* Add support of counting of interrupts
* Update the timestamp when interrupt happens during dispatch. Also
clear out interrupts when setting up a new callback
* Improve RTC timekeeping -- includes clock rate tracking
* Improved division by 1M
* Fix crash in sntp
* Disable RTC debug
* Get the offset correct
* Add comments on where the mysterious numbers came from
* Fix a crash with auto repeat mode and errors on repeat
* fix 2007 Call callback in all cases, call callback with errorcode -1 if no connection could be establioshed
* change logging from ERR to DEBUG
* make debug output more clear (hopefully)
* add handling of errors to docs, note error handling on every call instead of only in the main documentation
* Add event callbacks to wifi.sta.config() and wifi.ap.config() and more
Added option to register event callbacks during configuration of both
station and AP.
Added option to register event callbacks to `wifi.sta.connect()` and
`wifi.sta.disconnect()`
* Add note about event registration to wifi module documentation
Other minor changes to wifi documentation are also included
* Add more detail to documentation for wifi.sta.config()
The following functions were removed:
- `wifi.sta.eventMonReg()`
- `wifi.sta.eventMonStart()`
- `wifi.sta.eventMonStop()`
The corresponding documentation has also been removed
This PR addresses issue #1893
* Update init.lua example in upload.md with new station config format
* Fixed typo in description of wifi.eventmon.register()
* Fixed typo and improved example init.lua in docs/en/upload.md
* Added message about potential for wifi crashes and more
Added message about potential for wifi crashes caused by long running
functions
Modified description for wifi.resume() and wifi.suspend()
* Fix the error callback from not being called sometimes
* Moved the setting of the reconnect status to after the connack is recevied
* Increase the irom0_seg size
* Updated the documentation
* Make it clearer that autoreconnect is deprecated
* Update wifi event monitor documentation
Added a note to `wifi.eventmon.register()` and `wifi.sta.eventmonreg()`
* Add deprecation note to `wifi.sta.eventMonReg()`
* Add wifi.sta.clearconfig(). Adjust password validation to match 2.0.0 SDK rules (no min length enforced, i.e. for WEP)
* Updat comments about WEP key not having a minimum
* Documentation: add note about node.restore() to wifi.sta.clearconfig() docs, and add SDK verbiage to describe what node.restore() impacts.
* Normaliz if statements
* Convert leading tabs to leading spaces for consistency
* Corrected examples for negative values
See issue #1734
Negative values need to be treated differently. Changed all the samples to reflect that
* Update bme280.md
* Fix bug in sntp where callback was run at interrupt level. Also add
the nodemcu pool servers as the default.
* Add comments on where the mysterious numbers came from
* Fix a crash with auto repeat mode and errors on repeat
* Rewrite net.dns.resolve on LWIP
* Move IGMP (net multicast) to LWIP
* Cleanup net module
* Move secure connection operations to tls module
* Net module on LWIP
* Server timeout parameter
* TCP hold
* Fixes in documentation
* Documentation fixes
* Note TLS module depends on net
* Add TLS module to user_modules.h
* Callback on connect event
* Fix depends net module on tls module
* Fix unhold exponential time issue
* Check the return code of the read function when doing crypto.fhash so that we don't pass negative lengths to the hashing functions
* Fix various assert failures in the LVM arising from rotables. No functional change
* Add the gpio interrupt time to the callback (and pass it from the interrupt handler)
* Get the PC right in the perf module
* Make the headers static in the websocket module
* Fix the documentation
* Update LWIP from SDK
* mbedTLS integration
* Fix argument type in dbg_printf (#1624)
* Migrate to espressif’s download center (#1604)
* Fixed BBS links to firmware
* Adjust net module docs with mbedTLS info
* Remove unrelevant axTLS notice
- Bug fixes and improvements
- FIX: Ensure that station is enabled before doing network scan (this seems to be the cause of #1578)
- FIX: Check if state == NULL on enduser_setup.stop()
- IMPROVEMENT: Look for both enduser_setup.html.gz and enduser_setup.html as valid filenames, for semantic reasons
- IMPROVEMENT: Show a generic status message on HTML page if failure occurred before user even submitted data (i.e., would have come from previously stored config when the STA was started by EUS)
Looks good to me. Thank you.
