* Upgrade u8g2 and add updateDisplayArea bindings
* u8g2 2.25.10
* add displays for 2.24.3 and 2.25.10
* remove workaround for hal pointer and make use of u8x8's user_ptr
* fix doc
* add binding for `updateDisplay()`
* Lua string optimisation in file.c + get/put contents methods
* Doc fix: move putcontents() into correct alphabetic order slot in list of static methods
* Rebaseline firmware to non-OS SDK version 3.0
* Note that SDK version 3.0 introduces the concept of a Flash Partition Table(PT). This is located at Flash offset 0x10000 in our firmware build.
* The firmware is now PT aware with both LFS and SPIFFS taking their partition size and location from the PT
* A new tool `tools/nodemcu-partition.py` is now used to initialise these data and can also download LFS and SPIFFS images to these partitions.
* I2C driver speed-up, i2c.SLOW, i2c.FAST and user-defined speed selection
* - Multiple buses (up to 10) with different speeds on each bus
- Standard(Slow, 100kHz), Fast(400kHz) and FastPlus(1MHz) modes or an
arbitrary clock speed
- Sharing SDA line over multiple I²C buses to save available pins
- GPIO16 pin can be used as SCL pin, but it does not support clock
stretching and selected bus will be limited to FAST speed.
* Dynamic memory allocation, error checks, simplification, timing tweaks.
* Separated the code of old driver for better compatibility and simplicity
* Change of driver interface
* Add bus status check in setup(); simplify getDC(); remove unnesessary lines in ACK read/write
* Fix for moved doc file and trailing whitespaces
* DHT11 read sometimes failed with checksum error.
The code assumed DHT11 devices only ever return zero in the temperature and humidity decimal fraction bytes. The datasheet doesn't guarantee this is the case, and by observation I have noticed that indeed the DHT11 may sometimes return another number, usually close to zero. This means that the code would fail with a checksum error, as the fraction bytes were not included when the checksum was calculated. These bytes are now taken into account and also returned as part of the measurement.
This also means that the related dht.read() function is non-functional. If you have a DHT11 device that returns a non-zero decimal part, dht.read() will interpret it as a DHT22 result and return the wrong measurement. For this reason dht.read() should be retired. This patch does not address this issue.
A block of memory is accessed after having been freed. This was obscured by the fact that 'oBuf' is a pointer into the middle of the block 'dynamicTables', so when dynamicTables is freed, oBuf is pointing to freed memory. Occasionally, luac.cross would crash because of this.
Files changed only by the author of FatFS (only updated to new version):
- 00history.txt
- 00readme.txt
- ff.c
- ff.h
- ffunicode.c
- diskio.h
- integer.h
- files in `option` folder except `syscall.c`
Changes:
- removed option folder (now everything is in ffunicode.c)
- modified Makefile to support new version of FatFS
- removed syscall.c and modified ffsystem.c from FatFS author instead
- modified files: diskio.c, ffconf.h to mimic changes from new version
- modified files: fatfs_config.h, myfatfs.c
because of changes of configuration keywords in 0.13 version
- removed empty lines from beginning of files:
fatfs_prefix_lib.h, myfatfs.c, sdcard.c
- changed version number in documentation
* Update TLS protocol support
TLS1.0 is past PCI's EOL; BEAST is no more
Enable elliptic curve key exchanges
Do not enable the smallest ECs for security
Do not enable the largest ECs for computational time
Do not enable 25519 (sad) because it doesn't go across the wire
Drop non-PFS key exchanges
Drop ARC4, Blowfish, DES, genprime, XTEA code
Drop renegotiation support completely
It takes so much heap that it's not likely to work out well
Tidy handling of SSL_BUFFER_SIZE
Update docs
Drop mention of startcom, since they are no more, for letsencrypt
* Update mbedtls to 2.7.7
Preserve our vsnprintf and platform hacks
* Introduce TLS maximum fragment size knob
Reduce buffer size to 4Ki by default and advertize that. That's the
largest we can advertize with the TLS MFL extension, so there's no
point in making them larger. The truly adventurous can re-raise
SSL_BUFFER_SIZE and undefine the SSL_MAX_FRAGMENT_LENGTH_CODE and get
back to the earlier behavior.
