639a11e9c4
Merge pull request #1043 from hvegh/dev
...
Add i2c based module for am2320 humidity sensor
2016-02-14 15:27:00 +01:00
a1c1e015ff
Add i2c based module for am2320 humidity sensor
...
Example use:
> sda=1
> scl=2
> am2320.init(sda,scl)
> rh, t = am2320.read()
> print(string.format("Temperature: %s degrees C", t / 10))
> print(string.format("RH: %s %%", rh / 10))
signed-off-by: henk.vergonet@gmail.com
2016-02-14 15:12:42 +01:00
d4ae67d0b4
Changed filename length error handling per TerryE's suggestion
2016-02-13 18:58:04 -05:00
44786a22ff
Added file.exists() method to save the need to use file.list() for checking file existence
2016-02-13 17:37:04 -05:00
0e9a0d43d4
Direct port of the struct module that provides access to
...
packed structures in strings. Very useful for network protocol
packing/unpacking. The docs are directly converted from the original.
Review feedback
Fix typo
2016-02-13 08:32:25 -05:00
2c687313de
Merge pull request #1002 from pjsg/mqtt
...
Fix memory exhaustion in mqtt under circumstances from issue #975
2016-02-10 12:58:26 +01:00
c40cd0953e
Merge pull request #1021 from Takkuz/dev
...
Added full support for DS3231
2016-02-10 12:57:44 +01:00
ecd79d7914
Fixed some grammar on docs
2016-02-10 09:32:37 +01:00
2e37a52aaa
Merge pull request #1030 from devsaurus/spi_pinconfig
...
Enable spi functionality on pins after internal config has been applied.
2016-02-10 07:06:13 +01:00
2c5303d51f
Merge pull request #1029 from devsaurus/spi_buffer
...
Extend data type for spi miso/mosi buffer offset to 16 bit.
2016-02-10 07:05:59 +01:00
5d8848ecaf
Enable spi functionality on pins after internal config has been applied.
2016-02-09 23:26:40 +01:00
dc2e1efefb
Extend data type for spi miso/mosi buffer offset to 16 bit.
2016-02-09 22:05:05 +01:00
6623b9e3fd
spi.CPOL_HIGH supported
...
with bf74b617d0
2016-02-09 20:30:58 +01:00
b3335819b8
Move Markdown syntax hint to a more sensible place
2016-02-08 21:52:21 +01:00
ca104a96ce
Added full support for DS3231
2016-02-07 21:19:33 +01:00
25585672ae
Merge pull request #1014 from urish/patch-1
...
Fix secure TCP connections for `net` and `mqtt` modules.
2016-02-07 19:51:32 +01:00
31a62a9eb1
Fix secure MQTT connections
...
Call `espconn_secure_set_size()` before calling `espconn_secure_connect()`, similar to how the http module works
2016-02-07 18:11:30 +02:00
81c1d55aaa
Merge pull request #1016 from marcelstoer/dev-contribution-update
...
Add section about writing documentation
2016-02-06 22:47:57 +00:00
6f7f5bfc91
Add section about writing documentation
...
Fixes #1013
2016-02-06 23:15:29 +01:00
e9cde6eb34
Correct secure option in MQTT documentation
...
Fixes #996
2016-02-06 22:28:07 +01:00
d760a5e29c
Merge pull request #940 from devsaurus/dev-ssd1327
...
implement architecture dependent delay functions for u8glib
2016-02-06 21:46:01 +01:00
ce498462f7
Fix secure TCP connections
...
Call `espconn_secure_set_size()` before calling `esp_secure_connect()`, should fix issues like #710 and #520
2016-02-06 17:12:46 +02:00
58dd15e1d1
Added crypto.fhash function for hashing files
2016-02-05 22:19:00 +00:00
c9cf02ba31
Send any queued packets when possible
2016-02-01 22:29:32 -05:00
fcb14a33b3
Merge pull request #987 from DiUS/enduser_enhanced
...
Enhancements to enduser_setup module
2016-02-02 00:39:47 +11:00
86839d6e71
Fixes and enchancements for enduser_setup module.
...
Fixes:
* Removed spurious \0 bytes being sent to the client in many cases.
* Properly terminated 404 header.
* Now including Content-length: header for index.html (including built-in).
Clients otherwise had to wait for their own timeout before considering
the page load complete, which resulting in an unpleasant sluggish
experience.
* Switched form submission to GET, as iOS sometimes does not include the
body in the same packet as the POST header, which led to the module
not finding the form values.
