Commit Graph

57 Commits

Author SHA1 Message Date
Nikolay Fiykov 5f43a414e7 Add pwm2 module (#2747) 2019-05-25 22:08:13 +02:00
Natalia ab61e9c03a I2C sw driver with support of multiple buses, Slow, Fast, FastPlus, and user-defined speed selection (#2465)
* I2C driver speed-up, i2c.SLOW, i2c.FAST and user-defined speed selection

* - Multiple buses (up to 10) with different speeds on each bus
- Standard(Slow, 100kHz), Fast(400kHz) and FastPlus(1MHz) modes or an 
arbitrary clock speed
- Sharing SDA line over multiple I²C buses to save available pins
- GPIO16 pin can be used as SCL pin, but it does not support clock 
stretching and selected bus will be limited to FAST speed.

* Dynamic memory allocation, error checks, simplification, timing tweaks.

* Separated the code of old driver for better compatibility and simplicity

* Change of driver interface

* Add bus status check in setup(); simplify getDC(); remove unnesessary lines in ACK read/write

* Fix for moved doc file and trailing whitespaces
2019-04-05 06:56:11 +02:00
sergio d77666c0e8 trailing spaces cleanup (#2659) 2019-02-17 18:26:29 +00:00
Terry Ellison 6db7414270
Merge branch 'dev' into dev-LFS 2018-04-19 16:43:55 +01:00
dnc40085 96e5c026a8 Refactor timer suspend portion of node.sleep (pmsleep) (#2287)
* pmsleep refactor
* Shortened swtmr disabled message 
* Added swtimer debug module option to user_modules.h.
* Added comments to user_config.h.
* Fixed error in documentation for node.sleep()
* remove blank sntp.c that got added in during rebase onto dev(6218b92)
* Added #ifdefs around SWTIMER_REG_CB to prevent inclusion of disabled
code
2018-04-13 21:41:14 +02:00
TerryE 3d3eebfd67 Turn of x bit on some non-executable source files 2018-03-17 00:43:51 +00:00
Nathaniel Wesley Filardo c972d86ea9 Update to sdk 2.2
Initial commit for
https://github.com/nodemcu/nodemcu-firmware/issues/2225 .

Replay patches from Espressif's repository at
https://github.com/espressif/ESP8266_NONOS_SDK between tags v2.1.0 and
v2.2.0:

	0001-sync-from-ccca00f2.patch

		Superseded by existing changes, but lines reordered in app/driver/key.c
		to minimize divergences.

	0002-sync-from-3f38ad5a.patch

		Upstream files only

	0003-Update-links.patch

		Not meaningful to NodeMCU

	0004-sync-from-01990ad0.patch
	0005-sync-from-cdf6877d.patch

		Upstream files only

	0006-sync-from-f29e744c.patch

		Upstream files only, user_interface.h override non-conflicting

	0009-feat-lwip-Move-lwip-source-code-to-third_party-folde.patch

		Merged change to lwip/app/espconn_udp.c; rest is just moves or
		appears to not apply.

	0010-feat-mbedtls-Add-mbedtls-source-code-in-third_party-.patch

		Does not apply; we use our own mbedtls

	0011-added-C-support.patch

		Merged to Makefile

	0012-feat-mbedtls-Rebuild-libmbedtls.patch

		Already applied

	0013-fix-at-Fix-some-bugs-of-AT.patch

		Upstream files only

	0014-feat-err_t-Redefine-err_t-to-s32_t.patch

		Merged to app/include/arch/cc.h and ./app/include/lwip/app/espconn.h;
		the rest is upstream files.

	0015-fix-wpa-Fix-wpa-wpa2-ptk-gtk-reinstallation-vulnerab.patch
	0016-fix-wifi-Remove-group-key-entry-before-connecting-to.patch
	0017-feat-lib-Remove-time-function-in-libmain.patch

		Upstream files only

	0018-feat-espconn-Modification-for-espconn.patch

		Merged to app/include/lwip/app/espconn.h,
		app/include/lwip/app/espconn_tcp.h, app/lwip/app/espconn.c,
		app/lwip/app/espconn_tcp.c

	0019-feat-at-Use-new-espconn_recv-to-fix-tcp-server-issue.patch
	0020-feat-examples-Update-mqtt-demo-and-auto-bin-generate.patch