* Default to mbedTLS debug with DEVELOP_VERSION
* Add spi.set_clock_div
This will allow the SPI clock divider to be changed relatively simply,
to better support multiple devices with varying SPI clock rate support
* Add documentation
* MQTT: handle large/chunked/fragmented messages properly
If a message spans multiple TCP packets it must be buffered before
delivered to LUA. Prior code did not do this at all, so this "patch"
really adds proper handling of fragmented MQTT packets.
This could also occur if multiple small messages was sent in a
single TCP packet, and the last message did not completely fit in that
packet.
Introduces a new option to the mqtt.Client constructor:
max_publish_length which defaults to 1024
Introduces a new 'overflow' callback.
Fixes issue #2308 and proper fix for PR #2544.
* mqtt.md: clarified heap allocation
* mqtt: ensure ack is sent for overflowed publish
If QoS is used we should still acknowledge that we received it, or server might retransmit it later.
The volume returned by file.mount() could not be unmounted, because vol:umount() would fail with a cryptic error about the uncallable nature of the volume userdata object. This was due to the wrong metatable name being used for setting up the volume structure. The correct name, as registered elsewhere in file.c, is now used, and vol:umount() is callable.
Any TCP packet with more than 1024 bytes of payload was silently
dropped. With MTU of 1500 the TCP payload can be up to 1460 bytes
(1500 - 20(IP hdr) - 20(TCP hdr))
- Optimise ROTable accesses and interface
This includes some refinements to the ROTable cache which remove the linker cludges on the CROSS_COMPILE builds. Also keyhole tweaks to some of the Lua VM code to implrove runtimes.
I also noticed some compile time warnings during the build; the change to uz_unzip.c doesn't impact the compiled code, but does remove the compiler warnings.
Use separate names for the integer and float `luac.cross` binaries. Also adds local/lua directory which is already supported by tools makefile to build LFS image.
* updated wifi_eventmon to store events in LUA_REGISTRYINDEX
* updated wifi_eventmon debug comments
* Updated wifi.c to remove c_free()
In wifi_ap_listclient(app/modules/wifi.c), c_free() was replaced with
wifi_softap_free_station_info()
* Removed unnecessary line of code from app/modules/wifi_eventmon.c
* fix application of patch 0018-feat-espconn-Modification-for-espconn.patch in #2269
espconn_tcp_reconnect() was removed instead of espconn_list_delete()
* pmsleep refactor
* Shortened swtmr disabled message
* Added swtimer debug module option to user_modules.h.
* Added comments to user_config.h.
* Fixed error in documentation for node.sleep()
* remove blank sntp.c that got added in during rebase onto dev(6218b92)
* Added #ifdefs around SWTIMER_REG_CB to prevent inclusion of disabled
code
Added `node.egc.meminfo()` to expose LVM usage (to make the regular
`node.egc.ON_MEM_LIMIT` option usable).
Extended the `node.egc.ON_MEM_LIMIT` option to also take negative limits,
in which case that's taken as a request to keep a certain amount of heap
available for non-Lua use.
ds18b20 decimals do not take into account the sign bit. Since the original calculation was not so readable, rewritten in readable way that also fixes the bug. Same code as PR against master.
Initial commit for
https://github.com/nodemcu/nodemcu-firmware/issues/2225 .
Replay patches from Espressif's repository at
https://github.com/espressif/ESP8266_NONOS_SDK between tags v2.1.0 and
v2.2.0:
0001-sync-from-ccca00f2.patch
Superseded by existing changes, but lines reordered in app/driver/key.c
to minimize divergences.
0002-sync-from-3f38ad5a.patch
Upstream files only
0003-Update-links.patch
Not meaningful to NodeMCU
0004-sync-from-01990ad0.patch
0005-sync-from-cdf6877d.patch
Upstream files only
0006-sync-from-f29e744c.patch
Upstream files only, user_interface.h override non-conflicting
0009-feat-lwip-Move-lwip-source-code-to-third_party-folde.patch
Merged change to lwip/app/espconn_udp.c; rest is just moves or
appears to not apply.
