f501b84090
signal an error in case TCP send data was only written partly
2017-07-21 22:50:36 +02:00
d26c8ea290
promote closing flag to serve all socket types
...
and set it consistently also for intended netconn close to prevent any cb activity
2017-07-20 21:23:38 +02:00
abbd384da3
first batch of review feedback
2017-07-20 21:04:21 +02:00
070973e68c
Port net module to netconn API.
2017-07-18 20:45:20 +02:00
5ee043cfb9
fix pin handling for rmt channels now that GPIO output matrix is cleared with
...
17747b3358
2017-07-13 23:00:24 +02:00
e6eb743b88
Added functions wifi.sta.getmac() and wifi.ap.getmac()
2017-06-30 23:55:43 +02:00
a56a7b2775
init ws2812_chains during platform_init
2017-06-20 23:09:14 +02:00
10e96a3b51
fix travis build
2017-06-13 19:03:25 +02:00
a8ff8f059d
Add u8g2 module.
2017-06-13 18:38:09 +02:00
329bd73b63
ESP32: uart 1/2 supports ( #1982 )
...
* uart 1/2
* call -> pcall in uart_on_* functions
* fix docs
* fixed console driver when using custom console uart
* fixed line_inverse and error callback
* fixed a crash when uart.start() called more than one time
2017-06-13 18:33:32 +02:00
819284530e
Add spi master.
2017-05-14 18:00:40 +02:00
9e7eb48fef
Updated ESP-IDF to latest.
...
can: Use DPORT_(SET|clear)_PERI_REG_MASK for DPORT regs.
2017-05-13 22:30:13 +02:00
209bde603d
Fix gpio pin mask generation and clarify available gpios. ( #1965 )
2017-05-12 11:10:44 +10:00
ff30f479e1
ESP32: CAN module ( #1958 )
...
* can extension
* can extension: bit timing and filter
* can -> CAN
* post CAN data callback
* CAN docs
* CAN: fixed receive, filter, extended frame
* reorder fn in can.md, remove driver_can/Kconfig
* fixed a leak when can.stop()
2017-05-07 09:35:17 +02:00
1117137363
fix compile warnings
2017-05-05 22:51:21 +02:00
fb62011ddf
Add sdmmc module and enable fatfs.
2017-04-30 22:49:54 +02:00
31cb312c72
fix insertion of rmt end marker
2017-04-27 23:13:24 +02:00
1ab8f526b0
fix ws2812 doc
2017-04-27 22:42:10 +02:00
b7fa8c592f
ADC extension for ESP32 ( #1927 )
...
* added adc extension
* add adc_number, for adc2
2017-04-24 21:36:01 +02:00
9faa63f116
bthci: fixed initialisation ( #1928 )
2017-04-24 15:46:05 +10:00
9cca38767f
check for outdated version of make
2017-04-23 17:36:21 +02:00
587bfd4084
fix unitialized value error in release build
2017-04-21 14:53:54 +02:00
7386f342b5
ESP32: Use fwrite() instead of printf() for printing strings from Lua. ( #1919 )
...
* use fwrite() instead of printf() for printing strings from Lua
Fixes #1914 .
2017-04-20 09:40:53 +10:00
018a67a710
establish flushing of uart to leverage buffering putchar()
2017-04-18 22:43:03 +02:00
066e8d60fa
install rmt isr as shared for dht and onewire
2017-04-14 19:56:36 +02:00
1866e6f457
Add ws2812 module.
2017-04-14 19:56:27 +02:00
927ee7fc5f
Add dht module.
2017-04-14 19:18:38 +02:00
c8e99d50a5
Updated to latest IDF.
2017-04-14 00:22:33 +02:00
90f5b7696b
handle undefined CONFIG_CONSOLE_BIT_RATE_AUTO
2017-04-06 21:09:22 +02:00
3694ffa957
ow: update rmt handover when switching pins
2017-04-01 14:12:58 +02:00
e2fdd4adbe
Manage RMT channel resources with alloc()/release().
2017-04-01 10:09:10 +02:00
e33fb81b77
Decouple LUAL_BUFFERSIZE from BUFSIZ, revert to 1024.
...
The IDF has dropped BUFSIZ to 128, which is not a good thing for our Lua.
2017-03-29 11:56:17 +11:00
1116bb2c71
ow: handle misconfigured bus gracefully with timeout
2017-03-20 22:20:45 +01:00
21e1cadf05
ESP32: Fix event id for post_net_accept() ( #1869 )
...
* ESP32: Fix event id for post_net_accept()
2017-03-20 00:51:51 +11:00
4b647d007f
Remove IRAM requirement from gpio/single_pin_isr
2017-03-17 17:38:17 +01:00
961c1c72b2
Add ow module.
