116 lines
3.2 KiB
Markdown
116 lines
3.2 KiB
Markdown
# GPIO Module
|
|
| Since | Origin / Contributor | Maintainer | Source |
|
|
| :----- | :-------------------- | :---------- | :------ |
|
|
| 2016-11-26 | [Johny Mattsson](https://github.com/jmattsson) | [Johny Mattsson](https://github.com/jmattsson) | [gpio.c](../../components/modules/gpio.c)|
|
|
|
|
|
|
This module provides access to the [GPIO](https://en.wikipedia.org/wiki/General-purpose_input/output) (General Purpose Input/Output) subsystem.
|
|
|
|
# GPIO Overview
|
|
The ESP32 chip features 40 physical GPIO pads. Some GPIO pads cannot be used or do not have the corresponding pin on the chip package (refer to the [ESP32 Datasheet](http://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf)).
|
|
|
|
- GPIO6-11 are usually used for SPI flash.
|
|
- GPIO20, GPIO24, and GPIO28-31 are not available as pins.
|
|
- GPIO34-39 can only be set as input mode and do not have software pullup or pulldown functions.
|
|
|
|
|
|
## gpio.config()
|
|
Configure GPIO mode for one or more pins.
|
|
|
|
#### Syntax
|
|
```lua
|
|
gpio.config({
|
|
gpio=x || {x, y, z},
|
|
dir=gpio.IN || gpio.OUT || gpio.IN_OUT,
|
|
opendrain= 0 || 1 -- only applicable to output modes
|
|
pull= gpio.FLOATING || gpio.PULL_UP || gpio.PULL_DOWN || gpio.PULL_UP_DOWN
|
|
}, ...)
|
|
```
|
|
|
|
#### Parameters
|
|
List of configuration tables:
|
|
|
|
- `gpio` one or more (given as list) pins, see [GPIO Overview](#gpio-overview)
|
|
- `dir` direction, one of
|
|
- `gpio.IN`
|
|
- `gpio.OUT`
|
|
- `gpio.IN_OUT`
|
|
- `opendrain` 1 enables opendrain mode, defaults to 0 if omitted
|
|
- `pull` enable pull-up and -down resistors, one of
|
|
- `gpio.FLOATING` disables both pull-up and -down
|
|
- `gpio.PULL_UP` enables pull-up and disables pull-down
|
|
- `gpio.PULL_DOWN` enables pull-down and disables pull-up
|
|
- `gpio.PULL_UP_DOWN` enables both pull-up and -down
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
#### Example
|
|
```lua
|
|
gpio.config( { gpio={19,21}, dir=gpio.OUT }, { gpio=22, dir=gpio.IN, pull=gpio.PULL_UP })
|
|
```
|
|
|
|
## gpio.read()
|
|
Read digital GPIO pin value.
|
|
|
|
#### Syntax
|
|
`gpio.read(pin)`
|
|
|
|
#### Parameters
|
|
`pin` pin to read, see [GPIO Overview](#gpio-overview)
|
|
|
|
#### Returns
|
|
0 = low, 1 = high
|
|
|
|
|
|
## gpio.trig()
|
|
Establish or clear a callback function to run on interrupt for a GPIO.
|
|
|
|
#### Syntax
|
|
`gpio.trig(pin, type [, callback])`
|
|
|
|
#### Parameters
|
|
- `pin`, see [GPIO Overview](#gpio-overview)
|
|
- `type` trigger type, one of
|
|
- `gpio.INTR_UP` for trigger on rising edge
|
|
- `gpio.INTR_DOWN` for trigger on falling edge
|
|
- `gpio.INTR_UP_DOWN` for trigger on both edges
|
|
- `gpio.INTR_LOW` for trigger on low level
|
|
- `gpio.INTR_HIGH` for trigger on high level
|
|
- `callback` optional function to be called when trigger fires, trigger is disabled when omitted. Parameters are:
|
|
- `pin`
|
|
- `level`
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
## gpio.wakeup()
|
|
Configuring wake-from-sleep-on-GPIO-level.
|
|
|
|
#### Syntax
|
|
`gpio.wakeup(pin, level)`
|
|
|
|
#### Parameters
|
|
- `pin`, see [GPIO Overview](#gpio-overview)
|
|
- `level` wake-up level, one of
|
|
- `gpio.INTR_NONE` to disable wake-up
|
|
- `gpio.INTR_LOW` for wake-up on low level
|
|
- `gpio.INTR_HIGH` for wake-up on high level
|
|
|
|
#### Returns
|
|
`nil`
|
|
|
|
|
|
## gpio.write()
|
|
Set digital GPIO pin value.
|
|
|
|
#### Syntax
|
|
`gpio.write(pin, level)`
|
|
|
|
#### Parameters
|
|
- `pin` pin to write, see [GPIO Overview](#gpio-overview)
|
|
- `level` 1 or 0
|
|
|
|
#### Returns
|
|
`nil`
|