0010-feat-mbedtls-Add-mbedtls-source-code-in-third_party-.patch
Does not apply; we use our own mbedtls
0011-added-C-support.patch
Merged to Makefile
0012-feat-mbedtls-Rebuild-libmbedtls.patch
Already applied
0013-fix-at-Fix-some-bugs-of-AT.patch
Upstream files only
0014-feat-err_t-Redefine-err_t-to-s32_t.patch
Merged to app/include/arch/cc.h and ./app/include/lwip/app/espconn.h;
the rest is upstream files.
0015-fix-wpa-Fix-wpa-wpa2-ptk-gtk-reinstallation-vulnerab.patch
0016-fix-wifi-Remove-group-key-entry-before-connecting-to.patch
0017-feat-lib-Remove-time-function-in-libmain.patch
Upstream files only
0018-feat-espconn-Modification-for-espconn.patch
Merged to app/include/lwip/app/espconn.h,
app/include/lwip/app/espconn_tcp.h, app/lwip/app/espconn.c,
app/lwip/app/espconn_tcp.c
0019-feat-at-Use-new-espconn_recv-to-fix-tcp-server-issue.patch
0020-feat-examples-Update-mqtt-demo-and-auto-bin-generate.patch
Upstream files only
0021-wifi-Add-scan-threshold-and-dwell-time.patch
0022-feat-wifi-Add-country-code-API.patch
0023-feat-wifi-Record-more-information-of-scanned-ap.patch
Upstream files only, user_interface.h override non-conflicting
0024-fix-example-Fix-IoT_Demo-user-sector-error.patch
Upstream files only
0025-fix-lwip-Fix-sequence-number-error-of-RST-ACK.patch
Merged app/lwip/core/tcp_in.c
0026-fix-mbedtls-Fix-memory-leak.patch
Merged app/mbedtls/app/lwIPSocket.c
0027-fix-mbedtls-Fix-call-send-callback-function-failed.patch
Merged app/mbedtls/app/espconn_mbedtls.c
0028-feat-Add-USE_OPTIMIZE_PRINTF-in-third_party-Makefile.patch
Merged app/Makefile
0029-fix-api-Fix-ets_delay_us-declaration.patch
Upstream files only, osapi.h override non-conflicting
0030-fix-wifi-Remove-max_tx_power-in-wifi_country_t-in-li.patch
0031-fix-wifi-Fix-softAP-wrong-behavior-after-call-system.patch
0032-fix-wifi-bugfix-of-scan-fail-after-connected-if-max-.patch
0033-feat-at-Enable-scan-time-scan-type-and-add-scan-resu.patch
0034-feat-at-Add-command-AT-CWCOUNTRY.patch
0035-fix-at-Fix-that-AT-CIPSTART-causes-busy-if-the-serve.patch
Upstream files only
0036-feat-mbedtls-Speed-up-mbedtls-handshake-process.patch
Merged app/mbedtls/app/espconn_mbedtls.c
0037-fix-api-Fix-os_calloc-declaration.patch
Merged app/include/lwip/mem.h; sdk-overrides/include/mem.h
non-conflicting.
0038-fix-mbedtls-Fix-disconnect-callback-function-never-b.patch
Merged app/mbedtls/app/espconn_mbedtls.c; minor revision to logic in
6576af959b. Whitespace fixes.
0039-feat-at-Add-country-code-start-channel-in-AT-CWCOUNT.patch
0040-fix-net80211-Fix-Null-pointer-in-ieee80211_rfid_locp.patch
Upstream files only
0041-feat-wifi-Add-new-esp_init_data_default-v08-bin.patch
Upstream files only, but impacts Makefile
0042-fix-mbedtls-Fix-load-cert-fail-when-the-private-key-.patch
Merged app/mbedtls/app/espconn_mbedtls.c
0043-fix-wifi-The-start-channel-can-be-any-valid-channel.patch
0044-fix-wifi-Fix-scan-do-not-start-after-connect.patch
0045-feat-wifi-Add-keep-connection-for-station-to-keep-co.patch
0046-feat-at-Update-AT-version-to-1.6.0.0.patch
0047-fix-at-Fix-GSLP-too-long-time.patch
0048-fix-at-Fix-the-message-is-incorrect-when-creating-UD.patch
0049-feat-at-Add-AT-CIPSERVERMAXCONN.patch
Upstream files only
0050-feat-system-Add-softap-distributes-station-ip-event.patch
Upstream files only, user_interface.h override non-conflicting
0051-feat-example-Use-libmbedtls.a-instead-of-libssl.a-in.patch
Upstream files only
0052-feat-mesh-Remove-mesh-support.patch
Upstream files only, but go ahead and remove comment from
ld/nodemcu.ld.
