Rotzbua
|
84ce484f93
|
[doc] add hint to disable reference
|
2018-09-08 15:33:09 +02:00 |
Florian Festi
|
b8ff1b8cf6
|
TrayLayout: Make parsing a bit more robust
Ignore white space at the end of lines with horizontal walls
|
2018-08-27 16:55:00 +02:00 |
Florian Festi
|
b4a95aca15
|
TrayLayout: Fix burn correction for bottom plate
All edges were missing the burn correction outset (aka kerf).
|
2018-08-27 15:13:31 +02:00 |
Florian Festi
|
fc127237fd
|
Fix placement of fingerHoles in CrossingFingerHoleEdge
which were too low by one burn
|
2018-08-27 15:12:17 +02:00 |
Florian Festi
|
0e8a718a1b
|
Fix placement of debugging rectangel for FingerHoles
Not the outer border of the lines are exactly at the border of the matching
part
|
2018-08-27 15:10:50 +02:00 |
Florian Festi
|
3767598d5d
|
Fix placement of rectangularHole() which was off by one burn
|
2018-08-27 15:09:17 +02:00 |
Florian Festi
|
ec77d6aa22
|
Doc strings for Parts methods
|
2018-08-23 23:28:24 +02:00 |
Florian Festi
|
897fc23029
|
Doc string for Boxes.flex2D()
|
2018-08-23 23:28:24 +02:00 |
Florian Festi
|
6c43f4a382
|
Doc string for Boxes.TX()
|
2018-08-23 23:28:20 +02:00 |
Florian Festi
|
a99094b8d7
|
Doc string for Boxes.partsMatrix()
|
2018-08-23 23:27:35 +02:00 |
Florian Festi
|
d360703cba
|
TypeTray: Make bottom_edge parametric
This does not affect the inside walls
|
2018-08-16 20:49:12 +02:00 |
Florian Festi
|
46175dde11
|
Fix url params for checkboxes when re-opening an input form
Thanks to Rotzbua for pointing the issue out!
|
2018-08-16 08:54:52 +02:00 |
Florian Festi
|
8563818925
|
Hook: Boxify and parametrize generator
|
2018-08-14 14:01:59 +02:00 |
Marius Bergmann
|
2831b41d21
|
Add wall hook generator
|
2018-08-14 11:55:31 +02:00 |
Florian Festi
|
f83ca31a0a
|
RoundedBox: Add wallpieces param
|
2018-08-06 19:46:48 +02:00 |
Florian Festi
|
af7f29c51f
|
Add (wall)pieces param to roundedPlate() and surroundingWall()
|
2018-08-06 19:46:23 +02:00 |
Florian Festi
|
7c8ae621f7
|
CloseBox: Put bed blots at the right places
Keep them still disabled, though.
|
2018-07-25 16:34:58 +02:00 |
Florian Festi
|
05c41be4d1
|
Remove or comment debugging outputs
|
2018-07-24 20:36:13 +02:00 |
Florian Festi
|
cd0fcdcb96
|
Set a char for CrossingFingerHoleEdge tp avoid collision with the "e" edge.
|
2018-07-02 19:13:52 +02:00 |
Florian Festi
|
44bce898e0
|
UniversalBox: Add alternative "lid" for f and F top_edges:
A rim leaving the box open
|
2018-07-02 19:07:26 +02:00 |
Florian Festi
|
2c7f9f4dc0
|
UniversalBox: Add f and F as possible top_edge types
|
2018-07-02 19:07:26 +02:00 |
Florian Festi
|
37a798e91e
|
Add top "lid" for F edge
|
2018-07-02 19:07:25 +02:00 |
Sebastian Reichel
|
8b172cbddd
|
Add 10" rack box derived from 19" rack box
|
2018-06-27 21:48:35 +02:00 |
Sebastian Reichel
|
d75ea78196
|
Add support for specifying font color/size
|
2018-06-27 21:48:35 +02:00 |
Florian Festi
|
6538c92910
|
OrganPipe: Offer multiple units for the pressure given
|
2018-05-18 14:12:30 +02:00 |
Florian Festi
|
924372f79d
|
Use a minimal line width (0.05mm) even for very small burn values
to keep the lines visible in these cases.
