxes/generators/can_storage.py
msgid "hexagon"
msgstr ""
#. possible choice for hole_style
#: boxes/generators/can_storage.py
msgid "octagon"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "max_random"
msgstr ""
#. help for parameter max_random
#: boxes/generators/can_storage.py
msgid "maximum number of random holes"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "space_between_holes"
msgstr ""
#. help for parameter space_between_holes
#: boxes/generators/can_storage.py
msgid "hole to hole spacing (in mm)"
msgstr ""
#. parameter name for fillHoles
#: boxes/generators/can_storage.py
msgid "space_to_border"
msgstr ""
#. help for parameter space_to_border
#: boxes/generators/can_storage.py
msgid "hole to border spacing (in mm)"
msgstr ""
#. name of box generator
#: boxes/generators/cardbox.py
msgid "CardBox"
msgstr ""
#. description of CardBox
#: boxes/generators/cardbox.py
msgid "Box for storage of playing cards"
msgstr ""
#. long description of CardBox in markdown
#: boxes/generators/cardbox.py
msgid ""
"\n"
"#### Building instructions\n"
"\n"
"Place inner walls on floor first (if any). Then add the outer walls. Glue "
"the two walls without finger joins to the inside of the side walls. Make "
"sure there is no squeeze out on top, as this is going to form the rail for "
"the lid.\n"
"\n"
"Add the top of the rails to the sides and the grip rail to the lid.\n"
"\n"
"Details of the lid and rails\n"
"\n"
"![Details](static/samples/CardBox-detail.jpg)\n"
"\n"
"Whole box (early version still missing grip rail on the lid):\n"
msgstr ""
msgid "CardBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/cardbox.py
msgid "cardwidth"
msgstr ""
#. help for parameter cardwidth
#: boxes/generators/cardbox.py
msgid "Width of the cards"
msgstr ""
#. parameter name
#: boxes/generators/cardbox.py
msgid "cardheight"
msgstr ""
#. help for parameter cardheight
#: boxes/generators/cardbox.py
msgid "Height of the cards"
msgstr ""
#. parameter name
#: boxes/generators/cardbox.py
msgid "num"
msgstr ""
#. help for parameter num
#: boxes/generators/cardbox.py
msgid "number of compartments"
msgstr ""
#. name of box generator
#: boxes/generators/cardholder.py
msgid "CardHolder"
msgstr ""
#. description of CardHolder
#: boxes/generators/cardholder.py
msgid "Shelf for holding (multiple) piles of playing cards / notes"
msgstr ""
msgid "CardHolder Settings"
msgstr ""
#. help for parameter angle
#: boxes/generators/cardholder.py
msgid "backward angle of floor"
msgstr ""
#. parameter name
#: boxes/generators/cardholder.py
msgid "stackable"
msgstr ""
#. help for parameter stackable
#: boxes/generators/cardholder.py
msgid "make holders stackable"
msgstr ""
msgid "Settings for Grooved Edge"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "arc_angle"
msgstr ""
#. help for parameter arc_angle
#: boxes/generators/cardholder.py
msgid "the angle of arc cuts"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "gap"
msgstr ""
#. help for parameter gap
#: boxes/generators/cardholder.py
msgid "the gap between grooves (fraction of the edge length)"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "interleave"
msgstr ""
#. help for parameter interleave
#: boxes/generators/cardholder.py
msgid "alternate the direction of grooves"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "inverse"
msgstr ""
#. help for parameter inverse
#: boxes/generators/cardholder.py
msgid "invert the groove directions"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "margin"
msgstr ""
#. help for parameter margin
#: boxes/generators/cardholder.py
msgid ""
"minimum space left and right without grooves (fraction of the edge length)"
msgstr ""
#. help for parameter style
#: boxes/generators/cardholder.py
msgid "the style of grooves"
msgstr ""
#. possible choice for style
#: boxes/generators/cardholder.py
msgid "arc"
msgstr ""
#. possible choice for style
#: boxes/generators/cardholder.py
msgid "flat"
msgstr ""
#. possible choice for style
#: boxes/generators/cardholder.py
msgid "softarc"
msgstr ""
#. parameter name for Grooved
#: boxes/generators/cardholder.py
msgid "tri_angle"
msgstr ""
#. help for parameter tri_angle
#: boxes/generators/cardholder.py
msgid "the angle of triangular cuts"
msgstr ""
#. help for parameter width
#: boxes/generators/cardholder.py
msgid "the width of each groove (fraction of the edge length)"
msgstr ""
#. name of box generator
#: boxes/generators/castle.py
msgid "Castle"
msgstr ""
#. description of Castle
#: boxes/generators/castle.py
msgid "Castle tower with two walls"
msgstr ""
#. long description of Castle in markdown
#: boxes/generators/castle.py
msgid ""
"This was done as a table decoration. May be at some point in the future "
"someone will create a proper castle\n"
"with towers and gates and walls that can be attached in multiple "
"configurations."
msgstr ""
msgid "Castle Settings"
msgstr ""
#. name of box generator
#: boxes/generators/closedbox.py
msgid "ClosedBox"
msgstr ""
#. description of ClosedBox
#: boxes/generators/closedbox.py
msgid "Fully closed box"
msgstr ""
#. long description of ClosedBox in markdown
#: boxes/generators/closedbox.py
msgid ""
"This box is more of a building block than a finished item.\n"
"Use a vector graphics program (like Inkscape) to add holes or adjust the "
"base\n"
"plate.\n"
"\n"
"See BasedBox for variant with a base."
msgstr ""
msgid "ClosedBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/coffeecapsulesholder.py
msgid "CoffeeCapsuleHolder"
msgstr ""
#. description of CoffeeCapsuleHolder
#: boxes/generators/coffeecapsulesholder.py
msgid ""
"\n"
" Coffee capsule holder\n"
" "
msgstr ""
#. long description of CoffeeCapsuleHolder in markdown
#: boxes/generators/coffeecapsulesholder.py
msgid ""
"\n"
" You can store your coffee capsule near your espresso machine with this. "
"It works both vertically, or upside down under a shelf.\n"
msgstr ""
msgid "CoffeeCapsuleHolder Settings"
msgstr ""
#. parameter name
#: boxes/generators/coffeecapsulesholder.py
msgid "columns"
msgstr ""
#. help for parameter columns
#: boxes/generators/coffeecapsulesholder.py
msgid "Number of columns of capsules."
msgstr ""
#. parameter name
#: boxes/generators/coffeecapsulesholder.py
msgid "rows"
msgstr ""
#. help for parameter rows
#: boxes/generators/coffeecapsulesholder.py
msgid "Number of capsules by columns."
msgstr ""
#. parameter name
#: boxes/generators/coffeecapsulesholder.py
msgid "backplate"
msgstr ""
#. help for parameter backplate
#: boxes/generators/coffeecapsulesholder.py
msgid "True if a backplate should be generated."
msgstr ""
#. name of box generator
#: boxes/generators/coindisplay.py
msgid "CoinDisplay"
msgstr ""
#. description of CoinDisplay
#: boxes/generators/coindisplay.py
msgid "A showcase for a single coin"
msgstr ""
msgid "CoinDisplay Settings"
msgstr ""
#. parameter name
#: boxes/generators/coindisplay.py
msgid "coin_d"
msgstr ""
#. help for parameter coin_d
#: boxes/generators/coindisplay.py
msgid "The diameter of the coin in mm"
msgstr ""
#. parameter name
#: boxes/generators/coindisplay.py
msgid "coin_plate"
msgstr ""
#. help for parameter coin_plate
#: boxes/generators/coindisplay.py
msgid "The size of the coin plate"
msgstr ""
#. parameter name
#: boxes/generators/coindisplay.py
msgid "coin_showcase_h"
msgstr ""
#. help for parameter coin_showcase_h
#: boxes/generators/coindisplay.py
msgid "The height of the coin showcase piece"
msgstr ""
#. help for parameter angle
#: boxes/generators/coindisplay.py
msgid "The angle that the coin will tilt as"
msgstr ""
#. name of box generator
#: boxes/generators/concaveknob.py
msgid "ConcaveKnob"
msgstr ""
#. description of ConcaveKnob
#: boxes/generators/concaveknob.py
msgid "Round knob serrated outside for better gripping"
msgstr ""
msgid "ConcaveKnob Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/concaveknob.py
msgid "Diameter of the knob (mm)"
msgstr ""
#. parameter name
#: boxes/generators/concaveknob.py
msgid "serrations"
msgstr ""
#. help for parameter serrations
#: boxes/generators/concaveknob.py
msgid "Number of serrations"
msgstr ""
#. parameter name
#: boxes/generators/concaveknob.py
msgid "rounded"
msgstr ""
#. help for parameter rounded
#: boxes/generators/concaveknob.py
msgid "Amount of circumference used for non convex parts"
msgstr ""
#. help for parameter angle
#: boxes/generators/concaveknob.py
msgid "Angle between convex and concave parts"
msgstr ""
#. parameter name
#: boxes/generators/concaveknob.py
msgid "bolthole"
msgstr ""
#. help for parameter bolthole
#: boxes/generators/concaveknob.py
msgid "Diameter of the bolt hole (mm)"
msgstr ""
#. parameter name
#: boxes/generators/concaveknob.py
msgid "dhole"
msgstr ""
#. help for parameter dhole
#: boxes/generators/concaveknob.py
msgid "D-Flat in fraction of the diameter"
msgstr ""
#. parameter name
#: boxes/generators/concaveknob.py
msgid "hexhead"
msgstr ""
#. help for parameter hexhead
#: boxes/generators/concaveknob.py
msgid "Width of the hex bolt head (mm)"
msgstr ""
#. name of box generator
#: boxes/generators/console.py
msgid "Console"
msgstr ""
#. description of Console
#: boxes/generators/console.py
msgid "Console with slanted panel"
msgstr ""
msgid "Console Settings"
msgstr ""
#. parameter name
#: boxes/generators/console.py
msgid "front_height"
msgstr ""
#. help for parameter front_height
#: boxes/generators/console.py
msgid "height of the front below the panel (in mm)"
msgstr ""
#. help for parameter angle
#: boxes/generators/console.py
msgid "angle of the front panel (90°=upright)"
msgstr ""
#. name of box generator
#: boxes/generators/console2.py
msgid "Console2"
msgstr ""
#. description of Console2
#: boxes/generators/console2.py
msgid "Console with slanted panel and service hatches"
msgstr ""
#. long description of Console2 in markdown
#: boxes/generators/console2.py
msgid ""
"\n"
"This box is designed as a housing for electronic projects. It has hatches "
"that can be re-opened with simple tools. It intentionally cannot be opened "
"with bare hands - if build with thin enough material.\n"
"\n"
"#### Caution\n"
"There is a chance that the latches of the back wall or the back wall itself "
"interfere with the front panel or it's mounting frame/lips. The generator "
"does not check for this. So depending on the variant chosen you might need "
"to make the box deeper (increase y parameter) or the panel angle steeper "
"(increase angle parameter) until there is enough room.\n"
"\n"
"It's also possible that the frame of the panel interferes with the floor if "
"the hi parameter is too small.\n"
"\n"
"#### Assembly instructions\n"
"The main body is easy to assemble by starting with the floor and then adding "
"the four walls and (if present) the top piece.\n"
"\n"
"If the back wall is removable you need to add the lips and latches. The U-"
"shaped clamps holding the latches in place need to be clued in place without "
"also gluing the latches themselves. Make sure the springs on the latches "
"point inwards and the angled ends point to the side walls as shown here:\n"
"\n"
"![Back wall details](static/samples/Console2-backwall-detail.jpg)\n"
"\n"
"If the panel is removable you need to add the springs with the tabs to the "
"side lips. This photo shows the variant which has the panel glued to the "
"frame:\n"
"\n"
"![Back wall details](static/samples/Console2-panel-detail.jpg)\n"
"\n"
"If space is tight you may consider not gluing the cross pieces in place and "
"remove them after the glue-up. This may prevent the latches of the back wall "
"and the panel from interfering with each other.\n"
"\n"
"The variant using finger joints only has the two side lips without the cross "
"bars.\n"
"\n"
"#### Re-Opening\n"
"\n"
"The latches at the back wall lock in place when closed. To open them they "
"need to be pressed in and can then be moved aside.\n"
"\n"
"To remove the panel you have to press in the four tabs at the side. It is "
"easiest to push them in and then pull the panel up a little bit so the tabs "
"stay in.\n"
msgstr ""
msgid "Console2 Settings"
msgstr ""
#. parameter name
#: boxes/generators/console2.py
msgid "removable_backwall"
msgstr ""
#. help for parameter removable_backwall
#: boxes/generators/console2.py
msgid "have latches at the backwall"
msgstr ""
#. parameter name
#: boxes/generators/console2.py
msgid "removable_panel"
msgstr ""
#. help for parameter removable_panel
#: boxes/generators/console2.py
msgid "The panel is held by tabs and can be removed"
msgstr ""
#. parameter name
#: boxes/generators/console2.py
msgid "glued_panel"
msgstr ""
#. help for parameter glued_panel
#: boxes/generators/console2.py
msgid "the panel is glued and not held by finger joints"
msgstr ""
#. name of box generator
#: boxes/generators/dicebox.py
msgid "DiceBox"
msgstr ""
#. description of DiceBox
#: boxes/generators/dicebox.py
msgid "Box with lid and integraded hinge for storing dice"
msgstr ""
msgid "DiceBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/dicebox.py
msgid "lidheight"
msgstr ""
#. help for parameter lidheight
#: boxes/generators/dicebox.py
msgid "height of lid in mm"
msgstr ""
#. parameter name
#: boxes/generators/dicebox.py
msgid "hex_hole_corner_radius"
msgstr ""
#. help for parameter hex_hole_corner_radius
#: boxes/generators/dicebox.py
msgid "The corner radius of the hexagonal dice holes, in mm"
msgstr ""
#. parameter name
#: boxes/generators/dicebox.py
msgid "magnet_diameter"
msgstr ""
#. help for parameter magnet_diameter
#: boxes/generators/dicebox.py
msgid "The diameter of magnets for holding the box closed, in mm"
msgstr ""
msgid "Settings for Chest Hinges"
msgstr ""
#. parameter name for ChestHinge
#: boxes/generators/dicebox.py
msgid "finger_joints_on_box"
msgstr ""
#. help for parameter finger_joints_on_box
#: boxes/generators/dicebox.py
msgid "whether to include finger joints on the edge with the box"
msgstr ""
#. parameter name for ChestHinge
#: boxes/generators/dicebox.py
msgid "finger_joints_on_lid"
msgstr ""
#. help for parameter finger_joints_on_lid
#: boxes/generators/dicebox.py
msgid "whether to include finger joints on the edge with the lid"
msgstr ""
#. parameter name for ChestHinge
#: boxes/generators/dicebox.py
msgid "hinge_strength"
msgstr ""
#. parameter name for ChestHinge
#: boxes/generators/dicebox.py
msgid "pin_height"
msgstr ""
#. help for parameter pin_height
#: boxes/generators/dicebox.py
msgid "radius of the disc rotating in the hinge (multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/dinrailbox.py
msgid "DinRailBox"
msgstr ""
#. description of DinRailBox
#: boxes/generators/dinrailbox.py
msgid "Box for DIN rail used in electrical junction boxes"
msgstr ""
msgid "DinRailBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/dinrailbox.py
msgid "rail_width"
msgstr ""
#. help for parameter rail_width
#: boxes/generators/dinrailbox.py
msgid "width of the rail (typically 35 or 15mm)"
msgstr ""
#. parameter name
#: boxes/generators/dinrailbox.py
msgid "rail_offset"
msgstr ""
#. help for parameter rail_offset
#: boxes/generators/dinrailbox.py
msgid "offset of the rail from the middle of the box (in mm)"
msgstr ""
#. name of box generator
#: boxes/generators/discrack.py
msgid "DiscRack"
msgstr ""
#. description of DiscRack
#: boxes/generators/discrack.py
msgid "A rack for storing disk-shaped objects vertically next to each other"
msgstr ""
msgid "DiscRack Settings"
msgstr ""
#. parameter name
#: boxes/generators/discrack.py
msgid "disc_diameter"
msgstr ""
#. help for parameter disc_diameter
#: boxes/generators/discrack.py
msgid "Disc diameter in mm"
msgstr ""
#. parameter name
#: boxes/generators/discrack.py
msgid "disc_thickness"
msgstr ""
#. help for parameter disc_thickness
#: boxes/generators/discrack.py
msgid "Thickness of the discs in mm"
msgstr ""
#. parameter name
#: boxes/generators/discrack.py
msgid "lower_factor"
msgstr ""
#. help for parameter lower_factor
#: boxes/generators/discrack.py
msgid "Position of the lower rack grids along the radius"
msgstr ""
#. parameter name
#: boxes/generators/discrack.py
msgid "rear_factor"
msgstr ""
#. help for parameter rear_factor
#: boxes/generators/discrack.py
msgid "Position of the rear rack grids along the radius"
msgstr ""
#. parameter name
#: boxes/generators/discrack.py
msgid "disc_outset"
msgstr ""
#. help for parameter disc_outset
#: boxes/generators/discrack.py
msgid "Additional space kept between the disks and the outbox of the rack"
msgstr ""
#. help for parameter angle
#: boxes/generators/discrack.py
msgid "Backwards slant of the rack"
msgstr ""
#. name of box generator
#: boxes/generators/dispenser.py
msgid "Dispenser"
msgstr ""
#. description of Dispenser
#: boxes/generators/dispenser.py
msgid "Dispenser for stackable (flat) items of same size"
msgstr ""
#. long description of Dispenser in markdown
#: boxes/generators/dispenser.py
msgid ""
"Set *bottomheight* to 0 for a wall mounting variant.\n"
"Please add mounting holes yourself."
