Commit Graph

2319 Commits

Author SHA1 Message Date
Gregor Hartmann 0e88617659
Fix ftpserver documentation and some formating in httpserver.md (#3322) 2020-11-04 09:34:05 +01:00
Marcel Stör fab34a6cd0 Replace master with release 2020-11-03 22:57:15 +01:00
Nathaniel Wesley Filardo f5665ace71
MCP23017 module refactorings to save some heap (#3317)
* mcp23017: functions to metatable

Avoids closures for each module.

* mcp23017: inline constants

Saves nearly half a kilobyte of heap.
2020-10-29 12:59:30 +00:00
Marcel P ef353809eb
Add mcp23017 Lua module (#3197) 2020-10-25 12:48:34 +01:00
Nathaniel Wesley Filardo f8baf63a73 Further adaptation of lfs/_init.lua
See https://github.com/nodemcu/nodemcu-firmware/issues/3278 .  Thanks to
@vsky279 and @bazooka07 for suggestions.
2020-10-23 04:22:30 +01:00
Nathaniel Wesley Filardo 045fc80c70 pipe: comment and style fixes (NFC)
Reflow comments to 80 columns; fix some typos and other nits.
2020-10-23 04:21:51 +01:00
Nathaniel Wesley Filardo 962991ed18 pipe: fix unread buffer chunk management
unread contained two subtle bugs:

 - it created a buffer chunk at pipe[1], when that position is reserved
   for the pipe reader function.  Because it shifted pipe[i] to
   pipe[i+1], including pipe[1], this was likely to manifest as the pipe
   later attempting to dequeue a function rather than a buffer chunk
   user datum.  Solve this by adjusting the loop bounds and creation
   index.

 - when it created a new buffer chunk, it left that chunk's ->start and
   ->end fields at 0, but would then exit the loop to do the tail fill,
   which was in turn assuming the exit condition of the loop when an
   existing chunk had room, namely that data had been moved to the right
   and so ->start > l.  Solve this by making new chunks empty but with
   ->start = ->end = LUAL_BUFFERSIZE.  It may be slightly better to
   instead try to leave room at both ends if the buffer was empty prior
   to this unread.

FIXES: https://github.com/nodemcu/nodemcu-firmware/issues/3155
2020-10-23 04:21:51 +01:00
Lukáš Voborský 734b02a734 wiegand Lua 5.3 fix 2020-10-23 04:19:41 +01:00
Cody Cutrer 63e1fcda06
add wiegand module (#3203)
* add wiegand module

