113 lines
4.1 KiB
Markdown
113 lines
4.1 KiB
Markdown
# WS2812 Module
|
|
| Since | Origin / Contributor | Maintainer | Source |
|
|
| :----- | :-------------------- | :---------- | :------ |
|
|
| 2015-02-05 | [Till Klocke](https://github.com/dereulenspiegel), [Thomas Soëte](https://github.com/Alkorin) | [Till Klocke](https://github.com/dereulenspiegel) | [ws2812.c](../../app/modules/ws2812.c)|
|
|
|
|
ws2812 is a library to handle ws2812-like led strips.
|
|
It works at least on WS2812, WS2812b, APA104, SK6812 (RGB or RGBW).
|
|
|
|
The library uses UART1 routed on GPIO2 (Pin D4 on NodeMCU DEVKIT) to
|
|
generate the bitstream. It can use UART0 routed to TXD0 as well to
|
|
handle two led strips at the same time.
|
|
|
|
**WARNING**: In dual mode, you will loose access to the Lua's console
|
|
through the serial port (it will be reconfigured to support WS2812-like
|
|
protocol). If you want to keep access to Lua's console, you will have to
|
|
use an other input channel like a TCP server (see [example](https://github.com/nodemcu/nodemcu-firmware/blob/release/lua_modules/telnet/telnet.lua))
|
|
|
|
## ws2812.init()
|
|
Initialize UART1 and GPIO2, should be called once and before write().
|
|
Initialize UART0 (TXD0) too if `ws2812.MODE_DUAL` is set.
|
|
|
|
#### Syntax
|
|
`ws2812.init([mode])`
|
|
|
|
#### Parameters
|
|
- `mode` (optional) either `ws2812.MODE_SINGLE` (default if omitted) or `ws2812.MODE_DUAL`
|
|
|
|
In `ws2812.MODE_DUAL` mode you will be able to handle two strips in parallel but will lose access to Lua's serial console as it shares the same UART and PIN.
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
## ws2812.write()
|
|
Send data to one or two led strip using its native format, which is generally
|
|
Green, Red, Blue for RGB strips and Green, Red, Blue, White for RGBW strips.
|
|
(However, ws2812 drivers have been observed wired up in other orders.)
|
|
|
|
Because this function uses the hardware UART(s), it is able to return and allow
|
|
Lua to resume execution up to 300 microseconds before the data has finished
|
|
being sent. If you wish to perform actions synchronous with the end of the
|
|
data transmission, [`tmr.delay()`](../tmr#tmr.delay()) for 300 microseconds.
|
|
|
|
Separately, because this function returns early, back-to-back invocations may
|
|
not leave enough time for the strip to latch, and so may appear to the ws2812
|
|
drivers to be simply writes to a longer LED strip. Please ensure that you have
|
|
more than 350 microseconds between the return of `ws2812.write()` to your Lua
|
|
and the next invocation thereof.
|
|
|
|
#### Syntax
|
|
`ws2812.write(data1, [data2])`
|
|
|
|
#### Parameters
|
|
- `data1` payload to be sent to one or more WS2812 like leds through GPIO2
|
|
- `data2` (optional) payload to be sent to one or more WS2812 like leds through TXD0 (`ws2812.MODE_DUAL` mode required)
|
|
|
|
Payload type could be:
|
|
- `nil` nothing is done
|
|
- `string` representing bytes to send
|
|
- a [pixbuf](pixbuf) object containing the bytes to send. The pixbuf's type is not checked!
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
#### Example
|
|
```lua
|
|
ws2812.init()
|
|
ws2812.write(string.char(255, 0, 0, 255, 0, 0)) -- turn the two first RGB leds to green
|
|
```
|
|
|
|
```lua
|
|
ws2812.init()
|
|
ws2812.write(string.char(0, 0, 0, 255, 0, 0, 0, 255)) -- turn the two first RGBW leds to white
|
|
```
|
|
|
|
```lua
|
|
ws2812.init(ws2812.MODE_DUAL)
|
|
ws2812.write(string.char(255, 0, 0, 255, 0, 0), string.char(0, 255, 0, 0, 255, 0)) -- turn the two first RGB leds to green on the first strip and red on the second strip
|
|
```
|
|
|
|
```lua
|
|
ws2812.init(ws2812.MODE_DUAL)
|
|
ws2812.write(nil, string.char(0, 255, 0, 0, 255, 0)) -- turn the two first RGB leds to red on the second strip, do nothing on the first
|
|
```
|
|
|
|
# Pixbuf support
|
|
For more advanced animations, it is useful to keep a "framebuffer" of the strip,
|
|
interact with it and flush it to the strip.
|
|
|
|
For this purpose, the [pixbuf](pixbuf) library offers a read/write buffer and
|
|
convenient functions for pixel value manipulation.
|
|
|
|
For backwards-compatibility, `pixbuf.newBuffer()` is aliased as
|
|
`ws2812.newBuffer`, but this will be removed in the next nodemcu-firmware
|
|
release.
|
|
|
|
#### Example
|
|
Led chaser with a RGBW strip
|
|
|
|
```lua
|
|
ws2812.init()
|
|
|
|
i, buffer = 0, pixbuf.newBuffer(300, 4)
|
|
|
|
buffer:fill(0, 0, 0, 0)
|
|
|
|
tmr.create():alarm(50, 1, function()
|
|
i = i + 1
|
|
buffer:fade(2)
|
|
buffer:set(i % buffer:size() + 1, 0, 0, 0, 255)
|
|
ws2812.write(buffer)
|
|
end)
|
|
```
|