c4038696f1
BayonetBox: Minor punktuation fix
2022-01-11 09:09:32 +01:00
9f4657cc64
RegularBox: Improve defaults and docs
...
Reduce surroundingspaces as it is likely that fingers won't fit for
small boxes or one with many sides.
Also add proper description instead of inheriting the one from bayonet
box directly.
2022-01-11 09:07:09 +01:00
d29c8f7138
Consistent units for standard parameters
2022-01-09 16:20:58 +01:00
6cb2af9cc9
Fix URL params defaults for int choices
...
URL parameters are passed in as strings so they would not register as
selected for choices with int values. As a result a render=0 link would
nt pass these parameters correctly.
Thanks to Richard Kampmann for noting and reporting this rather
obscure bug!
2022-01-08 18:20:39 +01:00
e28976d5e3
Add doc link for tabs param
2022-01-07 22:22:03 +01:00
b7b74ab27f
Settings: Add "multiple of thickness"
...
where appropriate. Before that not indication on what the numbers
actually mean were given.
2022-01-07 22:22:03 +01:00
72a111a100
Shorten parameter descriptions to fit in one line
...
The additional information is now available via help link to the user
documentation.
2022-01-07 22:22:03 +01:00
83fc970d7c
New generator: ABox
...
A simple box that is easier to use for beginners than the UniversalBox
Related: #356
2022-01-07 22:22:03 +01:00
64448d7902
cask is no longer a brew command
2022-01-07 09:44:44 +01:00
0b3a0506d7
CardBox: Further improve description
2022-01-05 21:34:15 +01:00
4544bc3009
RoundedBox: Add Dove Tail Settings
2022-01-05 18:29:29 +01:00
5810314331
DoveTailEdge: Fix edge without dove tails
2022-01-05 18:29:09 +01:00
260633d9cd
PaperBox: Format description properly
2022-01-03 15:23:26 +01:00
f0022d3754
Re-arrage footer links
2022-01-03 13:42:50 +01:00
9b0c842522
Fix docstring formatting
2022-01-03 13:42:40 +01:00
acf4e81159
Add links to documentation to web UI
...
for some of the parameters
2022-01-03 13:30:43 +01:00
4ba1768d29
Treat all parameter descriptions as markdown
...
in the web UI
2022-01-03 13:29:12 +01:00
f18462585b
User manual: More information about parameters
...
to be linked from the generator UI
2022-01-03 13:27:41 +01:00
d5654137a4
RoundedBox: Allow arbirtary horizontal layers
...
by changing h param to sh.
Also surroundingWallPiece to get the dimmensions of each section in the
surrounding wall.
Resolves : #339
Thanks to Florin Furdi for the idea!
2022-01-02 13:48:32 +01:00
ff6a2b955a
CardBox: Put lid pieces together
...
to make it easier to understand that goes together
2022-01-02 12:11:56 +01:00
0c023f2e5f
Paperbox: Add second design better suited for smaller lids
...
Based on discussion in #351
Suggested by and co-developed by https://github.com/fuddl
2022-01-02 12:11:14 +01:00
fdc8618900
Cardbox: point to the right picture in description
2022-01-02 11:08:49 +01:00
9a98a50506
DrillBox: Move to Tray group
2021-12-15 14:18:17 +01:00
bfe39861fa
DrillBox: Make layers adjustable
...
Now one can have any number of layers at any height. This may make the
generator useful for other application with custom hole patters on
different height. It also allows deleteing holes for short drills on the
lower layers.
Thanks to https://github.com/KittyDreadful for suggesting this!
Related: #339
2021-12-15 14:18:17 +01:00
9b0ebad0e7
DrillBox: Make bottom edge configurable
2021-12-15 14:18:17 +01:00
68e0bae6a9
DrillBox: Set finger joint details as defaults
...
instead of hard coding them
2021-12-15 14:18:17 +01:00
866714ef7e
Fix Typo
2021-12-14 22:20:56 +01:00
a593e8e85b
setup.py: Require Python>=3.6 and affine>=2.0
...
