Florian Festi
633be86ea0
New generator: JointPanel
...
Create pieces larger than your laser cutter by joining them with Dove Tails
2022-01-28 17:05:58 +01:00
Florian Festi
750b33a8ce
SlatwallDrillbox: longer side skirts
2022-01-27 22:53:23 +01:00
Florian Festi
e072226aad
DrillStand: pass edges param to sidewall
...
Use sidewall() in SlatwallDrillbox, too
2022-01-27 22:53:23 +01:00
Florian Festi
6e2e29e6ff
SlatwallDrillBox: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-27 22:53:23 +01:00
Florian Festi
b190a11cb4
DrillStand: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-23 16:24:24 +01:00
Florian Festi
28d7dc16b9
SlatwallDrillbox: Base on DrillStand to reduce copied code
2022-01-23 16:23:49 +01:00
Florian Festi
c4038696f1
BayonetBox: Minor punktuation fix
2022-01-11 09:09:32 +01:00
Florian Festi
9f4657cc64
RegularBox: Improve defaults and docs
...
Reduce surroundingspaces as it is likely that fingers won't fit for
small boxes or one with many sides.
Also add proper description instead of inheriting the one from bayonet
box directly.
2022-01-11 09:07:09 +01:00
Florian Festi
83fc970d7c
New generator: ABox
...
A simple box that is easier to use for beginners than the UniversalBox
Related: #356
2022-01-07 22:22:03 +01:00
Florian Festi
0b3a0506d7
CardBox: Further improve description
2022-01-05 21:34:15 +01:00
Florian Festi
4544bc3009
RoundedBox: Add Dove Tail Settings
2022-01-05 18:29:29 +01:00
Florian Festi
260633d9cd
PaperBox: Format description properly
2022-01-03 15:23:26 +01:00
Florian Festi
4ba1768d29
Treat all parameter descriptions as markdown
...
in the web UI
2022-01-03 13:29:12 +01:00
Florian Festi
d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
Florian Festi
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
Guillaume Collic
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
Florian Festi
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
Florian Festi
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
Florian Festi
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
Florian Festi
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
Florian Festi
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
iooner
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
Florian Festi
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
Florian Festi
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
Florian Festi
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
Florian Festi
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
Florian Festi
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
Florian Festi
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
Florian Festi
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
Florian Festi
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
Florian Festi
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
0xfab1
aad270e67e
The Royal Game of Ur Images
2021-09-19 20:37:29 +02:00
Florian Festi
cd604f0d53
CardBox: Fix height
...
Previously box was one thickness to low as the height of the lid was not
accounted for.
Thanks to hd (https://hackaday.io/hacker/1210037-hd ) for pointing this
out!
2021-09-03 13:59:11 +02:00
Florian Festi
44cf852fac
Openbox: Add edgetype parameter
2021-07-18 15:37:04 +02:00
Florian Festi
064cd71cd5
OpenBox: Remove unused bedbolt parameters
2021-07-18 15:37:04 +02:00
Florian Festi
2154245cde
AngledBox: Render surrounding walls in order
2021-06-27 16:24:01 +02:00
jens persson
a35674a736
Add labels to Cardbox
...
Added labels to CardBox
Also rearange some parts to make labels easier to read
2021-06-27 16:07:58 +02:00
jens persson
c0eca5ea5f
Add labels to boxes
...
Added labels to AngledBox, BasedBox, ClosedBox, Console2, DinRailBox,
DisplayCase and ElectronicsBox
2021-06-27 16:07:58 +02:00
Florian Festi
6238903237
Gears: Use proper metric module
...
with diameter / #teeth instead of circumference / #teeth.
Thanks to nialabert (https://github.com/nialabert ) for pointing this
out!
Resolves : #260
2021-06-26 10:58:25 +02:00
Florian Festi
3ff0df504b
DoubleFlexDoorBox: Add picture
...
and move out of Unstable.
Thanks to Targor (https://github.com/targor ) for the idea and image
Resolves : #322
2021-06-13 09:23:37 +02:00
jens persson
4df9c4aae9
Add labels to Ottobody
...
Using the label interface, render identifying labels on the Ottobody
2021-06-11 22:29:59 +02:00
Florian Festi
ef94daa006
Add mouseover images for most groups
...
Resolves : #253
2021-06-05 18:25:53 +02:00
jens persson
9a46882c8f
Add color selection to all holes
...
