Commit Graph

67 Commits

Author SHA1 Message Date
Nathaniel Wesley Filardo 35a266e2c2 Remove sqlite3 module
It's not clear that this ever worked, AFAICT nobody uses it, and it's an
old version of the sqlite3 engine at this point.  Absent a maintainer,
let's just get rid of it.
2020-06-10 02:14:29 +01:00
Terry Ellison bbeb09b695 Squashed updates do get Lua51 and Lua53 working (#3075)
-  Lots of minor but nasty bugfixes to get all tests to run clean
-  core lua and test suite fixes to allow luac -F to run cleanly against test suite
-  next tranch to get LFS working
-  luac.cross -a options plus fixes from feedback
-  UART fixes and lua.c merge
-  commit of wip prior to rebaselining against current dev
-  more tweaks
2020-06-09 22:26:52 +02:00
Terry Ellison e7c29fe38e Lua 5.1 to 5.3 realignement phase 1 2020-06-09 22:26:06 +02:00
Terry Ellison 98c2c0520d
Dev make cleanup (#2842) 2019-07-23 18:47:18 +03:00
Johny Mattsson 526d21dab4 Major cleanup - c_whatever is finally history. (#2838)
The PR removed the bulk of non-newlib headers from the NodeMCU source base.  
app/libc has now been cut down to the bare minimum overrides to shadow the 
corresponding functions in the SDK's libc. The old c_xyz.h headerfiles have been 
nuked in favour of the standard <xyz.h> headers, with a few exceptions over in 
sdk-overrides. Again, shipping a libc.a without headers is a terrible thing to do. We're 
still living on a prayer that libc was configured the same was as a default-configured
xtensa gcc toolchain assumes it is. That part I cannot do anything about, unfortunately, 
but it's no worse than it has been before.

This enables our source files to compile successfully using the standard header files, 
and use the typical malloc()/calloc()/realloc()/free(), the strwhatever()s and 
memwhatever()s. These end up, through macro and linker magic, mapped to the 
appropriate SDK or ROM functions.
2019-07-22 00:58:21 +03:00
Terry Ellison f1b5dfc34e
SDK-3.0 tranche updates (#2757)
includes some dRAM -> iRAM optimisations
2019-05-17 13:04:19 +01:00
Terry Ellison 1990f95740
Updated ROTables 1st tranch (#2742)
Updated ROTables
2019-05-08 14:08:20 +03:00
Terry Ellison 9a47107920
SDK 3.0 release (#2692)
* Rebaseline firmware to non-OS SDK version 3.0
* Note that SDK version 3.0 introduces the concept of a Flash Partition Table(PT).  This is located at Flash offset 0x10000 in our firmware build.
* The firmware is now PT aware with both LFS and SPIFFS taking their partition size and location from the PT
* A new tool `tools/nodemcu-partition.py` is now used to initialise these data and can also download LFS and SPIFFS images to these partitions.
2019-04-05 16:01:45 +01:00
Natalia b77033f920 Always compile `app/crypto` folder (#2573) 2018-11-28 14:03:33 +01:00
Terry Ellison 172fb276ca
Add compression to LFS images (#2448)
* Merge of LFS compress, optimize against current dev
* Fixes to LFS compress patch
2018-09-29 16:57:51 +03:00
devsaurus c03df2b4bd adapt to new optional build strategy 2018-07-22 15:17:58 +02:00
devsaurus 87bb96dfbe port u8g2 module from esp32 platform 2018-07-22 13:51:10 +02:00
TerryE 4f7af452a8 corrections to dev merge 2018-04-20 02:34:52 +01:00
Terry Ellison 6db7414270
Merge branch 'dev' into dev-LFS 2018-04-19 16:43:55 +01:00
TerryE 88bd9e01d3 LFS patch updates following review 2018-04-19 16:27:47 +01:00
dnc40085 96e5c026a8 Refactor timer suspend portion of node.sleep (pmsleep) (#2287)
* pmsleep refactor
* Shortened swtmr disabled message 
* Added swtimer debug module option to user_modules.h.
* Added comments to user_config.h.
* Fixed error in documentation for node.sleep()
* remove blank sntp.c that got added in during rebase onto dev(6218b92)
* Added #ifdefs around SWTIMER_REG_CB to prevent inclusion of disabled
code
2018-04-13 21:41:14 +02:00
TerryE 4ae52c232c Alpha working wersion for third party evaluation 2018-03-17 00:43:52 +00:00
Nathaniel Wesley Filardo c972d86ea9 Update to sdk 2.2
Initial commit for
https://github.com/nodemcu/nodemcu-firmware/issues/2225 .

