80 lines
3.1 KiB
Markdown
80 lines
3.1 KiB
Markdown
# Telnet Module
|
|
|
|
| Since | Origin / Contributor | Maintainer | Source |
|
|
| :----- | :-------------------- | :---------- | :------ |
|
|
| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Terry Ellison](https://github.com/TerryE) | [simple_telnet.lua](./simple_telnet.lua) |
|
|
| 2018-05-24 | [Terry Ellison](https://github.com/TerryE) | [Terry Ellison](https://github.com/TerryE) | [telnet.lua](./telnet.lua) |
|
|
|
|
|
|
The Lua telnet example previously provided in our distro has been moved to this
|
|
file `simple_telnet.lua` in this folder. This README discusses the version complex
|
|
implementation at the Lua module `telnet.lua`. The main reason for this complex
|
|
alternative is that a single Lua command can produce a LOT of output, and the
|
|
telnet server has to work within four constraints:
|
|
|
|
- The SDK rules are that you can only issue one send per task invocation, so any
|
|
overflow must be buffered, and the buffer emptied using an on:sent callback (CB).
|
|
|
|
- Since the interpeter invokes a node.output CB per field, you have a double whammy
|
|
that these fields are typically small, so using a simple array FIFO would rapidly
|
|
exhaust RAM.
|
|
|
|
- For network efficiency, the module aggregates any FIFO buffered into sensible
|
|
sized packet, say 1024 bytes, but it must also need to handle the case when larger
|
|
string span multiple packets. However, you must flush the buffer if necessary.
|
|
|
|
- The overall buffering strategy needs to be reasonably memory efficient and avoid
|
|
hitting the GC too hard, so where practical avoid aggregating small strings to more
|
|
than 256 chars (as NodeMCU handles \<256 using stack buffers), and avoid serial
|
|
aggregation such as buf = buf .. str as this hammers the GC.
|
|
|
|
So this server adopts a simple buffering scheme using a two level FIFO. The
|
|
`node.output` CB adds records to the 1st level FIFO until the #recs is \> 32 or the
|
|
total size would exceed 256 bytes. Once over this threashold, the contents of the
|
|
FIFO are concatenated into a 2nd level FIFO entry of upto 256 bytes, and the 1st
|
|
level FIFO cleared down to any residue.
|
|
|
|
The sender dumps the 2nd level FIFO aggregating records up to 1024 bytes and once this
|
|
is empty dumps an aggrate of the 1st level.
|
|
|
|
Lastly remember that owing to architectural limitations of the firmware, this server
|
|
can only service stdin and stdout. Lua errors are still sent to stderr which is
|
|
the UART0 device. Hence errors will fail silently. If you want to capture
|
|
errors then you will need to wrap any commands in a `pcall()` and print any
|
|
error return.
|
|
|
|
## telnet:open()
|
|
|
|
Open a telnet server based on the provided parameters.
|
|
|
|
#### Syntax
|
|
|
|
`telnet:open(ssid, pwd, port)`
|
|
|
|
#### Parameters
|
|
|
|
`ssid` and `password`. Strings. SSID and Password for the Wifi network. If these are
|
|
`nil` then the wifi is assumed to be configured or autoconfigured.
|
|
|
|
`port`. Integer TCP listenting port for the Telnet service. The default is 2323
|
|
|
|
#### Returns
|
|
|
|
Nothing returned (this is evaluted as `nil` in a scalar context).
|
|
|
|
## telnet:close()
|
|
|
|
Close a telnet server and release all resources.
|
|
|
|
#### Syntax
|
|
|
|
`telnet:close()`
|
|
|
|
#### Parameters
|
|
|
|
None
|
|
|
|
#### Returns
|
|
|
|
Nothing returned (this is evaluted as `nil` in a scalar context).
|