Philip Gladstone
f67792e0d3
Add support for using doubles in the LUA53 build. ( #3225 )
2020-11-07 22:38:40 +01:00
Gregor Hartmann
0e88617659
Fix ftpserver documentation and some formating in httpserver.md ( #3322 )
2020-11-04 09:34:05 +01:00
Marcel Stör
fab34a6cd0
Replace master with release
2020-11-03 22:57:15 +01:00
Nathaniel Wesley Filardo
f5665ace71
MCP23017 module refactorings to save some heap ( #3317 )
...
* mcp23017: functions to metatable
Avoids closures for each module.
* mcp23017: inline constants
Saves nearly half a kilobyte of heap.
2020-10-29 12:59:30 +00:00
Marcel P
ef353809eb
Add mcp23017 Lua module ( #3197 )
2020-10-25 12:48:34 +01:00
Nathaniel Wesley Filardo
f8baf63a73
Further adaptation of lfs/_init.lua
...
See https://github.com/nodemcu/nodemcu-firmware/issues/3278 . Thanks to
@vsky279 and @bazooka07 for suggestions.
2020-10-23 04:22:30 +01:00
Nathaniel Wesley Filardo
045fc80c70
pipe: comment and style fixes (NFC)
...
Reflow comments to 80 columns; fix some typos and other nits.
2020-10-23 04:21:51 +01:00
Nathaniel Wesley Filardo
962991ed18
pipe: fix unread buffer chunk management
...
unread contained two subtle bugs:
- it created a buffer chunk at pipe[1], when that position is reserved
for the pipe reader function. Because it shifted pipe[i] to
pipe[i+1], including pipe[1], this was likely to manifest as the pipe
later attempting to dequeue a function rather than a buffer chunk
user datum. Solve this by adjusting the loop bounds and creation
index.
- when it created a new buffer chunk, it left that chunk's ->start and
->end fields at 0, but would then exit the loop to do the tail fill,
which was in turn assuming the exit condition of the loop when an
existing chunk had room, namely that data had been moved to the right
and so ->start > l. Solve this by making new chunks empty but with
->start = ->end = LUAL_BUFFERSIZE. It may be slightly better to
instead try to leave room at both ends if the buffer was empty prior
to this unread.
FIXES: https://github.com/nodemcu/nodemcu-firmware/issues/3155
2020-10-23 04:21:51 +01:00
Lukáš Voborský
734b02a734
wiegand Lua 5.3 fix
2020-10-23 04:19:41 +01:00
Cody Cutrer
63e1fcda06
add wiegand module ( #3203 )
...
* add wiegand module
* minor tweaks to wiegand module
* fix a whitespace error (tabs!!!!)
* remove an unnecessary volatile qualifier
2020-10-19 01:05:31 +01:00
Philip Gladstone
73df18d738
Fix the initialization of the wifi default hostname. ( #3303 )
...
* It appears that the rf_pre_init is not called any more. Also cleaned up the code in
wifi_common.
* Log a message (at the right baud rate) if the hostname is invalid
* Updated the comment in the user_config.h file
2020-10-18 20:48:10 +02:00
Philip Gladstone
7185b9c603
Improved startup performance and measurement tools. ( #3171 )
...
* Don't adjust the clock until after we deal with rtctime...
* Switched to using START_OPTION_CPU_FREQ_MAX instead.
* Use setfield and add caching of the startup option
* Put the startupcounts warning into a warning box
2020-10-18 20:46:47 +02:00
hanfengcan
02e4720b3d
fix: fixed the memory leak
2020-10-18 16:35:32 +01:00
Philip Gladstone
7830ae671e
Guard against freeing a ref of zero ( #3308 )
2020-10-13 21:43:38 +02:00
Lukáš Voborský
b9091784ae
bme280 driver in Lua+C
2020-10-05 20:41:36 +01:00
Lukáš Voborský
54e8696ac9
struct module minor documentation fix ( #3306 )
...
Thanks
2020-10-04 17:26:42 -04:00
Lukáš Voborský
ebfce4a911
Fixing bug in `file.readline` when line length exceeds 128 chars
2020-09-29 22:57:18 +01:00
Gregor Hartmann
8124341a7b
Change from `master` to `release`
2020-09-29 17:37:20 +02:00
Nathaniel Wesley Filardo
0a1d122cb8
crypto: remove toHex and toBase64 ( #3300 )
...
We marked these for deprecation in favor of the functions of the same
name in encoder. Let's actually make good on that.