* Added redirect after form submission to avoid blank-page-in-browser.
* Moved common "enduser_setup" prefix to a lua_pushfstring() to reduce
string literal overhead.
* Replaced cached lua_State* with calls to lua_getstate(), as in other
modules.
* Fixed broken appending of MAC to the SSID.
* Fixed up macro definitions to not break `if` clauses unintentionally.
Enhancements:
* Support for scanning for available WiFi networks, and picking from the list.
* Support for retrieving the current WiFi station status.
* Added "manual" mode, where the module does not (re)configure the AP setup,
nor shut down automatically. Default is still automatic, as before.
* Updated docs for new `enduser_setup.manual()` function.
2016-02-01 14:42:24 +11:00
d083122688
remove space in heading for gpio.write()
2016-01-31 21:58:49 +01:00
9e861313e9
Add chapter about firmware files and flash address
...
Had to slightly tweak the Markdown headers due to
https://github.com/mkdocs/mkdocs/issues/770 :(.
Fixes #990 .
2016-01-31 14:33:49 +01:00
ccd556be68
Add note about UART speed
2016-01-31 14:31:15 +01:00
47801ca7a0
Merge pull request #994 from devsaurus/upgrade-fw
...
Add notes about upgrading from old fw
2016-01-31 12:16:56 +01:00
53f1761cfb
add notes about upgrading from old fw
2016-01-31 11:54:58 +01:00
f42fdb1a76
also fix cb prototype description
2016-01-30 10:23:27 +01:00
76b28c1f74
Simple mdns implementation using the Espressif code
2016-01-29 21:37:19 -05:00
1697126a15
terminate example
2016-01-29 22:40:15 +01:00
8db93bcabf
make delay optional
2016-01-29 18:52:38 +01:00
3a597f1698
implement architecture dependent delay functions for esp8266 port
2016-01-29 18:52:38 +01:00
4bf2bf03d7
Merge pull request #985 from devsaurus/mqtt_error_checking
...
Improve error checking in mqtt module
2016-01-29 12:07:01 +11:00
9741c8f1b5
fix #527
2016-01-28 23:46:35 +01:00
1c32d20502
improve error checking in mqtt module
...
connect(), close(), subscribe(), publish()
2016-01-28 21:36:38 +01:00
d5f71eb0c6
Simplified linker script handling of libc.
...
Having ascertained that the SDK itself has no (zero, zilch, nada) dependencies
on the standard C library, the NodeMCU linker script now puts any and all
libc functions into irom, rather than carefully picking the ones that
were used by NodeMCU some months ago. This should help keep iram free for
the things which really need to be in iram (such as ISRs).
2016-01-28 17:56:01 +11:00
9fd215b028
Corrected sprintf() prototype & behaviour.
2016-01-28 17:56:01 +11:00
74d27b3486
Merge pull request #968 from devsaurus/crypto_http_mqtt_lua-gnu11
...
Enable -std=gnu11 for crypto, http, mqtt, and lua dir
2016-01-28 17:36:27 +11:00
5ec2b695be
Merge pull request #981 from jfollas/dev
...
Fixed issue where default ESP_xxxxxx SSID was appearing
2016-01-28 11:14:24 +11:00
c3e49940eb
Fix a few titles on doc pages
2016-01-27 22:06:24 +01:00
edbcbe1b0f
Fixed issue where default ESP_xxxxxx SSID was appearing for enduser_setup
2016-01-27 10:24:10 -05:00
fc87316b14
Merge pull request #979 from jmattsson/http-docs-limit
...
Updated http module docs for #977 .
2016-01-27 11:03:07 +11:00
8f7055d030
Updated http module docs for #977 .
2016-01-27 10:52:13 +11:00
9741f2c678
Merge pull request #977 from vowstar/fixed-http-1-1
...
Fix HTTP response bug while server only support HTTP/1.0
2016-01-27 10:51:48 +11:00
4792f1bb53
Merge pull request #978 from robertfoss/apa102_cleanup
...
Cleaned up APA102 module registration.
2016-01-26 23:30:01 +01:00
6ef7ece046
Cleaned up APA102 module registration.
2016-01-26 17:14:19 -05:00
Marcel Stör
Henk Vergonet
jfollas
philip
Vittorio Giovanelli
devsaurus
Uri Shaked
Terry Ellison
Marcel Stör
cheloftus
Johny Mattsson
Johny Mattsson
Robert Foss