msgstr ""
msgid "Dispenser Settings"
msgstr ""
#. parameter name
#: boxes/generators/dispenser.py
msgid "slotheight"
msgstr ""
#. help for parameter slotheight
#: boxes/generators/dispenser.py
msgid "height of the dispenser slot / items (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/dispenser.py
msgid "bottomheight"
msgstr ""
#. help for parameter bottomheight
#: boxes/generators/dispenser.py
msgid "height underneath the dispenser (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/dispenser.py
msgid "sideedges"
msgstr ""
#. help for parameter sideedges
#: boxes/generators/dispenser.py
msgid "edges used for holding the front panels and back"
msgstr ""
#. name of box generator
#: boxes/generators/display.py
msgid "Display"
msgstr ""
#. description of Display
#: boxes/generators/display.py
msgid "Display for flyers or leaflets"
msgstr ""
msgid "Display Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/display.py
msgid "radius of the corners in mm"
msgstr ""
#. help for parameter angle
#: boxes/generators/display.py
msgid "greater zero for top wider as bottom"
msgstr ""
#. name of box generator
#: boxes/generators/displaycase.py
msgid "DisplayCase"
msgstr ""
#. description of DisplayCase
#: boxes/generators/displaycase.py
msgid ""
"Fully closed box intended to be cut from transparent acrylics and to serve "
"as a display case."
msgstr ""
msgid "DisplayCase Settings"
msgstr ""
#. parameter name
#: boxes/generators/displaycase.py
msgid "overhang"
msgstr ""
#. help for parameter overhang
#: boxes/generators/displaycase.py
msgid "overhang for joints in mm"
msgstr ""
#. name of box generator
#: boxes/generators/displayshelf.py
msgid "DisplayShelf"
msgstr ""
#. description of DisplayShelf
#: boxes/generators/displayshelf.py
msgid "Shelf with slanted floors"
msgstr ""
msgid "DisplayShelf Settings"
msgstr ""
#. help for parameter num
#: boxes/generators/displayshelf.py
msgid "number of shelves"
msgstr ""
#. parameter name
#: boxes/generators/displayshelf.py
msgid "front_wall_height"
msgstr ""
#. help for parameter front_wall_height
#: boxes/generators/displayshelf.py
msgid "height of front walls"
msgstr ""
#. help for parameter angle
#: boxes/generators/displayshelf.py
msgid "angle of floors (negative values for slanting backwards)"
msgstr ""
#. parameter name
#: boxes/generators/displayshelf.py
msgid "include_back"
msgstr ""
#. help for parameter include_back
#: boxes/generators/displayshelf.py
msgid "Include panel on the back of the shelf"
msgstr ""
#. parameter name
#: boxes/generators/displayshelf.py
msgid "slope_top"
msgstr ""
#. help for parameter slope_top
#: boxes/generators/displayshelf.py
msgid "Slope the sides and the top by front wall height"
msgstr ""
#. name of box generator
#: boxes/generators/dividertray.py
msgid "DividerTray"
msgstr ""
#. description of DividerTray
#: boxes/generators/dividertray.py
msgid "Divider tray - rows and dividers"
msgstr ""
#. long description of DividerTray in markdown
#: boxes/generators/dividertray.py
msgid ""
"\n"
"Adding '0:' at the start of the sy parameter adds a slot at the very back. "
"Adding ':0' at the end of sy adds a slot meeting the bottom at the very "
"front. This is especially useful if slot angle is set above zero.\n"
"\n"
"There are 4 different sets of dividers rendered:\n"
"\n"
"* With asymmetric tabs so the tabs fit on top of each other\n"
"* With tabs of half wall thickness that can go side by side\n"
"* With tabs of a full wall thickness\n"
"* One single divider spanning across all columns\n"
"\n"
"You will likely need to cut each of the dividers you want multiple times.\n"
msgstr ""
msgid "DividerTray Settings"
msgstr ""
#. parameter name
#: boxes/generators/dividertray.py
msgid "notches_in_wall"
msgstr ""
#. help for parameter notches_in_wall
#: boxes/generators/dividertray.py
msgid "generate the same notches on the walls that are on the dividers"
msgstr ""
#. parameter name
#: boxes/generators/dividertray.py
msgid "left_wall"
msgstr ""
#. help for parameter left_wall
#: boxes/generators/dividertray.py
msgid "generate wall on the left side"
msgstr ""
#. parameter name
#: boxes/generators/dividertray.py
msgid "right_wall"
msgstr ""
#. help for parameter right_wall
#: boxes/generators/dividertray.py
msgid "generate wall on the right side"
msgstr ""
#. parameter name
#: boxes/generators/dividertray.py
msgid "bottom"
msgstr ""
#. help for parameter bottom
#: boxes/generators/dividertray.py
msgid "generate wall on the bottom"
msgstr ""
#. parameter name
#: boxes/generators/dividertray.py
msgid "handle"
msgstr ""
#. help for parameter handle
#: boxes/generators/dividertray.py
msgid "add handle to the bottom"
msgstr ""
msgid "Settings for Divider Slots"
msgstr ""
#. help for parameter angle
#: boxes/generators/dividertray.py
msgid "angle at which slots are generated, in degrees. 0° is vertical."
msgstr ""
#. help for parameter depth
#: boxes/generators/dividertray.py
msgid "depth of the slot in mm"
msgstr ""
#. parameter name for Slot
#: boxes/generators/dividertray.py
msgid "extra_slack"
msgstr ""
#. help for parameter extra_slack
#: boxes/generators/dividertray.py
msgid ""
"extra slack (in addition to thickness and kerf) to help insert dividers in mm"
msgstr ""
#. help for parameter radius
#: boxes/generators/dividertray.py
msgid "radius of the slot entrance in mm"
msgstr ""
msgid "Settings for Notches on the Dividers"
msgstr ""
#. parameter name for Notch
#: boxes/generators/dividertray.py
msgid "lower_radius"
msgstr ""
#. parameter name for Notch
#: boxes/generators/dividertray.py
msgid "upper_radius"
msgstr ""
msgid "Settings for Dividers"
msgstr ""
#. parameter name for Divider
#: boxes/generators/dividertray.py
msgid "bottom_margin"
msgstr ""
#. help for parameter bottom_margin
#: boxes/generators/dividertray.py
msgid "margin between box's bottom and divider's in mm"
msgstr ""
#. help for parameter play
#: boxes/generators/dividertray.py
msgid "play to avoid them clamping onto the walls (in multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/doubleflexdoorbox.py
msgid "DoubleFlexDoorBox"
msgstr ""
#. description of DoubleFlexDoorBox
#: boxes/generators/doubleflexdoorbox.py
msgid "Box with two part lid with living hinges and round corners"
msgstr ""
msgid "DoubleFlexDoorBox Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/doubleflexdoorbox.py
msgid "Radius of the latch in mm"
msgstr ""
#. parameter name
#: boxes/generators/doubleflexdoorbox.py
msgid "latchsize"
msgstr ""
#. help for parameter latchsize
#: boxes/generators/doubleflexdoorbox.py
msgid "size of latch in multiples of thickness"
msgstr ""
#. name of box generator
#: boxes/generators/drillbox.py
msgid "DrillBox"
msgstr ""
#. description of DrillBox
#: boxes/generators/drillbox.py
msgid "A parametrized box for drills"
msgstr ""
msgid "DrillBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/drillbox.py
msgid "holes"
msgstr ""
#. help for parameter holes
#: boxes/generators/drillbox.py
msgid "Number of holes for each size"
msgstr ""
#. parameter name
#: boxes/generators/drillbox.py
msgid "firsthole"
msgstr ""
#. help for parameter firsthole
#: boxes/generators/drillbox.py
msgid "Smallest hole"
msgstr ""
#. parameter name
#: boxes/generators/drillbox.py
msgid "holeincrement"
msgstr ""
#. help for parameter holeincrement
#: boxes/generators/drillbox.py
msgid "increment between holes"
msgstr ""
msgid "Settings for RoundedTriangleEdge"
msgstr ""
#. help for parameter height
#: boxes/generators/drillbox.py
msgid "height above the wall"
msgstr ""
#. parameter name for RoundedTriangleEdge
#: boxes/generators/drillbox.py
msgid "r_hole"
msgstr ""
#. help for parameter r_hole
#: boxes/generators/drillbox.py
msgid "radius of hole"
msgstr ""
#. help for parameter radius
#: boxes/generators/drillbox.py
msgid "radius of top corner"
msgstr ""
#. help for parameter outset
#: boxes/generators/drillbox.py
msgid ""
"extend the triangle along the length of the edge (multiples of thickness)"
msgstr ""
msgid "Settings for Mounting Edge"
msgstr ""
#. parameter name for Mounting
#: boxes/generators/drillbox.py
msgid "d_head"
msgstr ""
#. help for parameter d_head
#: boxes/generators/drillbox.py
msgid "head diameter of mounting screw (in mm)"
msgstr ""
#. parameter name for Mounting
#: boxes/generators/drillbox.py
msgid "d_shaft"
msgstr ""
#. help for parameter d_shaft
#: boxes/generators/drillbox.py
msgid "shaft diameter of mounting screw (in mm)"
msgstr ""
#. help for parameter margin
#: boxes/generators/drillbox.py
msgid ""
"minimum space left and right without holes (fraction of the edge length)"
msgstr ""
#. help for parameter num
#: boxes/generators/drillbox.py
msgid "number of mounting holes (integer)"
msgstr ""
#. parameter name for Mounting
#: boxes/generators/drillbox.py
msgid "side"
msgstr ""
#. help for parameter side
#: boxes/generators/drillbox.py
msgid "side of box (not all valid configurations make sense...)"
msgstr ""
#. possible choice for side
#: boxes/generators/drillbox.py
msgid "back"
msgstr ""
#. help for parameter style
#: boxes/generators/drillbox.py
msgid "edge style"
msgstr ""
#. possible choice for style
#: boxes/generators/drillbox.py
msgid "straight edge, within"
msgstr ""
#. possible choice for style
#: boxes/generators/drillbox.py
msgid "straight edge, extended"
msgstr ""
#. possible choice for style
#: boxes/generators/drillbox.py
msgid "mounting tab"
msgstr ""
#. name of box generator
#: boxes/generators/drillstand.py
msgid "DrillStand"
msgstr ""
#. description of DrillStand
#: boxes/generators/drillstand.py
msgid "Box for drills with each compartment of a different height"
msgstr ""
#. long description of DrillStand in markdown
#: boxes/generators/drillstand.py
msgid ""
"Note: `sh` gives the hight of the rows front to back. It though should have "
"the same number of entries as `sy`. These heights are the one on the left "
"side and increase throughout the row. To have each compartment a bit higher "
"than the previous one the steps in `sh` should be a bit bigger than "
"`extra_height`.\n"
"\n"
"Assembly:\n"
"\n"
"![Parts](static/samples/DrillStand-drawing.png)\n"
"\n"
"Start with putting the slots of the inner walls together. Be especially "
"careful with adding the bottom. It is always asymmetrical and flush with the "
"right/lower side while being a little short on the left/higher side to not "
"protrude into the side wall.\n"
"\n"
"| | |\n"
"| ---- | ---- |\n"
"| ![Assembly inner walls](static/samples/DrillStand-assembly-1.jpg) | !"
"[Assembly bottom](static/samples/DrillStand-assembly-2.jpg) |\n"
"| Then add the front and the back wall. | Add the very left and right walls "
"last. |\n"
"| ![Assembly front and back](static/samples/DrillStand-assembly-3.jpg) | !"
