621 lines
20 KiB
Python
621 lines
20 KiB
Python
#!/usr/bin/env python3
|
||
# -*- coding: utf-8 -*-
|
||
# Copyright (C) 2013-2014 Florian Festi
|
||
#
|
||
# This program is free software: you can redistribute it and/or modify
|
||
# it under the terms of the GNU General Public License as published by
|
||
# the Free Software Foundation, either version 3 of the License, or
|
||
# (at your option) any later version.
|
||
#
|
||
# This program is distributed in the hope that it will be useful,
|
||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
# GNU General Public License for more details.
|
||
#
|
||
# You should have received a copy of the GNU General Public License
|
||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
||
from functools import partial
|
||
from boxes import Boxes, edges, boolarg
|
||
import math
|
||
|
||
|
||
class NotchSettings(edges.Settings):
|
||
"""Settings for Notches on the Dividers"""
|
||
|
||
absolute_params = {
|
||
"upper_radius": 1,
|
||
"lower_radius": 8,
|
||
"depth": 15,
|
||
}
|
||
|
||
|
||
class SlotSettings(edges.Settings):
|
||
"""Settings for Divider Slots
|
||
|
||
Values:
|
||
|
||
* absolute
|
||
* depth : 20 : depth of the slot in mm
|
||
* angle : 0 : angle at which slots are generated, in degrees. 0° is vertical.
|
||
* radius : 2 : radius of the slot entrance in mm
|
||
* extra_slack : 0.2 : extra slack (in addition to thickness and kerf) to help insert dividers in mm"""
|
||
|
||
absolute_params = {
|
||
"depth": 20,
|
||
"angle": 0,
|
||
"radius": 2,
|
||
"extra_slack": 0.2,
|
||
}
|
||
|
||
|
||
class DividerSettings(edges.Settings):
|
||
"""Settings for Dividers
|
||
Values:
|
||
|
||
* absolute_params
|
||
|
||
* bottom_margin : 0 : margin between box's bottom and divider's in mm
|
||
|
||
* relative (in multiples of thickness)
|
||
|
||
* play : 0.05 : play to avoid them clamping onto the walls (in multiples of thickness)
|
||
"""
|
||
|
||
absolute_params = {
|
||
"bottom_margin": 0,
|
||
}
|
||
relative_params = {
|
||
"play": 0.05,
|
||
}
|
||
|
||
|
||
class DividerTray(Boxes):
|
||
"""Divider tray - rows and dividers"""
|
||
|
||
description = "Adding '0:' at the start of the sy parameter adds a slot at the very back. Adding ':0' at the end of sy adds a slot meeting the bottom at the very front. This is especially useful if slot angle is set above zero."
|
||
|
||
ui_group = "Tray"
|
||
|
||
def __init__(self):
|
||
Boxes.__init__(self)
|
||
self.addSettingsArgs(edges.FingerJointSettings)
|
||
self.buildArgParser("sx", "sy", "h", "outside")
|
||
self.addSettingsArgs(SlotSettings)
|
||
self.addSettingsArgs(NotchSettings)
|
||
self.addSettingsArgs(DividerSettings)
|
||
self.argparser.add_argument(
|
||
"--notches_in_wall",
|
||
type=boolarg,
|
||
default=True,
|
||
help="generate the same notches on the walls that are on the dividers",
|
||
)
|
||
self.argparser.add_argument(
|
||
"--left_wall",
|
||
type=boolarg,
|
||
default=True,
|
||
help="generate wall on the left side",
|
||
)
|
||
self.argparser.add_argument(
|
||
"--right_wall",
|
||
type=boolarg,
|
||
default=True,
|
||
help="generate wall on the right side",
|
||
)
|
||
self.argparser.add_argument(
|
||
"--bottom", type=boolarg, default=False, help="generate wall on the bottom",
|
||
)
|
||
|
||
def render(self):
|
||
|
||
side_walls_number = len(self.sx) - 1 + sum([self.left_wall, self.right_wall])
|
||
if side_walls_number == 0:
|
||
raise ValueError("You need at least one side wall to generate this tray")
|
||
|
||
# If measures are inside, we need to adjust height before slot generation
|
||
if not self.outside:
|
||
# If the parameter 'h' is the inner height of the content itself,
|