		Upstream files only

	0021-wifi-Add-scan-threshold-and-dwell-time.patch
	0022-feat-wifi-Add-country-code-API.patch
	0023-feat-wifi-Record-more-information-of-scanned-ap.patch

		Upstream files only, user_interface.h override non-conflicting

	0024-fix-example-Fix-IoT_Demo-user-sector-error.patch

		Upstream files only

	0025-fix-lwip-Fix-sequence-number-error-of-RST-ACK.patch

		Merged app/lwip/core/tcp_in.c

	0026-fix-mbedtls-Fix-memory-leak.patch

		Merged app/mbedtls/app/lwIPSocket.c

	0027-fix-mbedtls-Fix-call-send-callback-function-failed.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0028-feat-Add-USE_OPTIMIZE_PRINTF-in-third_party-Makefile.patch

		Merged app/Makefile

	0029-fix-api-Fix-ets_delay_us-declaration.patch

		Upstream files only, osapi.h override non-conflicting

	0030-fix-wifi-Remove-max_tx_power-in-wifi_country_t-in-li.patch
	0031-fix-wifi-Fix-softAP-wrong-behavior-after-call-system.patch
	0032-fix-wifi-bugfix-of-scan-fail-after-connected-if-max-.patch
	0033-feat-at-Enable-scan-time-scan-type-and-add-scan-resu.patch
	0034-feat-at-Add-command-AT-CWCOUNTRY.patch
	0035-fix-at-Fix-that-AT-CIPSTART-causes-busy-if-the-serve.patch

		Upstream files only

	0036-feat-mbedtls-Speed-up-mbedtls-handshake-process.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0037-fix-api-Fix-os_calloc-declaration.patch

		Merged app/include/lwip/mem.h; sdk-overrides/include/mem.h
		non-conflicting.

	0038-fix-mbedtls-Fix-disconnect-callback-function-never-b.patch

		Merged app/mbedtls/app/espconn_mbedtls.c; minor revision to logic in
		6576af959b.  Whitespace fixes.

	0039-feat-at-Add-country-code-start-channel-in-AT-CWCOUNT.patch
	0040-fix-net80211-Fix-Null-pointer-in-ieee80211_rfid_locp.patch

		Upstream files only

	0041-feat-wifi-Add-new-esp_init_data_default-v08-bin.patch

		Upstream files only, but impacts Makefile

	0042-fix-mbedtls-Fix-load-cert-fail-when-the-private-key-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0043-fix-wifi-The-start-channel-can-be-any-valid-channel.patch
	0044-fix-wifi-Fix-scan-do-not-start-after-connect.patch
	0045-feat-wifi-Add-keep-connection-for-station-to-keep-co.patch
	0046-feat-at-Update-AT-version-to-1.6.0.0.patch
	0047-fix-at-Fix-GSLP-too-long-time.patch
	0048-fix-at-Fix-the-message-is-incorrect-when-creating-UD.patch
	0049-feat-at-Add-AT-CIPSERVERMAXCONN.patch

		Upstream files only

	0050-feat-system-Add-softap-distributes-station-ip-event.patch

		Upstream files only, user_interface.h override non-conflicting

	0051-feat-example-Use-libmbedtls.a-instead-of-libssl.a-in.patch

		Upstream files only

	0052-feat-mesh-Remove-mesh-support.patch

		Upstream files only, but go ahead and remove comment from
		ld/nodemcu.ld.

	0053-fix-example-Fix-forget-to-add-integer-parameter-when.patch

		Upstream files only

	0054-fix-mbedtls-Fix-reconnect_callback-is-not-triggered-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0055-feat-at-Add-AT-SYSMSG-to-enable-some-report-informat.patch
	0056-fix-at-Fix-the-incorrect-link-id-when-client-connect.patch
	0057-fix-at-Fix-the-bug-that-it-should-be-error-when-the-.patch
	0058-fix-smartconfig-Fix-the-smartconfig-scan-time-issue.patch
	0059-fix-lwip-Fix-the-bug-of-lwip-output.patch

		Upstream files only

	0060-fix-lwip-Fix-the-length-of-TCP-data-in-one-packet-is.patch
	0061-fix-lwip-Fix-send-TCP-data-with-two-or-more-pbuf.patch