All methods that uses the holeCol decorator now take a parameter color.
Added semantic symbols for colors.
2021-06-03 21:40:11 +02:00
jens persson
c86ae75712
Parametrizise the drillbox
2021-06-03 21:40:11 +02:00
Florian Festi
22a50a6181
PhoneHolder: Fix edge of second side being reversed
...
The code switched sides for each edges draen reversed. Change that to
only reverse local variables and leave the edge objects unchanged.
Thanks to https://github.com/ChrisLaserman for reporting!
Resolves : #324
2021-05-31 17:04:17 +02:00
Florian Festi
be7115007d
SlatwallPinRow: Make it actually work
...
Remove finger joints from pinplate as there are not matching holes.
Move finger holes on back plate to right place.
2021-05-24 22:16:59 +02:00
Florian Festi
bdcad5ee27
New generator: SlattwallStairs
...
Renders a stair like structure that can house tools like screw drivers
if the proper holes or slots are added.
2021-05-23 13:00:52 +02:00
Florian Festi
538d5af99b
New generator: DoubleFlexDoorBox
...
Still untested and missing a sample image
2021-05-22 14:10:16 +02:00
Norbert Szulc
b0861bf937
Add platonic solid generator
...
Resolves : #254
2021-05-16 15:07:53 +02:00
jens persson
3a979bcfc6
Extend PaintStorage to make stackable drawers
...
Add an extra argument --drawer that changes it to a simple drawer
Co-authored-by: Florian Festi<florian@festi.info>
Resolves : #315
2021-05-16 14:58:18 +02:00
Florian Festi
eec53625f7
New generator: SlatwalPinRow
...
Angled pins to hang stuff from.
Still untested.
2021-05-15 15:45:44 +02:00
Florian Festi
072ff9b032
New generator: DrillStand
...
A stand-alone (no pun intended) version of the SlatwallDrillBox
2021-05-15 15:45:25 +02:00
Guillaume Collic
d478edd5d7
Add coffee capsule holder generator
2021-04-25 11:25:30 +02:00
Florian Festi
41165731c9
DisplayShelf: Fix calculations for negative angle values
2021-04-02 16:11:11 +02:00
Guillaume Collic
97d85ff10e
Add PhoneHolder
2021-03-22 22:45:55 +01:00
Mateusz Konieczny
3a3304de67
mention similar ones in burn test
2021-03-22 19:45:06 +01:00
Mateusz Konieczny
69bf15a682
serraded -> serrated typo
2021-03-22 19:41:33 +01:00
Mateusz Konieczny
9bdd5e4dda
mentioned ClosedBox and BasedBox in each other descriptions
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
23ee7b3eb2
copy closedbox description to basedbox description as applicable
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
000ba92106
fix typo in description
2021-03-20 21:26:54 +01:00
Mateusz Konieczny
e8fc07d33d
increase play in two piece to 0.15
...
note: I am very inexperienced, this is based on a single test (with 0.05 and 0.15 box) and advice from local expert
both apply to plywood
2021-03-17 15:24:46 +01:00
Florian Festi
7355d0d612
TrayLayout: Give more descriptive parse errors
...
Also allow both X and now also x for removed floor
2021-03-15 13:50:35 +01:00
Florian Festi
7397e49b2b
TrayLayout: Add description text
...
Resolves : #295
2021-03-15 13:50:35 +01:00
Mateusz Konieczny
21ca3d0b98
try to add explanation how burn test works
...
fixes #288
2021-03-02 14:12:42 +01:00
Guillaume Collic
3efd941ff1
Keyboard: 19.05 mm spacing is more standard than 19
2021-02-27 21:02:07 +01:00
Guillaume Collic
72c7fca53e
Keyboard: clean and column callback spacing default value
2021-02-27 21:02:07 +01:00
Guillaume Collic
61b85a6aed
Keyboard: add shared settings with new options
2021-02-27 21:02:07 +01:00
Guillaume Collic
0c89ad2b17
Keyboard: fix alignment in atreus21 and keypad
2021-02-27 21:02:07 +01:00
Guillaume Collic
0d4d4f308b
Keyboard: move common code to mixin (atreus21, keypad)
2021-02-27 21:02:07 +01:00
Guillaume Collic
ec8abee265
Atreus21: clean dead code and magic numbers
2021-02-27 21:02:07 +01:00
Mateusz Konieczny
44a9041427
attempt to make burn test description more newbieproof
...
fixes #284
2021-02-27 20:56:03 +01:00
Mateusz Konieczny
33917a6113
fix typo
2021-02-24 21:03:52 +01:00
Guillaume Collic
d694bd3241
Fix DividerTray length with 'outside=false'
2021-02-14 10:20:16 +01:00
Guillaume Collic
9642b9aacc
Add PaperBox
2021-01-28 13:59:47 +01:00
jomjol
eea27ee74d
Implementation of FlexSettings
...