2017-03-17 07:50:31 +01:00
a3dc13e3fb
fix tmr.interval()
2017-03-09 23:31:02 +01:00
2b98037fa9
refine ack handling for i2c hw master
2017-03-08 16:38:43 +01:00
d4b6180cd2
fix sigma_delta component naming
2017-03-07 23:05:09 +01:00
e203a5829c
add tmr module
2017-03-07 20:54:48 +01:00
0b1e58d6dd
correct portYIELD
2017-03-02 21:37:32 +01:00
859e1a3004
first draft implementation of i2c slave
2017-03-02 21:37:13 +01:00
dbc8d791c6
Added node.chipid() based on esptool's formula.
2017-03-02 22:29:40 +11:00
f5632f41f9
extend i2c master with hardware interfaces for synchronous and asynchronous operation
2017-02-04 20:14:13 +01:00
381726f103
add i2c module
2017-02-02 21:40:36 +01:00
4fcb1404b6
add simga_delta module
2017-01-13 22:34:24 +01:00
9f8dc0271b
Updated to latest IDF.
2017-01-10 11:37:49 +11:00
ea59007bc3
WiFi module documentation and updates.
...
Addresses one point of #1615 .
2017-01-03 12:57:45 +11:00
7abda5c9e0
Updated to latest IDF.
...
- Switched hardcoded interrupts to new IDF interrupt allocation
framework.
- gpio module switched to the IDF's per-pin interrupt callback service.
- Improved NodeMCU linker script since it broke with the IDF upgrade.
- Various compatibility updates.
2016-12-30 19:25:48 +11:00
4ece8de4d9
net module: hold/unhold support.
...
As per @djphoenix's work on the ESP8266 side.
2016-12-30 15:55:14 +11:00
6bce18f9ac
net module: Server timeout support
...
As per @djphoenix's version on the ESP8266 side.
2016-12-30 15:39:07 +11:00
334ba08131
Split wifi.on() into wifi.sta.on()/wifi.ap.on()
...
As discussed in #1615 .
2016-12-10 15:25:57 +11:00
d48265348a
Fixed various warnings.
2016-11-27 13:28:48 +11:00
c505cc0270
Preliminary gpio module.
...
The gpio ISR needs to go into the platform layer most likely, but that's
for later.
2016-11-26 21:54:05 +11:00
c4911ca391
Updated to latest IDF.
...
This fixes the panic-on-restart issue and the crash-on-uart-input-before-flash-mapped issue.
Node module updated to reflect new function names for sleep/restart.
2016-11-25 10:51:49 +11:00
888ce8b5f3
Unbreak integer build.
2016-11-17 21:59:56 +11:00
3fe7f77512
Imported 'bit' module from dev branch.
2016-11-17 21:56:51 +11:00
6ce3e7a551
Imported 'struct' module from dev branch.
2016-11-17 21:48:31 +11:00
0f0cc93f7b
Fix module inclusion (got broken by IDF build changes).
2016-11-17 16:52:01 +11:00
2b454abfdf
Improved flash size detection.
...
With the recent flash layout changes, it became very possible to misdetect the
flash size. We're now using the partition table as the guard marker, since
that really shouldn't be all 0xff. Also, we now don't clobber the flash
device id (and keep block/sector/page/mask values).
2016-11-17 11:56:39 +11:00
2266670b46
Updated to latest IDF.
2016-11-16 17:59:06 +11:00
389980fc0c
Removed call to deprecated system_init().
2016-11-12 13:23:09 +11:00
5c1bb4c6d6
Updated to latest IDF.
...
WiFi STA module updated to reflect IDF name changes.
Platform flash and partition api updated to reflect IDF name changes.
Eventually these (and the SPIFFS module) will likely need to be updated
to exclusively work with the esp_partition_xxx() functions in order to
support working with encrypted flash.
2016-11-12 13:17:17 +11:00
be5dafb264
Imported @djphoenix's new native LWIP net module.
...
Based on his revision 2d290a24a0914be88e5ca4ac7b1018392fe75fe2
(https://github.com/djphoenix/nodemcu-firmware ).
All LWIP callback handling changed to use the NodeMCU task interface
to make it usable on RTOS.
IPv4 assumptions have been removed, and this net module /should/ now
be IPv6 ready, but aside from compilation no testing has been done
in this area.
SSL integration points not touched - some work needed there once we
have an mbedTLS module.
2016-10-06 17:24:08 +11:00
e67c6f0917
Split out IP formatting helpers.
2016-10-06 17:23:48 +11:00
d83437d1ba
Removed left-over UART debug echo.
2016-10-05 14:36:24 +11:00
4fead4a4be
More WiFi module work.
...
Station connect/disconnect/scan, plus event handling via wifi.on().
2016-10-04 17:40:06 +11:00
233bdc63aa
Fixed Kconfig macro use for Lua debug module (oops).