		Merged app/lwip/core/tcp_out.c

	0062-fix-wifi-Fix-assert-happen-when-smartconfig-start-th.patch

		Upstream files only

	0063-fix-mbedtls-Fix-memory-leak-when-ESP8266-as-SSL-TLS-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0064-fix-mbedtls-Fix-already-freed-and-exception-bug-when.patch

		Merged app/mbedtls/app/lwIPSocket.c

	0065-fix-at-Fix-bug-that-there-is-no-result-when-sending-.patch
	0066-feat-example-Add-AT-bin-version.patch
	0067-feat-version-Update-version-to-2.2.0-and-add-version.patch
	0068-feat-bin-Update-AT-bin-for-SDK-2.2.0.patch

		Upstream files only

Apply local changes to build:

	app/include/lwip/app/espconn.h pulls changes (and license decl) from
	upstream SDK.  Makefile is altered to use this file ahead of the
	SDK's.

	Remove lwip's sntp support, since it was never really wired in anyway.
	See https://github.com/nodemcu/nodemcu-firmware/issues/2042 for more
	information.  Patch Makefile to strip time.o, the consumer of lwip's
	sntp functionality, from libmain.a, resulting in much
	easier-to-understand error messages.

	This has consequences for mbedtls.  The simplest thing to do, which is,
	impressively, not a change in behavior, is to completely disable TLS
	certificate time validation; a later patch can optionally couple this to
	RTCTIME support.

	Similarly, it happens that the sqlite3 import was calling time(), but
	this was not going to work out well for it.  Just stub it out to always
	return unix timestamp 0, as would have happened anyway.

Changes unprocessed:

	0007-sync-from-080c37e1.patch
	0008-feat-lib-Compile-some-libraries-with-ffunction-secti.patch

		These two make changes to the linker script; perhaps
		they are worth porting over, but I have not done so
		here.

This is build-tested (ADC, BIT, COLOR_UTILS, CRON, CRYPTO, DHT, ENCODER,
FILE, GPIO, HTTP, I2C, MQTT, NET, NODE, OW, PCM, PERF, PWM, RTCFIFO,
RTCMEM, RTCTIME, SNTP, SPI, SQLITE3, STRUCT, TLS, TMR, UART, WIFI,
WS2812, WS2812_EFFECTS) and boots, but only limited run-time testing has
been performed.  Testing done does, however, include having made a few
TLS connections through the HTTP module, so things are not hopelessly
broken, at the very least.
2018-03-13 19:28:11 -04:00
Arnim Läuger f577c2c080 Sync uart configuration to Tx FIFO level (#1806)
* sync uart configuration to tx fifo level

* poll tx fifo empty before disabling interrupts

* echo parameter is optional for uart.setup()
2017-03-01 12:41:56 +01:00
Arnim Läuger 2168e5185e Apply power selection at the end of the write slot while IRQs are masked (#1808) 2017-03-01 12:41:17 +01:00
Arnim Läuger 416d53eb39 Add string support for spi.set_mosi() and spi.get_miso() (#1753)
clean-up endianess handling in spi driver
2017-02-06 13:55:26 +01:00
Philip Gladstone 017b4637c2 Adds uart.getconfig(0) to get the current uart parameters (#1658) 2016-12-11 20:35:04 +01:00
Yury Popov 83eec61874 Fix iram/irom section contents (#1566) 2016-12-01 22:14:20 +01:00
zelll 798759950f i2c - allow slave stretching SCL (just loop and check) (#1589) 2016-11-13 10:16:07 -05:00
Arnim Läuger 020afdcf33 avoid task queue overrun for serial input (#1540)
Thank you.
2016-10-17 21:56:38 -04:00
Johny Mattsson 90c6e86872 Fix start-up race between UART & start_lua. (#1522)
Input during startup (especially while doing initial filesystem format)
ran the risk of filling up the task queue, preventing the start_lua task
from being queued, and hence NodeMCU would not start up that time.
2016-10-03 10:19:20 +02:00
Philip Gladstone 04e93b2433 Add the esp-gdbstub to enable debugging (#1506)
* Initial version of gdbstub support