||
# then the actual tray height needs to be adjusted with the angle
|
||
self.h = self.h * math.cos(math.radians(self.Slot_angle))
|
||
|
||
slot_descriptions = SlotDescriptionsGenerator().generate_all_same_angles(
|
||
self.sy,
|
||
self.thickness,
|
||
self.Slot_extra_slack,
|
||
self.Slot_depth,
|
||
self.h,
|
||
self.Slot_angle,
|
||
self.Slot_radius,
|
||
)
|
||
|
||
# If measures are outside, we need to readjust slots afterwards
|
||
if self.outside:
|
||
self.sx = self.adjustSize(self.sx, self.left_wall, self.right_wall)
|
||
side_wall_target_length = sum(self.sy) - 2 * self.thickness
|
||
slot_descriptions.adjust_to_target_length(side_wall_target_length)
|
||
|
||
self.ctx.save()
|
||
|
||
# Facing walls (outer) with finger holes to support side walls
|
||
facing_wall_length = sum(self.sx) + self.thickness * (len(self.sx) - 1)
|
||
side_edge = lambda with_wall: "F" if with_wall else "e"
|
||
bottom_edge = lambda with_wall: "F" if with_wall else "e"
|
||
upper_edge = (
|
||
DividerNotchesEdge(
|
||
self,
|
||
list(reversed(self.sx)),
|
||
)
|
||
if self.notches_in_wall
|
||
else "e"
|
||
)
|
||
for _ in range(2):
|
||
self.rectangularWall(
|
||
facing_wall_length,
|
||
self.h,
|
||
[
|
||
bottom_edge(self.bottom),
|
||
side_edge(self.right_wall),
|
||
upper_edge,
|
||
side_edge(self.left_wall),
|
||
],
|
||
callback=[partial(self.generate_finger_holes, self.h)],
|
||
move="up",
|
||
)
|
||
|
||
# Side walls (outer & inner) with slots to support dividers
|
||
side_wall_length = slot_descriptions.total_length()
|
||
for _ in range(side_walls_number):
|
||
if _ < side_walls_number - (len(self.sx) - 1):
|
||
be = "F" if self.bottom else "e"
|
||
else:
|
||
be = "f" if self.bottom else "e"
|
||
se = DividerSlotsEdge(self, slot_descriptions.descriptions)
|
||
self.rectangularWall(
|
||
side_wall_length, self.h, [be, "f", se, "f"], move="up"
|
||
)
|
||
|
||
# Switch to right side of the file
|
||
self.ctx.restore()
|
||
self.rectangularWall(
|
||
max(facing_wall_length, side_wall_length), self.h, "ffff", move="right only"
|
||
)
|
||
|
||
# Bottom piece.
|
||
if self.bottom:
|
||
self.rectangularWall(
|
||
facing_wall_length,
|
||
side_wall_length,
|
||
[
|
||
"f",
|
||
"f" if self.right_wall else "e",
|
||
"f",
|
||
"f" if self.left_wall else "e",
|
||
],
|
||
callback=[partial(self.generate_finger_holes, side_wall_length)],
|
||
move="up",
|
||
)
|
||
|
||
# Dividers
|
||
divider_height = (
|
||
# h, with angle adjustement
|
||
self.h / math.cos(math.radians(self.Slot_angle))
|
||
# removing what exceeds in the width of the divider
|
||
- self.thickness * math.tan(math.radians(self.Slot_angle))
|
||
# with margin
|
||
- self.Divider_bottom_margin
|
||
)
|
||
self.generate_divider(
|
||
self.sx, divider_height, "up",
|
||
first_tab_width=self.thickness if self.left_wall else 0,
|
||
second_tab_width=self.thickness if self.right_wall else 0
|
||
)
|
||
for i, length in enumerate(self.sx):
|
||
self.generate_divider(
|
||
[length],
|
||
divider_height,
|
||
"right",
|
||
first_tab_width=self.thickness if self.left_wall or i>0 else 0,
|
||
second_tab_width=self.thickness if self.right_wall or i<(len(self.sx) - 1) else 0,
|
||
)
|
||
|
||
if self.debug:
|
||
debug_info = ["Debug"]
|
||
debug_info.append(
|
||
"Slot_edge_outer_length:{0:.2f}".format(
|
||
slot_descriptions.total_length() + 2 * self.thickness
|
||
)
|
||
)
|
||
debug_info.append(
|
||
"Slot_edge_inner_lengths:{0}".format(
|
||
str.join(
|
||
"|",
|
||
[
|
||
"{0:.2f}".format(e.usefull_length())
|
||
for e in slot_descriptions.get_straigth_edges()
|
||
],
|
||
)
|
||
)
|
||
)
|
||
debug_info.append(
|
||
"Face_edge_outer_length:{0:.2f}".format(