2020-09-28 20:42:16 +02:00
philip
ed8c50872a
Add the submodule properly
2020-09-27 03:05:36 +01:00
philip
274828cfd5
Remove ets_printf reference
2020-09-27 03:05:36 +01:00
philip
96a6dcc196
CLean up the PR a bit
2020-09-27 03:05:36 +01:00
philip
9bea108da7
Now use the original c99-snprintf as a submodule.
2020-09-27 03:05:36 +01:00
philip
6ba23ca267
Remove some uses of etc_*printf
2020-09-27 03:05:36 +01:00
philip
8bce7937ac
Conditionalize int2float on lua 5.3
2020-09-27 03:05:36 +01:00
philip
f316ebf73a
Remove ESP8266 special case
2020-09-27 03:05:36 +01:00
philip
403c633b25
Make it work for the integer lua51 build
2020-09-27 03:05:36 +01:00
philip
85298b34c5
Now round trips in float firmware, and gets it roughly right in double (in lua 51)
2020-09-27 03:05:36 +01:00
philip
96d8047f71
Give it a chance of working under Lua 5.1
2020-09-27 03:05:36 +01:00
philip
df9f3030e6
Add snprintf and remove our sprintf
2020-09-27 03:05:36 +01:00
philip
5b6b2f98b7
Make round tripping work for lua53 and floats
2020-09-27 03:05:36 +01:00
philip
e9c4bb74d3
Make it inline
2020-09-27 03:04:52 +01:00
philip
862c727cb4
Add missing ICACHE_RAM_ATTR
2020-09-27 03:04:52 +01:00
Philip Gladstone
9d74cd5aa0
Improve the enduser setup experience by triggering captive portal detection. ( #3282 )
...
* Make captive portal detection work on macOS
* Change the default SSID prefix to be NodeMCU
2020-09-18 23:47:52 +02:00
Nathaniel Wesley Filardo
dc334f87a6
uart: expose fifo depth counters ( #3177 )
2020-09-18 23:46:32 +02:00
Philip Gladstone
139af0cdd1
Handle tcp fragmentation and also fix XSS problem. ( #3275 )
2020-09-15 14:06:38 +02:00
Philip Gladstone
c000a0894a
Fix problem reading files a multiple of 128 bytes long ( #3280 )
2020-09-13 11:37:54 -04:00
vsky
64bbf00689
Adding '+' flag to string.format
2020-09-09 04:23:33 +01:00
Gregor Hartmann
4d784798a7
Add deprecation note to node.flashreload ( #3273 )
2020-09-08 12:17:12 +02:00
Terry Ellison
d88c14b9b6
Update node.c
...
Redo last change
2020-09-07 13:09:25 +01:00
Terry Ellison
41c5f8fd57
Update node.c
...
To fix #3251 .
2020-09-07 12:53:51 +01:00
Lukáš Voborský
38f13a7e9f
Fixes broken `tmr.alarm` ( #3263 )
...
Co-authored-by: vsky <blue205@centrum.cz>
2020-09-05 14:16:57 +02:00
vsky
e28cf8d983
Fixes `net.ifinfo` failure
2020-09-04 21:54:40 +02:00
galjonsfigur
e7620b0647
SoftUART module fixes and code simplification ( #3104 )
...
* SoftUART fixes:
- Simplify code by using lua_L* functions and using userdata properly
- Fix some edge-cases
- Add more examples to documentation
* Don't de-register interrupt hook if there is more RX instances
* More bug fixes and registering simplification with luaL_reref and unref2
* Correct documentation of SoftUART module
2020-09-04 17:02:33 +02:00
vsky
a0d27059bc
LFS lua example Lua 5.3 compatibility
2020-09-03 12:50:29 +01:00
Philip Gladstone
ba611101e5
Don't allocate flash to SPIFFS that is reserved by the system. ( #3260 )
2020-09-01 22:40:57 +01:00
galjonsfigur
b4c148eff0
Add missing features to Travis CI PR build ( #3255 )
2020-08-30 21:04:00 +02:00
Lukáš Voborský
d72ea91ed0
Implementing optional parameter `restart` to tmr:start() ( #3111 )
2020-08-29 21:43:50 +02:00
M.K
87030a87ea
Fix filename of luac.cross in upload.md ( #3258 )
2020-08-29 21:25:38 +02:00
Philip Gladstone
606f91664b
First phase of number to integer conversion ( #3221 )
2020-08-29 17:48:24 +01:00