Also:
- allow for '\0's in received messages
* add client:config for setting websocket headers
Also:
- headers are case-insensitive now
* fix docs
* fix typo
* remove unnecessary luaL_argcheck calls
* replace os_sprintf with simple string copy
Squashed commits included:
Bug fixes and final implementation
- Added Content-Length: 0 to all headers
- Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL)
- Track when connecting so APList scan doesn't take place during (which changes the channel)
- More debugging output added to assist in tracking down some issues
Added /status.json endpoint for phone apps/XHR to get JSON response
Station Status caching for wifi channel workaround + AJAX/CORS
- During checkstation poll, cache the last station status
- Shut down the station if status = 2,3,4 and channel is different than SoftAP
- Add Access-Control-Allow-Origin: * to endpoint responses used by a service
- Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code.
- Add handler for OPTIONS verb (needed for CORS support)
Wi-Fi Channel Issue Workaround
- Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel
- Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel.
- After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up.
HTTP Response and DNS enhancements
- If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server.
- Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical)
- Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed)
* Normalized formatting (tabs-to-spaces)
* Added documentation
* Corrected misuse of strlen for binary (gzip) data.
* Added NULL check after malloc
* Removed inline documentation for several functions and update comments
Since documentation is now part of the repository, the inline
documentation just adds to the already huge wifi.c
* Wifi module: add new functionality, update documentation
Functions Added:
wifi.getdefaultmode(): returns default wifi opmode
wifi.sta.apchange(): select alternate cached AP
wifi.sta.apinfo(): get cached AP list
wifi.sta.aplimit(): set cached AP limit
wifi.sta.getapindex(): get index of currently configured AP
wifi.sta.getdefaultconfig(): get default station configuration
wifi.ap.getdefaultconfig(): get default AP configuration
functions modified:
wifi.setmode: saving mode to flash is now optional
wifi.sta.config: now accepts table as an argument and save config to
flash is now optional
wifi.sta.getconfig: added option to return table
wifi.ap.config: save config to flash is now optional
wifi.ap.getconfig: added option to return table
Documentation changes:
- Modified documentation to reflect above changes
- Removed unnecessary inline documentation from `wifi.c`
- Updated documentation for `wifi.sta.disconnect`to address issue #1480
- Fixed inaccurate documentation for function `wifi.sleeptype`
- Added more details to `wifi.nullmodesleep()`
* Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()`
* Fixed problem where wifi.x.getconfig() returned invalid strings when
ssid or password were set to maximum length.
* fix error in documentation for `wifi.sta.getapindex`
* Renamed some wifi functions
wifi.sta.apinfo -> getapinfo
wifi.sta.aplimit -> setaplimit
wifi.sta.apchange -> changeap
also organized the wifi_station_map array
* Add load/dump/mix/power operations on the buffer object
* Calculate the pixel value in mix and then clip to the range.
* Fixed the two wrong userdata types
* Added a couple more useful methods
* Add support for shifting a piece of the buffer.
* Fix a minor bug with offset shifts
* remove luaL_buffer from file_g_read()
- avoid memory leak when function gets terminated by lua_error
- skip scanning for end_char when reading until EOF
* attempt to free memory in any case
* Always build spiffsimg (and make it build)
* Make sure that we have the offset before allowing the user to put it
into the output filename
* Fix the documentation and align the makefile with the docs
* Clean up the docs a bit more
* Revert to include building the 8mb size (for ESP8285)
* Added a spiffsimg target that does what you would expect
* Added support for HOSTCC (defaults to gcc)
* Initial version of gdbstub support
* Add DEBUG argument to Makefile to add more debug data and turn off -Os
* Add the output redirection handling
* Added documentation
* Cleaned up the english a bit
* Make gdboutput actually trap all the output
* Review comments
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
* Allow to override User-Agent and Host HTTP headers
Fixes#1410
Idea borrowed from (unmerged) #1157
* Do not send port for host header for default ports
* added fadeIn, faceOut and shift to ws2812 module
* improvements to rotate, unified fade method
shift renamed to rotate and usage of more efficient memory operations.
fadeIn and fadeOut unified into fade method with optional parameter for direction.
* rename method to "shift" with optional mode parameter
Marcel Stör
Philip Gladstone
Lukáš Voborský
Mark Deneen
dbaumgarten
dnc40085
fetchbot
wolfg
Gregor Hartmann
Arnim Läuger
Terry Ellison
Frank Exoo
Metin KOC
tjhowse
flip111
Valera
thirschbuechler
Johny Mattsson
Yury Popov
Luís Fonseca
Marcel Stör
Jason Follas
Felix Knecht
Alexis Lothoré
Verne Roberts
Tobias Tangemann
ffedoroff
Jun Kim
Mariusz Kryński
Mike Pye
Jim Paris
Antoine
TonyLianLong
snosrap
Thomas Soëte
Harald Kubota
Konrad Hübner