Florian Festi
182d222f01
Prevent not having any sections at all for argparseSections
2019-11-24 19:10:35 +01:00
Florian Festi
d2d97b01c9
grip(): Prevent division by zero
2019-11-24 16:42:47 +01:00
Marius Bergmann
9f8b84b3f1
add parameters for banana socket and flipswitch diameters
2019-11-20 11:57:13 +01:00
Marius Bergmann
2c367562a9
remove commented code
2019-11-20 11:57:13 +01:00
Marius Bergmann
90fdf897a9
formatting: whitespace cleanup
2019-11-20 11:57:13 +01:00
Florian Festi
c67d1f874c
StorageShelf: Add retainer_hole_edge param
...
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi
e8cda89381
StorageShelf: Fix holes for inner vertical walls
2019-11-09 23:31:26 +01:00
Florian Festi
71711baa1a
StorageShelf: Add retainer wall
...
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi
0cdc930459
StorageShelf: Change front edge from E to e
...
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi
923798beb9
SBCMicroRack: Fix dowel diameter
2019-11-07 15:38:16 +01:00
Florian Festi
2860a32360
SBCMicroRack: Comment out unfinished fan parameter
2019-11-07 15:38:16 +01:00
Florian Festi
d9c190073b
SBCMicroRack: Don't draw bottom fingerholes twice
2019-11-07 15:38:16 +01:00
Florian Festi
af6c9be8f7
SBCMicroRack: Rearrange parts
2019-11-07 15:38:16 +01:00
gmorell
569eb2f49c
New generator: SBCMicroRack
2019-11-07 15:37:57 +01:00
Florian Festi
199251ae52
Add lid for StackableEdge (S) as top_edge
2019-11-04 17:13:12 +01:00
Florian Festi
83b5363bc8
StackableEdge: Fix margin for upper (S) variant
2019-11-04 17:05:18 +01:00
Florian Festi
4ac46840d2
NotesHolder: Fix various issues
...
Code for opening == 0.0 was broken (See #187 )
Fixed placement of bottom
Fixed margin of USlotEdge
Resolves : #187
2019-11-04 08:52:26 +01:00
Florian Festi
927f483c19
New generator: LaserHoldfast - A holdfast for honey comb tables
2019-10-19 23:47:44 +02:00
Florian Festi
e2cb90db89
NotesHolder: Split front into two pieces and set better default values
...
Resolves : #129
2019-10-19 21:49:43 +02:00
Florian Festi
b0b35d6084
Mention BurnTest in docs and in the burn parameter description
2019-10-19 12:29:56 +02:00
Florian Festi
cfbcbb065c
Clarify doc string for FingerJointSettings.play
2019-10-19 12:03:57 +02:00
Florian Festi
011024f0a4
TrayLayout: Add comment to clarify the purpose of the classes
...
Resolves : #179
2019-10-18 19:06:07 +02:00
Florian Festi
228335a993
BurnTest: fix part placement
2019-10-13 18:42:40 +02:00
Florian Festi
89ea774a39
New generator: BurnTest
2019-10-13 18:39:06 +02:00
Florian Festi
13ecfc9914
Support springs for finger joints (FingerJointSettings.style)
...
Resolves : #177
2019-10-11 22:32:57 +02:00
Florian Festi
f5ed90ca88
SlatwallWrenchHolder: Add extra_distance parameter for Jonas
2019-10-10 20:00:22 +02:00
Florian Festi
8afdfdf3f5
New generator: BaynonetBox
2019-09-23 23:44:02 +02:00
Florian Festi
877915eb74
Arcade: Make height of monitor and depth of keyboard adjustable
...
Resolves : #166
2019-09-23 21:42:57 +02:00
Florian Festi
d6495fc7b4
DrillBox: Fix font size
...
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.
Resolves : #173
Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
Florian Festi
3ba90c517c
TrayLayout: Fix cli
...
TrayLayout was still trying to produce a drawing and failed. Now TrayLayout is
not using most of the infrastructure and only TrayLayout2 has the capacity to
create a drawing.
Resolves : #172
2019-09-22 22:37:33 +02:00
Florian Festi
b124c96c63
UnevenHeightBox: Use lid and bottom_egde for height calculation
...
when "outside" is set
2019-09-08 23:26:23 +02:00
Florian Festi
657b978aa0
StorageShelf: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
Florian Festi
605692f751
StorageRack: Use top and bottom_egde for height calculation with "outside" set
2019-09-08 23:26:23 +02:00
Florian Festi
5c0cc4d732
SlatwallTypeTray: Remove unused code carried over from TypeTray
2019-09-08 23:26:23 +02:00
Florian Festi
2b0bdde145
SlatwallTypeTray: Adjust height according to bottom_edge if outside selected
2019-09-08 23:26:23 +02:00
Florian Festi
52484b0d55
adjustSize(): add support for edge chars
2019-09-08 23:26:23 +02:00
Guillaume Collic
6c9d23af6e
New generator DividerTray
2019-08-30 21:00:32 +02:00
Florian Festi
c3185f5129
Rename to Rack19HalfWidth to better fit with other Rack boxes
...
Move to Box group
Support more than one row of equipement
Move defaults to arguments to conform with general coding style
2019-08-30 12:27:13 +02:00
Stefan Schwarz
681ebbb694
add h19rack for a ported half 19inch rackmount
2019-08-30 11:58:21 +02:00
Florian Festi
9a17e3efa9
Precompile optimizations REs and fix performance issue
2019-08-22 00:31:45 +02:00
Florian Festi
39bd912c90
Harden Extend.addPoint for None arguments
2019-08-18 14:46:13 +02:00
Florian Festi
9db79243f8
Make Slide-on Lid with pin easier to insert
...
Make slot half a thickness wider and round the corners
Resolves : #156
Thanks to Matthijs Kooijman for suggesting this change!
2019-08-17 00:05:13 +02:00
Florian Festi
0409bcbe65
Fix SVG merging for Inkscape
...
Resolves : #163
2019-08-16 22:37:42 +02:00
Florian Festi
65d2293e25
Fix Extend.__add__ for None values
2019-08-15 23:12:35 +02:00
Florian Festi
02988d12c5
Catch exceptions from failed ps2edit calls
2019-08-15 23:12:35 +02:00
Florian Festi
c81d23e605
SlatwallDrillBox: Fix all kind of errors
2019-08-15 23:12:35 +02:00
Florian Festi
e4bdc190bb
Flexbox3: Fix lid length
2019-08-08 22:53:08 +02:00
Florian Festi
73422b0faf
Fix name space handling in new svg code
2019-07-31 23:40:48 +02:00
Florian Festi
6a3a9b984a
SlatwallTypetray: Fix side joints of front wall (F -> f)
2019-07-31 23:40:06 +02:00
Matthijs Kooijman
8ecf04cbe8
Fix handling of space in LidSideRight/Left
...
Previously, the extra space was added above the first pin and below the
(optional) second pin. This would cause the lid to misalign with the
holes in the back wall, making it harder to close the lid.
With this commit, the extra space is divided evenly above and below the
nominal position of the pin.
For this to work, the startwidth (or endwidth, depending on the side) is
slightly adjusted (since the start of the first pin slot is actually
generated by the adjacent edge). This moves the starting point, so the
location of the spring hole is adjusted to compensate for that.
2019-07-27 13:30:06 +02:00