* Add wifi.sta.clearconfig(). Adjust password validation to match 2.0.0 SDK rules (no min length enforced, i.e. for WEP)
* Updat comments about WEP key not having a minimum
* Documentation: add note about node.restore() to wifi.sta.clearconfig() docs, and add SDK verbiage to describe what node.restore() impacts.
* Normaliz if statements
* Convert leading tabs to leading spaces for consistency
* Fix bug in sntp where callback was run at interrupt level. Also add
the nodemcu pool servers as the default.
* Add comments on where the mysterious numbers came from
* Fix a crash with auto repeat mode and errors on repeat
* Rewrite net.dns.resolve on LWIP
* Move IGMP (net multicast) to LWIP
* Cleanup net module
* Move secure connection operations to tls module
* Net module on LWIP
* Server timeout parameter
* TCP hold
* Fixes in documentation
* Documentation fixes
* Note TLS module depends on net
* Add TLS module to user_modules.h
* Callback on connect event
* Fix depends net module on tls module
* Fix unhold exponential time issue
* Check the return code of the read function when doing crypto.fhash so that we don't pass negative lengths to the hashing functions
* Fix various assert failures in the LVM arising from rotables. No functional change
* Add the gpio interrupt time to the callback (and pass it from the interrupt handler)
* Get the PC right in the perf module
* Make the headers static in the websocket module
* Fix the documentation
* Switch off interrupts before rtctime dsleep.
* Deal with the fact that MCU keeps running after being told to enter deep sleep
(It can keep running for quite a few instructions at times (and none at
all at others), and it appears that trying to cache additional code from
SPI flash while trying to go to sleep fails miserably at both....)
* Ensure flash is not active when going into deep sleep.
* Update LWIP from SDK
* mbedTLS integration
* Fix argument type in dbg_printf (#1624)
* Migrate to espressif’s download center (#1604)
* Fixed BBS links to firmware
* Adjust net module docs with mbedTLS info
* Remove unrelevant axTLS notice
- Bug fixes and improvements
- FIX: Ensure that station is enabled before doing network scan (this seems to be the cause of #1578)
- FIX: Check if state == NULL on enduser_setup.stop()
- IMPROVEMENT: Look for both enduser_setup.html.gz and enduser_setup.html as valid filenames, for semantic reasons
- IMPROVEMENT: Show a generic status message on HTML page if failure occurred before user even submitted data (i.e., would have come from previously stored config when the STA was started by EUS)
Looks good to me. Thank you.
Also:
- allow for '\0's in received messages
* add client:config for setting websocket headers
Also:
- headers are case-insensitive now
* fix docs
* fix typo
* remove unnecessary luaL_argcheck calls
* replace os_sprintf with simple string copy
Squashed commits included:
Bug fixes and final implementation
- Added Content-Length: 0 to all headers
- Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL)
- Track when connecting so APList scan doesn't take place during (which changes the channel)
- More debugging output added to assist in tracking down some issues
Added /status.json endpoint for phone apps/XHR to get JSON response
Station Status caching for wifi channel workaround + AJAX/CORS
- During checkstation poll, cache the last station status
- Shut down the station if status = 2,3,4 and channel is different than SoftAP
- Add Access-Control-Allow-Origin: * to endpoint responses used by a service
- Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code.
- Add handler for OPTIONS verb (needed for CORS support)
Wi-Fi Channel Issue Workaround
- Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel
- Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel.
- After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up.
HTTP Response and DNS enhancements
- If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server.
- Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical)
- Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed)
* Normalized formatting (tabs-to-spaces)
* Added documentation
* Corrected misuse of strlen for binary (gzip) data.
