nodemcu-firmware/app/user/user_main.c

/******************************************************************************
 * Copyright 2013-2014 Espressif Systems (Wuxi)
 *
 * FileName: user_main.c
 *
 * Description: entry file of user application
 *
 * Modification history:
 *     2014/1/1, v1.0 create this file.
*******************************************************************************/
#include "lua.h"
#include "platform.h"
#include "c_string.h"
#include "c_stdlib.h"
#include "c_stdio.h"
#include "vfs.h"
#include "flash_api.h"
#include "user_interface.h"
#include "user_exceptions.h"
#include "user_modules.h"

#include "ets_sys.h"
#include "driver/uart.h"
#include "task/task.h"
#include "mem.h"
#include "espconn.h"

#ifdef LUA_USE_MODULES_RTCTIME
#include "rtc/rtctime.h"
#endif

static task_handle_t input_sig;
static uint8 input_sig_flag = 0;

/* Contents of esp_init_data_default.bin */
extern const uint32_t init_data[];
extern const uint32_t init_data_end[];
__asm__(
  /* Place in .text for same reason as user_start_trampoline */
  ".section \".rodata.dram\"\n"
  ".align 4\n"
  "init_data:\n"
  ".incbin \"" ESP_INIT_DATA_DEFAULT "\"\n"
  "init_data_end:\n"
  ".previous\n"
);

/* Note: the trampoline *must* be explicitly put into the .text segment, since
 * by the time it is invoked the irom has not yet been mapped. This naturally
 * also goes for anything the trampoline itself calls.
 */
void TEXT_SECTION_ATTR user_start_trampoline (void)
{
   __real__xtos_set_exception_handler (
     EXCCAUSE_LOAD_STORE_ERROR, load_non_32_wide_handler);

#ifdef LUA_USE_MODULES_RTCTIME
  // Note: Keep this as close to call_user_start() as possible, since it
  // is where the cpu clock actually gets bumped to 80MHz.
  rtctime_early_startup ();
#endif

  /* Re-implementation of default init data deployment. The SDK does not
   * appear to be laying down its own version of init data anymore, so
   * we have to do it again. To see whether we need to, we read out
   * the flash size and do a test for esp_init_data based on that size.
   * If it's missing, we need to initialize it *right now* before the SDK
   * starts up and gets stuck at "rf_cal[0] !=0x05,is 0xFF".
   * If the size byte is wrong, then we'll end up fixing up the init data
   * again on the next boot, after we've corrected the size byte.
   * Only remaining issue is lack of spare code bytes in iram, so this
   * is deliberately quite terse and not as readable as one might like.
   */
  SPIFlashInfo sfi;
  SPIRead (0, (uint32_t *)(&sfi), sizeof (sfi)); // Cache read not enabled yet, safe to use
  if (sfi.size < 2) // Compensate for out-of-order 4mbit vs 2mbit values
    sfi.size ^= 1;
  uint32_t flash_end_addr = (256 * 1024) << sfi.size;
  uint32_t init_data_hdr = 0xffffffff;
  uint32_t init_data_addr = flash_end_addr - 4 * SPI_FLASH_SEC_SIZE;
  SPIRead (init_data_addr, &init_data_hdr, sizeof (init_data_hdr));
  if (init_data_hdr == 0xffffffff)
  {
    SPIEraseSector (init_data_addr);
    SPIWrite (init_data_addr, init_data, 4 * (init_data_end - init_data));
  }

  call_user_start ();
}

// +================== New task interface ==================+
static void start_lua(task_param_t param, uint8 priority) {
  char* lua_argv[] = { (char *)"lua", (char *)"-i", NULL };
  NODE_DBG("Task task_lua started.\n");
  lua_main( 2, lua_argv );
  // Only enable UART interrupts once we've successfully started up,
  // otherwise the task queue might fill up with input events and prevent
  // the start_lua task from being posted.
  ETS_UART_INTR_ENABLE();
}

static void handle_input(task_param_t flag, uint8 priority) {
  (void)priority;
  if (flag & 0x8000) {
    input_sig_flag = flag & 0x4000 ? 1 : 0;
  }
  lua_handle_input (flag & 0x01);
}

bool user_process_input(bool force) {
    return task_post_low(input_sig, force);
}

void nodemcu_init(void)
{
    NODE_ERR("\n");
    // Initialize platform first for lua modules.
    if( platform_init() != PLATFORM_OK )
    {
        // This should never happen
        NODE_DBG("Can not init platform for modules.\n");
        return;
    }