|
2018-05-17 11:27:58 +02:00 |
Florian Festi
|
1d0aa05e9a
|
OrganPipe: Use unicode for Py 2 compat
|
2018-05-12 17:14:02 +02:00 |
Florian Festi
|
d9e8930e31
|
OrganPipe: Add encoding
|
2018-05-12 17:11:26 +02:00 |
Florian Festi
|
4798c24815
|
New generator: Organ pipe
Still untested
|
2018-05-12 17:06:10 +02:00 |
Florian Festi
|
f99bf32c85
|
Add hinges and spacing params to CabinetHingeEdge
|
2018-05-08 23:55:09 +02:00 |
Florian Festi
|
2828a85725
|
Add flatHole() for shafts that are flattened on both sides.
|
2018-05-05 19:08:37 +02:00 |
Florian Festi
|
50b9bc9ffb
|
TypeTray: Fix finger holes in bottom which had been mirrored in x direction
|
2018-04-25 23:36:32 +02:00 |
Florian Festi
|
616bf42239
|
RegularBox: Fix top edge for "angled hole" top
|
2018-04-25 22:02:52 +02:00 |
Florian Festi
|
d3c922d289
|
RegularBox: Use FingerJointSettings for vertical edges, too
Fixes #65
|
2018-04-25 22:02:24 +02:00 |
Florian Festi
|
73438fb614
|
Fix .__getattr__ of Settings class so it can be passed to copy.copy()
|
2018-04-25 21:52:51 +02:00 |
Florian Festi
|
879ae1af68
|
DisplayShelf: Do not render front wall if set to zero
|
2018-04-15 19:43:31 +02:00 |
Florian Festi
|
ebe02e2be5
|
DisplayShelf: Use better defaults
|
2018-04-15 19:43:31 +02:00 |
Florian Festi
|
65358c9fad
|
Add hint to outside param to nominally inner sizes
|
2018-04-05 22:55:23 +02:00 |
Florian Festi
|
b2c54310b6
|
UnevenHeightBox: Fix lid
Looks like it is difficult to come up with a really non symmectrical test case.
Thanks to Mekol for pointing this out!
Related #60
|
2018-03-17 21:04:24 +01:00 |
Florian Festi
|
fa44eb27cf
|
UneveHeigthBox: Minor tweaks
|
2018-03-17 17:32:21 +01:00 |
Florian Festi
|
58cb06ec94
|
UnevenHeightBox: Add lid
|
2018-03-17 17:19:47 +01:00 |
Florian Festi
|
7c716a9e5f
|
UnevenHeightBox: Make bottom edge parametric
|
2018-03-15 20:46:00 +01:00 |
Florian Festi
|
786ff222c2
|
New generator: UnevenHeightBox
Box with different height in each corner
|
2018-03-15 19:08:47 +01:00 |
Florian Festi
|
0604744284
|
OttoSoles: Add dove tail joints to the connecting edges
|
2018-03-11 17:43:55 +01:00 |
Florian Festi
|
f2106a2c8c
|
OttoSoles: Add support for tabs
|
2018-03-11 09:13:40 +01:00 |
Florian Festi
|
49ce2ed412
|
New generator: Ottosoles
Foam soles for the OttO Bot
|
2018-03-10 19:28:30 +01:00 |
Florian Festi
|
90ba9f8ee9
|
LidEdge: Fix duplicated option for spring
|
2018-03-05 20:10:55 +01:00 |
Florian Festi
|
dd7d282c65
|
Rack19Box: Fix width and placement of holes
|
2018-02-27 18:41:39 +01:00 |
Florian Festi
|
66c419ab7f
|
New generator: Rack19Box
Closed box with screw on top for mounting in a 19" rack.
|
2018-02-27 18:04:26 +01:00 |
Florian Festi
|
c3917d3292
|
IntegratedHingeBox: switch x and y measurements
So the hinge is at the backside along the x axis
|
2018-02-20 08:23:07 +01:00 |