95e5c26b4d
refactor: DividerTray add notches in wall by default
2022-03-27 22:21:38 +02:00
6cffe5e6a8
refactor: DividerTray obsolete lines
2022-03-27 22:21:38 +02:00
d062a1e9aa
Use elif
2022-03-27 22:09:39 +02:00
f1f829d5fb
FingerJoints: Add "snap" style
2022-03-27 22:09:32 +02:00
be0aec17cf
FingerJoints: Add "barb" style
2022-03-27 22:09:32 +02:00
e8b88e53f1
add Lightburn .lbrn2 file format support
2022-03-27 22:02:44 +02:00
1362364c33
HingeBox: Remove debugging code
2022-03-27 11:30:31 +02:00
67bd25016b
DividerTray: Add a bit of play to the dividers
...
Especially the divider over the whole width can use some play for the
slots to avoid them clamping onto the walls.
Related: #374
2022-03-21 17:53:30 +01:00
3bf4be5e1d
DividerTray: Add divider across full width
...
Resolves : #374
2022-03-21 17:46:43 +01:00
b68aa5bb0f
DividerTray: Add description
...
Related: #374
2022-03-21 17:23:29 +01:00
ec6f784442
HingeSettings: Check axle for valid values
2022-03-21 12:10:12 +01:00
a7063011b5
Add inner_corner default setting
...
to allow removing the loops in inner corners
Related: #294
2022-03-20 19:04:27 +01:00
b12fded50d
Remove backslash from description
...
as it trips up gettext.
Also update language files.
Resolves : #371
2022-03-12 18:24:11 +01:00
ea4036b3d4
ArgparseEdgeType: Re-enable Inkscape format
...
Got dropped in ecf14540f5#369
2022-02-18 10:46:11 +01:00
529574fb5d
Dispenser: Fix sideedges parameter
...
Looks like both the ArgparseEdgeType machinery and the inx conversion
should be more robust...
Thanks to https://github.com/lucky62 for reporting!
Resolves : #369
2022-02-16 17:16:36 +01:00
7eca5a6c05
Slatwall Edges: Redimentary DIN rail support
...
Added type parameter to SlatwallSettings
2022-02-11 19:17:40 +01:00
b8c8a9ec8d
Fix pstoedit for non Unix OSs
...
Resolves : #362
2022-02-07 18:06:20 +01:00
048bb11b09
BinTray: Fix settings for finger joints on 45° angles
...
Previously a new settings object was created and settings in the UI were
ignored. Now the settings are copied over.
Resolves : #364
Thanks to https://github.com/leyton01 for reporting!
2022-02-06 17:35:15 +01:00
685f364290
New generator: Dispenser
...
Related: #278
2022-01-28 22:56:05 +01:00
633be86ea0
New generator: JointPanel
...
Create pieces larger than your laser cutter by joining them with Dove Tails
2022-01-28 17:05:58 +01:00
750b33a8ce
SlatwallDrillbox: longer side skirts
2022-01-27 22:53:23 +01:00
e072226aad
DrillStand: pass edges param to sidewall
...
Use sidewall() in SlatwallDrillbox, too
2022-01-27 22:53:23 +01:00
6e2e29e6ff
SlatwallDrillBox: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-27 22:53:23 +01:00
b190a11cb4
DrillStand: Use finger holes to fix bottom in place
...
Otherwise all the weight of the drills is just held up by glue
2022-01-23 16:24:24 +01:00
28d7dc16b9
SlatwallDrillbox: Base on DrillStand to reduce copied code
2022-01-23 16:23:49 +01:00
a364f603a8
Add extra_length to Finger Joint Settings
...
to allow extending the finger joints so burn marks can be ground off.
Thanks to all who have been pushing for this feature!
Resolves : #270
2022-01-16 15:18:11 +01:00
c4038696f1
BayonetBox: Minor punktuation fix
2022-01-11 09:09:32 +01:00
9f4657cc64
RegularBox: Improve defaults and docs
...
Reduce surroundingspaces as it is likely that fingers won't fit for
small boxes or one with many sides.
Also add proper description instead of inheriting the one from bayonet
box directly.
2022-01-11 09:07:09 +01:00
d29c8f7138
Consistent units for standard parameters
2022-01-09 16:20:58 +01:00
6cb2af9cc9
Fix URL params defaults for int choices
...
URL parameters are passed in as strings so they would not register as
selected for choices with int values. As a result a render=0 link would
nt pass these parameters correctly.
Thanks to Richard Kampmann for noting and reporting this rather
obscure bug!
2022-01-08 18:20:39 +01:00
e28976d5e3
Add doc link for tabs param
2022-01-07 22:22:03 +01:00
b7b74ab27f
Settings: Add "multiple of thickness"
...
where appropriate. Before that not indication on what the numbers
actually mean were given.
2022-01-07 22:22:03 +01:00
72a111a100
Shorten parameter descriptions to fit in one line
...
The additional information is now available via help link to the user
documentation.
2022-01-07 22:22:03 +01:00
83fc970d7c
New generator: ABox
...
A simple box that is easier to use for beginners than the UniversalBox
Related: #356
2022-01-07 22:22:03 +01:00
64448d7902
cask is no longer a brew command
2022-01-07 09:44:44 +01:00
0b3a0506d7
CardBox: Further improve description
2022-01-05 21:34:15 +01:00
4544bc3009
RoundedBox: Add Dove Tail Settings
2022-01-05 18:29:29 +01:00
5810314331
DoveTailEdge: Fix edge without dove tails
2022-01-05 18:29:09 +01:00
260633d9cd
PaperBox: Format description properly
2022-01-03 15:23:26 +01:00
f0022d3754
Re-arrage footer links
2022-01-03 13:42:50 +01:00
9b0c842522
Fix docstring formatting
2022-01-03 13:42:40 +01:00
acf4e81159
Add links to documentation to web UI
...
for some of the parameters
2022-01-03 13:30:43 +01:00
4ba1768d29
Treat all parameter descriptions as markdown
...
in the web UI
2022-01-03 13:29:12 +01:00
f18462585b
User manual: More information about parameters
...
to be linked from the generator UI
2022-01-03 13:27:41 +01:00
d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
Guillaume Collic
Florian Festi
suks.ae
Stéphane MOR