* minor tweaks to wiegand module

 * fix a whitespace error (tabs!!!!)
 * remove an unnecessary volatile qualifier
2020-10-19 01:05:31 +01:00
Philip Gladstone 73df18d738
Fix the initialization of the wifi default hostname. (#3303)
* It appears that the rf_pre_init is not called any more. Also cleaned up the code in
wifi_common.
* Log a message (at the right baud rate) if the hostname is invalid
* Updated the comment in the user_config.h file
2020-10-18 20:48:10 +02:00
Philip Gladstone 7185b9c603
Improved startup performance and measurement tools. (#3171)
* Don't adjust the clock until after we deal with rtctime...
* Switched to using START_OPTION_CPU_FREQ_MAX instead.
* Use setfield and add caching of the startup option
* Put the startupcounts warning into a warning box
2020-10-18 20:46:47 +02:00
hanfengcan 02e4720b3d fix: fixed the memory leak 2020-10-18 16:35:32 +01:00
Philip Gladstone 7830ae671e
Guard against freeing a ref of zero (#3308) 2020-10-13 21:43:38 +02:00
Lukáš Voborský b9091784ae bme280 driver in Lua+C 2020-10-05 20:41:36 +01:00
Lukáš Voborský 54e8696ac9
struct module minor documentation fix (#3306)
Thanks
2020-10-04 17:26:42 -04:00
Lukáš Voborský ebfce4a911 Fixing bug in `file.readline` when line length exceeds 128 chars 2020-09-29 22:57:18 +01:00
Gregor Hartmann 8124341a7b
Change from `master` to `release` 2020-09-29 17:37:20 +02:00
Nathaniel Wesley Filardo 0a1d122cb8
crypto: remove toHex and toBase64 (#3300)
We marked these for deprecation in favor of the functions of the same
name in encoder.  Let's actually make good on that.
2020-09-28 20:42:16 +02:00
philip ed8c50872a Add the submodule properly 2020-09-27 03:05:36 +01:00
philip 274828cfd5 Remove ets_printf reference 2020-09-27 03:05:36 +01:00
philip 96a6dcc196 CLean up the PR a bit 2020-09-27 03:05:36 +01:00
philip 9bea108da7 Now use the original c99-snprintf as a submodule. 2020-09-27 03:05:36 +01:00
philip 6ba23ca267 Remove some uses of etc_*printf 2020-09-27 03:05:36 +01:00
philip 8bce7937ac Conditionalize int2float on lua 5.3 2020-09-27 03:05:36 +01:00
philip f316ebf73a Remove ESP8266 special case 2020-09-27 03:05:36 +01:00
philip 403c633b25 Make it work for the integer lua51 build 2020-09-27 03:05:36 +01:00
philip 85298b34c5 Now round trips in float firmware, and gets it roughly right in double (in lua 51) 2020-09-27 03:05:36 +01:00
philip 96d8047f71 Give it a chance of working under Lua 5.1 2020-09-27 03:05:36 +01:00
philip df9f3030e6 Add snprintf and remove our sprintf 2020-09-27 03:05:36 +01:00
philip 5b6b2f98b7 Make round tripping work for lua53 and floats 2020-09-27 03:05:36 +01:00
philip e9c4bb74d3 Make it inline 2020-09-27 03:04:52 +01:00
philip 862c727cb4 Add missing ICACHE_RAM_ATTR 2020-09-27 03:04:52 +01:00
Philip Gladstone 9d74cd5aa0
Improve the enduser setup experience by triggering captive portal detection. (#3282)
* Make captive portal detection work on macOS
* Change the default SSID prefix to be NodeMCU
2020-09-18 23:47:52 +02:00
Nathaniel Wesley Filardo dc334f87a6
uart: expose fifo depth counters (#3177) 2020-09-18 23:46:32 +02:00
Philip Gladstone 139af0cdd1
Handle tcp fragmentation and also fix XSS problem. (#3275) 2020-09-15 14:06:38 +02:00
Philip Gladstone c000a0894a
Fix problem reading files a multiple of 128 bytes long (#3280) 2020-09-13 11:37:54 -04:00
vsky 64bbf00689 Adding '+' flag to string.format 2020-09-09 04:23:33 +01:00
Gregor Hartmann 4d784798a7
Add deprecation note to node.flashreload (#3273) 2020-09-08 12:17:12 +02:00
Terry Ellison d88c14b9b6
Update node.c
Redo last change
2020-09-07 13:09:25 +01:00
Terry Ellison 41c5f8fd57
Update node.c
To fix #3251.
2020-09-07 12:53:51 +01:00
Lukáš Voborský 38f13a7e9f
Fixes broken `tmr.alarm` (#3263)
Co-authored-by: vsky <blue205@centrum.cz>
2020-09-05 14:16:57 +02:00
vsky e28cf8d983 Fixes `net.ifinfo` failure 2020-09-04 21:54:40 +02:00
galjonsfigur e7620b0647
SoftUART module fixes and code simplification (#3104)
* SoftUART fixes:

- Simplify code by using lua_L* functions and using userdata properly
- Fix some edge-cases
- Add more examples to documentation

* Don't de-register interrupt hook if there is more RX instances

* More bug fixes and registering simplification with luaL_reref and unref2

* Correct documentation of SoftUART module
2020-09-04 17:02:33 +02:00
vsky a0d27059bc LFS lua example Lua 5.3 compatibility 2020-09-03 12:50:29 +01:00
Philip Gladstone ba611101e5
Don't allocate flash to SPIFFS that is reserved by the system. (#3260) 2020-09-01 22:40:57 +01:00
galjonsfigur b4c148eff0
Add missing features to Travis CI PR build (#3255) 2020-08-30 21:04:00 +02:00
Lukáš Voborský d72ea91ed0
Implementing optional parameter `restart` to tmr:start() (#3111) 2020-08-29 21:43:50 +02:00
M.K 87030a87ea
Fix filename of luac.cross in upload.md (#3258) 2020-08-29 21:25:38 +02:00
Philip Gladstone 606f91664b
First phase of number to integer conversion (#3221) 2020-08-29 17:48:24 +01:00
Philip Gladstone 0e02c0e5f3
Change struct & sjson to use integers. This is slightly more complex (#3222)
* Change struct to use integers. This is slightly more complex as we have to deal with Unsigned 32-bit integers (that aren't lua integers)
* Use int64 in struct rather than double.
* Fix sjson to do the right things in LUA5.3 with integers and floats
2020-08-23 23:11:18 +01:00