|
||
facing_wall_length
|
||
+ self.thickness * sum([self.left_wall, self.right_wall])
|
||
)
|
||
)
|
||
debug_info.append(
|
||
"Face_edge_inner_lengths:{0}".format(
|
||
str.join("|", ["{0:.2f}".format(e) for e in self.sx])
|
||
)
|
||
)
|
||
debug_info.append("Tray_height:{0:.2f}".format(self.h))
|
||
debug_info.append(
|
||
"Content_height:{0:.2f}".format(
|
||
self.h / math.cos(math.radians(self.Slot_angle))
|
||
)
|
||
)
|
||
self.text(str.join("\n", debug_info), x=5, y=5, align="bottom left")
|
||
|
||
def generate_finger_holes(self, length):
|
||
posx = -0.5 * self.thickness
|
||
for x in self.sx[:-1]:
|
||
posx += x + self.thickness
|
||
self.fingerHolesAt(posx, 0, length)
|
||
|
||
def generate_divider(
|
||
self, widths, height, move, first_tab_width=0, second_tab_width=0):
|
||
total_width = sum(widths) + (len(widths)-1) * self.thickness + first_tab_width + second_tab_width
|
||
|
||
if self.move(total_width, height, move, True):
|
||
return
|
||
|
||
# Upper edge with a finger notch
|
||
play = self.Divider_play
|
||
|
||
# Upper: first tab width
|
||
self.edge(first_tab_width - play)
|
||
|
||
for nr, width in enumerate(widths):
|
||
if nr > 0:
|
||
self.edge(self.thickness)
|
||
DividerNotchesEdge(
|
||
self,
|
||
[width],
|
||
)(width)
|
||
|
||
self.polyline(
|
||
# Upper: second tab width if needed
|
||
second_tab_width - play,
|
||
# First side, with tab depth only if there is 2 walls
|
||
90,
|
||
self.Slot_depth,
|
||
90,
|
||
second_tab_width,
|
||
-90,
|
||
height - self.Slot_depth,
|
||
90,
|
||
)
|
||
# Lower edge
|
||
for width in reversed(widths[1:]):
|
||
self.polyline(
|
||
width - 2 * play,
|
||
90,
|
||
height - self.Slot_depth,
|
||
-90,
|
||
self.thickness + 2 * play,
|
||
-90,
|
||
height - self.Slot_depth,
|
||
90,
|
||
)
|
||
|
||
self.polyline(
|
||
# Second side tab
|
||
widths[0] - 2 * play,
|
||
90,
|
||
height - self.Slot_depth,
|
||
-90,
|
||
first_tab_width,
|
||
90,
|
||
self.Slot_depth,
|
||
)
|
||
|
||
# Move for next piece
|
||
self.move(total_width, height, move)
|
||
|
||
|
||
class SlottedEdgeDescriptions:
|
||
def __init__(self):
|
||
self.descriptions = []
|
||
|
||
def add(self, description):
|
||
self.descriptions.append(description)
|
||
|
||
def get_straigth_edges(self):
|
||
return [x for x in self.descriptions if isinstance(x, StraightEdgeDescription)]
|
||
|
||
def get_last_edge(self):
|
||
return self.descriptions[-1]
|
||
|
||
def adjust_to_target_length(self, target_length):
|
||
actual_length = sum([d.tracing_length() for d in self.descriptions])
|
||
compensation = actual_length - target_length
|
||
|
||
compensation_ratio = compensation / sum(
|
||
[d.asked_length for d in self.get_straigth_edges()]
|
||
)
|
||
|
||
for edge in self.get_straigth_edges():
|
||
edge.outside_ratio = 1 - compensation_ratio
|
||
|
||
def total_length(self):
|
||
return sum([x.tracing_length() for x in self.descriptions])
|
||
|
||
|
||
class StraightEdgeDescription:
|
||
def __init__(
|
||
self,
|
||
asked_length,
|
||
round_edge_compensation=0,
|
||
outside_ratio=1,
|
||
angle_compensation=0,
|
||
):
|
||
self.asked_length = asked_length
|
||
self.round_edge_compensation = round_edge_compensation
|
||
self.outside_ratio = outside_ratio
|
||
self.angle_compensation = angle_compensation
|
||
|
||
def __repr__(self):
|
||
return (
|
||
"StraightEdgeDescription({0}, round_edge_compensation={1}, angle_compensation={2}, outside_ratio={3})"
|
||
).format(
|
||
self.asked_length,
|
||
self.round_edge_compensation,
|
||
self.angle_compensation,
|
||
self.outside_ratio,
|
||
)
|
||
|
||
def tracing_length(self):
|
||
"""
|
||