* Add DEBUG argument to Makefile to add more debug data and turn off -Os

* Add the output redirection handling

* Added documentation

* Cleaned up the english a bit

* Make gdboutput actually trap all the output

* Review comments
2016-09-21 11:38:12 +10:00
Arnim Läuger ecf8bd98d6 Add FatFs and SD card support (#1397)
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
2016-09-05 20:17:13 +02:00
Jonathan Karras 04b86b80f6 Fix open drain level issues when _not_ using parasitic power mode. (#1291)
Port of @pstolarz work on PaulStoffregen/OneWire#8
2016-06-28 22:51:55 +02:00
Philip Gladstone 4a8abc2060 Add support for driving instrument gauge stepper motors (#1355) 2016-06-26 14:19:06 +02:00
Arnim Läuger d445ae97fb Enable spi clock_div < 4. (#1283) 2016-06-15 21:01:52 +02:00
Arnim Läuger d416648990 Add pcm module. (#1255)
* Add pcm module.
* Add network streaming example.
* document hw_timer dependency with pwm
* Add vu peak callback.
2016-06-05 23:21:36 +02:00
Philip Gladstone 5b4b1e0388 Autobaudrate detection by default -- to reduce problems with speed change (#1215)
* Auto autobaud detection by default

* Added stopping the autobaud if explicitly configured

* Add note about auto-baud to the uart.md
2016-04-17 23:44:18 +02:00
Jason Follas e16204d4f4 Corrected SPI CPOL/CPHA relationships
* Corrected CPOL/CPHA relationships

* Simplified to remove duplicated code

* Removed comments about when MISO is sampled. ESP seems to sample MISO on same clock edge as when MOSI is set.
2016-04-02 19:26:07 +02:00
philip 84487d300b Remove unusedcode 2016-03-20 12:54:16 -04:00
philip d40ee50a8e Squashed commit of the following:
commit 2c7c3fc3985cc32866e8af496abea9971eaee90a
Merge: 9179dae 41022c3
Author: philip <philip@gladstonefamily.net>
Date:   Sun Feb 28 14:47:47 2016 -0500

    Merge remote-tracking branch 'upstream/dev' into rotary_2

commit 9179dae0824e6b35ad09e5113aacc26dc91692c0
Author: philip <philip@gladstonefamily.net>
Date:   Fri Feb 26 20:53:27 2016 -0500

    Review comments

commit 67741170e20ccb2b636e701f0664feff2aafbb4c
Author: philip <philip@gladstonefamily.net>
Date:   Fri Feb 26 20:59:49 2016 -0500

    Squashed commit of the following:

    commit 8c9a64731c4a8b9aedda18a399b433b173d2199f
    Merge: 085935f 19d3c1d
    Author: philip <philip@gladstonefamily.net>
    Date:   Fri Feb 26 20:58:10 2016 -0500

        Merge remote-tracking branch 'upstream/dev' into rotarymod

        Conflicts:
        	app/platform/platform.c

    commit 085935fc56986d607ff5e05d1663970331959c34
    Author: philip <philip@gladstonefamily.net>
    Date:   Fri Feb 26 20:53:27 2016 -0500

        Review comment

    commit 7732fd2d1044f28b8fcf5b0aa0f76d76fe80f449
    Author: philip <philip@gladstonefamily.net>
    Date:   Sat Feb 20 12:10:38 2016 -0500

        Module to handle rotary decoders

        Eliminate ROTARY_DEBUG

        Remove unused file

Eliminate a malloc call

Cleaned up the register code. Now 0x114 bytes

Fix bug with clearing bits in one case

Fix the type in the #define name
2016-02-29 08:21:12 -05:00
Arnim Läuger 8743319b02 Merge pull request #1000 from devsaurus/sigma_delta
Add sigma_delta module.
2016-02-20 20:11:42 +01:00
devsaurus 8982650df9 Add sigma_delta module. 2016-02-18 21:35:58 +01:00
philip 669543bbf2 Hardware timer support and convert the PWM module to use it 2016-02-17 21:07:33 -05:00
TerryE 49733f6f6d Add New Tasking I/F and rework GPIO, UART, etc to support it
As with the last commit this rolls up the follwowing, but include the various
review comments on the PR.