Replay patches from Espressif's repository at
https://github.com/espressif/ESP8266_NONOS_SDK between tags v2.1.0 and
v2.2.0:

	0001-sync-from-ccca00f2.patch

		Superseded by existing changes, but lines reordered in app/driver/key.c
		to minimize divergences.

	0002-sync-from-3f38ad5a.patch

		Upstream files only

	0003-Update-links.patch

		Not meaningful to NodeMCU

	0004-sync-from-01990ad0.patch
	0005-sync-from-cdf6877d.patch

		Upstream files only

	0006-sync-from-f29e744c.patch

		Upstream files only, user_interface.h override non-conflicting

	0009-feat-lwip-Move-lwip-source-code-to-third_party-folde.patch

		Merged change to lwip/app/espconn_udp.c; rest is just moves or
		appears to not apply.

	0010-feat-mbedtls-Add-mbedtls-source-code-in-third_party-.patch

		Does not apply; we use our own mbedtls

	0011-added-C-support.patch

		Merged to Makefile

	0012-feat-mbedtls-Rebuild-libmbedtls.patch

		Already applied

	0013-fix-at-Fix-some-bugs-of-AT.patch

		Upstream files only

	0014-feat-err_t-Redefine-err_t-to-s32_t.patch

		Merged to app/include/arch/cc.h and ./app/include/lwip/app/espconn.h;
		the rest is upstream files.

	0015-fix-wpa-Fix-wpa-wpa2-ptk-gtk-reinstallation-vulnerab.patch
	0016-fix-wifi-Remove-group-key-entry-before-connecting-to.patch
	0017-feat-lib-Remove-time-function-in-libmain.patch

		Upstream files only

	0018-feat-espconn-Modification-for-espconn.patch

		Merged to app/include/lwip/app/espconn.h,
		app/include/lwip/app/espconn_tcp.h, app/lwip/app/espconn.c,
		app/lwip/app/espconn_tcp.c

	0019-feat-at-Use-new-espconn_recv-to-fix-tcp-server-issue.patch
	0020-feat-examples-Update-mqtt-demo-and-auto-bin-generate.patch

		Upstream files only

	0021-wifi-Add-scan-threshold-and-dwell-time.patch
	0022-feat-wifi-Add-country-code-API.patch
	0023-feat-wifi-Record-more-information-of-scanned-ap.patch

		Upstream files only, user_interface.h override non-conflicting

	0024-fix-example-Fix-IoT_Demo-user-sector-error.patch

		Upstream files only

	0025-fix-lwip-Fix-sequence-number-error-of-RST-ACK.patch

		Merged app/lwip/core/tcp_in.c

	0026-fix-mbedtls-Fix-memory-leak.patch

		Merged app/mbedtls/app/lwIPSocket.c

	0027-fix-mbedtls-Fix-call-send-callback-function-failed.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0028-feat-Add-USE_OPTIMIZE_PRINTF-in-third_party-Makefile.patch

		Merged app/Makefile

	0029-fix-api-Fix-ets_delay_us-declaration.patch

		Upstream files only, osapi.h override non-conflicting

	0030-fix-wifi-Remove-max_tx_power-in-wifi_country_t-in-li.patch
	0031-fix-wifi-Fix-softAP-wrong-behavior-after-call-system.patch
	0032-fix-wifi-bugfix-of-scan-fail-after-connected-if-max-.patch
	0033-feat-at-Enable-scan-time-scan-type-and-add-scan-resu.patch
	0034-feat-at-Add-command-AT-CWCOUNTRY.patch
	0035-fix-at-Fix-that-AT-CIPSTART-causes-busy-if-the-serve.patch

		Upstream files only

	0036-feat-mbedtls-Speed-up-mbedtls-handshake-process.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0037-fix-api-Fix-os_calloc-declaration.patch

		Merged app/include/lwip/mem.h; sdk-overrides/include/mem.h
		non-conflicting.

	0038-fix-mbedtls-Fix-disconnect-callback-function-never-b.patch

		Merged app/mbedtls/app/espconn_mbedtls.c; minor revision to logic in
		6576af959b.  Whitespace fixes.

