Commit Graph

117 Commits

Author SHA1 Message Date
Marcin Zukowski 2538f2fef3 Add optional "finger hold" to the sliding lid, present if "hole_width" > 0.
Also:
* add comments for the sliding lid parameters
* move groove-cutting logic to helper methods

Example usage:
scripts/boxes UniversalBox --bottom_edge=F --top_edge=L --Lid_spring=none --Lid_style=springs --x=100.0 --y=100.0 --h=100.0 --reference=0 --thickness=3.0 --Lid_hole_width=20
2021-06-12 11:46:37 +02:00
Florian Festi bdca0f1422 New StackableFeet edge without finger holes
first use of non ASCII edge char - what can you do...
2021-05-15 15:45:25 +02:00
Florian Festi b132569219 SlatWallSettings: Add hook_depth setting to fit into other slot styles
Some are not as deep as the ones this was originally created for
2021-04-18 18:27:44 +02:00
Florian Festi 29183ed7ed SlatWalls: Make pitch of the wall adjustable
Resolves: #312
2021-04-17 11:44:47 +02:00
Florian Festi 632a96676a Fix typo in RoundedTriangleFingerHolesEdge 2020-11-11 00:35:22 +01:00
Florian Festi 47d3600016 Add RoundedTriangleFingerHolesEdge (T) 2020-11-09 19:15:55 +01:00
Marcin Zukowski dfc2f075d9 Adding Grooved Edge (z, Z), example use in UnevenHeightBox 2020-09-29 20:40:18 +02:00
Florian Festi e35447e536 Fix FlexEdge to use separate path for the flex cut
to allow continous outlines for parts.

Resolves: #242
2020-09-15 17:44:58 +02:00
Florian Festi a0c04d10ca Add description to ClickSettings 2020-08-04 23:42:12 +02:00
Florian Festi 7c004e2d2c New primitive: Boxes.step()
Outset a line by a given margin - negative values for insetting
2020-02-28 17:46:44 +01:00
Florian Festi dd0f2d748c ChestHingeSettings: check pin_height for minimal size 2020-02-01 14:27:17 +01:00
Florian Festi 0f3eb5b21a StackableSettings: check angle for invalid values 2020-02-01 14:16:26 +01:00
Florian Festi 8cb5a8e042 Check values of flex settings 2019-12-14 13:09:43 +01:00
Florian Festi fe9555a79f checkValues 2019-12-14 13:09:43 +01:00
Florian Festi 83b5363bc8 StackableEdge: Fix margin for upper (S) variant 2019-11-04 17:05:18 +01:00
Florian Festi cfbcbb065c Clarify doc string for FingerJointSettings.play 2019-10-19 12:03:57 +02:00
Florian Festi 13ecfc9914 Support springs for finger joints (FingerJointSettings.style)
Resolves: #177
2019-10-11 22:32:57 +02:00
Florian Festi 9db79243f8 Make Slide-on Lid with pin easier to insert
Make slot half a thickness wider and round the corners

Resolves: #156

Thanks to Matthijs Kooijman for suggesting this change!
2019-08-17 00:05:13 +02:00
Matthijs Kooijman 8ecf04cbe8 Fix handling of space in LidSideRight/Left
Previously, the extra space was added above the first pin and below the
(optional) second pin. This would cause the lid to misalign with the
holes in the back wall, making it harder to close the lid.

With this commit, the extra space is divided evenly above and below the
nominal position of the pin.

For this to work, the startwidth (or endwidth, depending on the side) is
slightly adjusted (since the start of the first pin slot is actually
generated by the adjacent edge). This moves the starting point, so the
location of the spring hole is adjusted to compensate for that.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman 3bd4dc9907 Fix spring hole offsets by burn in LidSideRight/Left 2019-07-27 13:30:06 +02:00
Matthijs Kooijman 4691a65a29 Let LidSideRight/Left respect edge_width
This allows modifying the height of the wall that extends above the lid.

The box back wall (with holes) would already support edge_width, so this
makes it supported on all three walls where needed.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman db1da4ec12 Fix hole positions offset by burn in FingerHoleEdge
When rendering the FingerHoleEdge, the current position would be
corrected for burn (e.g. it would be on the center of the laser path,
rather than the actual edge of the final part). However, the FingerHoles
class (or actually the rectangularHole method called by it) that draws
the actual holes already corrects for burn, which caused the hole
position to be offset by the burn value.

This offset was particularly problematic when making a sliding lid,
since the holes would not align perfectly with the lid, making it hard
to close the lid. With this change, the sliding slots in the side walls
and the holes in the back wall align perfectly (though only when the lid
settings have zero play, which is a separate problem).