"[Assembly side walls](static/samples/DrillStand-assembly-4.jpg) |\n"
msgstr ""
msgid "DrillStand Settings"
msgstr ""
#. parameter name
#: boxes/generators/drillstand.py
msgid "extra_height"
msgstr ""
#. help for parameter extra_height
#: boxes/generators/drillstand.py
msgid "height difference left to right"
msgstr ""
#. name of box generator
#: boxes/generators/electronicsbox.py
msgid "ElectronicsBox"
msgstr ""
#. description of ElectronicsBox
#: boxes/generators/electronicsbox.py
msgid "Closed box with screw on top and mounting holes"
msgstr ""
msgid "ElectronicsBox Settings"
msgstr ""
#. help for parameter triangle
#: boxes/generators/electronicsbox.py
msgid "Sides of the triangles holding the lid in mm"
msgstr ""
#. parameter name
#: boxes/generators/electronicsbox.py
msgid "d1"
msgstr ""
#. help for parameter d1
#: boxes/generators/electronicsbox.py
msgid "Diameter of the inner lid screw holes in mm"
msgstr ""
#. parameter name
#: boxes/generators/electronicsbox.py
msgid "d2"
msgstr ""
#. help for parameter d2
#: boxes/generators/electronicsbox.py
msgid "Diameter of the lid screw holes in mm"
msgstr ""
#. parameter name
#: boxes/generators/electronicsbox.py
msgid "d3"
msgstr ""
#. help for parameter d3
#: boxes/generators/electronicsbox.py
msgid "Diameter of the mounting screw holes in mm"
msgstr ""
#. parameter name
#: boxes/generators/electronicsbox.py
msgid "outsidemounts"
msgstr ""
#. help for parameter outsidemounts
#: boxes/generators/electronicsbox.py
msgid "Add external mounting points"
msgstr ""
#. parameter name
#: boxes/generators/electronicsbox.py
msgid "holedist"
msgstr ""
#. help for parameter holedist
#: boxes/generators/electronicsbox.py
msgid "Distance of the screw holes from the wall in mm"
msgstr ""
#. name of box generator
#: boxes/generators/eurorackskiff.py
msgid "EuroRackSkiff"
msgstr ""
#. description of EuroRackSkiff
#: boxes/generators/eurorackskiff.py
msgid "3U Height case with adjustable width and height and included rails"
msgstr ""
msgid "EuroRackSkiff Settings"
msgstr ""
#. parameter name
#: boxes/generators/eurorackskiff.py
msgid "hp"
msgstr ""
#. help for parameter hp
#: boxes/generators/eurorackskiff.py
msgid "Width of the case in HP"
msgstr ""
#. name of box generator
#: boxes/generators/fanhole.py
msgid "FanHole"
msgstr ""
#. description of FanHole
#: boxes/generators/fanhole.py
msgid "Hole pattern for mounting a fan"
msgstr ""
msgid "FanHole Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/fanhole.py
msgid "diameter of the fan hole"
msgstr ""
#. parameter name
#: boxes/generators/fanhole.py
msgid "mounting_holes"
msgstr ""
#. help for parameter mounting_holes
#: boxes/generators/fanhole.py
msgid "diameter of the fan mounting holes"
msgstr ""
#. parameter name
#: boxes/generators/fanhole.py
msgid "mounting_holes_inset"
msgstr ""
#. help for parameter mounting_holes_inset
#: boxes/generators/fanhole.py
msgid "distance of the fan mounting holes from the outside"
msgstr ""
#. parameter name
#: boxes/generators/fanhole.py
msgid "arms"
msgstr ""
#. help for parameter arms
#: boxes/generators/fanhole.py
msgid "number of arms"
msgstr ""
#. parameter name
#: boxes/generators/fanhole.py
msgid "inner_disc"
msgstr ""
#. help for parameter inner_disc
#: boxes/generators/fanhole.py
msgid "relative size of the inner disc"
msgstr ""
#. help for parameter style
#: boxes/generators/fanhole.py
msgid "Style of the fan hole"
msgstr ""
#. possible choice for style
#: boxes/generators/fanhole.py
msgid "CW Swirl"
msgstr ""
#. possible choice for style
#: boxes/generators/fanhole.py
msgid "CCW Swirl"
msgstr ""
#. possible choice for style
#: boxes/generators/fanhole.py
msgid "Hole"
msgstr ""
#. name of box generator
#: boxes/generators/filltest.py
msgid "FillTest"
msgstr ""
#. description of FillTest
#: boxes/generators/filltest.py
msgid "Piece for testing different settings for hole filling"
msgstr ""
msgid "FillTest Settings"
msgstr ""
#. description of FlexBox
#: boxes/generators/flexbox.py
msgid "Box with living hinge and round corners"
msgstr ""
msgid "FlexBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/flexbox2.py
msgid "FlexBox2"
msgstr ""
#. description of FlexBox2
#: boxes/generators/flexbox2.py
msgid "Box with living hinge and top corners rounded"
msgstr ""
msgid "FlexBox2 Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/flexbox2.py
msgid "Radius of the corners in mm"
msgstr ""
#. name of box generator
#: boxes/generators/flexbox3.py
msgid "FlexBox3"
msgstr ""
#. description of FlexBox3
#: boxes/generators/flexbox3.py
msgid "Box with living hinge"
msgstr ""
msgid "FlexBox3 Settings"
msgstr ""
#. parameter name
#: boxes/generators/flexbox3.py
msgid "z"
msgstr ""
#. help for parameter z
#: boxes/generators/flexbox3.py
msgid "height of the box"
msgstr ""
#. help for parameter h
#: boxes/generators/flexbox3.py
msgid "height of the lid"
msgstr ""
#. help for parameter radius
#: boxes/generators/flexbox3.py
msgid "radius of the lids living hinge"
msgstr ""
#. help for parameter c
#: boxes/generators/flexbox3.py
msgid "clearance of the lid"
msgstr ""
#. name of box generator
#: boxes/generators/flexbox4.py
msgid "FlexBox4"
msgstr ""
#. description of FlexBox4
#: boxes/generators/flexbox4.py
msgid "Box with living hinge and left corners rounded"
msgstr ""
msgid "FlexBox4 Settings"
msgstr ""
#. name of box generator
#: boxes/generators/flexbox5.py
msgid "FlexBox5"
msgstr ""
msgid "FlexBox5 Settings"
msgstr ""
#. parameter name
#: boxes/generators/flexbox5.py
msgid "top_diameter"
msgstr ""
#. help for parameter top_diameter
#: boxes/generators/flexbox5.py
msgid "diameter at the top"
msgstr ""
#. parameter name
#: boxes/generators/flexbox5.py
msgid "bottom_diameter"
msgstr ""
#. help for parameter bottom_diameter
#: boxes/generators/flexbox5.py
msgid "diameter at the bottom"
msgstr ""
#. name of box generator
#: boxes/generators/flextest.py
msgid "FlexTest"
msgstr ""
#. description of FlexTest
#: boxes/generators/flextest.py
msgid "Piece for testing different flex settings"
msgstr ""
msgid "FlexTest Settings"
msgstr ""
#. name of box generator
#: boxes/generators/flextest2.py
msgid "FlexTest2"
msgstr ""
#. description of FlexTest2
#: boxes/generators/flextest2.py
msgid "Piece for testing 2D flex settings"
msgstr ""
msgid "FlexTest2 Settings"
msgstr ""
#. parameter name
#: boxes/generators/flextest2.py
msgid "fw"
msgstr ""
#. help for parameter fw
#: boxes/generators/flextest2.py
msgid "distance of flex cuts in multiples of thickness"
msgstr ""
#. name of box generator
#: boxes/generators/flexurekit.py
msgid "FlexureKit"
msgstr ""
#. description of FlexureKit
#: boxes/generators/flexurekit.py
msgid "DESCRIPTION"
msgstr ""
msgid "FlexureKit Settings"
msgstr ""
#. parameter name
#: boxes/generators/flexurekit.py
msgid "grid"
msgstr ""
#. help for parameter grid
#: boxes/generators/flexurekit.py
msgid "space from grid point to grip point"
msgstr ""
#. name of box generator
#: boxes/generators/folder.py
msgid "Folder"
msgstr ""
#. description of Folder
#: boxes/generators/folder.py
msgid "Book cover with flex for the spine"
msgstr ""
msgid "Folder Settings"
msgstr ""
#. parameter name
#: boxes/generators/folder.py
msgid "r"
msgstr ""
#. name of box generator
#: boxes/generators/gear.py
msgid "Gears"
msgstr ""
msgid "Gears Settings"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "teeth1"
msgstr ""
#. help for parameter teeth1
#: boxes/generators/gear.py
msgid "number of teeth"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "shaft1"
msgstr ""
#. help for parameter shaft1
#: boxes/generators/gear.py
msgid "diameter of the shaft 1"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "dpercentage1"
msgstr ""
#. help for parameter dpercentage1
#: boxes/generators/gear.py
msgid "percent of the D section of shaft 1 (100 for round shaft)"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "teeth2"
msgstr ""
#. help for parameter teeth2
#: boxes/generators/gear.py
msgid "number of teeth in the other size of gears"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "shaft2"
msgstr ""
#. help for parameter shaft2
#: boxes/generators/gear.py
msgid "diameter of the shaft2 (zero for same as shaft 1)"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "dpercentage2"
msgstr ""
#. help for parameter dpercentage2
#: boxes/generators/gear.py
msgid "percent of the D section of shaft 1 (0 for same as shaft 1)"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "modulus"
msgstr ""
#. help for parameter modulus
#: boxes/generators/gear.py
msgid "size of teeth (diameter / #teeth) in mm"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "pressure_angle"
msgstr ""
#. help for parameter pressure_angle
#: boxes/generators/gear.py
msgid "angle of the teeth touching (in degrees)"
msgstr ""
#. parameter name
#: boxes/generators/gear.py
msgid "profile_shift"
msgstr ""
#. help for parameter profile_shift
#: boxes/generators/gear.py
msgid "in precent of the modulus"
msgstr ""
#. name of box generator
#: boxes/generators/gearbox.py
msgid "GearBox"
msgstr ""
#. description of GearBox
#: boxes/generators/gearbox.py
msgid "Gearbox with multiple identical stages"
msgstr ""
msgid "GearBox Settings"
msgstr ""
#. help for parameter teeth1
#: boxes/generators/gearbox.py
msgid "number of teeth on ingoing shaft"
msgstr ""
#. help for parameter teeth2
#: boxes/generators/gearbox.py
msgid "number of teeth on outgoing shaft"
msgstr ""
#. help for parameter modulus
#: boxes/generators/gearbox.py
msgid "modulus of the teeth in mm"
msgstr ""
#. parameter name
#: boxes/generators/gearbox.py
msgid "shaft"
msgstr ""
#. help for parameter shaft
#: boxes/generators/gearbox.py
msgid "diameter of the shaft"
msgstr ""
#. parameter name
#: boxes/generators/gearbox.py
msgid "stages"
msgstr ""
#. help for parameter stages
#: boxes/generators/gearbox.py
msgid "number of stages in the gear reduction"
msgstr ""
#. name of box generator
#: boxes/generators/halfbox.py
msgid "HalfBox"
msgstr ""
#. description of HalfBox
#: boxes/generators/halfbox.py
msgid ""
"Configurable half of a box which can be: a bookend, a hanging shelf, an "
"angle clamping jig, ..."
msgstr ""
#. long description of HalfBox in markdown
#: boxes/generators/halfbox.py
msgid ""
"This can be used to create:\n"
"\n"
"* a hanging shelf:\n"
"![HalfBox as hanging shelf](static/samples/HalfBox_Shelf_usage.jpg)\n"
"\n"
"* an angle clamping jig:\n"
"![HalfBox as an angle clamping jig](static/samples/HalfBox_AngleJig_usage."
"jpg)\n"
"\n"
"* a bookend:\n"
"![HalfBox as a bookend](static/samples/HalfBox_Bookend_usage.jpg)\n"
"\n"
"and many more...\n"
"\n"
msgstr ""
msgid "HalfBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/halfbox.py
msgid "Clamping"
msgstr ""
#. help for parameter Clamping
#: boxes/generators/halfbox.py
msgid "add clamping holes"
msgstr ""
#. parameter name
#: boxes/generators/halfbox.py
msgid "ClampingSize"
msgstr ""
#. help for parameter ClampingSize
#: boxes/generators/halfbox.py
msgid "diameter of clamping holes"
msgstr ""
#. parameter name
#: boxes/generators/halfbox.py
msgid "Mounting"
msgstr ""
#. help for parameter Mounting
#: boxes/generators/halfbox.py
msgid "add mounting holes"
msgstr ""
#. parameter name
#: boxes/generators/halfbox.py
msgid "Sturdy"
msgstr ""
#. help for parameter Sturdy
#: boxes/generators/halfbox.py
msgid "create sturdy construction (e.g. shelf, clamping jig, ...)"
msgstr ""
#. name of box generator
#: boxes/generators/heart.py
msgid "HeartBox"
msgstr ""
#. description of HeartBox
#: boxes/generators/heart.py
msgid "Box in the form of a heart"
msgstr ""
msgid "HeartBox Settings"
msgstr ""
#. possible choice for top
#: boxes/generators/heart.py
msgid "closed"
msgstr ""
#. possible choice for top
#: boxes/generators/heart.py
msgid "hole"
msgstr ""
#. possible choice for top
#: boxes/generators/heart.py
msgid "lid"
msgstr ""
#. name of box generator
#: boxes/generators/hingebox.py
msgid "HingeBox"
msgstr ""
#. description of HingeBox
#: boxes/generators/hingebox.py
msgid "Box with lid attached by cabinet hinges"
msgstr ""
#. long description of HingeBox in markdown
#: boxes/generators/hingebox.py
msgid ""
"Needs (metal) pins as hinge axles. Pieces of nails will\n"
"do fine. They need to be cut to length as they are captured as soon as the\n"
"hinges are assembled.\n"
"\n"
"Assemble the box and the lid separately. Then insert the axle into the "
"hinges.\n"
"Then attach the hinges on the inside of the box and then connect them to "
"lid.\n"
msgstr ""
msgid "HingeBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/hingebox.py
msgid "splitlid"
msgstr ""
#. help for parameter splitlid
#: boxes/generators/hingebox.py
msgid "split the lid in y direction (mm)"
msgstr ""
msgid "Settings for Cabinet Hinges"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "bore"
msgstr ""
#. help for parameter bore
#: boxes/generators/hingebox.py
msgid "diameter of the pin hole in mm"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "eyes_per_hinge"
msgstr ""
#. help for parameter eyes_per_hinge
#: boxes/generators/hingebox.py
msgid "pieces per hinge"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "hinges"
msgstr ""
#. help for parameter hinges
#: boxes/generators/hingebox.py
msgid "number of hinges per edge"
msgstr ""
#. help for parameter style
#: boxes/generators/hingebox.py
msgid "style of hinge used"
msgstr ""
#. possible choice for style
#: boxes/generators/hingebox.py
msgid "inside"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "eye"
msgstr ""
#. help for parameter eye
#: boxes/generators/hingebox.py
msgid "radius of the eye (multiples of thickness)"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "link_length"
msgstr ""
#. help for parameter link_length
#: boxes/generators/hingebox.py
msgid "length of connecting piece for \"double\" style"
msgstr ""
#. help for parameter play
#: boxes/generators/hingebox.py
msgid "space between eyes (multiples of thickness)"
msgstr ""
#. parameter name for CabinetHinge
#: boxes/generators/hingebox.py
msgid "spacing"
msgstr ""
#. help for parameter spacing
#: boxes/generators/hingebox.py
msgid "minimum space around the hinge (multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/holepattern.py
msgid "HolePattern"
msgstr ""
#. description of HolePattern
#: boxes/generators/holepattern.py
msgid "Generate hole patterns in different simple shapes"
msgstr ""
msgid "HolePattern Settings"
msgstr ""
#. parameter name
#: boxes/generators/holepattern.py
msgid "shape"
msgstr ""
#. help for parameter shape
#: boxes/generators/holepattern.py
msgid "Shape of the hole pattern"
msgstr ""
#. possible choice for shape
#: boxes/generators/holepattern.py
msgid "rectangle"
msgstr ""
#. possible choice for shape
#: boxes/generators/holepattern.py
msgid "ellipse"
msgstr ""
#. possible choice for shape
#: boxes/generators/holepattern.py
msgid "oval"
msgstr ""
#. name of box generator
#: boxes/generators/hooks.py
msgid "Hook"
msgstr ""
#. description of Hook
#: boxes/generators/hooks.py
msgid "A hook with a rectangular mouth to mount at the wall"
msgstr ""
msgid "Hook Settings"
msgstr ""
#. help for parameter width
#: boxes/generators/hooks.py
msgid "width of the hook (back plate is a bit wider)"
msgstr ""
#. help for parameter height
#: boxes/generators/hooks.py
msgid "inner height of the hook"
msgstr ""
#. help for parameter depth
#: boxes/generators/hooks.py
msgid "inner depth of the hook"
msgstr ""
#. parameter name
#: boxes/generators/hooks.py
msgid "strength"
msgstr ""
#. help for parameter strength
#: boxes/generators/hooks.py
msgid "width of the hook from the side"
msgstr ""
#. help for parameter angle
#: boxes/generators/hooks.py
msgid "angle of the support underneath"
msgstr ""
#. name of box generator
#: boxes/generators/integratedhingebox.py
msgid "IntegratedHingeBox"
msgstr ""
#. description of IntegratedHingeBox
#: boxes/generators/integratedhingebox.py
msgid "Box with lid and integraded hinge"
msgstr ""
msgid "IntegratedHingeBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/jointpanel.py
msgid "JointPanel"
msgstr ""
#. description of JointPanel
#: boxes/generators/jointpanel.py
msgid ""
"Create pieces larger than your laser cutter by joining them with Dove Tails"
msgstr ""
#. long description of JointPanel in markdown
#: boxes/generators/jointpanel.py
msgid ""
"This can be used to just create a big panel in a smaller laser cutter. But "
"the actual use is to split large parts into multiple smaller pieces. Copy "
"the outline onto the sheet and then use the pieces to cut it into multiple "
"parts that each can fit your laser cutter. Note that each piece must be cut "
"with the sheet surrounding it to ensure the burn correction (aka kerf) is "
"correct. Depending on your vector graphics software you may need to "
"duplicate your part multiple times and then generate the intersection "
"between one copy and each rectangular part.\n"
"\n"
"The Boxes.py drawings assume that the laser is cutting in the center of the "
"line and the width of the line represents the material that is cut away. "
"Make sure your changes work the same way and you do not cutting away the "
"kerf.\n"
"\n"
"Small dove tails make it easier to fit parts in without problems. Lookout "
"for pieces cut loose where the dove tails meet the edge of the parts. Move "
"your part if necessary to avoid dove tails or details of your part colliding "
"in a weird way.\n"
"\n"
"For plywood this method works well with a very stiff press fit. Aim for "
"needing a hammer to join the pieces together. This way they will feel like "
"they have been welder together.\n"
"\n"
msgstr ""
msgid "JointPanel Settings"
msgstr ""
#. parameter name
#: boxes/generators/jointpanel.py
msgid "separate"
msgstr ""
#. help for parameter separate
#: boxes/generators/jointpanel.py
msgid "draw pieces apart so they can be cut to form a large sheet"
msgstr ""
msgid "Settings for Dove Tail Joints"
msgstr ""
#. help for parameter angle
#: boxes/generators/jointpanel.py
msgid "how much should fingers widen (-80 to 80)"
msgstr ""
#. help for parameter depth
#: boxes/generators/jointpanel.py
msgid ""
"how far the dove tails stick out of/into the edge (multiples of thickness)"
msgstr ""
#. help for parameter radius
#: boxes/generators/jointpanel.py
msgid "radius used on all four corners (multiples of thickness)"
msgstr ""
#. parameter name for DoveTail
#: boxes/generators/jointpanel.py
msgid "size"
msgstr ""
#. help for parameter size
#: boxes/generators/jointpanel.py
msgid "from one middle of a dove tail to another (multiples of thickness)"
msgstr ""
#. name of box generator
#: boxes/generators/keypad.py
msgid "Keypad"
msgstr ""
#. description of Keypad
#: boxes/generators/keypad.py
msgid "Generator for keypads with mechanical switches."
