2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
67d785ffec
Restore default data and init data before system restore.
2015-07-04 04:27:59 +08:00
b6e431ebed
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 03:55:02 +08:00
89aaf475d0
Add node.restore().
...
If NodeMCU can't connect Wi-Fi, please use it.
After reboot, all will be OK.
RESTORE ITEMS:
wifi_station_set_auto_connect, wifi_set_phy_mode, wifi_softap_set_config, wifi_station_set_config, wifi_set_opmode.
2015-07-04 03:54:22 +08:00
f5938dfe17
Will made some modules default off.
...
Need discussion. And turn off some modules by default.
May our community should build more version?
2015-07-04 02:51:41 +08:00
5279dc9dfc
Merge pull request #525 from kbeckmann/ws2801_disable_default
...
Disabled WS2801 module
2015-07-04 02:48:44 +08:00
2224f24dad
Merge branch 'dev096' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:31:15 +08:00
638bf7b023
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:28:31 +08:00
fb0e4722b8
Fix and support Wi-Fi smart link (esp-touch and air-kiss).
...
Espressif open-source android and iOs APP,
See also https://github.com/espressifapp
Note: Must use ESP-TOUCH-V021 in espressif app history.
2015-07-04 02:27:51 +08:00
485e5a3140
Disabled WS2801 module
2015-07-03 12:35:47 +02:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
125d2173d6
Merge pull request #519 from md5crypt/tmr_module
...
rewrote the timer module from scratch
2015-06-30 15:50:08 +08:00
2691383696
added tmr.interval
2015-06-29 23:15:30 +02:00
c1d2eb413b
rewrote the timer module from scratch
2015-06-29 21:19:24 +02:00
aa710d1f53
Merge pull request #513 from NodeUSB/dev096
...
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-28 14:55:07 +08:00
66ca7f6aca
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-27 18:14:24 -04:00
cf72a3203d
update 433MHz transmission doc, add static ICACHE_FLASH_ATTR flag
2015-06-27 14:42:39 -04:00
dce0d2c2a8
Release build 20150627.
...
fixed ap/station-ap cannot connect to the device.
added wifi.ap.getconfig().
fixed net.dns.getdnsserver().
added new base64 lua example.
added node.bootreason() to inspect boot cause.
optimization of u8g.
2015-06-27 15:21:48 +08:00
663158e4ab
added wifi.ap.getconfig() by @md5crypt https://github.com/nodemcu/nodemcu-firmware/pull/500/files#diff-81824fe90d00138d98b6e9f0d7d8c7dcL1458 .
2015-06-27 12:30:36 +08:00
a32df17579
Fixed net.dns.getdnsserver() by @md5crypt.
2015-06-27 12:26:24 +08:00
2ab4de9c09
Merge pull request #512 from jmattsson/boot-reason
...
Expose boot reason in Lua
2015-06-27 11:25:35 +08:00
7bd10e8a17
Added node.bootreason() to inspect boot cause.
2015-06-27 12:34:03 +10:00
b5c6a5b1c6
Stop dhcpserver from writing to const data.
2015-06-27 12:12:21 +10:00
d507060ecf
Merge pull request #509 from devsaurus/dev-irom0
...
Unify memory section usage for u8g
2015-06-27 00:04:46 +08:00
dda121e5e0
Release 0.9.6-dev_20150625
2015-06-26 18:32:46 +08:00
277c6d0116
move u8g progmem constants to new .rodata sections
...
this simplifies the overall memory handling based on the irom support by @jmattsson
2015-06-25 00:38:11 +02:00
5ca807d7a1
fixed net.dns.getdnsserver() and added wifi.ap.getconfig()
2015-06-24 22:38:37 +02:00
b0f9788a6d
Move constants to ROM. Frees up 16k+ of RAM.
...
Accessing 8bit and 16bit constants from ROM rather than RAM comes with a
performance cost, as these loads go through the load/store exception
vector. Any performance critical constants can be forced back into RAM
as RAM_CONST_ATTR.
The entry point has changed from call_user_start() to user_start_trampoline()
in order for the exception handler to be installed early enough.
2015-06-23 15:41:14 +10:00
0c924e56c6
Support for loading sub-32 wide data from irom.
2015-06-23 15:41:14 +10:00
04c03b00ae
@jorgempy We change the API of DNS callback format back
...
Make the net api universe Callback Format -> function(conn,ip)
2015-06-20 19:10:01 +08:00
75c3cf29c2
Disable interrupts while communicating with DHTxx.
2015-06-20 02:08:20 +08:00
90ca92ca6e
Revert "Merge dev to dev096"
2015-06-20 01:50:29 +08:00
3430e5f826
Add __attribute__((optimize("O2"))) to ws2812 module.
2015-06-20 01:40:45 +08:00
cda7992c1a
Fix DHTLIB bug of DHT22, DHT21, DHT33, DHT44.
2015-06-20 00:26:59 +08:00
c56659e84d
Using __attribute__((alias("dht_read"))) reduce code size.
2015-06-19 01:05:19 +08:00
87341547d7
Update DHTlib, supported DHT11 or DHTxx automatic detection.
...
Using @MarsTechHAN 's method.
New usage:
status, temp, humi, tempdec, humidec = dht.read( id )
print( dht.read( id ) )
= dht.read( id )
2015-06-18 20:53:52 +08:00
98a2c9fdb6
Align all TAB=8 in app/Makefile, make sure it fit for github display.
2015-06-18 17:36:27 +08:00
af56aea1e8
Update dhtlib api, support both integer and float version.
2015-06-18 17:19:55 +08:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
515a7bf1ab
Add dhtlib for DHT11/21/22/33/44, port from Arduino.
2015-06-17 16:30:12 +08:00
b0a4e4d3e9
Changed BUILD_DATE.
2015-06-17 00:16:57 +08:00
d955c8815b
add 433MHz transmission
2015-06-11 18:07:16 -04:00
7df0a45b07
add 433MHz transmission
2015-06-11 18:05:27 -04:00
a8622795a7
add 433MHz transmission
2015-06-11 18:05:18 -04:00
8044014f96
Merge pull request #471 from nodemcu/dev
...
Merge dev into dev096
2015-06-08 14:04:28 +08:00
9dc71cfec0
Trying to fix
...
Problem with multiple MQTT subscriptions #459
https://github.com/nodemcu/nodemcu-firmware/issues/459
Fix possible wrong buffer pointer increment.
2015-06-07 12:45:55 +02:00
ef4e6fa95f
Merge pull request #467 from DiUS/newcrypto
...
Crypto module improvements
2015-06-05 13:01:38 +08:00
7867fd083c
Move crypto things to irom0.text segment.
...
This releases 1168 bytes back to the heap.
2015-06-05 13:03:08 +10:00
223a936779
Switched crypto module to use ROM SHA1/MD5.
...
Also disabled MD2 support by default (see MD2_ENABLE in user_config.h).
2015-06-05 12:12:24 +10:00
Johny Mattsson
vowstar
Vowstar
Konrad Beckmann
Luna
Mike Wen
Johny Mattsson
devsaurus
MarsTechHAN
Orgmar
cal