	0039-feat-at-Add-country-code-start-channel-in-AT-CWCOUNT.patch
	0040-fix-net80211-Fix-Null-pointer-in-ieee80211_rfid_locp.patch

		Upstream files only

	0041-feat-wifi-Add-new-esp_init_data_default-v08-bin.patch

		Upstream files only, but impacts Makefile

	0042-fix-mbedtls-Fix-load-cert-fail-when-the-private-key-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0043-fix-wifi-The-start-channel-can-be-any-valid-channel.patch
	0044-fix-wifi-Fix-scan-do-not-start-after-connect.patch
	0045-feat-wifi-Add-keep-connection-for-station-to-keep-co.patch
	0046-feat-at-Update-AT-version-to-1.6.0.0.patch
	0047-fix-at-Fix-GSLP-too-long-time.patch
	0048-fix-at-Fix-the-message-is-incorrect-when-creating-UD.patch
	0049-feat-at-Add-AT-CIPSERVERMAXCONN.patch

		Upstream files only

	0050-feat-system-Add-softap-distributes-station-ip-event.patch

		Upstream files only, user_interface.h override non-conflicting

	0051-feat-example-Use-libmbedtls.a-instead-of-libssl.a-in.patch

		Upstream files only

	0052-feat-mesh-Remove-mesh-support.patch

		Upstream files only, but go ahead and remove comment from
		ld/nodemcu.ld.

	0053-fix-example-Fix-forget-to-add-integer-parameter-when.patch

		Upstream files only

	0054-fix-mbedtls-Fix-reconnect_callback-is-not-triggered-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0055-feat-at-Add-AT-SYSMSG-to-enable-some-report-informat.patch
	0056-fix-at-Fix-the-incorrect-link-id-when-client-connect.patch
	0057-fix-at-Fix-the-bug-that-it-should-be-error-when-the-.patch
	0058-fix-smartconfig-Fix-the-smartconfig-scan-time-issue.patch
	0059-fix-lwip-Fix-the-bug-of-lwip-output.patch

		Upstream files only

	0060-fix-lwip-Fix-the-length-of-TCP-data-in-one-packet-is.patch
	0061-fix-lwip-Fix-send-TCP-data-with-two-or-more-pbuf.patch

		Merged app/lwip/core/tcp_out.c

	0062-fix-wifi-Fix-assert-happen-when-smartconfig-start-th.patch

		Upstream files only

	0063-fix-mbedtls-Fix-memory-leak-when-ESP8266-as-SSL-TLS-.patch

		Merged app/mbedtls/app/espconn_mbedtls.c

	0064-fix-mbedtls-Fix-already-freed-and-exception-bug-when.patch

		Merged app/mbedtls/app/lwIPSocket.c

	0065-fix-at-Fix-bug-that-there-is-no-result-when-sending-.patch
	0066-feat-example-Add-AT-bin-version.patch
	0067-feat-version-Update-version-to-2.2.0-and-add-version.patch
	0068-feat-bin-Update-AT-bin-for-SDK-2.2.0.patch

		Upstream files only

Apply local changes to build:

	app/include/lwip/app/espconn.h pulls changes (and license decl) from
	upstream SDK.  Makefile is altered to use this file ahead of the
	SDK's.

	Remove lwip's sntp support, since it was never really wired in anyway.
	See https://github.com/nodemcu/nodemcu-firmware/issues/2042 for more
	information.  Patch Makefile to strip time.o, the consumer of lwip's
	sntp functionality, from libmain.a, resulting in much
	easier-to-understand error messages.

	This has consequences for mbedtls.  The simplest thing to do, which is,
	impressively, not a change in behavior, is to completely disable TLS
	certificate time validation; a later patch can optionally couple this to
	RTCTIME support.

	Similarly, it happens that the sqlite3 import was calling time(), but
	this was not going to work out well for it.  Just stub it out to always
	return unix timestamp 0, as would have happened anyway.

Changes unprocessed:

	0007-sync-from-080c37e1.patch
	0008-feat-lib-Compile-some-libraries-with-ffunction-secti.patch

		These two make changes to the linker script; perhaps
		they are worth porting over, but I have not done so
		here.

