WiFi STA module updated to reflect IDF name changes.
Platform flash and partition api updated to reflect IDF name changes.
Eventually these (and the SPIFFS module) will likely need to be updated
to exclusively work with the esp_partition_xxx() functions in order to
support working with encrypted flash.
Based on his revision 2d290a24a0914be88e5ca4ac7b1018392fe75fe2
(https://github.com/djphoenix/nodemcu-firmware).
All LWIP callback handling changed to use the NodeMCU task interface
to make it usable on RTOS.
IPv4 assumptions have been removed, and this net module /should/ now
be IPv6 ready, but aside from compilation no testing has been done
in this area.
SSL integration points not touched - some work needed there once we
have an mbedTLS module.
node.dsleep() no longer takes options.
node.output() not yet supported (needs syscall registration/chaining support)
Dynamic CPU frequency changing not currently supported in the IDF.
Various chip IDs not currently available/obtainable.
Boot reason completely revamped in ESP32, will need new code.
RTOS driver evicted as it did not play nice with stdio etc.
Implemented a minimal driver to fully support Lua console on UART0. Output
on UART0 done via stdout (provided by the IDF). Input and setup handled
via driver_console/console.c. In addition to the direct input function
console_getc(), the driver also registers in the syscall tables to enable
regular stdio input functions to work (yay!). The Lua VM is still using the
direct interface since it's less overhead, but does also work when going
through stdin/fd 0.
Auto-bauding on the console is not yet functional; revisit when the UART docs
are available.
Module registration/linking/enabling moved over to be Kconfig based. See
updates to base_nodemcu/include/module.h and base_nodemcu/Kconfig for
details.
The sdk-overrides directory/approach is no longer used. The IDF is simply
too different to the old RTOS SDK - we need to adapt our code directly instead.
Everything in app/ is now unused, and will need to be gradually migrated
into components/ though it is probably better to migrate straight from the
latest dev branch.
This fixes the rather unexpected Fatal Exception(9) crashes when executing
something as trivial as "=type(4)". Also ensured the #if/#else structure
will complain loudly next time we port to a new board.
The irom0_flash.bin file gets written to offset 0x40000 in flash. Said file
has the following layout
| irom0 | text | data | rodata | chksum |
...so the previous approach of having a _flash_used_end symbol at the end of
the irom0 section no longer gives us an accurate view of how much of the flash
is used.
New driver is a three-way merger between Espressif's esp8266-rtos-sdk example
driver, Espressif's esp32-rtos-sdk not-example driver, and the previous
NodeMCU driver, plus some general clean-ups.
Basic interactivity is now available on the ESP32!
Running without interrupt vectors not considered all that useful...
Disabled flash-size-byte-setting and SPIFFS formatting on ESP32, for now
at least, as both of these appeared to corrupt the flash and prevent
subsequent boots.
Disabled UART init on ESP32 until the driver gets updated.
This now gets us to a banner on ESP32, but not yet a prompt.
Johny Mattsson
Johny Mattsson