2016-10-04 15:33:40 +11:00
991965e242
Actually include standard Lua modules.
2016-10-04 14:47:41 +11:00
3503a1ec95
Basic wifi config functions.
...
Note need to use explicit wifi.start() at this point.
2016-10-03 17:42:28 +11:00
5df981010a
Prevent UART/startup race ala 1517.
...
We're already in the right context, there is no point posting back the
Lua start, we can do it right then and there instead.
2016-10-03 13:05:17 +11:00
e355057de6
Fix our esp_event_send() implementation.
2016-09-29 18:21:18 +10:00
f9bf50cf03
Simple BlueTooth module for BT LE advertisements.
2016-09-29 17:02:40 +10:00
8e441b59c1
Grabbed the encoder module from dev.
...
Only minor changes to make it IDF friendly.
2016-09-28 17:58:44 +10:00
16e19442c1
Added node.osprint().
...
Implemented in terms of esp_log_level_set() at this point.
2016-09-28 17:57:29 +10:00
febc8f7f36
Updated to latest IDF.
2016-09-28 17:57:00 +10:00
33eb1bc790
Updated to new startup & esp event handling.
...
Modules can now subscribe to ESP system events via the new
NODEMCU_ESP_EVENT() macro. See nodemcu_esp_event.h for details.
2016-09-27 18:42:08 +10:00
6349fc8622
Most of the node module from dev.
...
node.dsleep() no longer takes options.
node.output() not yet supported (needs syscall registration/chaining support)
Dynamic CPU frequency changing not currently supported in the IDF.
Various chip IDs not currently available/obtainable.
Boot reason completely revamped in ESP32, will need new code.
2016-09-26 18:04:24 +10:00
48bbe74cbf
Updated to latest IDF.
...
Lost some helpful macros when they changed the uart register header it seems.
2016-09-26 13:36:53 +10:00
baf8249a79
Improved flash-size auto-detection.
...
No longer limited to the default 2MB.
2016-09-23 17:39:06 +10:00
3b65262922
Less memory leaks if not coding in a rush...
2016-09-22 19:50:46 +10:00
d369953328
Auto-create SPIFFS partition if not found.
...
The heuristics could probably be improved a lot, but this is better than
nothing at least.
2016-09-22 18:19:39 +10:00
60339b812b
SPIFFS partition support, file module from dev.
...
Now uses the designated partition (type 0xC2, 0x00) unconditionally.
2016-09-22 17:18:22 +10:00
0fe0096c04
Platform flash layer updated for ESP32.
...
It would appear my ESP3212 only has a 2MB flash chip despite the
bootloader saying 4MB.
2016-09-22 14:56:40 +10:00
6cd3111d79
Platform interface to flash partition info.
2016-09-22 13:09:56 +10:00
8e23335c0f
Removed more unused legacy code.
2016-09-22 11:42:25 +10:00
6f54c38e53
Grabbed fatfs from dev branch, and IDF-ified it.
2016-09-21 18:21:44 +10:00
4f1b33d522
Grabbed latest spiffs + vfs layer from dev branch.
...
Also included the recent LVM fix.
Platform flash layer not yet functional.
2016-09-21 18:14:15 +10:00
fe602d2d7e
Removed all currently-unused code & docs.
...
Heading towards having only ESP32-aware/capable code in this branch.
2016-09-21 13:47:44 +10:00
51fabc7439
Fixed NodeMCU boot banner.
...
Build for ESP32 on Travis.
2016-09-20 14:19:50 +10:00
9bbf8f43fb
Successfully boot barebones NodeMCU on ESP32 (only).
...
RTOS driver evicted as it did not play nice with stdio etc.
Implemented a minimal driver to fully support Lua console on UART0. Output
on UART0 done via stdout (provided by the IDF). Input and setup handled
via driver_console/console.c. In addition to the direct input function
console_getc(), the driver also registers in the syscall tables to enable
regular stdio input functions to work (yay!). The Lua VM is still using the
direct interface since it's less overhead, but does also work when going
through stdin/fd 0.
Auto-bauding on the console is not yet functional; revisit when the UART docs
are available.
Module registration/linking/enabling moved over to be Kconfig based. See
updates to base_nodemcu/include/module.h and base_nodemcu/Kconfig for
details.
The sdk-overrides directory/approach is no longer used. The IDF is simply
too different to the old RTOS SDK - we need to adapt our code directly instead.
Everything in app/ is now unused, and will need to be gradually migrated
into components/ though it is probably better to migrate straight from the
latest dev branch.
2016-09-20 13:35:56 +10:00
a463d764eb
WIP ESP32 IDF port.
...
Currently the UART driver break boot (or at least output).
2016-09-16 18:11:42 +10:00
devsaurus
Lars Stenberg
zelll
Johny Mattsson
Johny Mattsson