104 lines
2.6 KiB
Markdown
104 lines
2.6 KiB
Markdown
# UART Module
|
|
The [UART](https://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter) (Universal asynchronous receiver/transmitter) module allows configuration of and communication over the UART serial port.
|
|
|
|
## uart.alt()
|
|
Change UART pin assignment.
|
|
|
|
#### Syntax
|
|
`uart.alt(on)`
|
|
|
|
#### Parameters
|
|
`on`:
|
|
- `0` use standard pins
|
|
- `1` use alternate pins GPIO13 and GPIO15
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
## uart.on()
|
|
|
|
Sets the callback function to handle UART events.
|
|
|
|
Currently only the "data" event is supported.
|
|
|
|
#### Syntax
|
|
`uart.on(method, [number/end_char], [function], [run_input])`
|
|
|
|
#### Parameters
|
|
- `method` "data", data has been received on the UART
|
|
- `number/end_char`
|
|
- if pass in a number n<255, the callback will called when n chars are received.
|
|
- if n=0, will receive every char in buffer.
|
|
- if pass in a one char string "c", the callback will called when "c" is encounterd, or max n=255 received.
|
|
- `function` callback function, event "data" has a callback like this: `function(data) end`
|
|
- `run_input` 0 or 1. If 0, input from UART will not go into Lua interpreter, can accept binary data. If 1, input from UART will go into Lua interpreter, and run.
|
|
|
|
To unregister the callback, provide only the "data" parameter.
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
#### Example
|
|
```lua
|
|
-- when 4 chars is received.
|
|
uart.on("data", 4,
|
|
function(data)
|
|
print("receive from uart:", data)
|
|
if data=="quit" then
|
|
uart.on("data") -- unregister callback function
|
|
end
|
|
end, 0)
|
|
-- when '\r' is received.
|
|
uart.on("data", "\r",
|
|
function(data)
|
|
print("receive from uart:", data)
|
|
if data=="quit\r" then
|
|
uart.on("data") -- unregister callback function
|
|
end
|
|
end, 0)
|
|
```
|
|
|
|
## uart.setup()
|
|
|
|
(Re-)configures the communication parameters of the UART.
|
|
|
|
#### Syntax
|
|
`uart.setup(id, baud, databits, parity, stopbits, echo)`
|
|
|
|
#### Parameters
|
|
- `id` always zero, only one uart supported
|
|
- `baud` one of 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 74880, 115200, 230400, 256000, 460800, 921600, 1843200, 3686400
|
|
- `databits` one of 5, 6, 7, 8
|
|
- `parity` `uart.PARITY_NONE`, `uart.PARITY_ODD`, or `uart.PARITY_EVEN`
|
|
- `stopbits` `uart.STOPBITS_1`, `uart.STOPBITS_1_5`, or `uart.STOPBITS_2`
|
|
- `echo` if 0, disable echo, otherwise enable echo
|
|
|
|
#### Returns
|
|
configured baud rate (number)
|
|
|
|
#### Example
|
|
```lua
|
|
-- configure for 9600, 8N1, with echo
|
|
uart.setup(0, 9600, 8, uart.PARITY_NONE, uart.STOPBITS_1, 1)
|
|
```
|
|
|
|
## uart.write()
|
|
|
|
Write string or byte to the UART.
|
|
|
|
#### Syntax
|
|
`uart.write(id, data1 [, data2, ...])`
|
|
|
|
#### Parameters
|
|
- `id` always 0, only one UART supported
|
|
- `data1`... string or byte to send via UART
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
#### Example
|
|
```lua
|
|
uart.write(0, "Hello, world\n")
|
|
```
|
|
|