msgstr ""
#. long description of Keypad in markdown
#: boxes/generators/keypad.py
msgid ""
"Note that top layers use a different material thickness according to the "
"top1_thickness and top2_thickness (if enabled)."
msgstr ""
msgid "Keypad Settings"
msgstr ""
#. parameter name
#: boxes/generators/keypad.py
msgid "top1_thickness"
msgstr ""
#. help for parameter top1_thickness
#: boxes/generators/keypad.py
msgid ""
"thickness of the button hold layer, cherry like switches need 1.5mm or "
"smaller to snap in"
msgstr ""
#. parameter name
#: boxes/generators/keypad.py
msgid "top2_enable"
msgstr ""
#. help for parameter top2_enable
#: boxes/generators/keypad.py
msgid "enables another top layer that can hold CPG151101S11 hotswap sockets"
msgstr ""
#. parameter name
#: boxes/generators/keypad.py
msgid "top2_thickness"
msgstr ""
#. help for parameter top2_thickness
#: boxes/generators/keypad.py
msgid ""
"thickness of the hotplug layer, CPG151101S11 hotswap sockets need 1.2mm to "
"1.5mm"
msgstr ""
#. name of box generator
#: boxes/generators/laptopstand.py
msgid "LaptopStand"
msgstr ""
#. description of LaptopStand
#: boxes/generators/laptopstand.py
msgid "A simple X shaped frame to support a laptop on a given angle"
msgstr ""
msgid "LaptopStand Settings"
msgstr ""
#. parameter name
#: boxes/generators/laptopstand.py
msgid "l_depth"
msgstr ""
#. help for parameter l_depth
#: boxes/generators/laptopstand.py
msgid "laptop depth - front to back (mm)"
msgstr ""
#. parameter name
#: boxes/generators/laptopstand.py
msgid "l_thickness"
msgstr ""
#. help for parameter l_thickness
#: boxes/generators/laptopstand.py
msgid "laptop thickness (mm)"
msgstr ""
#. help for parameter angle
#: boxes/generators/laptopstand.py
msgid "desired tilt of keyboard (deg)"
msgstr ""
#. parameter name
#: boxes/generators/laptopstand.py
msgid "ground_offset"
msgstr ""
#. help for parameter ground_offset
#: boxes/generators/laptopstand.py
msgid ""
"desired height between bottom of laptop and ground at lowest point (front of "
"laptop stand)"
msgstr ""
#. parameter name
#: boxes/generators/laptopstand.py
msgid "nub_size"
msgstr ""
#. help for parameter nub_size
#: boxes/generators/laptopstand.py
msgid "desired thickness of the supporting edge"
msgstr ""
#. name of box generator
#: boxes/generators/laserclamp.py
msgid "LaserClamp"
msgstr ""
#. description of LaserClamp
#: boxes/generators/laserclamp.py
msgid "A clamp to hold down material to a knife table"
msgstr ""
#. long description of LaserClamp in markdown
#: boxes/generators/laserclamp.py
msgid ""
"You need a tension spring of the proper length to make the clamp work.\n"
"Increase extraheight to get more space for the spring and to make the\n"
"sliding mechanism less likely to bind. You may need to add some wax on the\n"
"parts sliding on each other to reduce friction.\n"
msgstr ""
msgid "LaserClamp Settings"
msgstr ""
#. parameter name
#: boxes/generators/laserclamp.py
msgid "minheight"
msgstr ""
#. help for parameter minheight
#: boxes/generators/laserclamp.py
msgid "minimal clamping height in mm"
msgstr ""
#. parameter name
#: boxes/generators/laserclamp.py
msgid "maxheight"
msgstr ""
#. help for parameter maxheight
#: boxes/generators/laserclamp.py
msgid "maximal clamping height in mm"
msgstr ""
#. parameter name
#: boxes/generators/laserclamp.py
msgid "extraheight"
msgstr ""
#. help for parameter extraheight
#: boxes/generators/laserclamp.py
msgid "extra height to make operation smoother in mm"
msgstr ""
#. name of box generator
#: boxes/generators/laserholdfast.py
msgid "LaserHoldfast"
msgstr ""
#. description of LaserHoldfast
#: boxes/generators/laserholdfast.py
msgid "A holdfast for honey comb tables of laser cutters"
msgstr ""
msgid "LaserHoldfast Settings"
msgstr ""
#. parameter name
#: boxes/generators/laserholdfast.py
msgid "hookheight"
msgstr ""
#. help for parameter hookheight
#: boxes/generators/laserholdfast.py
msgid "height of the top hook"
msgstr ""
#. parameter name
#: boxes/generators/laserholdfast.py
msgid "shaftwidth"
msgstr ""
#. help for parameter shaftwidth
#: boxes/generators/laserholdfast.py
msgid "width of the shaft"
msgstr ""
#. name of box generator
#: boxes/generators/laserlini.py
msgid "Laserlini"
msgstr ""
#. description of Laserlini
#: boxes/generators/laserlini.py
msgid "Mini cross bow"
msgstr ""
msgid "Laserlini Settings"
msgstr ""
#. name of box generator
#: boxes/generators/lbeam.py
msgid "LBeam"
msgstr ""
#. description of LBeam
#: boxes/generators/lbeam.py
msgid "Simple L-Beam: two pieces joined with a right angle"
msgstr ""
msgid "LBeam Settings"
msgstr ""
#. name of box generator
#: boxes/generators/magazinefile.py
msgid "MagazineFile"
msgstr ""
#. description of MagazineFile
#: boxes/generators/magazinefile.py
msgid "Open magazine file"
msgstr ""
msgid "MagazineFile Settings"
msgstr ""
#. name of box generator
#: boxes/generators/makitalamp.py
msgid "MakitaLamp"
msgstr ""
#. description of MakitaLamp
#: boxes/generators/makitalamp.py
msgid "LED Lamp powered with Maktia 18V battery"
msgstr ""
#. long description of MakitaLamp in markdown
#: boxes/generators/makitalamp.py
msgid ""
"\n"
"Vitamins: Stepdown convertor, switch, LED COB\n"
"\n"
msgstr ""
msgid "MakitaLamp Settings"
msgstr ""
#. parameter name
#: boxes/generators/makitalamp.py
msgid "flipswitch_diameter"
msgstr ""
#. help for parameter flipswitch_diameter
#: boxes/generators/makitalamp.py
msgid "diameter of the flipswitch mounting hole"
msgstr ""
#. name of box generator
#: boxes/generators/makitapowersupply.py
msgid "MakitaPowerSupply"
msgstr ""
#. description of MakitaPowerSupply
#: boxes/generators/makitapowersupply.py
msgid ""
"Bench power supply powered with Maktia 18V battery or laptop power supply"
msgstr ""
#. long description of MakitaPowerSupply in markdown
#: boxes/generators/makitapowersupply.py
msgid ""
"\n"
"Vitamins: DSP5005 (or similar) power supply, two banana sockets, two 4.8mm "
"flat terminals with flat soldering tag\n"
"\n"
"To allow powering by laptop power supply: flip switch, Lenovo round socket "
"(or adjust right hole for different socket)\n"
msgstr ""
msgid "MakitaPowerSupply Settings"
msgstr ""
#. parameter name
#: boxes/generators/makitapowersupply.py
msgid "banana_socket_diameter"
msgstr ""
#. help for parameter banana_socket_diameter
#: boxes/generators/makitapowersupply.py
msgid "diameter of the banana socket mounting holes"
msgstr ""
#. name of box generator
#: boxes/generators/makitalamp2.py
msgid "MakitaLamp2"
msgstr ""
#. description of MakitaLamp2
#: boxes/generators/makitalamp2.py
msgid "Flood lamp powered with Maktia 18V battery"
msgstr ""
#. long description of MakitaLamp2 in markdown
#: boxes/generators/makitalamp2.py
msgid ""
"\n"
"Vitamins:\n"
msgstr ""
msgid "MakitaLamp2 Settings"
msgstr ""
#. name of box generator
#: boxes/generators/microrack.py
msgid "SBCMicroRack"
msgstr ""
#. description of SBCMicroRack
#: boxes/generators/microrack.py
msgid "Stackable rackable racks for SBC Pi-Style Computers"
msgstr ""
msgid "SBCMicroRack Settings"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "sbcs"
msgstr ""
#. help for parameter sbcs
#: boxes/generators/microrack.py
msgid "how many slots for sbcs"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "clearance_x"
msgstr ""
#. help for parameter clearance_x
#: boxes/generators/microrack.py
msgid "clearance for the board in the box (x) in mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "clearance_y"
msgstr ""
#. help for parameter clearance_y
#: boxes/generators/microrack.py
msgid "clearance for the board in the box (y) in mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "clearance_z"
msgstr ""
#. help for parameter clearance_z
#: boxes/generators/microrack.py
msgid "SBC Clearance in mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "hole_dist_edge"
msgstr ""
#. help for parameter hole_dist_edge
#: boxes/generators/microrack.py
msgid "hole distance from edge in mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "hole_grid_dimension_x"
msgstr ""
#. help for parameter hole_grid_dimension_x
#: boxes/generators/microrack.py
msgid "width of x hole area"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "hole_grid_dimension_y"
msgstr ""
#. help for parameter hole_grid_dimension_y
#: boxes/generators/microrack.py
msgid "width of y hole area"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "hole_diameter"
msgstr ""
#. help for parameter hole_diameter
#: boxes/generators/microrack.py
msgid "hole diameters"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "netusb_z"
msgstr ""
#. help for parameter netusb_z
#: boxes/generators/microrack.py
msgid "height of the net/usb hole mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "netusb_x"
msgstr ""
#. help for parameter netusb_x
#: boxes/generators/microrack.py
msgid "width of the net/usb hole in mm"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "stable"
msgstr ""
#. help for parameter stable
#: boxes/generators/microrack.py
msgid "draw some holes to put a 1/4\" dowel through at the base and top"
msgstr ""
#. parameter name
#: boxes/generators/microrack.py
msgid "switch"
msgstr ""
#. help for parameter switch
#: boxes/generators/microrack.py
msgid ""
"adds an additional vertical segment to hold the switch in place, works best "
"w/ --stable"
msgstr ""
#. name of box generator
#: boxes/generators/nemamount.py
msgid "NemaMount"
msgstr ""
#. description of NemaMount
#: boxes/generators/nemamount.py
msgid "Mounting bracket for a Nema motor"
msgstr ""
msgid "NemaMount Settings"
msgstr ""
#. help for parameter size
#: boxes/generators/nemamount.py
msgid "Nema size of the motor"
msgstr ""
#. name of box generator
#: boxes/generators/nemapattern.py
msgid "NemaPattern"
msgstr ""
#. description of NemaPattern
#: boxes/generators/nemapattern.py
msgid "Mounting holes for a Nema motor"
msgstr ""
msgid "NemaPattern Settings"
msgstr ""
#. parameter name
#: boxes/generators/nemapattern.py
msgid "screwholes"
msgstr ""
#. help for parameter screwholes
#: boxes/generators/nemapattern.py
msgid "Size of the screw holes in mm - 0 for default size"
msgstr ""
#. name of box generator
#: boxes/generators/notesholder.py
msgid "NotesHolder"
msgstr ""
#. description of NotesHolder
#: boxes/generators/notesholder.py
msgid "Box for holding a stack of paper, coasters etc"
msgstr ""
msgid "NotesHolder Settings"
msgstr ""
#. parameter name
#: boxes/generators/notesholder.py
msgid "opening"
msgstr ""
#. help for parameter opening
#: boxes/generators/notesholder.py
msgid "percent of front that's open"
msgstr ""
#. name of box generator
#: boxes/generators/openbox.py
msgid "OpenBox"
msgstr ""
#. description of OpenBox
#: boxes/generators/openbox.py
msgid "Box with top and front open"
msgstr ""
msgid "OpenBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/openbox.py
msgid "edgetype"
msgstr ""
#. help for parameter edgetype
#: boxes/generators/openbox.py
msgid "edge type"
msgstr ""
#. name of box generator
#: boxes/generators/organpipe.py
msgid "OrganPipe"
msgstr ""
#. description of OrganPipe
#: boxes/generators/organpipe.py
msgid "Rectangular organ pipe based on pipecalc"
msgstr ""
msgid "OrganPipe Settings"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "pitch"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "c#"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "d"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "d#"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "f#"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "g"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "g#"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "a"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "a#"
msgstr ""
#. possible choice for pitch
#: boxes/generators/organpipe.py
msgid "b"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "octave"
msgstr ""
#. help for parameter octave
#: boxes/generators/organpipe.py
msgid "Octave in International Pitch Notation (2 == C)"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "intonation"
msgstr ""
#. help for parameter intonation
#: boxes/generators/organpipe.py
msgid "Intonation Number. 2 for max. efficiency, 3 max."