This is build-tested (ADC, BIT, COLOR_UTILS, CRON, CRYPTO, DHT, ENCODER,
FILE, GPIO, HTTP, I2C, MQTT, NET, NODE, OW, PCM, PERF, PWM, RTCFIFO,
RTCMEM, RTCTIME, SNTP, SPI, SQLITE3, STRUCT, TLS, TMR, UART, WIFI,
WS2812, WS2812_EFFECTS) and boots, but only limited run-time testing has
been performed.  Testing done does, however, include having made a few
TLS connections through the HTTP module, so things are not hopelessly
broken, at the very least.
2018-03-13 19:28:11 -04:00
Luiz Felipe Silva df930c2d03 Add sqlite3 module (#2008)
* add final sqlite3 patch
* remove unused defines, join caching code with esp vfs code to reduce exported symbols and shrink final file size
* Modules should by default be disabled and in alphabetical order
2018-01-10 22:45:56 +01:00
Johny Mattsson ea4d33715f Cleaned up sjson module build.
- Move jsonsl build to regular library build rather than #include the .c file
- Provide wrappers for malloc/calloc/free to fix undefined symbol warnings.
2017-07-03 13:35:45 +10:00
dnc40085 41a5736d78 Add wifi.suspend() and node.sleep() (#1231)
* Exposed forced sleep API and more
Added timer suspend functionality
* wifi.suspend
* wifi.resume
* node.sleep 
* tmr.suspend
* tmr.suspend_all
* tmr.resume
* tmr.resume_all
* Implement timer suspend functionality
* Fix for uart TX glitch
* Made some modifications to the error reporting
2017-04-04 21:31:06 +02:00
Philip Gladstone b09cac058a Add support for streaming JSON encoder/decoder (#1755)
Replaces the problematic cjson module.
2017-03-22 11:24:32 +11:00
FrankX 378e5eb0ad Add WPS module (#1694)
* WPS functionality added

* WPS module switched off by default

* Update mkdocs.yml
2017-01-09 08:43:47 +01:00
Yury Popov bdd54648f4 Upgrade to SDK 2.0.0 (#1435)
* Update LWIP from SDK
* mbedTLS integration
* Fix argument type in dbg_printf (#1624)
* Migrate to espressif’s download center (#1604)
* Fixed BBS links to firmware
* Adjust net module docs with mbedTLS info
* Remove unrelevant axTLS notice
2016-12-11 21:03:00 +01:00
Philip Gladstone 04e93b2433 Add the esp-gdbstub to enable debugging (#1506)
* Initial version of gdbstub support

* Add DEBUG argument to Makefile to add more debug data and turn off -Os

* Add the output redirection handling

* Added documentation

* Cleaned up the english a bit

* Make gdboutput actually trap all the output

* Review comments
2016-09-21 11:38:12 +10:00
Arnim Läuger ecf8bd98d6 Add FatFs and SD card support (#1397)
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
2016-09-05 20:17:13 +02:00
Luís Fonseca 16051d51d6 Implement initial version for websocket module (#1433) 2016-08-18 13:59:44 +02:00
Arnim Läuger d416648990 Add pcm module. (#1255)
* Add pcm module.
* Add network streaming example.
* document hw_timer dependency with pwm
* Add vu peak callback.
2016-06-05 23:21:36 +02:00
Arnim Läuger 37411da06d Remove app/json. (#1312) 2016-05-27 11:53:21 +02:00
Philip Gladstone 3a5e5f10e2 Take 2: Add regular sends to mdns. Check for (some) buffer overflows. Make it handle unicast
Merging as suggested by @TerryE (and squashing at the same time. Turns out that this feature is enabled for this repo).

* Squashed commit of the following:

commit f985f10d9d2ee035f5a6ee6245c60d9904d98cc1
Author: philip <philip@gladstonefamily.net>
Date:   Sun Mar 27 21:52:46 2016 -0400

    Better mdns code

commit 6ee49ee106
Author: philip <philip@gladstonefamily.net>
Date:   Fri Mar 25 23:25:11 2016 -0400

    Update the docs

commit 7e455541c6
Author: philip <philip@gladstonefamily.net>
Date:   Thu Mar 24 21:58:16 2016 -0400

    Add retries and buffer checking to mdns

    Get the length right

    Now it seems to work

* Might work for combined mode

* Fix crash

* Simplified various bits of code. Changed the LUA interface

Added checking (to some degree) incoming quyery types

Move the defaults to the right place

Added reference to the RFC`
2016-04-03 14:10:52 -04:00
TerryE 46ea2aa42e Make the wifi.smart functions options and remove wofs and upgrade
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart().  Removing
them frees up an extra 20-25K of Flash to use as filesystem.  So I have
added a new config define WIFI_SMART_ENABLE which is enabled by default
so the default functionality is the same, but if this is commented out
then this code is omitted.

I have also removed wofs and upgrade from this build as we no longer
support these.
2016-02-26 17:23:38 +00:00
TerryE 49733f6f6d Add New Tasking I/F and rework GPIO, UART, etc to support it
As with the last commit this rolls up the follwowing, but include the various
review comments on the PR.