* Added NULL check after malloc
* Removed inline documentation for several functions and update comments
Since documentation is now part of the repository, the inline
documentation just adds to the already huge wifi.c
* Wifi module: add new functionality, update documentation
Functions Added:
wifi.getdefaultmode(): returns default wifi opmode
wifi.sta.apchange(): select alternate cached AP
wifi.sta.apinfo(): get cached AP list
wifi.sta.aplimit(): set cached AP limit
wifi.sta.getapindex(): get index of currently configured AP
wifi.sta.getdefaultconfig(): get default station configuration
wifi.ap.getdefaultconfig(): get default AP configuration
functions modified:
wifi.setmode: saving mode to flash is now optional
wifi.sta.config: now accepts table as an argument and save config to
flash is now optional
wifi.sta.getconfig: added option to return table
wifi.ap.config: save config to flash is now optional
wifi.ap.getconfig: added option to return table
Documentation changes:
- Modified documentation to reflect above changes
- Removed unnecessary inline documentation from `wifi.c`
- Updated documentation for `wifi.sta.disconnect`to address issue #1480
- Fixed inaccurate documentation for function `wifi.sleeptype`
- Added more details to `wifi.nullmodesleep()`
* Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()`
* Fixed problem where wifi.x.getconfig() returned invalid strings when
ssid or password were set to maximum length.
* fix error in documentation for `wifi.sta.getapindex`
* Renamed some wifi functions
wifi.sta.apinfo -> getapinfo
wifi.sta.aplimit -> setaplimit
wifi.sta.apchange -> changeap
also organized the wifi_station_map array
* Add load/dump/mix/power operations on the buffer object
* Calculate the pixel value in mix and then clip to the range.
* Fixed the two wrong userdata types
* Added a couple more useful methods
* Add support for shifting a piece of the buffer.
* Fix a minor bug with offset shifts
* remove luaL_buffer from file_g_read()
- avoid memory leak when function gets terminated by lua_error
- skip scanning for end_char when reading until EOF
* attempt to free memory in any case
The esp_init_data_default.bin is now extracted from the SDK (and its
patch file, if present), and the contents are automatically embedded
into user_main.o.
To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip
which doesn't have esp_init_data written to it.
It is no longer possible to do the writing of the esp_init_data_default
from within nodemcu_init(), as the SDK now hangs long before it gets
there. As such, I've had to reimplement this in our user_start_trampoline
and get it all done before the SDK has a chance to look for the init data.
It's unfortunate that we have to spend IRAM on this, but I see no better
alternative at this point.
Input during startup (especially while doing initial filesystem format)
ran the risk of filling up the task queue, preventing the start_lua task
from being queued, and hence NodeMCU would not start up that time.
* Initial version of gdbstub support
* Add DEBUG argument to Makefile to add more debug data and turn off -Os
* Add the output redirection handling
* Added documentation
* Cleaned up the english a bit
* Make gdboutput actually trap all the output
* Review comments
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
The original code did not deal with UDP binding failures, this new code
does one random port attempt and then sets port to 0 to get 'OS
default' behaviour, and ASSERTs that that has to work.
Patch also moves the local UDP port range definition to udp.h from
udp.c.
* Allow to override User-Agent and Host HTTP headers
Fixes#1410
Idea borrowed from (unmerged) #1157
* Do not send port for host header for default ports
* added fadeIn, faceOut and shift to ws2812 module
* improvements to rotate, unified fade method
shift renamed to rotate and usage of more efficient memory operations.
fadeIn and fadeOut unified into fade method with optional parameter for direction.
* rename method to "shift" with optional mode parameter
Fixes#1164 and thus also #1150, #1149, #1147 and #898.
* Move to latest version of SPIFFS
* Add SPIFFS porting layer for NodeMCU
* Add option to delete output if it doesn't fit
* Change FLASHSIZE to be in bits by default: default 4mb 32mb
* Add SPIFFS_MAX_FILESYSTEM_SIZE override
* Add notes on SPIFFS_FIXED_LOCATION
* Add 1M boundary
* Include the current version of the LICENSE
- Stop fighting against the SDK in terms of owning/writing the init_data block.
NodeMCU included a default init_data block because originally the SDK did
not, but by now it's not needed.
- Expose a way to reconfigure the ADC mode from Lua land. With most people
using the cloud builder and not able to change the #define for byte 107
this has been a pain point.
- Less confusion about which init_data has been used. Lua code can now simply
state what mode it wants the ADC to be in, and not worry about the rest of
the init_data complexities such as the init_data changing location due to
flashing with wrong flash_size setting, or doing/not doing a chip-erase
before loading new NodeMCU firmware.
* Change upper limit for timer in `tmr_register` and `tmr_interval` to reflect new limit in SDK 1.5.3.
* Change documentation for `tmr.alarm()`, `tmr.interval()` and `tmr.register()` to match source.