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "mouthratio"
msgstr ""
#. help for parameter mouthratio
#: boxes/generators/organpipe.py
msgid ""
"mouth to circumference ratio (0.1 to 0.45). Determines the width to depth "
"ratio"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "cutup"
msgstr ""
#. help for parameter cutup
#: boxes/generators/organpipe.py
msgid "Cutup to mouth ratio"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "mensur"
msgstr ""
#. help for parameter mensur
#: boxes/generators/organpipe.py
msgid "Distance in halftones in the Normalmensur by Töpfer"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "windpressure"
msgstr ""
#. help for parameter windpressure
#: boxes/generators/organpipe.py
msgid "uses unit selected below"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "windpressure_units"
msgstr ""
#. help for parameter windpressure_units
#: boxes/generators/organpipe.py
msgid "in Pa"
msgstr ""
#. possible choice for windpressure_units
#: boxes/generators/organpipe.py
msgid "Pa"
msgstr ""
#. possible choice for windpressure_units
#: boxes/generators/organpipe.py
msgid "mBar"
msgstr ""
#. possible choice for windpressure_units
#: boxes/generators/organpipe.py
msgid "mmHg"
msgstr ""
#. possible choice for windpressure_units
#: boxes/generators/organpipe.py
msgid "mmH2O"
msgstr ""
#. parameter name
#: boxes/generators/organpipe.py
msgid "stopped"
msgstr ""
#. help for parameter stopped
#: boxes/generators/organpipe.py
msgid "pipe is closed at the top"
msgstr ""
#. name of box generator
#: boxes/generators/ottobody.py
msgid "OttoBody"
msgstr ""
#. description of OttoBody
#: boxes/generators/ottobody.py
msgid "Otto LC - a laser cut chassis for Otto DIY - body"
msgstr ""
msgid "OttoBody Settings"
msgstr ""
#. name of box generator
#: boxes/generators/ottolegs.py
msgid "OttoLegs"
msgstr ""
#. description of OttoLegs
#: boxes/generators/ottolegs.py
msgid "Otto LC - a laser cut chassis for Otto DIY - legs"
msgstr ""
msgid "OttoLegs Settings"
msgstr ""
#. parameter name
#: boxes/generators/ottolegs.py
msgid "anklebolt1"
msgstr ""
#. help for parameter anklebolt1
#: boxes/generators/ottolegs.py
msgid "diameter for hole for ankle bolts - foot side"
msgstr ""
#. parameter name
#: boxes/generators/ottolegs.py
msgid "anklebolt2"
msgstr ""
#. help for parameter anklebolt2
#: boxes/generators/ottolegs.py
msgid "diameter for hole for ankle bolts - leg side"
msgstr ""
#. parameter name
#: boxes/generators/ottolegs.py
msgid "length"
msgstr ""
#. help for parameter length
#: boxes/generators/ottolegs.py
msgid "length of legs (34mm min)"
msgstr ""
#. name of box generator
#: boxes/generators/ottosoles.py
msgid "OttoSoles"
msgstr ""
#. description of OttoSoles
#: boxes/generators/ottosoles.py
msgid "Foam soles for the OttO bot"
msgstr ""
msgid "OttoSoles Settings"
msgstr ""
#. help for parameter width
#: boxes/generators/ottosoles.py
msgid "width of sole stripe"
msgstr ""
#. parameter name
#: boxes/generators/ottosoles.py
msgid "chamfer"
msgstr ""
#. help for parameter chamfer
#: boxes/generators/ottosoles.py
msgid "chamfer at the corners"
msgstr ""
#. help for parameter num
#: boxes/generators/ottosoles.py
msgid "number of soles"
msgstr ""
#. name of box generator
#: boxes/generators/paintbox.py
msgid "PaintStorage"
msgstr ""
#. description of PaintStorage
#: boxes/generators/paintbox.py
msgid "Stackable storage for hobby paint or other things"
msgstr ""
msgid "PaintStorage Settings"
msgstr ""
#. parameter name
#: boxes/generators/paintbox.py
msgid "canheight"
msgstr ""
#. help for parameter canheight
#: boxes/generators/paintbox.py
msgid "Height of the paintcans"
msgstr ""
#. parameter name
#: boxes/generators/paintbox.py
msgid "candiameter"
msgstr ""
#. help for parameter candiameter
#: boxes/generators/paintbox.py
msgid "Diameter of the paintcans"
msgstr ""
#. parameter name
#: boxes/generators/paintbox.py
msgid "minspace"
msgstr ""
#. help for parameter minspace
#: boxes/generators/paintbox.py
msgid "Minimum space between the paintcans"
msgstr ""
#. parameter name
#: boxes/generators/paintbox.py
msgid "hexpattern"
msgstr ""
#. help for parameter hexpattern
#: boxes/generators/paintbox.py
msgid "Use hexagonal arrangement for the holes instead of orthogonal"
msgstr ""
#. parameter name
#: boxes/generators/paintbox.py
msgid "drawer"
msgstr ""
#. help for parameter drawer
#: boxes/generators/paintbox.py
msgid "Create a stackable drawer instead"
msgstr ""
#. name of box generator
#: boxes/generators/paperbox.py
msgid "PaperBox"
msgstr ""
#. description of PaperBox
#: boxes/generators/paperbox.py
msgid ""
"\n"
" Box made of paper, with lid.\n"
" "
msgstr ""
#. long description of PaperBox in markdown
#: boxes/generators/paperbox.py
msgid ""
"\n"
"This box is made of paper.\n"
"\n"
"There is marks in the \"outside leftover paper\" to help see where to fold\n"
"(cutting with tabs helps use them). The cut is very precise, and could be "
"too tight if misaligned when glued. A plywood box (such as a simple "
"TypeTray) of the same size is a great guide during folding and gluing. Just "
"fold the box against it. Accurate quick and easy.\n"
"\n"
"A paper creaser (or bone folder) is also useful.\n"
msgstr ""
msgid "PaperBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "design"
msgstr ""
#. help for parameter design
#: boxes/generators/paperbox.py
msgid ""
"different design for paper consumption optimization. The tuckbox also has "
"locking cut for its lid."
msgstr ""
#. possible choice for design
#: boxes/generators/paperbox.py
msgid "automatic"
msgstr ""
#. possible choice for design
#: boxes/generators/paperbox.py
msgid "widebox"
msgstr ""
#. possible choice for design
#: boxes/generators/paperbox.py
msgid "tuckbox"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "lid_height"
msgstr ""
#. help for parameter lid_height
#: boxes/generators/paperbox.py
msgid "Height of the lid (part which goes inside the box)"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "lid_radius"
msgstr ""
#. help for parameter lid_radius
#: boxes/generators/paperbox.py
msgid "Angle, in radius, of the round corner of the lid"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "lid_sides"
msgstr ""
#. help for parameter lid_sides
#: boxes/generators/paperbox.py
msgid "Width of the two sides upon which goes the lid"
msgstr ""
#. help for parameter margin
#: boxes/generators/paperbox.py
msgid "Margin for the glued sides"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "mark_length"
msgstr ""
#. help for parameter mark_length
#: boxes/generators/paperbox.py
msgid "Length of the folding outside mark"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "tab_angle_rad"
msgstr ""
#. help for parameter tab_angle_rad
#: boxes/generators/paperbox.py
msgid "Angle (in radian) of the sides which are to be glued inside the box"
msgstr ""
#. parameter name
#: boxes/generators/paperbox.py
msgid "finger_hole_diameter"
msgstr ""
#. help for parameter finger_hole_diameter
#: boxes/generators/paperbox.py
msgid "Diameter of the hole to help catch the lid"
msgstr ""
#. name of box generator
#: boxes/generators/phoneholder.py
msgid "PhoneHolder"
msgstr ""
#. description of PhoneHolder
#: boxes/generators/phoneholder.py
msgid ""
"\n"
" Smartphone desk holder\n"
" "
msgstr ""
#. long description of PhoneHolder in markdown
#: boxes/generators/phoneholder.py
msgid ""
"\n"
" This phone stand holds your phone between two tabs, with access to its\n"
" bottom, in order to connect a charger, headphones, and also not to "
"obstruct\n"
" the mic.\n"
"\n"
" Default values are currently based on Galaxy S7.\n"
msgstr ""
msgid "PhoneHolder Settings"
msgstr ""
#. parameter name
#: boxes/generators/phoneholder.py
msgid "phone_height"
msgstr ""
#. help for parameter phone_height
#: boxes/generators/phoneholder.py
msgid "Height of the phone."
msgstr ""
#. parameter name
#: boxes/generators/phoneholder.py
msgid "phone_width"
msgstr ""
#. help for parameter phone_width
#: boxes/generators/phoneholder.py
msgid "Width of the phone."
msgstr ""
#. parameter name
#: boxes/generators/phoneholder.py
msgid "phone_depth"
msgstr ""
#. help for parameter phone_depth
#: boxes/generators/phoneholder.py
msgid ""
"Depth of the phone. Used by the bottom support holding the phone, and the "
"side tabs depth as well. Should be at least your material thickness for "
"assembly reasons."
msgstr ""
#. help for parameter angle
#: boxes/generators/phoneholder.py
msgid "angle at which the phone stands, in degrees. 0° is vertical."
msgstr ""
#. help for parameter bottom_margin
#: boxes/generators/phoneholder.py
msgid "Height of the support below the phone"
msgstr ""
#. parameter name
#: boxes/generators/phoneholder.py
msgid "tab_size"
msgstr ""
#. help for parameter tab_size
#: boxes/generators/phoneholder.py
msgid "Length of the tabs holding the phone"
msgstr ""
#. parameter name
#: boxes/generators/phoneholder.py
msgid "bottom_support_spacing"
msgstr ""
#. help for parameter bottom_support_spacing
#: boxes/generators/phoneholder.py
msgid ""
"Spacing between the two bottom support. Choose a value big enough for the "
"charging cable, without getting in the way of other ports."
msgstr ""
#. name of box generator
#: boxes/generators/planetary.py
msgid "Planetary"
msgstr ""
#. description of Planetary
#: boxes/generators/planetary.py
msgid "Planetary Gear with possibly multiple identical stages"
msgstr ""
msgid "Planetary Settings"
msgstr ""
#. parameter name
#: boxes/generators/planetary.py
msgid "sunteeth"
msgstr ""
#. help for parameter sunteeth
#: boxes/generators/planetary.py
msgid "number of teeth on sun gear"
msgstr ""
#. parameter name
#: boxes/generators/planetary.py
msgid "planetteeth"
msgstr ""
#. help for parameter planetteeth
#: boxes/generators/planetary.py
msgid "number of teeth on planets"
msgstr ""
#. parameter name
#: boxes/generators/planetary.py
msgid "maxplanets"
msgstr ""
#. help for parameter maxplanets
#: boxes/generators/planetary.py
msgid "limit the number of planets (0 for as much as fit)"
msgstr ""
#. parameter name
#: boxes/generators/planetary.py
msgid "deltateeth"
msgstr ""
#. help for parameter deltateeth
#: boxes/generators/planetary.py
msgid "enable secondary ring with given delta to the ring gear"
msgstr ""
#. help for parameter modulus
#: boxes/generators/planetary.py
msgid "modulus of the theeth in mm"
msgstr ""
#. name of box generator
#: boxes/generators/planetary2.py
msgid "Planetary2"
msgstr ""
#. description of Planetary2
#: boxes/generators/planetary2.py
msgid "Balanced force Difference Planetary Gear (not yet working properly)"
msgstr ""
#. long description of Planetary2 in markdown
#: boxes/generators/planetary2.py
msgid ""
"Still has issues. The middle planetary gears set must not have a mashing sun "
"gear as it can't be a proper gear set."
msgstr ""
msgid "Planetary2 Settings"
msgstr ""
#. parameter name
#: boxes/generators/planetary2.py
msgid "profile"
msgstr ""
#. help for parameter profile
#: boxes/generators/planetary2.py
msgid "profile of the teeth/belt"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "40DP"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "AT5"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "GT2_2mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "GT2_3mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "GT2_5mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "H"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "HTD_3mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "HTD_5mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "HTD_8mm"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "MXL"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "T10"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "T2_5"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "T5"
msgstr ""
#. possible choice for profile
#: boxes/generators/planetary2.py
msgid "XL"
msgstr ""
#. parameter name
#: boxes/generators/planetary2.py
msgid "screw1"
msgstr ""
#. help for parameter screw1
#: boxes/generators/planetary2.py
msgid "diameter of lower part of the screw hole"
msgstr ""
#. parameter name
#: boxes/generators/planetary2.py
msgid "screw2"
msgstr ""
#. help for parameter screw2
#: boxes/generators/planetary2.py
msgid "diameter of upper part of the screw hole"
msgstr ""
#. parameter name
#: boxes/generators/planetary2.py
msgid "pinsize"
msgstr ""
#. help for parameter pinsize
#: boxes/generators/planetary2.py
msgid "diameter of alignment pins"
msgstr ""
#. name of box generator
#: boxes/generators/platonic.py
msgid "Platonic"
msgstr ""
#. description of Platonic
#: boxes/generators/platonic.py
msgid "Platonic solids generator"
msgstr ""
#. long description of Platonic in markdown
#: boxes/generators/platonic.py
msgid "![Icosahedron](static/samples/Platonic-Icosahedron.jpg)\n"
msgstr ""
msgid "Platonic Settings"
msgstr ""
#. parameter name
#: boxes/generators/platonic.py
msgid "type"
msgstr ""
#. help for parameter type
#: boxes/generators/platonic.py
msgid "type of platonic solid"
msgstr ""
#. possible choice for type
#: boxes/generators/platonic.py
msgid "tetrahedron"
msgstr ""
#. possible choice for type
#: boxes/generators/platonic.py
msgid "cube"
msgstr ""
#. possible choice for type
#: boxes/generators/platonic.py
msgid "octahedron"
msgstr ""
#. possible choice for type
#: boxes/generators/platonic.py
msgid "dodecahedron"
msgstr ""
#. possible choice for type
#: boxes/generators/platonic.py
msgid "icosahedro"
msgstr ""
#. name of box generator
#: boxes/generators/polehook.py
msgid "PoleHook"
msgstr ""
#. description of PoleHook
#: boxes/generators/polehook.py
msgid "Hook for pole like things to be clamped to another pole"
msgstr ""
msgid "PoleHook Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/polehook.py
msgid "diameter of the thing to hook"
msgstr ""
#. parameter name
#: boxes/generators/polehook.py
msgid "screw"
msgstr ""
#. help for parameter screw
#: boxes/generators/polehook.py
msgid "diameter of the screw in mm"
msgstr ""
#. parameter name
#: boxes/generators/polehook.py
msgid "screwhead"
msgstr ""
#. help for parameter screwhead
#: boxes/generators/polehook.py
msgid "with of the screw head in mm"
msgstr ""
#. parameter name
#: boxes/generators/polehook.py
msgid "screwheadheight"
msgstr ""
#. help for parameter screwheadheight
#: boxes/generators/polehook.py
msgid "height of the screw head in mm"
msgstr ""
#. parameter name
#: boxes/generators/polehook.py
msgid "pin"
msgstr ""
#. help for parameter pin
#: boxes/generators/polehook.py
msgid "diameter of the pin in mm"
msgstr ""
#. name of box generator
#: boxes/generators/portmanteau.py
msgid "Portmanteau"
msgstr ""
#. description of Portmanteau
#: boxes/generators/portmanteau.py
msgid ""
"Portmanteau - as in a piece of luggage that open into two equal parts. \n"
" Generates parts for one half of a case with a handle at the top"
msgstr ""
msgid "Portmanteau Settings"
msgstr ""
#. parameter name
#: boxes/generators/portmanteau.py
msgid "handle_height"
msgstr ""
#. help for parameter handle_height
#: boxes/generators/portmanteau.py
msgid "distance handle extends past the edge"
msgstr ""
#. parameter name
#: boxes/generators/portmanteau.py
msgid "grip_width"
msgstr ""
#. help for parameter grip_width
#: boxes/generators/portmanteau.py
msgid "width of the handle hole"
msgstr ""
#. parameter name
#: boxes/generators/portmanteau.py
msgid "grip_height"
msgstr ""
#. help for parameter grip_height
#: boxes/generators/portmanteau.py
msgid "height of the handle hole"
msgstr ""
#. name of box generator
#: boxes/generators/pulley.py
msgid "Pulley"
msgstr ""
#. description of Pulley
#: boxes/generators/pulley.py
msgid "Timing belt pulleys for different profiles"
msgstr ""
msgid "Pulley Settings"
msgstr ""
#. parameter name
#: boxes/generators/pulley.py
msgid "teeth"
msgstr ""
#. help for parameter axle
#: boxes/generators/pulley.py
msgid "diameter of the axle"
msgstr ""
#. parameter name
#: boxes/generators/pulley.py
msgid "insideout"
msgstr ""
#. help for parameter insideout
#: boxes/generators/pulley.py
msgid "create a ring gear with the belt being pushed against from within"
msgstr ""
#. help for parameter top
#: boxes/generators/pulley.py
msgid "overlap of top rim (zero for none)"
msgstr ""
#. name of box generator
#: boxes/generators/rack19box.py
msgid "Rack19Box"
msgstr ""
#. description of Rack19Box
#: boxes/generators/rack19box.py
msgid "Closed box with screw on top for mounting in a 19\" rack."