As older versions won't actually work
Resolves : #349
Thanks to https://github.com/gadgetmind for reporting!
2021-12-12 12:44:20 +01:00
b11f9b0f1a
BinTray: Fix finger holes in side walls
...
Pattern was mirrored before.
Resolves : #348
Thanks to https://github.com/Al0rin for reporting!
2021-12-04 18:52:31 +01:00
ee2baab396
flangedWall: Allow other edge types
...
for sides without flange. Support "e" edges for sides with flanges
(along with "E" and "F")
Resolves : #347
2021-12-04 16:02:25 +01:00
ad1be4c361
Fix placement of rectangularTriangle(s)
...
That was broken by fcefddca1eResolves : #346
Thanks to Guillaume Collic for reporting!
2021-12-01 23:37:02 +01:00
8b791b32b6
TypeTray: Use h edge for sides if back_height is set
...
Better support pulling forces if tray is screwed to a wall.
2021-11-17 17:58:13 +01:00
a0f8fdd975
TypeTray: Fix front when back_height is set
...
Side edges did not fit into side walls.
Resolves : #336
Thanks to https://github.com/RestlessRabbits for reporting!
2021-11-17 17:58:13 +01:00
bf5e3ecc76
replace normalize.css by modern-normalize.css
...
normalize.css v4.1.1 published 5 years ago and abandoned 2018; replaced by currently maintained modern-normalize
2021-11-11 12:15:22 +01:00
5b76519408
remove unused outdated and lint css
2021-11-11 12:15:22 +01:00
a596f79814
change to html5 style
2021-11-11 12:15:22 +01:00
d43d44bf66
fix wrong encoding header from server
2021-11-11 11:04:16 +01:00
8d30892d23
Remove unreachable code
2021-11-11 11:03:28 +01:00
4319b704dd
DrillBox: Fix holes diameter
...
by removing radius vs diameter mixup
Resolves : #338
Thanks to https://github.com/KittyDreadful for reporting!
2021-11-08 14:06:24 +01:00
62b30e3d88
fix some typos with codespell
2021-11-03 15:34:38 +01:00
40e56bf26f
TypeTray: Add back_height parameter
...
to allow mounting space similar to SlatwallTypeTray
2021-10-30 22:01:36 +02:00
c3faa8f5a8
Folder: Add settings tab for flex
...
Remove unused Fingerjoint Settings
2021-10-24 23:19:17 +02:00
fce7e08a1a
Adjust line width in transform()
...
Pass scale param down the transform call tree.
This fixes the inner corners for the PS output which were seen as "too
big" when comparing with the wrong line width.
Resolves : #332
2021-10-09 13:59:24 +02:00
46f350d483
LaserClamp: Add image
...
Thanks to pmr21uk (https://github.com/pmr21uk ) for the picture!
Resolves : #333
2021-10-01 18:45:17 +02:00
ddba17597c
Resize ShutterBox-3.jpg
2021-09-26 18:02:44 +02:00
cbbe8c11cc
Shutterbox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:33:29 +02:00
d6c8d965c3
RoundedBox: More pictures
...
Thanks to Taylor Williams (https://github.com/tzwilliams )!
2021-09-26 17:04:18 +02:00
a2678de3e2
SilverwareBox: Fix edge of surrounding wall
...
and remove bogus arc holes at the corners
2021-09-21 23:02:47 +02:00
f6fa4967ab
surroundingWall: Fix size calculation
...
Resolves : #297
2021-09-21 23:01:53 +02:00
fcefddca1e
rectangularTriangle: Improve spacing
2021-09-21 22:52:10 +02:00
Florian Festi
Stéphane MOR
Guillaume Collic
iooner
Rotzbua
Mateusz Konieczny