529574fb5d
Dispenser: Fix sideedges parameter
...
Looks like both the ArgparseEdgeType machinery and the inx conversion
should be more robust...
Thanks to https://github.com/lucky62 for reporting!
Resolves : #369
2022-02-16 17:16:36 +01:00
7eca5a6c05
Slatwall Edges: Redimentary DIN rail support
...
Added type parameter to SlatwallSettings
2022-02-11 19:17:40 +01:00
b8c8a9ec8d
Fix pstoedit for non Unix OSs
...
Resolves : #362
2022-02-07 18:06:20 +01:00
048bb11b09
BinTray: Fix settings for finger joints on 45° angles
...
Previously a new settings object was created and settings in the UI were
ignored. Now the settings are copied over.
Resolves : #364
Thanks to https://github.com/leyton01 for reporting!
2022-02-06 17:35:15 +01:00
685f364290
New generator: Dispenser
...
Related: #278
2022-01-28 22:56:05 +01:00
633be86ea0
New generator: JointPanel
...
Create pieces larger than your laser cutter by joining them with Dove Tails
2022-01-28 17:05:58 +01:00
750b33a8ce
SlatwallDrillbox: longer side skirts
2022-01-27 22:53:23 +01:00
e072226aad
DrillStand: pass edges param to sidewall
...
Use sidewall() in SlatwallDrillbox, too
2022-01-27 22:53:23 +01:00
6e2e29e6ff
SlatwallDrillBox: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-27 22:53:23 +01:00
b190a11cb4
DrillStand: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-23 16:24:24 +01:00
28d7dc16b9
SlatwallDrillbox: Base on DrillStand to reduce copied code
2022-01-23 16:23:49 +01:00
a364f603a8
Add extra_length to Finger Joint Settings
...
to allow extending the finger joints so burn marks can be ground off.
Thanks to all who have been pushing for this feature!
Resolves : #270
2022-01-16 15:18:11 +01:00
c4038696f1
BayonetBox: Minor punktuation fix
2022-01-11 09:09:32 +01:00
9f4657cc64
RegularBox: Improve defaults and docs
...
Reduce surroundingspaces as it is likely that fingers won't fit for
small boxes or one with many sides.
Also add proper description instead of inheriting the one from bayonet
box directly.
2022-01-11 09:07:09 +01:00
d29c8f7138
Consistent units for standard parameters
2022-01-09 16:20:58 +01:00
e28976d5e3
Add doc link for tabs param
2022-01-07 22:22:03 +01:00
b7b74ab27f
Settings: Add "multiple of thickness"
...
where appropriate. Before that not indication on what the numbers
actually mean were given.
2022-01-07 22:22:03 +01:00
72a111a100
Shorten parameter descriptions to fit in one line
...
The additional information is now available via help link to the user
documentation.
2022-01-07 22:22:03 +01:00
83fc970d7c
New generator: ABox
...
A simple box that is easier to use for beginners than the UniversalBox
Related: #356
2022-01-07 22:22:03 +01:00
0b3a0506d7
CardBox: Further improve description
2022-01-05 21:34:15 +01:00
4544bc3009
RoundedBox: Add Dove Tail Settings
2022-01-05 18:29:29 +01:00
5810314331
DoveTailEdge: Fix edge without dove tails
2022-01-05 18:29:09 +01:00
260633d9cd
PaperBox: Format description properly
2022-01-03 15:23:26 +01:00
9b0c842522
Fix docstring formatting
2022-01-03 13:42:40 +01:00
acf4e81159
Add links to documentation to web UI
...
for some of the parameters
2022-01-03 13:30:43 +01:00
4ba1768d29
Treat all parameter descriptions as markdown
...
in the web UI
2022-01-03 13:29:12 +01:00
d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
ee2baab396
flangedWall: Allow other edge types
...
for sides without flange. Support "e" edges for sides with flanges
(along with "E" and "F")
Resolves : #347
2021-12-04 16:02:25 +01:00
ad1be4c361
Fix placement of rectangularTriangle(s)
...
That was broken by fcefddca1eResolves : #346
Thanks to Guillaume Collic for reporting!
2021-12-01 23:37:02 +01:00
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
62b30e3d88
fix some typos with codespell
2021-11-03 15:34:38 +01:00
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
fce7e08a1a
Adjust line width in transform()
...
Pass scale param down the transform call tree.
This fixes the inner corners for the PS output which were seen as "too
big" when comparing with the wrong line width.
Resolves : #332
2021-10-09 13:59:24 +02:00
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
f6fa4967ab
surroundingWall: Fix size calculation
...
Resolves : #297
2021-09-21 23:01:53 +02:00
fcefddca1e
rectangularTriangle: Improve spacing
2021-09-21 22:52:10 +02:00
Florian Festi
Guillaume Collic
iooner
Mateusz Konieczny