msgstr ""
msgid "Rack19Box Settings"
msgstr ""
#. help for parameter height
#: boxes/generators/rack19box.py
msgid "height in rack units"
msgstr ""
#. name of box generator
#: boxes/generators/rack10box.py
msgid "Rack10Box"
msgstr ""
#. description of Rack10Box
#: boxes/generators/rack10box.py
msgid "Closed box with screw on top for mounting in a 10\" rack."
msgstr ""
msgid "Rack10Box Settings"
msgstr ""
#. name of box generator
#: boxes/generators/rack19halfwidth.py
msgid "Rack19HalfWidth"
msgstr ""
#. description of Rack19HalfWidth
#: boxes/generators/rack19halfwidth.py
msgid "Half width 19inch rack unit for musical equipment."
msgstr ""
msgid "Rack19HalfWidth Settings"
msgstr ""
#. parameter name
#: boxes/generators/rack19halfwidth.py
msgid "ru_count"
msgstr ""
#. help for parameter ru_count
#: boxes/generators/rack19halfwidth.py
msgid "number of rack units"
msgstr ""
#. help for parameter holes
#: boxes/generators/rack19halfwidth.py
msgid ""
"mounting patterns: x=xlr, m=midi, p=9v-power, w=6.5mm-wire, space=next row"
msgstr ""
#. help for parameter z
#: boxes/generators/rack19halfwidth.py
msgid "depth of the shorter (rackear) side"
msgstr ""
#. parameter name
#: boxes/generators/rack19halfwidth.py
msgid "deepz"
msgstr ""
#. help for parameter deepz
#: boxes/generators/rack19halfwidth.py
msgid "depth of the longer (screwed to another half sized thing) side"
msgstr ""
#. name of box generator
#: boxes/generators/rackbox.py
msgid "RackBox"
msgstr ""
msgid "RackBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/rectangularWall.py
msgid "RectangularWall"
msgstr ""
#. description of RectangularWall
#: boxes/generators/rectangularWall.py
msgid "Simple wall"
msgstr ""
msgid "RectangularWall Settings"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "C"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "D"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "I"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "j"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "J"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "K"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "l"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "m"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "M"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "N"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "o"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "O"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "p"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "P"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "q"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "Q"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "R"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "u"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "U"
msgstr ""
#. possible choice for bottom_edge
#: boxes/generators/rectangularWall.py
msgid "V"
msgstr ""
#. parameter name
#: boxes/generators/rectangularWall.py
msgid "right_edge"
msgstr ""
#. help for parameter right_edge
#: boxes/generators/rectangularWall.py
msgid "edge type for right edge"
msgstr ""
#. parameter name
#: boxes/generators/rectangularWall.py
msgid "left_edge"
msgstr ""
#. help for parameter left_edge
#: boxes/generators/rectangularWall.py
msgid "edge type for left edge"
msgstr ""
msgid "Settings for rack (and pinion) edge"
msgstr ""
#. help for parameter angle
#: boxes/generators/rectangularWall.py
msgid "pressure angle"
msgstr ""
#. parameter name for Gear
#: boxes/generators/rectangularWall.py
msgid "clearance"
msgstr ""
#. parameter name for Gear
#: boxes/generators/rectangularWall.py
msgid "dimension"
msgstr ""
#. help for parameter dimension
#: boxes/generators/rectangularWall.py
msgid "modulus of the gear (in mm)"
msgstr ""
#. help for parameter profile_shift
#: boxes/generators/rectangularWall.py
msgid "Profile shift"
msgstr ""
msgid "Settings for GrippingEdge"
msgstr ""
#. help for parameter outset
#: boxes/generators/rectangularWall.py
msgid "extend outward the straight edge"
msgstr ""
#. help for parameter style
#: boxes/generators/rectangularWall.py
msgid "\"wave\" or \"bumps\""
msgstr ""
#. possible choice for style
#: boxes/generators/rectangularWall.py
msgid "wave"
msgstr ""
#. possible choice for style
#: boxes/generators/rectangularWall.py
msgid "bumps"
msgstr ""
#. help for parameter depth
#: boxes/generators/rectangularWall.py
msgid "depth of the grooves"
msgstr ""
#. name of box generator
#: boxes/generators/regularbox.py
msgid "RegularBox"
msgstr ""
#. description of RegularBox
#: boxes/generators/regularbox.py
msgid "Box with regular polygon as base"
msgstr ""
#. long description of RegularBox in markdown
#: boxes/generators/regularbox.py
msgid ""
"For short side walls that don't fit a connecting finger reduce "
"*surroundingspaces* and *finger* in the Finger Joint Settings.\n"
"\n"
"The lids needs to be glued. For the bayonet lid all outside rings attach to "
"the bottom, all inside rings to the top.\n"
msgstr ""
msgid "RegularBox Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/regularbox.py
msgid "inner radius if the box (at the corners)"
msgstr ""
#. help for parameter n
#: boxes/generators/regularbox.py
msgid "number of sides"
msgstr ""
#. possible choice for top
#: boxes/generators/regularbox.py
msgid "round lid"
msgstr ""
#. possible choice for top
#: boxes/generators/regularbox.py
msgid "bayonet mount"
msgstr ""
#. help for parameter alignment_pins
#: boxes/generators/regularbox.py
msgid "diameter of the alignment pins for bayonet lid"
msgstr ""
#. name of box generator
#: boxes/generators/regularstarbox.py
msgid "RegularStarBox"
msgstr ""
#. description of RegularStarBox
#: boxes/generators/regularstarbox.py
msgid "Regular polygon boxes that form a star when closed"
msgstr ""
#. long description of RegularStarBox in markdown
#: boxes/generators/regularstarbox.py
msgid "![Open box](static/samples/RegularStarBox-2.jpg)"
msgstr ""
msgid "RegularStarBox Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/regularstarbox.py
msgid "inner radius if the box (center to corners)"
msgstr ""
#. name of box generator
#: boxes/generators/robotarm.py
msgid "RobotArm"
msgstr ""
#. description of RobotArm
#: boxes/generators/robotarm.py
msgid "Segments of servo powered robot arm"
msgstr ""
msgid "RobotArm Settings"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "type1"
msgstr ""
#. help for parameter type1
#: boxes/generators/robotarm.py
msgid "type of arm segment"
msgstr ""
#. possible choice for type1
#: boxes/generators/robotarm.py
msgid "RobotArmMM"
msgstr ""
#. possible choice for type1
#: boxes/generators/robotarm.py
msgid "RobotArmMm"
msgstr ""
#. possible choice for type1
#: boxes/generators/robotarm.py
msgid "RobotArmUU"
msgstr ""
#. possible choice for type1
#: boxes/generators/robotarm.py
msgid "RobotArmUu"
msgstr ""
#. possible choice for type1
#: boxes/generators/robotarm.py
msgid "RobotArmMu"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo1a"
msgstr ""
#. help for parameter servo1a
#: boxes/generators/robotarm.py
msgid "type of servo to use"
msgstr ""
#. possible choice for servo1a
#: boxes/generators/robotarm.py
msgid "Servo9g"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo1b"
msgstr ""
#. help for parameter servo1b
#: boxes/generators/robotarm.py
msgid "type of servo to use on second side (if different is supported)"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "length1"
msgstr ""
#. help for parameter length1
#: boxes/generators/robotarm.py
msgid "length of segment axle to axle"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "type2"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo2a"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo2b"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "length2"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "type3"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo3a"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo3b"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "length3"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "type4"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo4a"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo4b"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "length4"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "type5"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo5a"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "servo5b"
msgstr ""
#. parameter name
#: boxes/generators/robotarm.py
msgid "length5"
msgstr ""
#. name of box generator
#: boxes/generators/rotary.py
msgid "Rotary"
msgstr ""
#. description of Rotary
#: boxes/generators/rotary.py
msgid "Rotary Attachment for engraving cylindrical objects in a laser cutter"
msgstr ""
msgid "Rotary Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/rotary.py
msgid "outer diameter of the wheels (including O rings)"
msgstr ""
#. parameter name
#: boxes/generators/rotary.py
msgid "rubberthickness"
msgstr ""
#. help for parameter rubberthickness
#: boxes/generators/rotary.py
msgid "diameter of the strings of the O rings"
msgstr ""
#. help for parameter axle
#: boxes/generators/rotary.py
msgid "diameter of the axles"
msgstr ""
#. parameter name
#: boxes/generators/rotary.py
msgid "knifethickness"
msgstr ""
#. help for parameter knifethickness
#: boxes/generators/rotary.py
msgid "thickness of the knives in mm. Use 0 for use with honey comb table."
msgstr ""
#. parameter name
#: boxes/generators/rotary.py
msgid "beamwidth"
msgstr ""
#. help for parameter beamwidth
#: boxes/generators/rotary.py
msgid "width of the (aluminium) profile connecting the parts"
msgstr ""
#. parameter name
#: boxes/generators/rotary.py
msgid "beamheight"
msgstr ""
#. help for parameter beamheight
#: boxes/generators/rotary.py
msgid "height of the (aluminium) profile connecting the parts"
msgstr ""
#. name of box generator
#: boxes/generators/roundedbox.py
msgid "RoundedBox"
msgstr ""
#. description of RoundedBox
#: boxes/generators/roundedbox.py
msgid "Box with vertical edges rounded"
msgstr ""
#. long description of RoundedBox in markdown
#: boxes/generators/roundedbox.py
msgid ""
"\n"
"Default: edge_style = f Finger Joint:\n"
"![Finger Joint](static/samples/RoundedBox-2.jpg)\n"
"\n"
"Alternative: edge_style = h Edge (parallel Finger Joint Holes):\n"
"![Finger Joint Holes](static/samples/RoundedBox-3.jpg)\n"
"\n"
"With lid:\n"
msgstr ""
msgid "RoundedBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/roundedbox.py
msgid "wallpieces"
msgstr ""
#. help for parameter wallpieces
#: boxes/generators/roundedbox.py
msgid "number of pieces for outer wall"
msgstr ""
#. parameter name
#: boxes/generators/roundedbox.py
msgid "edge_style"
msgstr ""
#. help for parameter edge_style
#: boxes/generators/roundedbox.py
msgid "edge type for top and bottom edges"
msgstr ""
#. name of box generator
#: boxes/generators/royalgame.py
msgid "RoyalGame"
msgstr ""
#. description of RoyalGame
#: boxes/generators/royalgame.py
msgid "The Royal Game of Ur"
msgstr ""
#. long description of RoyalGame in markdown
#: boxes/generators/royalgame.py
msgid ""
"Most of the blue lines need to be engraved by cutting with high speed and "
"low power. But there are three blue holes that actually need to be cut: The "
"grip hole in the lid and two tiny rectangles on the top and bottom for the "
"lid to grip into.\n"
"\n"
"![Lid Details](static/samples/RoyalGame-2.jpg)\n"
"\n"
"![All pieces](static/samples/RoyalGame-3.jpg)\n"
"\n"
msgstr ""
msgid "RoyalGame Settings"
msgstr ""
#. name of box generator
#: boxes/generators/shutterbox.py
msgid "ShutterBox"
msgstr ""
#. description of ShutterBox
#: boxes/generators/shutterbox.py
msgid "Box with a rolling shutter made of flex"
msgstr ""
#. long description of ShutterBox in markdown
#: boxes/generators/shutterbox.py
msgid ""
"Beware of the rolling shutter effect! Use wax on sliding surfaces.\n"
"\n"
"![Inside](static/samples/ShutterBox-3.jpg)\n"
"\n"
"![Detail](static/samples/ShutterBox-2.jpg)\n"
msgstr ""
msgid "ShutterBox Settings"
msgstr ""
#. help for parameter style
#: boxes/generators/shutterbox.py
msgid "Number of rounded top corners"
msgstr ""
#. possible choice for style
#: boxes/generators/shutterbox.py
msgid "single"
msgstr ""
#. name of box generator
#: boxes/generators/sidedoorhousing.py
msgid "SideDoorHousing"
msgstr ""
#. description of SideDoorHousing
#: boxes/generators/sidedoorhousing.py
msgid "A box with service hatches at the sides"
msgstr ""
#. long description of SideDoorHousing in markdown
#: boxes/generators/sidedoorhousing.py
msgid ""
"\n"
"This box is designed as a housing for electronic projects. It has hatches "
"that can be re-opened with simple tools. It intentionally cannot be opened "
"with bare hands - if build with thin enough material. The hatches are at the "
"x sides.\n"
"\n"
"#### Assembly instructions\n"
"The main body is easy to assemble by starting with the floor and then adding "
"the four walls and the top piece.\n"
"\n"
"For the removable walls you need to add the lips and latches. The U-shaped "
"clamps holding the latches in place need to be clued in place without also "
"gluing the latches themselves. Make sure the springs on the latches point "
"inwards and the angled ends point to the side walls as shown here (showing a "
"different box type):\n"
"\n"
"![Wall details](static/samples/Console2-backwall-detail.jpg)\n"
"\n"
"#### Re-Opening\n"
"\n"
"The latches lock in place when closed. To open them they need to be pressed "
"in and can then be moved aside.\n"
msgstr ""
msgid "SideDoorHousing Settings"
msgstr ""
#. parameter name
#: boxes/generators/sidedoorhousing.py
msgid "double_door"
msgstr ""
#. help for parameter double_door
#: boxes/generators/sidedoorhousing.py
msgid "allow removing the backwall, too"
msgstr ""
#. name of box generator
#: boxes/generators/silverwarebox.py
msgid "Silverware"
msgstr ""
#. description of Silverware
#: boxes/generators/silverwarebox.py
msgid ""
"\n"
" Cuttlery stand with carrying grip\n"
" using flex for rounded corners\n"
" "
msgstr ""
msgid "Silverware Settings"
msgstr ""
#. parameter name
#: boxes/generators/silverwarebox.py
msgid "cornerradius"
msgstr ""
#. help for parameter cornerradius
#: boxes/generators/silverwarebox.py
msgid "Radius of the corners"
msgstr ""
#. parameter name
#: boxes/generators/silverwarebox.py
msgid "handleheight"
msgstr ""
#. help for parameter handleheight