0053-fix-example-Fix-forget-to-add-integer-parameter-when.patch
Upstream files only
0054-fix-mbedtls-Fix-reconnect_callback-is-not-triggered-.patch
Merged app/mbedtls/app/espconn_mbedtls.c
0055-feat-at-Add-AT-SYSMSG-to-enable-some-report-informat.patch
0056-fix-at-Fix-the-incorrect-link-id-when-client-connect.patch
0057-fix-at-Fix-the-bug-that-it-should-be-error-when-the-.patch
0058-fix-smartconfig-Fix-the-smartconfig-scan-time-issue.patch
0059-fix-lwip-Fix-the-bug-of-lwip-output.patch
Upstream files only
0060-fix-lwip-Fix-the-length-of-TCP-data-in-one-packet-is.patch
0061-fix-lwip-Fix-send-TCP-data-with-two-or-more-pbuf.patch
Merged app/lwip/core/tcp_out.c
0062-fix-wifi-Fix-assert-happen-when-smartconfig-start-th.patch
Upstream files only
0063-fix-mbedtls-Fix-memory-leak-when-ESP8266-as-SSL-TLS-.patch
Merged app/mbedtls/app/espconn_mbedtls.c
0064-fix-mbedtls-Fix-already-freed-and-exception-bug-when.patch
Merged app/mbedtls/app/lwIPSocket.c
0065-fix-at-Fix-bug-that-there-is-no-result-when-sending-.patch
0066-feat-example-Add-AT-bin-version.patch
0067-feat-version-Update-version-to-2.2.0-and-add-version.patch
0068-feat-bin-Update-AT-bin-for-SDK-2.2.0.patch
Upstream files only
Apply local changes to build:
app/include/lwip/app/espconn.h pulls changes (and license decl) from
upstream SDK. Makefile is altered to use this file ahead of the
SDK's.
Remove lwip's sntp support, since it was never really wired in anyway.
See https://github.com/nodemcu/nodemcu-firmware/issues/2042 for more
information. Patch Makefile to strip time.o, the consumer of lwip's
sntp functionality, from libmain.a, resulting in much
easier-to-understand error messages.
This has consequences for mbedtls. The simplest thing to do, which is,
impressively, not a change in behavior, is to completely disable TLS
certificate time validation; a later patch can optionally couple this to
RTCTIME support.
Similarly, it happens that the sqlite3 import was calling time(), but
this was not going to work out well for it. Just stub it out to always
return unix timestamp 0, as would have happened anyway.
Changes unprocessed:
0007-sync-from-080c37e1.patch
0008-feat-lib-Compile-some-libraries-with-ffunction-secti.patch
These two make changes to the linker script; perhaps
they are worth porting over, but I have not done so
here.
This is build-tested (ADC, BIT, COLOR_UTILS, CRON, CRYPTO, DHT, ENCODER,
FILE, GPIO, HTTP, I2C, MQTT, NET, NODE, OW, PCM, PERF, PWM, RTCFIFO,
RTCMEM, RTCTIME, SNTP, SPI, SQLITE3, STRUCT, TLS, TMR, UART, WIFI,
WS2812, WS2812_EFFECTS) and boots, but only limited run-time testing has
been performed. Testing done does, however, include having made a few
TLS connections through the HTTP module, so things are not hopelessly
broken, at the very least.
* mbedtls 2.7.0 (mbedtls-2.7.0-0-g32605dc8)
Wholesale import, with a few changes from earlier preserved through.
Ideally we would soon get to the point of having no divergences from
upstream.
* tls: add function to adjust mbedTLS debug level
* Fix some subtle timing issues with gpio.pulse
* Add the pulse:update method
* Allow getstate to work on stopped pulsers
* Make gpio.mode(, gpio.OUTPUT) actually set the output mode
* Added some more documentation
Disable the error callback of mqtt.client:connect() after a successful connection.