-   **Documentation changes**. I've added the taks FAQ as a stub new Extension
developer FAQ, and split the old FAQ into a Lua Developer FAQ and a Hardware
FAQ.

-   **Tasking I/F**.  New `app/task/Makefile`, `app/task/task.c`,
`app/include/task/task.h` and `app/Makefile` as per previous commit.  Cascade
changes to `app/driver/uart.c`, `app/include/driver/uart.h`,
`app/user/user_main.c` and `app/modules/node.c`

-   **GPIO Rework** to `app/modules/gpio.c` and `pin_map.[hc]`, `platform.[hc]`
in `app/platform`

-   **Other Optimisations** Move the `platform_*_exists()` from
`app/platform/common.c` to static inline declarations in `platform.h` as
this generates faster, smaller code. Move lgc.a routines out of iram0.
2016-02-17 17:13:17 +00:00
Johny Mattsson 52e121f469 Merge pull request #887 from vowstar/dev-all-in-one
Add HTTP client module and documents.
2016-01-15 17:44:41 +11:00
Huang Rui 88bae3ed22 Remove all version data and combine 33 commits to 1.
Add http module and documention, including fix httpclient bug.
2015-12-29 19:25:37 +08:00
Johny Mattsson a6c0873a28 Upgrade to SDK 1.5.0 + Espressif's Open LWIP 1.5.0.
Removed earlier TCP port randomisation fix - the new SDK has its own fix
even though Espressif told me they wouldn't fix it. Yay?
2015-12-23 11:17:05 +11:00
Johny Mattsson 9003d3e8fb Rework NODEMCU_MODULE() to not pull in extra gunk.
Third time lucky. I hope. Hi Terry.
2015-12-18 13:10:48 +11:00
Johny Mattsson 7e02935a27 Deal with ld's overly eager discarding of globals. 2015-12-17 12:37:01 +11:00
Johny Mattsson 6b6456be47 Major cleanup of module registration.
As per #810 & #796, only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are
supported when building. This commit effects that limitation.

With this change modules/auxmods.h no longer needs to be updated for
every new module, nor do module writers need to cater for a hypothetical
LUA_OPTIMIZE_MEMORY < 2 scenario.
2015-12-12 15:03:40 +11:00
Johny Mattsson 711d464a2b Re-enabled open source LWIP. 2015-10-12 13:26:05 +11:00
Johny Mattsson 67a711931a Switch to SDK LWIP until issues with the open one can be resolved. 2015-10-12 13:26:05 +11:00
Johny Mattsson 30380f6cff Further cleanup of ld directory.
Renamed the main linker script to make it clear it is customised for NodeMCU
and not to be confused with the standard linker SDK linker scripts.

Changed to using the eagle.rom.addr.v6.ld file from the SDK.
2015-10-12 13:26:04 +11:00
Johny Mattsson 8bdde6e28d Sorted out linker scripts & options.
Now boots to Lua prompt, but promptly reboots itself before input.
2015-10-12 13:26:04 +11:00
Johny Mattsson c1cd58e096 Build using 1.4.0 SDK + remove old SDK includes/libs.
Leaving the linker scripts intact for now, as they're quite customised.
2015-10-12 13:00:38 +11:00
devsaurus 6dc0dfc068 import ucglib v1.3.3
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
aeprox fd93a09a88 Code formatting fixes 2015-08-23 02:29:52 +02:00
aeprox 335ea87964 Glue to integrate with nodeMCU
makefiles etc
2015-08-22 14:25:47 +02:00
Johny Mattsson b0f9788a6d Move constants to ROM. Frees up 16k+ of RAM.
Accessing 8bit and 16bit constants from ROM rather than RAM comes with a
performance cost, as these loads go through the load/store exception
vector. Any performance critical constants can be forced back into RAM
as RAM_CONST_ATTR.

The entry point has changed from call_user_start() to user_start_trampoline()
in order for the exception handler to be installed early enough.
2015-06-23 15:41:14 +10:00
vowstar 98a2c9fdb6 Align all TAB=8 in app/Makefile, make sure it fit for github display. 2015-06-18 17:36:27 +08:00
vowstar 515a7bf1ab Add dhtlib for DHT11/21/22/33/44, port from Arduino. 2015-06-17 16:30:12 +08:00
HuangRui 3cd5a6a1ed Merge branch 'master' of https://github.com/bruceme/nodemcu-firmware into dev
Conflicts:
	app/modules/net.c
2015-06-04 15:04:12 +08:00