#: boxes/generators/silverwarebox.py
msgid "Height of the handle"
msgstr ""
#. parameter name
#: boxes/generators/silverwarebox.py
msgid "handlewidth"
msgstr ""
#. help for parameter handlewidth
#: boxes/generators/silverwarebox.py
msgid "Width of the handle"
msgstr ""
#. name of box generator
#: boxes/generators/slidingdrawer.py
msgid "SlidingDrawer"
msgstr ""
#. description of SlidingDrawer
#: boxes/generators/slidingdrawer.py
msgid "Sliding drawer box"
msgstr ""
msgid "SlidingDrawer Settings"
msgstr ""
#. help for parameter play
#: boxes/generators/slidingdrawer.py
msgid "play between the two parts as multiple of the wall thickness"
msgstr ""
#. name of box generator
#: boxes/generators/smallpartstray.py
msgid "SmallPartsTray"
msgstr ""
msgid "SmallPartsTray Settings"
msgstr ""
#. help for parameter angle
#: boxes/generators/smallpartstray.py
msgid "angle of the ramps"
msgstr ""
#. parameter name
#: boxes/generators/smallpartstray.py
msgid "rampheight"
msgstr ""
#. help for parameter rampheight
#: boxes/generators/smallpartstray.py
msgid "height of the ramps relative to to total height"
msgstr ""
#. parameter name
#: boxes/generators/smallpartstray.py
msgid "two_sided"
msgstr ""
#. help for parameter two_sided
#: boxes/generators/smallpartstray.py
msgid "have ramps on both sides"
msgstr ""
#. parameter name
#: boxes/generators/smallpartstray.py
msgid "front_panel"
msgstr ""
#. help for parameter front_panel
#: boxes/generators/smallpartstray.py
msgid "have a vertical wall at the ramp"
msgstr ""
#. name of box generator
#: boxes/generators/spicesrack.py
msgid "SpicesRack"
msgstr ""
#. description of SpicesRack
#: boxes/generators/spicesrack.py
msgid "Rack for cans of spices"
msgstr ""
msgid "SpicesRack Settings"
msgstr ""
#. help for parameter diameter
#: boxes/generators/spicesrack.py
msgid "diameter of spice cans"
msgstr ""
#. help for parameter height
#: boxes/generators/spicesrack.py
msgid "height of the cans that needs to be supported"
msgstr ""
#. help for parameter space
#: boxes/generators/spicesrack.py
msgid "space between cans"
msgstr ""
#. parameter name
#: boxes/generators/spicesrack.py
msgid "numx"
msgstr ""
#. help for parameter numx
#: boxes/generators/spicesrack.py
msgid "number of cans in a row"
msgstr ""
#. parameter name
#: boxes/generators/spicesrack.py
msgid "numy"
msgstr ""
#. help for parameter numy
#: boxes/generators/spicesrack.py
msgid "number of cans in a column"
msgstr ""
#. parameter name
#: boxes/generators/spicesrack.py
msgid "in_place_supports"
msgstr ""
#. help for parameter in_place_supports
#: boxes/generators/spicesrack.py
msgid "place supports pieces in holes (check for fit yourself)"
msgstr ""
#. parameter name
#: boxes/generators/spicesrack.py
msgid "feet"
msgstr ""
#. help for parameter feet
#: boxes/generators/spicesrack.py
msgid "add feet so the rack can stand on the ground"
msgstr ""
#. name of box generator
#: boxes/generators/stachel.py
msgid "Stachel"
msgstr ""
#. description of Stachel
#: boxes/generators/stachel.py
msgid "Bass Recorder Endpin"
msgstr ""
msgid "Stachel Settings"
msgstr ""
#. parameter name
#: boxes/generators/stachel.py
msgid "flutediameter"
msgstr ""
#. help for parameter flutediameter
#: boxes/generators/stachel.py
msgid "diameter of the flutes bottom in mm"
msgstr ""
#. parameter name
#: boxes/generators/stachel.py
msgid "polediameter"
msgstr ""
#. help for parameter polediameter
#: boxes/generators/stachel.py
msgid "diameter if the pin in mm"
msgstr ""
#. parameter name
#: boxes/generators/stachel.py
msgid "wall"
msgstr ""
#. help for parameter wall
#: boxes/generators/stachel.py
msgid "width of the surrounding wall in mm"
msgstr ""
#. name of box generator
#: boxes/generators/storagerack.py
msgid "StorageRack"
msgstr ""
#. description of StorageRack
#: boxes/generators/storagerack.py
msgid "StorageRack to store boxes and trays which have their own floor"
msgstr ""
#. long description of StorageRack in markdown
#: boxes/generators/storagerack.py
msgid ""
"\n"
"\n"
"Drawers are not included:\n"
"\n"
"![Inside](static/samples/StorageRack-2.jpg)\n"
"![Back wall details](static/samples/StorageRack-3.jpg)\n"
"\n"
msgstr ""
msgid "StorageRack Settings"
msgstr ""
#. help for parameter depth
#: boxes/generators/storagerack.py
msgid "depth of the rack"
msgstr ""
#. parameter name
#: boxes/generators/storagerack.py
msgid "rail"
msgstr ""
#. name of box generator
#: boxes/generators/storageshelf.py
msgid "StorageShelf"
msgstr ""
#. description of StorageShelf
#: boxes/generators/storageshelf.py
msgid "StorageShelf can be used to store Typetray"
msgstr ""
#. long description of StorageShelf in markdown
#: boxes/generators/storageshelf.py
msgid "This is a simple shelf box."
msgstr ""
msgid "StorageShelf Settings"
msgstr ""
#. parameter name
#: boxes/generators/storageshelf.py
msgid "retainer"
msgstr ""
#. help for parameter retainer
#: boxes/generators/storageshelf.py
msgid "height of retaining wall at the front edges"
msgstr ""
#. parameter name
#: boxes/generators/storageshelf.py
msgid "retainer_hole_edge"
msgstr ""
#. help for parameter retainer_hole_edge
#: boxes/generators/storageshelf.py
msgid "use finger hole edge for retainer walls"
msgstr ""
#. name of box generator
#: boxes/generators/texttest.py
msgid "TextTest"
msgstr ""
msgid "TextTest Settings"
msgstr ""
#. name of box generator
#: boxes/generators/thirdhand.py
msgid "ThirdHand"
msgstr ""
msgid "ThirdHand Settings"
msgstr ""
#. parameter name
#: boxes/generators/thirdhand.py
msgid "ball_diameter"
msgstr ""
#. help for parameter ball_diameter
#: boxes/generators/thirdhand.py
msgid "Diameter of the ball in the ball joints"
msgstr ""
#. help for parameter length
#: boxes/generators/thirdhand.py
msgid "length between center of ball joints or to the end"
msgstr ""
#. name of box generator
#: boxes/generators/trafficlight.py
msgid "TrafficLight"
msgstr ""
#. description of TrafficLight
#: boxes/generators/trafficlight.py
msgid "Traffic light"
msgstr ""
#. long description of TrafficLight in markdown
#: boxes/generators/trafficlight.py
msgid ""
"The traffic light was created to visualize the status of a Icinga monitored "
"system.\n"
"\n"
"When turned by 90°, it can be also used to create a bottle holder."
msgstr ""
msgid "TrafficLight Settings"
msgstr ""
#. help for parameter depth
#: boxes/generators/trafficlight.py
msgid "inner depth not including the shades"
msgstr ""
#. parameter name
#: boxes/generators/trafficlight.py
msgid "shades"
msgstr ""
#. help for parameter shades
#: boxes/generators/trafficlight.py
msgid "depth of the shaders"
msgstr ""
#. help for parameter n
#: boxes/generators/trafficlight.py
msgid "number of lights"
msgstr ""
#. parameter name
#: boxes/generators/trafficlight.py
msgid "upright"
msgstr ""
#. help for parameter upright
#: boxes/generators/trafficlight.py
msgid "stack lights upright (or side by side)"
msgstr ""
#. name of box generator
#: boxes/generators/trayinsert.py
msgid "TrayInsert"
msgstr ""
#. description of TrayInsert
#: boxes/generators/trayinsert.py
msgid ""
"Tray insert without floor and outer walls - allows only continuous walls"
msgstr ""
msgid "TrayInsert Settings"
msgstr ""
#. name of box generator
#: boxes/generators/traylayout.py
msgid "TrayLayout"
msgstr ""
#. description of TrayLayout
#: boxes/generators/traylayout.py
msgid "Generate a typetray from a layout file"
msgstr ""
#. long description of TrayLayout in markdown
#: boxes/generators/traylayout.py
msgid ""
"This is a two step process. The layout is based on a grid\n"
"of sizes in x and y direction. Choose how many distances you need in both "
"directions. The actual sizes and all other settings can be entered in the "
"second step."
msgstr ""
msgid "options"
msgstr ""
#. help for parameter x
#: boxes/generators/traylayout.py
msgid "number of compartments side by side"
msgstr ""
#. help for parameter y
#: boxes/generators/traylayout.py
msgid "number of compartments back to front"
msgstr ""
#. name of box generator
#: boxes/generators/traylayout.py
msgid "TrayLayout2"
msgstr ""
#. long description of TrayLayout2 in markdown
#: boxes/generators/traylayout.py
msgid ""
"Edit the layout text graphics to adjust your tray.\n"
"Put in the sizes for each column and row. You can replace the hyphens and\n"
"vertical bars representing the walls with a space character to remove the "
"walls.\n"
"You can replace the space characters representing the floor by a \"X\" to "
"remove the floor for this compartment.\n"
msgstr ""
msgid "TrayLayout2 Settings"
msgstr ""
#. name of box generator
#: boxes/generators/trianglelamp.py
msgid "TriangleLamp"
msgstr ""
#. description of TriangleLamp
#: boxes/generators/trianglelamp.py
msgid "Triangle LED Lamp"
msgstr ""
msgid "TriangleLamp Settings"
msgstr ""
#. parameter name
#: boxes/generators/trianglelamp.py
msgid "cornersize"
msgstr ""
#. help for parameter cornersize
#: boxes/generators/trianglelamp.py
msgid "short side of the corner triangles"
msgstr ""
#. parameter name
#: boxes/generators/trianglelamp.py
msgid "screenholesize"
msgstr ""
#. help for parameter screenholesize
#: boxes/generators/trianglelamp.py
msgid "diameter of the holes in the screen"
msgstr ""
#. parameter name
#: boxes/generators/trianglelamp.py
msgid "screwholesize"
msgstr ""
#. help for parameter screwholesize
#: boxes/generators/trianglelamp.py
msgid "diameter of the holes in the wood"
msgstr ""
#. parameter name
#: boxes/generators/trianglelamp.py
msgid "sharpcorners"
msgstr ""
#. help for parameter sharpcorners
#: boxes/generators/trianglelamp.py
msgid "extend walls for 45° corners. Requires grinding a 22.5° bevel."
msgstr ""
#. name of box generator
#: boxes/generators/two_piece.py
msgid "TwoPiece"
msgstr ""
#. description of TwoPiece
#: boxes/generators/two_piece.py
msgid ""
"A two piece box where top slips over the bottom half to form \n"
" the enclosure.\n"
" "
msgstr ""
#. long description of TwoPiece in markdown
#: boxes/generators/two_piece.py
msgid ""
"\n"
"Set *hi* larger than *h* to leave gap between the inner and outer shell. "
"This can be used to make opening the box easier. Set *hi* smaller to only "
"have a small inner ridge that will allow the content to be more visible "
"after opening.\n"
"\n"
"![Bottom view](static/samples/TwoPiece2.jpg)\n"
msgstr ""
msgid "TwoPiece Settings"
msgstr ""
#. name of box generator
#: boxes/generators/typetray.py
msgid "TypeTray"
msgstr ""
#. description of TypeTray
#: boxes/generators/typetray.py
msgid "Type tray - allows only continuous walls"
msgstr ""
msgid "TypeTray Settings"
msgstr ""
#. parameter name
#: boxes/generators/typetray.py
msgid "back_height"
msgstr ""
#. help for parameter back_height
#: boxes/generators/typetray.py
msgid "additional height of the back wall - e top edge only"
msgstr ""
#. help for parameter radius
#: boxes/generators/typetray.py
msgid "radius for strengthening side walls with back_height"
msgstr ""
#. parameter name
#: boxes/generators/typetray.py
msgid "gripheight"
msgstr ""
#. help for parameter gripheight
#: boxes/generators/typetray.py
msgid "height of the grip hole in mm"
msgstr ""
#. parameter name
#: boxes/generators/typetray.py
msgid "gripwidth"
msgstr ""
#. help for parameter gripwidth
#: boxes/generators/typetray.py
msgid "width of th grip hole in mm (zero for no hole)"
msgstr ""
#. help for parameter handle
#: boxes/generators/typetray.py
msgid "add handle to the bottom (changes bottom edge in the front)"
msgstr ""
#. name of box generator
#: boxes/generators/ubox.py
msgid "UBox"
msgstr ""
#. description of UBox
#: boxes/generators/ubox.py
msgid "Box various options for different stypes and lids"
msgstr ""
msgid "UBox Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/ubox.py
msgid "radius of bottom corners"
msgstr ""
#. help for parameter lid
#: boxes/generators/ubox.py
msgid "additional lid"
msgstr ""
#. possible choice for lid
#: boxes/generators/ubox.py
msgid "default (none)"
msgstr ""
#. possible choice for lid
#: boxes/generators/ubox.py
msgid "chest"
msgstr ""
#. name of box generator
#: boxes/generators/unevenheightbox.py
msgid "UnevenHeightBox"
msgstr ""
#. description of UnevenHeightBox
#: boxes/generators/unevenheightbox.py
msgid "Box with different height in each corner"
msgstr ""
msgid "UnevenHeightBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/unevenheightbox.py
msgid "height0"
msgstr ""
#. help for parameter height0
#: boxes/generators/unevenheightbox.py
msgid "height of the front left corner in mm"
msgstr ""
#. parameter name
#: boxes/generators/unevenheightbox.py
msgid "height1"
msgstr ""
#. help for parameter height1
#: boxes/generators/unevenheightbox.py
msgid "height of the front right corner in mm"
msgstr ""
#. parameter name
#: boxes/generators/unevenheightbox.py
msgid "height2"
msgstr ""
#. help for parameter height2
#: boxes/generators/unevenheightbox.py
msgid "height of the right back corner in mm"
msgstr ""
#. parameter name
#: boxes/generators/unevenheightbox.py
msgid "height3"
msgstr ""
#. help for parameter height3
#: boxes/generators/unevenheightbox.py
msgid "height of the left back corner in mm"
msgstr ""
#. help for parameter lid
#: boxes/generators/unevenheightbox.py
msgid "add a lid (works best with high corners opposing each other)"
msgstr ""
#. help for parameter lid_height
#: boxes/generators/unevenheightbox.py
msgid "additional height of the lid"
msgstr ""
#. parameter name
#: boxes/generators/unevenheightbox.py
msgid "edge_types"
msgstr ""
#. help for parameter edge_types
#: boxes/generators/unevenheightbox.py
msgid ""
"which edges are flat (e) or grooved (z,Z), counter-clockwise from the front"
msgstr ""
#. name of box generator
#: boxes/generators/universalbox.py
msgid "UniversalBox"
msgstr ""
#. description of UniversalBox
#: boxes/generators/universalbox.py
msgid "Box with various options for different styles and lids"
msgstr ""
msgid "UniversalBox Settings"
msgstr ""
#. parameter name
#: boxes/generators/universalbox.py
msgid "vertical_edges"
msgstr ""
#. help for parameter vertical_edges
#: boxes/generators/universalbox.py
msgid "connections used for the vertical edges"
msgstr ""
#. possible choice for vertical_edges
#: boxes/generators/universalbox.py
msgid "finger joints"
msgstr ""
#. possible choice for vertical_edges
#: boxes/generators/universalbox.py
msgid "finger holes"
msgstr ""
#. help for parameter lid
#: boxes/generators/universalbox.py