This will prevent this function to be called after a future disconnection.
Instead the "offline" function is called.
in float build, uV and sign are included in mV
in int build, uV and mV are absolute, sign is -1, 0, 1
added rounding of uV values
added optional test function
* ads1015 is supported, up to 4 devices can be connected at the same time
* removed debug, updated documentation
* changed to oop API
* added __gc to handle active timer cleanup
* reworked argument validation and error reporting
* stack is no longer messed up after __del
* ws2812 effects and color utils modules added
* Added documentation for new modules to mkdocs.yml
* changed mode option to string, documentation, default modules fixed
* updated user_modules.h
* add final sqlite3 patch
* remove unused defines, join caching code with esp vfs code to reduce exported symbols and shrink final file size
* Modules should by default be disabled and in alphabetical order
* mbedTLS update
* mbedtls: vsnprintf macroification
* Further update mbedTLS to 2.6.1
* mbedtls: make debugging work again
* Silence SSL messages on normal teardown
* Drop DTLS support from mbedtls
* Add support of counting of interrupts
* Update the timestamp when interrupt happens during dispatch. Also
clear out interrupts when setting up a new callback
* Make the rtc variables not be cleared by the .bss initialization
* Move the save to the right place
* Make sure that we reset the rtctime to 0 if we didn't sleep properly.
* Setting the seconds to zero doesn't update the dsleep calibration
That file is supposed to only be included once because it does things
like declare static globals. As it stands, cron doesn't believe time is
ticking.
Fixes#2080
* Improve RTC timekeeping -- includes clock rate tracking
* Improved division by 1M
* Fix crash in sntp
* Disable RTC debug
* Get the offset correct
* Add comments on where the mysterious numbers came from
* Fix a crash with auto repeat mode and errors on repeat
- Move jsonsl build to regular library build rather than #include the .c file
- Provide wrappers for malloc/calloc/free to fix undefined symbol warnings.
* fix 2007 Call callback in all cases, call callback with errorcode -1 if no connection could be establioshed
* change logging from ERR to DEBUG
* make debug output more clear (hopefully)
* add handling of errors to docs, note error handling on every call instead of only in the main documentation
* Add event callbacks to wifi.sta.config() and wifi.ap.config() and more
Added option to register event callbacks during configuration of both
station and AP.
Added option to register event callbacks to `wifi.sta.connect()` and
`wifi.sta.disconnect()`
* Add note about event registration to wifi module documentation
Other minor changes to wifi documentation are also included
* Add more detail to documentation for wifi.sta.config()
The following functions were removed:
- `wifi.sta.eventMonReg()`
- `wifi.sta.eventMonStart()`
- `wifi.sta.eventMonStop()`
The corresponding documentation has also been removed
This PR addresses issue #1893
Documentation for the old(argument) style of station configuration was
removed in a previous PR, so I added a deprecation message to inform
developer of the upcoming removal of the feature.
* Fix the error callback from not being called sometimes
* Moved the setting of the reconnect status to after the connack is recevied
* Increase the irom0_seg size
* Updated the documentation
* Make it clearer that autoreconnect is deprecated
* Update wifi event monitor documentation
Added a note to `wifi.eventmon.register()` and `wifi.sta.eventmonreg()`
* Add deprecation note to `wifi.sta.eventMonReg()`
Nikolay Fiykov
Terry Ellison
devsaurus
ziggurat29
Nathaniel Wesley Filardo
Natalia
Philip Gladstone
sergio
Mark Schlögel
Javier Peletier
galjonsfigur
andyleap
Johan Ström
Carsten Elton Sørensen
Nate Clark
Gregor Hartmann
Marcel Stör
dnc40085
dnc40085
philip
Johny Mattsson
petur
Nathaniel Wesley Filardo
Luiz Felipe Silva
Frank Exoo
Pawel Jasinski
Konrad Hübner
Luiz Felipe Silva
Carlos Bastos Filho
Lukáš Voborský
Mark Deneen
Suraj151
fetchbot
Johny Mattsson
Metin KOC
tjhowse
Yury Popov