Addding of FlexSettings to RoundedBox to adjust the flexibility setting for the corners
2020-12-29 22:29:27 +01:00
Florian Festi
e6dccc4135
StorageRack: Add pictures
...
Thanks to https://github.com/impellerturn for providing the images!
2020-12-29 15:33:27 +01:00
Florian Festi
34260e1b01
Castle: Actually add description
2020-12-29 15:18:37 +01:00
Guillaume Collic
b41a3114ca
AgricolaInsert: better thickness range support
2020-11-16 22:46:43 +01:00
Florian Festi
7afe0329a2
MakitaPowerSupply: Dynamically calculate vent holes
2020-11-10 18:00:40 +01:00
Florian Festi
043f208213
AllEdges: Fix for new backend
2020-11-09 19:15:55 +01:00
Florian Festi
09b4de82de
MakitaPowerSuppy: Replace hyphens parameter names
2020-11-09 19:15:55 +01:00
Florian Festi
cdc89e3cde
SilverwareBox: Add missing stroke() command
2020-10-20 17:00:15 +02:00
Florian Festi
90c783568f
OttoBody: Fix issue with HexHoles that broke the generator
...
Thanks to https://github.com/ottobot42 for reporting.
Resolves : #250
2020-10-19 21:00:38 +02:00
Florian Festi
dabab1880f
SpicesRack: Fix feet to support first level
2020-10-13 22:49:19 +02:00
Florian Festi
1dd567657e
Fix use of roundedPlate in Display and LaserClamp
...
Thanks to Guillaume Collic (https://github.com/gcollic ) for reporting!
Resolves : #248
2020-10-13 20:00:09 +02:00
Florian Festi
6dff8db710
Add alignment pins to BayonetBox
...
Also add a lower ring to the bayonet lid of the RegularBox limiting rotation
2020-10-13 16:07:31 +02:00
Florian Festi
f74e86c38f
BasedBox: Add description and point people to edge_width
2020-10-11 14:01:03 +02:00
Marcin Zukowski
dfc2f075d9
Adding Grooved Edge (z, Z), example use in UnevenHeightBox
2020-09-29 20:40:18 +02:00
Guillaume Collic
2a55183e50
AgricolaInsert: optimize player box generation layout
2020-09-20 12:37:29 +02:00
Guillaume Collic
9e83c2ad9b
Add AgricolaInsert box
2020-09-20 12:37:29 +02:00
Guillaume Collic
7495de72f7
DividerTray: refactor, and makes it easier to reuse
2020-09-20 12:37:29 +02:00
Florian Festi
7fd4306664
Add h edge to top_edge parameter
...
Resolves : #244
2020-09-19 22:39:30 +02:00
Marcin Zukowski
f058ce68fb
Add --lid_height in UnevenHeightBox
2020-08-28 10:35:10 +02:00
Ba-So
d34d6ed987
fixed proper use of settings in paintbox.py
2020-08-15 09:47:40 +02:00
Ba-So
f6e2773810
fixed bug where the option hexpattern=True would cause an error.
2020-08-14 12:30:21 +02:00
Florian Festi
0980270dcf
RectangularWall: Fix list of available edge types
...
M -> N
2020-08-04 23:41:08 +02:00
Florian Festi
d3fa5ec0d4
UniversalBox: Add vertical_edges parameter
...
to allow finger hole joints for more stability
Fixes: whining by wu
2020-08-04 21:52:25 +02:00
Florian Festi
efe87c3e2e
TwoPiece: Add hi parameter to allow for lower inner wall
2020-08-04 19:33:11 +02:00
Florian Festi
9bbca5419f
New generator: NemaPattern
2020-08-04 19:33:11 +02:00
Florian Festi
4d2db03dc4
New generator: FanHole
2020-08-04 19:33:11 +02:00