4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
1bc156e4d1
move display constructors into template-based functions
...
+ uniform generaration
+ addition of further displays
- slight unneccesary heap allocation when display drivers are included but not used
2015-07-16 23:23:43 +02:00
02d473dab0
revert local changes to u8glib
2015-07-16 21:31:00 +02:00
dd38a0a0e6
Imported reworked rtctime support.
2015-07-10 16:16:25 +10:00
09410d55c6
Added SNTP module, for easy time sync.
...
Integrates with the rtctime component if it's available.
2015-07-10 15:12:31 +10:00
67e72c45df
Imported RTC FIFO component + added Lua interface.
...
The rtcfifo module uses RTC memory to store sensor samples across deep-sleeps,
making it possible to batch up samples for less frequent uploads. This
component uses 9 RTC memory slots for control, and a variable number of
slots for sample storage (see rtcfifo.prepare() on how to control the
size/location of the latter).
When used together with the rtctime module, it also exposes the convenience
function rtcfifo.dsleep_until_sample() which can be used to easily take
readings on a regular basis without having to manually take into account
time spent awake to get an accurate sleep time.
The format used for storing samples is quite dense, and allows for 16 bits
of data in a fixed point format (per sample).
2015-07-10 15:12:31 +10:00
2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
f5938dfe17
Will made some modules default off.
...
Need discussion. And turn off some modules by default.
May our community should build more version?
2015-07-04 02:51:41 +08:00
485e5a3140
Disabled WS2801 module
2015-07-03 12:35:47 +02:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
dce0d2c2a8
Release build 20150627.
...
fixed ap/station-ap cannot connect to the device.
added wifi.ap.getconfig().
fixed net.dns.getdnsserver().
added new base64 lua example.
added node.bootreason() to inspect boot cause.
optimization of u8g.
2015-06-27 15:21:48 +08:00
7bd10e8a17
Added node.bootreason() to inspect boot cause.
2015-06-27 12:34:03 +10:00
dda121e5e0
Release 0.9.6-dev_20150625
2015-06-26 18:32:46 +08:00
0c924e56c6
Support for loading sub-32 wide data from irom.
2015-06-23 15:41:14 +10:00
af56aea1e8
Update dhtlib api, support both integer and float version.
2015-06-18 17:19:55 +08:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
b0a4e4d3e9
Changed BUILD_DATE.
2015-06-17 00:16:57 +08:00
d955c8815b
add 433MHz transmission
2015-06-11 18:07:16 -04:00
8044014f96
Merge pull request #471 from nodemcu/dev
...
Merge dev into dev096
2015-06-08 14:04:28 +08:00
223a936779
Switched crypto module to use ROM SHA1/MD5.
...
Also disabled MD2 support by default (see MD2_ENABLE in user_config.h).
2015-06-05 12:12:24 +10:00
06724fbb17
Renamed SHA2 support option to SHA2_ENABLE per request.
2015-06-03 11:20:16 +10:00
2128c42f02
Add headers for discovered rom functions
2015-05-28 15:10:12 -05:00
ca78b9ea2c
Add crypto module initially containing sha1 and base64_encode.
2015-05-28 07:46:57 -05:00
c82cc3f7c5
Testing use all modules.
2015-05-21 10:42:28 +08:00
a1e67c5cf0
Try to use latest spiffs but not success.
2015-05-21 10:39:02 +08:00
71469dd70f
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_version.h
app/modules/node.c
app/modules/wifi.c
2015-05-15 08:13:46 +08:00
bcbde08bf7
fix mqtt keepalive ping, add a example for mqtt in lua_examples.
2015-04-05 02:22:51 +08:00
1c2ee75a00
fix mqtt, do a format when wrong flash size is detected
2015-04-03 00:51:02 +08:00
dcb6e53af7
add auto-reconnect option to mqtt:connect api
2015-03-31 00:36:44 +08:00
09750b5653
add queue to mqtt module
2015-03-30 00:24:09 +08:00
d5731dd9bd
merge from dev
2015-03-20 20:15:38 +08:00
a70709268b
merge cjson and dev to master, make a stable release
2015-03-18 14:22:17 +08:00
a01bda03dd
Merge pull request #294 from nodemcu/json
...
Json branch merged to master
2015-03-18 13:11:11 +08:00
09b650be41
disable untested pcd8544 driver for the moment
2015-03-17 20:52:47 +01:00
808a359eb8
quick fix when wide charactor issue
2015-03-17 22:42:22 +08:00
45e7f270cc
Merge branch 'dev' into json
2015-03-17 00:13:15 +08:00
9c0c960e84
json port from cjson. not work yet
2015-03-16 09:00:33 +08:00
3124bcf357
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-15 22:06:30 +01:00
0b01f28c62
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_modules.h
app/include/user_version.h
2015-03-16 01:13:03 +08:00
4e7473bc00
Fixed flash automatic detection bug. Support 128MBit flash.
2015-03-16 01:05:06 +08:00
0b95ae08a2
default build with coap, reduce coap module mem usage
2015-03-15 20:12:29 +08:00
c46000069d
reduce coap module memory usage
2015-03-15 13:44:50 +08:00
429bf57d67
add pcd8544
2015-03-12 23:09:41 +01:00
b387ba93ec
introduce u8g_config.h
2015-03-12 21:50:57 +01:00
d28a2c9eda
add interger version release, fix #234 , #252 , #246
2015-03-11 13:21:19 +08:00
Johny Mattsson
devsaurus
Vowstar
Konrad Beckmann
vowstar
Johny Mattsson
Orgmar
Mike Wen
=
funshine
zeroday