* Improve error reporting to be more descriptive.
* Send a multicast response if it is a QM query
* Use the NSEC record in the style which mDNS demands
* Shuffle the code a bit and allow sending of A response...
* Made the A record work
* Now gets TTLs right and (I think) handles multiple questions
* Fix bug on first write
Pin is 'HIGH' at reset, so we need to pull it down and generate a
reset.
* Move init code to flash section, not needed to be in iram.
* Remove pin choice in API
* Remove lock in ws2812_buffer_write
* Remove naked malloc
* Drop ws2812_writergb
* Drop support of ws2812.buffers to ws2812_writegrb should use ws2812.buffers:write
* Add support for <>3 colors per leds strips (RGBW)
* Remove ICACHE_FLASH_ATTR
* Add static const on _uartData to avoid initialization penalty
* Provide an error code to SNTP error callback.
* Switch SNTP to use ephemeral port.
In case we're being hit by ISP-level thou-shall-not-run-NTP silliness.
Merging as suggested by @TerryE (and squashing at the same time. Turns out that this feature is enabled for this repo).
* Squashed commit of the following:
commit f985f10d9d2ee035f5a6ee6245c60d9904d98cc1
Author: philip <philip@gladstonefamily.net>
Date: Sun Mar 27 21:52:46 2016 -0400
Better mdns code
commit 6ee49ee106
Author: philip <philip@gladstonefamily.net>
Date: Fri Mar 25 23:25:11 2016 -0400
Update the docs
commit 7e455541c6
Author: philip <philip@gladstonefamily.net>
Date: Thu Mar 24 21:58:16 2016 -0400
Add retries and buffer checking to mdns
Get the length right
Now it seems to work
* Might work for combined mode
* Fix crash
* Simplified various bits of code. Changed the LUA interface
Added checking (to some degree) incoming quyery types
Move the defaults to the right place
Added reference to the RFC`
* Corrected CPOL/CPHA relationships
* Simplified to remove duplicated code
* Removed comments about when MISO is sampled. ESP seems to sample MISO on same clock edge as when MOSI is set.
Implement SDK event monitor
Move wifi status event monitor code into seperate file
(app/modules/wifi_eventmon.c)
Modify wifi lua callback registration code.
Add Functions wifi.ap.deauth and wifi.sta.getrssi
Rework wifi event monitor to use tasking interface
fix for Lua coroutine compatibility issue
Made changes Suggested by TerryE
Also, moved code that sets the default host name out of
luaopen_wifi_init and into a separate function and added a post_task_low
entry in it's place.
Replaced some if test then return error lines with
luaL_argcheck
Add check for malloc null return in wifi.eventmon
to catch out of memory errors
Due to the hard-close, the status message did not get sent out reliably.
Connection closing logic now reworked to be nicer, while still avoiding
the problem of lots of connections lingering in fin_wait.
Shutting down an espconn server safely is impossible, and currently would
include at least one use-after-free. Even with that patched, at best this
would change things from impossible to "very tricky".
The native LWIP API does not have those issues, and is still quite easy
to work with.
A single bug is fixed, a few features are added and overall the codebase has been worked through.
- Added support for calls to /generate_204 that let's android know that the internet is accessible.
- Added 10 second delay to the shutdown call to allow a final status update to be fetched by the client.
- Added iframe to html to avoid having a form submission change the page.
- Added support for dynamic /status responses.
- Improved HTML appearance by removing AP-list button.
- Improved CSS to center form, even when list of access points have loaded.
- Improved debug prints to contain line numbers and not require lua_State*.
- Fixed broken failure check when calling wifi_station_connect().
- Fixed unguarded malloc().
FrankX
Philip Gladstone
Jason Follas
Arnim Läuger
Yury Popov
ffedoroff
Marcel Stör
Verne Roberts
kicer
Johny Mattsson
vsky
Mariusz Kryński
Marcel Stör
zelll
dnc40085
Jim Paris
Johny Mattsson
Luís Fonseca
Thomas Soëte
bert hubert
Jonathan Karras
moononournation
Konrad Hübner
Jason Schmidlapp
Sebastian
philip
dnc40085
Robert Foss
Robert Foss
Terry Ellison
Bernd Meyer