-   **Documentation changes**. I've added the taks FAQ as a stub new Extension
developer FAQ, and split the old FAQ into a Lua Developer FAQ and a Hardware
FAQ.

-   **Tasking I/F**.  New `app/task/Makefile`, `app/task/task.c`,
`app/include/task/task.h` and `app/Makefile` as per previous commit.  Cascade
changes to `app/driver/uart.c`, `app/include/driver/uart.h`,
`app/user/user_main.c` and `app/modules/node.c`

-   **GPIO Rework** to `app/modules/gpio.c` and `pin_map.[hc]`, `platform.[hc]`
in `app/platform`

-   **Other Optimisations** Move the `platform_*_exists()` from
`app/platform/common.c` to static inline declarations in `platform.h` as
this generates faster, smaller code. Move lgc.a routines out of iram0.
2016-02-17 17:13:17 +00:00
Marcel Stör 2e37a52aaa Merge pull request #1030 from devsaurus/spi_pinconfig
Enable spi functionality on pins after internal config has been applied.
2016-02-10 07:06:13 +01:00
devsaurus 5d8848ecaf Enable spi functionality on pins after internal config has been applied. 2016-02-09 23:26:40 +01:00
devsaurus dc2e1efefb Extend data type for spi miso/mosi buffer offset to 16 bit. 2016-02-09 22:05:05 +01:00
devsaurus 9f54c8f5d4 enable -std=gnu11 for driver dir with corrected os_printf* decls 2016-01-23 11:22:03 +01:00
Johny Mattsson 182d45f928 Enable -std=gnu11 for modules dir.
Plus boat-load of fixes to actually make that build.
2016-01-20 19:40:47 +11:00
jfollas bf74b617d0 SPI: Implemented CPOL=1
Reference: http://bbs.espressif.com/viewtopic.php?f=49&t=1570
2016-01-13 22:39:15 -05:00
devsaurus 6cbe716db0 uart: fix parity and stopbit generation 2015-12-21 17:51:43 +01:00
btsimonh b2345857e9 Added uart.alt(n) to swap to use alternate rx/tx lines.
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
TerryE 583049f620 Merge Onewire changes from Master into Dev
Master contained two OW changes one of which was already reimplemented in dev using the
correct macros.  The second was from hazarkarabay (f6d0c0c) that onewire_search()
returns a device address vector even when no device is found.  I've reimplemented this
but using the correct index, rom_byte_number, rather than declaring a new temp index i.
2015-11-23 01:23:41 +00:00
devsaurus 9444ae28df simplify spi api
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
devsaurus 7d77398921 introduce full/half duplex transactions and add spi.send_recv() 2015-10-25 22:58:06 +01:00
devsaurus 19092712e5 remove obsolete spi_mast_send and rename platform_spi_send 2015-10-18 11:13:56 +02:00
devsaurus f238673772 rework of (H)SPI API 2015-10-18 11:13:55 +02:00
devsaurus 9cde0bbb83 add SPI transaction support 2015-10-18 11:13:55 +02:00
Johny Mattsson fe6289a6c2 Switch Lua input to event driven instead of polled.
The Lua input timer has been the thorn in the side which prevents a lot of
potential sleeping, unnecessarily.
2015-10-12 13:26:05 +11:00
Johny Mattsson d2ac5f1712 Changed os_intr_xxx to ets_intr_xxx.
The os_intr_xxx macros no longer exist in the SDK.
2015-10-12 13:26:04 +11:00
Johny Mattsson c674d191e4 Upgraded open-source LWIP.
From Espressif's lwip_open_src_template_proj_for_v1.3.0.zip
2015-10-12 13:26:04 +11:00
devsaurus 4cf5f37450 address SPI_CLKDIV_PRE requirements
* respect N-1
* avoid range overflow
2015-10-04 16:57:50 +02:00
devsaurus ac50f9c6a5 add divider for arbitrary HSPI clock frequencies 2015-10-04 00:40:21 +02:00
Johny Mattsson 346251dca6 1-Wire power fix, by Thomas Shaddack. 2015-08-20 11:09:12 +10:00
vowstar 32e9ac204a Fix PWM init bug, set all initial duty to 0. 2015-05-01 18:35:30 +08:00