msgid "additional lid (for straight top_edge only)"
msgstr ""
#. name of box generator
#: boxes/generators/waivyknob.py
msgid "WaivyKnob"
msgstr ""
msgid "WaivyKnob Settings"
msgstr ""
#. parameter name
#: boxes/generators/waivyknob.py
msgid "serrationangle"
msgstr ""
#. help for parameter serrationangle
#: boxes/generators/waivyknob.py
msgid "higher values for deeper serrations (degrees)"
msgstr ""
#. name of box generator
#: boxes/generators/wallcaliperholder.py
msgid "WallCaliper"
msgstr ""
#. description of WallCaliper
#: boxes/generators/wallcaliperholder.py
msgid "Holds a single caliper to a wall"
msgstr ""
msgid "WallCaliper Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallcaliperholder.py
msgid "walltype"
msgstr ""
#. help for parameter walltype
#: boxes/generators/wallcaliperholder.py
msgid "Type of wall system to attach to"
msgstr ""
#. possible choice for walltype
#: boxes/generators/wallcaliperholder.py
msgid "plain"
msgstr ""
#. possible choice for walltype
#: boxes/generators/wallcaliperholder.py
msgid "plain reinforced"
msgstr ""
#. possible choice for walltype
#: boxes/generators/wallcaliperholder.py
msgid "slatwall"
msgstr ""
#. possible choice for walltype
#: boxes/generators/wallcaliperholder.py
msgid "dinrail"
msgstr ""
#. possible choice for walltype
#: boxes/generators/wallcaliperholder.py
msgid "french cleat"
msgstr ""
#. help for parameter width
#: boxes/generators/wallcaliperholder.py
msgid "width of the long end"
msgstr ""
#. help for parameter height
#: boxes/generators/wallcaliperholder.py
msgid "height of the body"
msgstr ""
msgid "Settings for plain WallEdges"
msgstr ""
msgid "Settings for SlatWallEdges"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "bottom_hook"
msgstr ""
#. help for parameter bottom_hook
#: boxes/generators/wallcaliperholder.py
msgid "\"spring\", \"stud\" or \"none\""
msgstr ""
#. possible choice for bottom_hook
#: boxes/generators/wallcaliperholder.py
msgid "hook"
msgstr ""
#. possible choice for bottom_hook
#: boxes/generators/wallcaliperholder.py
msgid "stud"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "hook_depth"
msgstr ""
#. help for parameter hook_depth
#: boxes/generators/wallcaliperholder.py
msgid "horizontal width of the hook"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "hook_distance"
msgstr ""
#. help for parameter hook_distance
#: boxes/generators/wallcaliperholder.py
msgid "horizontal space to the hook"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "hook_height"
msgstr ""
#. help for parameter hook_height
#: boxes/generators/wallcaliperholder.py
msgid "height of the horizontal bar of the hook"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "hook_overall_height"
msgstr ""
#. help for parameter hook_overall_height
#: boxes/generators/wallcaliperholder.py
msgid "height of the hook top to bottom"
msgstr ""
#. help for parameter pitch
#: boxes/generators/wallcaliperholder.py
msgid "vertical spacing of slots middle to middle (in mm)"
msgstr ""
#. parameter name for SlatWall
#: boxes/generators/wallcaliperholder.py
msgid "hook_extra_height"
msgstr ""
#. help for parameter hook_extra_height
#: boxes/generators/wallcaliperholder.py
msgid "space surrounding connectors (multiples of thickness)"
msgstr ""
msgid "Settings for DinRailEdges"
msgstr ""
#. help for parameter bottom
#: boxes/generators/wallcaliperholder.py
msgid "\"stud\" or \"none\""
msgstr ""
msgid "Settings for FrenchCleatEdges"
msgstr ""
#. help for parameter angle
#: boxes/generators/wallcaliperholder.py
msgid "angle of the cut (0 for horizontal)"
msgstr ""
#. help for parameter bottom
#: boxes/generators/wallcaliperholder.py
msgid "\"stud\", \"hook\" or \"none\""
msgstr ""
#. help for parameter depth
#: boxes/generators/wallcaliperholder.py
msgid "horizontal width of the hook in mm"
msgstr ""
#. help for parameter spacing
#: boxes/generators/wallcaliperholder.py
msgid "distance of the cleats in mm (for bottom hook)"
msgstr ""
#. name of box generator
#: boxes/generators/wallchiselholder.py
msgid "WallChiselHolder"
msgstr ""
#. description of WallChiselHolder
#: boxes/generators/wallchiselholder.py
msgid "Wall tool holder for chisels, files and similar tools"
msgstr ""
msgid "WallChiselHolder Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallchiselholder.py
msgid "tooldiameter"
msgstr ""
#. help for parameter tooldiameter
#: boxes/generators/wallchiselholder.py
msgid "diameter of the tool including space to grab"
msgstr ""
#. parameter name
#: boxes/generators/wallchiselholder.py
msgid "holediameter"
msgstr ""
#. help for parameter holediameter
#: boxes/generators/wallchiselholder.py
msgid "diameter of the hole for the tool (handle should not fit through)"
msgstr ""
#. parameter name
#: boxes/generators/wallchiselholder.py
msgid "slot_width"
msgstr ""
#. help for parameter slot_width
#: boxes/generators/wallchiselholder.py
msgid "width of slots"
msgstr ""
#. help for parameter radius
#: boxes/generators/wallchiselholder.py
msgid "radius at the slots"
msgstr ""
#. help for parameter number
#: boxes/generators/wallchiselholder.py
msgid "number of tools/slots"
msgstr ""
#. parameter name
#: boxes/generators/wallchiselholder.py
msgid "hooks"
msgstr ""
#. help for parameter hooks
#: boxes/generators/wallchiselholder.py
msgid "amount of hooks / braces"
msgstr ""
#. possible choice for hooks
#: boxes/generators/wallchiselholder.py
msgid "all"
msgstr ""
#. possible choice for hooks
#: boxes/generators/wallchiselholder.py
msgid "odds"
msgstr ""
#. possible choice for hooks
#: boxes/generators/wallchiselholder.py
msgid "everythird"
msgstr ""
#. name of box generator
#: boxes/generators/wallconsole.py
msgid "WallConsole"
msgstr ""
#. description of WallConsole
#: boxes/generators/wallconsole.py
msgid "Outset and angled plate to mount stuff to"
msgstr ""
msgid "WallConsole Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallconsole.py
msgid "top_depth"
msgstr ""
#. help for parameter top_depth
#: boxes/generators/wallconsole.py
msgid "depth at the top"
msgstr ""
#. parameter name
#: boxes/generators/wallconsole.py
msgid "bottom_depth"
msgstr ""
#. help for parameter bottom_depth
#: boxes/generators/wallconsole.py
msgid "depth at the bottom"
msgstr ""
#. name of box generator
#: boxes/generators/walldrillbox.py
msgid "WallDrillBox"
msgstr ""
#. description of WallDrillBox
#: boxes/generators/walldrillbox.py
msgid "Box for drills with each compartment with a different height"
msgstr ""
msgid "WallDrillBox Settings"
msgstr ""
#. name of box generator
#: boxes/generators/walledges.py
msgid "WallEdges"
msgstr ""
#. description of WallEdges
#: boxes/generators/walledges.py
msgid "Shows the different edge types for wall systems"
msgstr ""
msgid "WallEdges Settings"
msgstr ""
#. name of box generator
#: boxes/generators/wallpinrow.py
msgid "WallPinRow"
msgstr ""
msgid "WallPinRow Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallpinrow.py
msgid "pins"
msgstr ""
#. help for parameter pins
#: boxes/generators/wallpinrow.py
msgid "number of pins"
msgstr ""
#. parameter name
#: boxes/generators/wallpinrow.py
msgid "pinlength"
msgstr ""
#. help for parameter pinlength
#: boxes/generators/wallpinrow.py
msgid "length of pins (in mm)"
msgstr ""
#. help for parameter pinwidth
#: boxes/generators/wallpinrow.py
msgid "width of pins (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallpinrow.py
msgid "pinspacing"
msgstr ""
#. help for parameter pinspacing
#: boxes/generators/wallpinrow.py
msgid "space from middle to middle of pins (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallpinrow.py
msgid "pinspacing_increment"
msgstr ""
#. help for parameter pinspacing_increment
#: boxes/generators/wallpinrow.py
msgid "increase spacing from left to right (in mm)"
msgstr ""
#. help for parameter angle
#: boxes/generators/wallpinrow.py
msgid "angle of the pins pointing up (in degrees)"
msgstr ""
#. help for parameter hooks
#: boxes/generators/wallpinrow.py
msgid "number of hooks into the wall"
msgstr ""
#. help for parameter h
#: boxes/generators/wallpinrow.py
msgid ""
"height of the front plate (in mm) - needs to be at least 7 time the thickness"
msgstr ""
#. name of box generator
#: boxes/generators/wallplaneholder.py
msgid "WallPlaneHolder"
msgstr ""
#. description of WallPlaneHolder
#: boxes/generators/wallplaneholder.py
msgid "Hold a plane to a wall"
msgstr ""
msgid "WallPlaneHolder Settings"
msgstr ""
#. help for parameter width
#: boxes/generators/wallplaneholder.py
msgid "width of the plane"
msgstr ""
#. help for parameter length
#: boxes/generators/wallplaneholder.py
msgid "length of the plane"
msgstr ""
#. parameter name
#: boxes/generators/wallplaneholder.py
msgid "hold_length"
msgstr ""
#. help for parameter hold_length
#: boxes/generators/wallplaneholder.py
msgid "length of the part holding the plane over the front"
msgstr ""
#. help for parameter height
#: boxes/generators/wallplaneholder.py
msgid "height of the front of plane"
msgstr ""
#. name of box generator
#: boxes/generators/wallpliersholder.py
msgid "WallPliersHolder"
msgstr ""
#. description of WallPliersHolder
#: boxes/generators/wallpliersholder.py
msgid "Bar to hang pliers on"
msgstr ""
msgid "WallPliersHolder Settings"
msgstr ""
#. help for parameter angle
#: boxes/generators/wallpliersholder.py
msgid "bracing angle - less for more bracing"
msgstr ""
#. name of box generator
#: boxes/generators/wallslottedholder.py
msgid "WallSlottedHolder"
msgstr ""
#. description of WallSlottedHolder
#: boxes/generators/wallslottedholder.py
msgid "Wall tool holder with slots"
msgstr ""
msgid "WallSlottedHolder Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallslottedholder.py
msgid "slot_depth"
msgstr ""
#. help for parameter slot_depth
#: boxes/generators/wallslottedholder.py
msgid "depth of slots from the front"
msgstr ""
#. parameter name
#: boxes/generators/wallslottedholder.py
msgid "additional_depth"
msgstr ""
#. help for parameter additional_depth
#: boxes/generators/wallslottedholder.py
msgid "depth behind the lots"
msgstr ""
#. parameter name
#: boxes/generators/wallslottedholder.py
msgid "tool_width"
msgstr ""
#. help for parameter tool_width
#: boxes/generators/wallslottedholder.py
msgid "overall width for the tools"
msgstr ""
#. help for parameter radius
#: boxes/generators/wallslottedholder.py
msgid "radius of the slots at the front"
msgstr ""
#. name of box generator
#: boxes/generators/wallstairs.py
msgid "WallStairs"
msgstr ""
#. description of WallStairs
#: boxes/generators/wallstairs.py
msgid "Platforms in different heights e.g. for screw drivers"
msgstr ""
#. long description of WallStairs in markdown
#: boxes/generators/wallstairs.py
msgid ""
"You are supposed to add holes or slots to the stair tops yourself using "
"Inkscape or another vector drawing or CAD program.\n"
"\n"
"sh gives height of the stairs from front to back. Note that the overall "
"width and height is bigger than the nominal values as walls and the "
"protrusions are not included in the measurements.\n"
msgstr ""
msgid "WallStairs Settings"
msgstr ""
#. parameter name
#: boxes/generators/wallstairs.py
msgid "braceheight"
msgstr ""
#. help for parameter braceheight
#: boxes/generators/wallstairs.py
msgid "height of the brace at the bottom back (in mm). Zero for none"
msgstr ""
#. name of box generator
#: boxes/generators/walltypetray.py
msgid "WallTypeTray"
msgstr ""
msgid "WallTypeTray Settings"
msgstr ""
#. help for parameter back_height
#: boxes/generators/walltypetray.py
msgid "additional height of the back wall"
msgstr ""
#. help for parameter radius
#: boxes/generators/walltypetray.py
msgid "radius for strengthening walls with the hooks"
msgstr ""
#. name of box generator
#: boxes/generators/wallwrenchholder.py
msgid "WallWrenchHolder"
msgstr ""
#. description of WallWrenchHolder
#: boxes/generators/wallwrenchholder.py
msgid "Hold a set of wrenches at a wall"
msgstr ""
msgid "WallWrenchHolder Settings"
msgstr ""
#. help for parameter depth
#: boxes/generators/wallwrenchholder.py
msgid "depth of the sides (in mm)"
msgstr ""
#. help for parameter number
#: boxes/generators/wallwrenchholder.py
msgid "number of wrenches (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallwrenchholder.py
msgid "min_width"
msgstr ""
#. help for parameter min_width
#: boxes/generators/wallwrenchholder.py
msgid "width of smallest wrench (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallwrenchholder.py
msgid "max_width"
msgstr ""
#. help for parameter max_width
#: boxes/generators/wallwrenchholder.py
msgid "width of largest wrench (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallwrenchholder.py
msgid "min_strength"
msgstr ""
#. help for parameter min_strength
#: boxes/generators/wallwrenchholder.py
msgid "strength of smallest wrench (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallwrenchholder.py
msgid "max_strength"
msgstr ""
#. help for parameter max_strength
#: boxes/generators/wallwrenchholder.py
msgid "strength of largest wrench (in mm)"
msgstr ""
#. parameter name
#: boxes/generators/wallwrenchholder.py
msgid "extra_distance"
msgstr ""
#. help for parameter extra_distance
#: boxes/generators/wallwrenchholder.py
msgid "additional distance between wrenches (in mm)"
msgstr ""
#. name of box generator
#: boxes/generators/winerack.py
msgid "WineRack"
msgstr ""
#. description of WineRack
#: boxes/generators/winerack.py
msgid "Honey Comb Style Wine Rack"
msgstr ""
msgid "WineRack Settings"
msgstr ""
#. help for parameter radius
#: boxes/generators/winerack.py
msgid "Radius of comb"
msgstr ""
#. parameter name
#: boxes/generators/winerack.py
msgid "walls"
msgstr ""
#. help for parameter walls
#: boxes/generators/winerack.py
msgid "which of the honey comb walls to add"
msgstr ""
#. possible choice for walls
#: boxes/generators/winerack.py
msgid "minimal"
msgstr ""
#. possible choice for walls
#: boxes/generators/winerack.py
msgid "no_verticals"
msgstr ""
#: scripts/boxesserver:283
msgid ""
"There is no image yet. Please donate an image of your project on <a "
"href=&quot;https://github.com/florianfesti/boxes/issues/140&quot;>GitHub</a>!"
msgstr ""
#: scripts/boxesserver:394
msgid "Help"
msgstr ""
#: scripts/boxesserver:395
msgid "Home Page"
msgstr ""
#: scripts/boxesserver:396
msgid "Documentation"
msgstr ""
#: scripts/boxesserver:397
msgid "Sources"
msgstr ""
Reference in New Issue View Git Blame Copy Permalink