This commit fixes FingerHoleEdge (and its subclass LidHoleEdge), but
there might be other users of the FingerHole class (usually indirectly
through boxes.fingerHolesAt) that still have the same problem.
2019-07-27 13:30:06 +02:00
Matthijs Kooijman eeb2c344d5 Clarify where l and L edges should be used 2019-07-27 13:30:06 +02:00
Florian Festi db706fc939 SlatWall edges: Make bottom hook selectable, various fixes 2019-06-21 21:36:28 +02:00
Florian Festi 5cef906a9a Add SlatWallHoleEdge (dD) classes
Similar to FigerHolesEdge (h)
2019-06-21 18:47:29 +02:00
Florian Festi aadf5ceafc Add Edge types, example and UIGroup for slat wall compatible boxes 2019-06-13 19:00:32 +02:00
Florian Festi 7aec26e893 New .polygonWall() part
Similar to .polyline() but with (f) edges on the outside
.polygonWalls draws the surrounding walls
2019-03-24 21:50:36 +01:00
Florian Festi cbb000f12e DoveTailJoint: remove no longer needed ctx.translate 2019-02-24 14:45:57 +01:00
Florian Festi abed8c06ac FingerHoles: use .saved_context() 2019-02-24 14:42:48 +01:00
Florian Festi 72617110cf FingerHoleEdge: Use modern code and add tab support 2019-02-24 13:14:21 +01:00
Florian Festi eb5f3008da RoundedTriangleEdge: Add tabs 2019-02-24 12:16:47 +01:00
Florian Festi 9b1ce265bf Make docstrings ready for autodoc 2019-02-13 09:01:20 +01:00
Florian Festi 2e5a19a40f Python 2 compat fix 2019-01-12 18:42:44 +01:00
Florian Festi dac6b3ac3d Fix Edge descriptions
Add descriptions for edges that don't have their own class

Make ChestHingeFront sub class of Edge as BaseEdge no longer draws anything
2019-01-12 15:28:17 +01:00
Florian Festi 1739d11af5 Doc string for GearSettings 2019-01-12 15:28:17 +01:00
Florian Festi ba3cacbf93 RoundedTriangleEdge: Add outset setting 2019-01-12 00:07:22 +01:00
Florian Festi 31fd0024ee Add RoundedTriangleEdge t
Based on the Caddy generator by bobm123 in the PR #14
(https://github.com/florianfesti/boxes/pull/14)

Edge will be added to the TypeTray generator to achieve similar results as Caddy

Co-authored-by: bobm123 <bobm123@gmail.com>
2019-01-11 23:56:28 +01:00
Florian Festi b7bd6306d1 Fix division by zero in FlexEdge 2018-11-05 21:38:49 +01:00
Florian Festi 60cb0eed87 CabinetHinge: Add style param with new value outside 2018-10-04 22:18:07 +02:00
Florian Festi fc127237fd Fix placement of fingerHoles in CrossingFingerHoleEdge
which were too low by one burn
2018-08-27 15:12:17 +02:00
Florian Festi 0e8a718a1b Fix placement of debugging rectangel for FingerHoles
Not the outer border of the lines are exactly at the border of the matching
part
2018-08-27 15:10:50 +02:00
Florian Festi cd0fcdcb96 Set a char for CrossingFingerHoleEdge tp avoid collision with the "e" edge. 2018-07-02 19:13:52 +02:00
Florian Festi f99bf32c85 Add hinges and spacing params to CabinetHingeEdge 2018-05-08 23:55:09 +02:00
Florian Festi 73438fb614 Fix .__getattr__ of Settings class so it can be passed to copy.copy() 2018-04-25 21:52:51 +02:00
Florian Festi 90ba9f8ee9 LidEdge: Fix duplicated option for spring 2018-03-05 20:10:55 +01:00
Florian Festi 78d35a92e0 Fix CrossingFingerHoleEdge
which relies on __call__() of the super class drawing a line
2018-02-12 22:04:20 +01:00
Florian Festi 4e034949d3 Fix tabs for straight edges (eE) with bed bolts
Add tabs param to bedBoltHole
2018-01-19 23:48:27 +01:00
Stefan Grosshauser 73e1821e71 enable bedbolts for Straight 'e' and OutSet edges 'E'
note that this mostly ignores that positioning bedbolts is done
in the BedBolt class for finger joints.
Coding style could be much improved.
2018-01-18 15:07:33 +01:00
Stefan Grosshauser 07f88cd8e5 make __call__() abstract for BaseEdge; and inherit OutSetEdge from Edge 2018-01-18 15:07:24 +01:00
Florian Festi 7bd2b9e452 HingeEdge: Add tabs to hinge disk 2017-12-20 18:25:55 +01:00