How much length should take tracing this straight edge
|
||
"""
|
||
return (
|
||
(self.asked_length * self.outside_ratio)
|
||
- self.round_edge_compensation
|
||
+ self.angle_compensation
|
||
)
|
||
|
||
def usefull_length(self):
|
||
"""
|
||
Part of the length which might be used by the content of the tray
|
||
"""
|
||
return self.asked_length * self.outside_ratio
|
||
|
||
|
||
class Memoizer(dict):
|
||
def __init__(self, computation):
|
||
self.computation = computation
|
||
|
||
def __missing__(self, key):
|
||
res = self[key] = self.computation(key)
|
||
return res
|
||
|
||
|
||
class SlotDescription:
|
||
_div_by_cos_cache = Memoizer(lambda a: 1 / math.cos(math.radians(a)))
|
||
_tan_cache = Memoizer(lambda a: math.tan(math.radians(a)))
|
||
|
||
def __init__(
|
||
self, width, depth=20, angle=0, radius=0, start_radius=None, end_radius=None
|
||
):
|
||
self.depth = depth
|
||
self.width = width
|
||
self.start_radius = radius if start_radius == None else start_radius
|
||
self.end_radius = radius if end_radius == None else end_radius
|
||
self.angle = angle
|
||
|
||
def __repr__(self):
|
||
return "SlotDescription({0}, depth={1}, angle={2}, start_radius={3}, end_radius={4})".format(
|
||
self.width, self.depth, self.angle, self.start_radius, self.end_radius
|
||
)
|
||
|
||
def _div_by_cos(self):
|
||
return SlotDescription._div_by_cos_cache[self.angle]
|
||
|
||
def _tan(self):
|
||
return SlotDescription._tan_cache[self.angle]
|
||
|
||
def angle_corrected_width(self):
|
||
"""
|
||
returns how much width is the slot when measured horizontally, since the angle makes it bigger.
|
||
It's the same as the slot entrance width when radius is 0°.
|
||
"""
|
||
return self.width * self._div_by_cos()
|
||
|
||
def round_edge_start_correction(self):
|
||
"""
|
||
returns by how much we need to stop tracing our straight lines at the start of the slot
|
||
in order to do a curve line instead
|
||
"""
|
||
return self.start_radius * (self._div_by_cos() - self._tan())
|
||
|
||
def round_edge_end_correction(self):
|
||
"""
|
||
returns by how much we need to stop tracing our straight lines at the end of the slot
|
||
in order to do a curve line instead
|
||
"""
|
||
return self.end_radius * (self._div_by_cos() + self._tan())
|
||
|
||
def _depth_angle_correction(self):
|
||
"""
|
||
The angle makes one side of the slot deeper than the other.
|
||
"""
|
||
extra_depth = self.width * self._tan()
|
||
return extra_depth
|
||
|
||
def corrected_start_depth(self):
|
||
"""
|
||
Returns the depth of the straigth part of the slot starting side
|
||
"""
|
||
extra_depth = self._depth_angle_correction()
|
||
return self.depth + max(0, extra_depth) - self.round_edge_start_correction()
|
||
|
||
def corrected_end_depth(self):
|
||
"""
|
||
Returns the depth of the straigth part of the slot ending side
|
||
"""
|
||
extra_depth = self._depth_angle_correction()
|
||
return self.depth + max(0, -extra_depth) - self.round_edge_end_correction()
|
||
|
||
def tracing_length(self):
|
||
"""
|
||
How much length this slot takes on an edge
|
||
"""
|
||
return (
|
||
self.round_edge_start_correction()
|
||
+ self.angle_corrected_width()
|
||
+ self.round_edge_end_correction()
|
||
)
|
||
|
||
|
||
class SlotDescriptionsGenerator:
|
||
def generate_all_same_angles(
|
||
self, sections, thickness, extra_slack, depth, height, angle, radius=2,
|
||
):
|
||
width = thickness + extra_slack
|
||
|
||
descriptions = SlottedEdgeDescriptions()
|
||
|
||
# Special case: if first slot start at 0, then radius is 0
|
||
first_correction = 0
|
||
current_section = 0
|
||
if sections[0] == 0:
|
||
slot = SlotDescription(
|
||
width, depth=depth, angle=angle, start_radius=0, end_radius=radius,