#if defined(FLASH_SAFE_API)
    if( flash_safe_get_size_byte() != flash_rom_get_size_byte()) {
        NODE_ERR("Self adjust flash size.\n");
        // Fit hardware real flash size.
        flash_rom_set_size_byte(flash_safe_get_size_byte());

        system_restart ();
        // Don't post the start_lua task, we're about to reboot...
        return;
    }
#endif // defined(FLASH_SAFE_API)

#if defined ( CLIENT_SSL_ENABLE ) && defined ( SSL_BUFFER_SIZE )
    espconn_secure_set_size(ESPCONN_CLIENT, SSL_BUFFER_SIZE);
#endif

#ifdef BUILD_SPIFFS
    if (!vfs_mount("/FLASH", 0)) {
        // Failed to mount -- try reformat
	dbg_printf("Formatting file system. Please wait...\n");
        if (!vfs_format()) {
            NODE_ERR( "\n*** ERROR ***: unable to format. FS might be compromised.\n" );
            NODE_ERR( "It is advised to re-flash the NodeMCU image.\n" );
        }
        // Note that fs_format leaves the file system mounted
    }
    // test_spiffs();
#endif
    // endpoint_setup();

    if (!task_post_low(task_get_id(start_lua),'s'))
      NODE_ERR("Failed to post the start_lua task!\n");
}

#ifdef LUA_USE_MODULES_WIFI
#include "../modules/wifi_common.h"

void user_rf_pre_init(void)
{
//set WiFi hostname before RF initialization (adds ~479 us to boot time)
  wifi_change_default_host_name();
}
#endif

/******************************************************************************
 * FunctionName : user_rf_cal_sector_set
 * Description  : SDK just reversed 4 sectors, used for rf init data and paramters.
 *                We add this function to force users to set rf cal sector, since
 *                we don't know which sector is free in user's application.
 *                sector map for last several sectors : ABCCC
 *                A : rf cal
 *                B : rf init data
 *                C : sdk parameters
 * Parameters   : none
 * Returns      : rf cal sector
*******************************************************************************/
uint32
user_rf_cal_sector_set(void)
{
    enum ext_flash_size_map size_map = system_get_flash_size_map();
    uint32 rf_cal_sec = 0;

    switch (size_map) {
        case FLASH_SIZE_4M_MAP_256_256:
            rf_cal_sec = 128 - 5;
            break;

        case FLASH_SIZE_8M_MAP_512_512:
            rf_cal_sec = 256 - 5;
            break;

        case FLASH_SIZE_16M_MAP_512_512:
        case FLASH_SIZE_16M_MAP_1024_1024:
            rf_cal_sec = 512 - 5;
            break;

        case FLASH_SIZE_32M_MAP_512_512:
        case FLASH_SIZE_32M_MAP_1024_1024:
        case FLASH_SIZE_32M_MAP_2048_2048:
            rf_cal_sec = 1024 - 5;
            break;

        case FLASH_SIZE_64M_MAP:
            rf_cal_sec = 2048 - 5;
            break;

        case FLASH_SIZE_128M_MAP:
            rf_cal_sec = 4096 - 5;
            break;

        default:
            rf_cal_sec = 0;
            break;
    }

    return rf_cal_sec;
}

/******************************************************************************
 * FunctionName : user_init
 * Description  : entry of user application, init user function here
 * Parameters   : none
 * Returns      : none
*******************************************************************************/
void user_init(void)
{
#ifdef LUA_USE_MODULES_RTCTIME
    rtctime_late_startup ();
#endif

    UartBautRate br = BIT_RATE_DEFAULT;

    input_sig = task_get_id(handle_input);
    uart_init (br, br, input_sig, &input_sig_flag);

#ifndef NODE_DEBUG
    system_set_os_print(0);
#endif

    system_init_done_cb(nodemcu_init);
}