* Refactor into new 'console' module.
A breaking change, but should finally see us move away from the chronic edge
cases and inconsistent behaviour we have while trying to shoe-horn the
usb-serial-jtag and cdc-acm consoles into uart behaviour and assumptions.
* Fix and document console.write()
Added example on using framed data transmission over the console.
* fixup uart examples
* Add workaround for silently dropped console output.
* Add file upload helper script for console module.
Plus, it can serve as a reference for any IDEs which may need/want
updating.
* Fixup really silly copy/paste error.
* Make upload-file.py work better on CDC-ACM console.
* Updated console module doc with CDC-ACM info.
* Load file in binary mode in upload-file.py.
* Ported rotary driver. Compiles but not tested.
* Added the rotary switch driver to the esp32 version
* Review comments. Also ensure that we have GPIO if we have ROTARY.
* Allow use of GPIO 0
* Another bad piece of documentation
* Fix docs and also free the timer
* Now adds a self reference to prevent GC until after close has been called and
any queued messages have been flushed.
* Simplified the code a bit
* Choose the number of RMT buffers in the ws2812 module.
The number of buffers required for optimal operation should be selected
by the ws2812 module, not the caller.
* Add parameters for RGB LED bit times.
This patch adds compatibility for different RGB LEDS besides the WS2812.
ESP evaluation boards like the ESP32-C3-DevKitM-1 use an SK68XXMINI-HS
RGB LED which does not respond to the timings of this module.
The patch adds optional parameters for the bit timings to the write
function. If the new parameters are not supplied, the old values are used.
An example for the SK68XXMINI-HS is provided in the documentation.
* Remove restrictions from RTM translator.
The old RMT translator was not able to split the bits of the source
data into the size requested by the RMT transmitter. Either all 8 bits
of an input byte were translated or none.
The new routine removes the restriction by delivering exactly the
requested amount of data to the transmitter, which results in a more
balanced buffering of translated data under load.
* Add a parameter for the RGB LED reset time.
This patch introduces a new optional parameter for the reset time
in the RGB LED communication. The default is 51.2 microseconds. A
value of 0 sends no reset signal, which allows a small optimisation
for consecutive write commands.
Please note that the reset time of the old code should be 50
microseconds, as the define WS2812_DURATION_RESET suggested. Due to the
restrictions of the old RMT translator routine, it was slightly
increased to 51.2 microseconds. This patch keeps the value of 51.2
microseconds to be as compatible as possible.
* Minimize the time drift between RMT channels.
Place all RMT channels in a group to minimize the time drift between
the signals. Please note that this feature is not available on all
platforms.
* Fix the description of the SK6812 LED in the example code.
The SK6812 expects the data for the green LED first, then red and
finally blue. It should be described as a GRB LED.
Plenty of dependency adjustments, printf format specificier updates,
FreeRTOS type and macro name modernisation, not to mention API changes.
Still plenty of legacy/deprecated drivers in use which will need updating.
The following features have been removed due to no longer being available
from the IDF:
- ADC hall effect sensor reading
- Configuration of SD SPI host via sdmmc module (now must be done first
via the spimaster module)
- FAT partition selection on external SD cards; only the first FAT
partition is supported by the IDF now
On the other hand, the eth module now supports the following new chipsets:
- KSZ8001
- KSZ8021
- KSZ8031
- KSZ8051
- KSZ8061
- KSZ8091
- Possibly additional models in the LAN87xx series (the IDF docs aren't
clear on precisely which models are handled)
Further, the sdmmc module is now available on the ESP32-S3 as well.
In addition to exposing additional configuration settings, it now also
provides access to the wifi station power-saving control.
Documentation updated, and wifi.sta.getconfig() has been documented. Not
sure why that wasn't already the case.
By returning result as a signed 32-bit int between INT32_MIN to IN32_MAX
which is represented the same regardless of 64-bit support or
integral-only builds.
Also updated docs, fixed links and clarified behavior of random APIs
when WiFi isn't started.
* Adding the first version of the rmt documentation.
* Stub RMT module compiles.
* This version seems to work in (at least) simple cases.
* CLean up the docs
* Minor fixes
* Give the SPI module a chance of working...
* Update to the released version of idf4.4
* Try to get the CI Build to work in all cases
* Try to get the CI Build to work in all cases
* FIx a ringbuffer return issue
* Remove bogus comment
* Review comments
* Better example of transmission
* Review comments
* Add table send example
* Improved documentation
* Documentation comments
* Install the driver correctly.
* A couple of doc updates
* Fix typo
Also removed old, very unsafe node.osoutput(). We're now integrating cleanly
with the IDF/newlib way of redirecting stdout.
Added necessary depends in Kconfig to ensure VFS support is enabled, as
otherwise you'd only get a mysterious crash when attempting to enable
output redirection.
The IDF-provided VFS resolves several issues:
- The IDF components having a different view of the (virtual) file system
compared to the Lua environment.
- RTOS task/thread safety. Our legacy VFS was only ever safe to use
from the LVM thread, which limited its usability. Upgrading it
would have effectively required a reimplementation of the IDF VFS,
which would have been a bigger task with larger on-going maintenance
issues.
- We're no longer needing to maintain our own SPIFFS component.
- We're no longer needing to maintain our own FATFS component.
- The legacy of the 8266's lack of standard C interface to the file system
is no longer holding us back, meaning that we can use the standard
Lua `io` module rather than the cobbled-together swiss army knife
also known as the file module.
Of course, the downside is that we'll either have to declare a backwards
breakage in regard to the file module, or provide a Lua shim for the old
functions, where applicable.
Also included is some necessary integer type fixups in unrelated code,
which apparently had depended on some non-standard types in either the
SPIFFS or FATFS headers.
A memory leak issue in the sdmmc module was also found and fixed while
said module got switched over to the Espressif VFS.
Module documentation has been updated to match the new reality (and I
discovered in some places it wasn't even matching the old reality).
Only compile-tested so far.
Of note is that the WiFi auto-connect (flag) functionality has been removed
from the IDF, and as a follow-on so has the "auto" field in the wifi config.
On the Ethernet side, support for the TLK110 PHY seems to have been removed,
but on the other hand there is now new support for several others.
Jade Mattsson
serg3295
Jade Mattsson
Philip Gladstone
Marcel Stör
Christoph Thelen
Mike_Went
serg3295
Johny Mattsson
Tom Sutcliffe