|
||
)
|
||
descriptions.add(slot)
|
||
first_correction = slot.round_edge_end_correction()
|
||
current_section += 1
|
||
|
||
first_length = sections[current_section]
|
||
current_section += 1
|
||
descriptions.add(
|
||
StraightEdgeDescription(
|
||
first_length, round_edge_compensation=first_correction
|
||
)
|
||
)
|
||
|
||
for l in sections[current_section:]:
|
||
slot = SlotDescription(width, depth=depth, angle=angle, radius=radius,)
|
||
|
||
# Fix previous edge length
|
||
previous_edge = descriptions.get_last_edge()
|
||
previous_edge.round_edge_compensation += slot.round_edge_start_correction()
|
||
|
||
# Add this slot
|
||
descriptions.add(slot)
|
||
|
||
# Add the straigth edge after this slot
|
||
descriptions.add(
|
||
StraightEdgeDescription(l, slot.round_edge_end_correction())
|
||
)
|
||
|
||
# We need to add extra space for the divider (or the actual content)
|
||
# to slide all the way down to the bottom of the tray in spite of walls
|
||
end_length = height * math.tan(math.radians(angle))
|
||
descriptions.get_last_edge().angle_compensation += end_length
|
||
|
||
return descriptions
|
||
|
||
|
||
class DividerNotchesEdge(edges.BaseEdge):
|
||
"""Edge with multiple notches for easier access to dividers"""
|
||
|
||
description = "Edge with multiple notches for easier access to dividers"
|
||
|
||
def __init__(self, boxes, sx):
|
||
|
||
super().__init__(boxes, None)
|
||
|
||
self.sx = sx
|
||
|
||
def __call__(self, _, **kw):
|
||
first = True
|
||
for width in self.sx:
|
||
if first:
|
||
first = False
|
||
else:
|
||
self.edge(self.thickness)
|
||
self.edge_with_notch(width)
|
||
|
||
def edge_with_notch(self, width):
|
||
# width (with notch if possible)
|
||
upper_third = (
|
||
width - 2 * self.Notch_upper_radius - 2 * self.Notch_lower_radius
|
||
) / 3
|
||
if upper_third > 0:
|
||
straightHeight = (
|
||
self.Notch_depth - self.Notch_upper_radius - self.Notch_lower_radius
|
||
)
|
||
self.polyline(
|
||
upper_third,
|
||
(90, self.Notch_upper_radius),
|
||
straightHeight,
|
||
(-90, self.Notch_lower_radius),
|
||
upper_third,
|
||
(-90, self.Notch_lower_radius),
|
||
straightHeight,
|
||
(90, self.Notch_upper_radius),
|
||
upper_third,
|
||
)
|
||
else:
|
||
# if there isn't enough room for the radius, we don't use it
|
||
self.edge(width)
|
||
|
||
|
||
class DividerSlotsEdge(edges.BaseEdge):
|
||
"""Edge with multiple angled rounded slots for dividers"""
|
||
|
||
description = "Edge with multiple angled rounded slots for dividers"
|
||
|
||
def __init__(self, boxes, descriptions):
|
||
|
||
super().__init__(boxes, None)
|
||
|
||
self.descriptions = descriptions
|
||
|
||
def __call__(self, length, **kw):
|
||
|
||
self.ctx.save()
|
||
|
||
for description in self.descriptions:
|
||
if isinstance(description, SlotDescription):
|
||
self.do_slot(description)
|
||
elif isinstance(description, StraightEdgeDescription):
|
||
self.do_straight_edge(description)
|
||
|
||
# rounding errors might accumulates :
|
||
# restore context and redo the move straight
|
||
self.ctx.restore()
|
||
self.moveTo(length)
|
||
|
||
def do_straight_edge(self, straight_edge):
|
||
self.edge(straight_edge.tracing_length())
|
||
|
||
def do_slot(self, slot):
|
||
self.ctx.save()
|
||
|
||
self.polyline(
|
||
0,
|
||
(90 - slot.angle, slot.start_radius),
|
||
slot.corrected_start_depth(),
|
||
-90,
|
||
slot.width,
|
||
-90,
|
||
slot.corrected_end_depth(),
|
||
(90 + slot.angle, slot.end_radius),
|
||
)
|
||
|
||
# rounding errors might accumulates :
|
||
# restore context and redo the move straight
|
||
self.ctx.restore()
|
||
self.moveTo(slot.tracing_length())
|