5fae61bd0d
Fix typos and docstrings
2023-01-02 16:15:13 +01:00
4d41b2ddb1
FingerHolesEdge: Add bottom_lip parameter
...
to support boxes that stack on top of each other like milk crates
2023-01-02 13:00:07 +01:00
b5d10334d0
StackableEdge: Add bottom_stabilizers parameter
...
to generate strips to be glued to the inside of bottom edges
2023-01-02 13:00:07 +01:00
9d6f535e01
Fix typing errors
2023-01-01 18:10:42 +01:00
1875742b8d
polygonWall: Take all edge type into account
...
when calculating the extent of the polygon. This is a less than ideal,
worst case estimate. Should be replaced by something a bit smarter that
only looks at the current edge and the space it needs.
2023-01-01 15:26:07 +01:00
420550b2c4
DisplayShelf: Implement back and slope
2023-01-01 15:14:44 +01:00
ad38bb1eaf
Auto optimize imports
...
* Remove unused
* Rearrange imports (module > partial > project)
2022-12-31 20:33:49 +01:00
20032e50be
Remove outdated imports
2022-12-31 20:33:49 +01:00
508dd0f030
Change SVG encoding
...
Change from default 'us-ascii' to universal 'utf-8'.
2022-12-30 16:44:05 +01:00
1d6efb5371
Fix comparison with None and equality operator
2022-12-29 12:02:33 +01:00
4ffad120b5
Remove unnecessary backslash
2022-12-29 12:02:33 +01:00
03879258e8
Remove trailing semicolon
2022-12-29 12:02:33 +01:00
5f9f704869
Remove deprecated `cElementTree`
...
Deprecated since version 3.3: The xml.etree.cElementTree module is deprecated.
2022-12-29 12:02:33 +01:00
2e98f0fee0
Remove Python 2.7 coding hint
2022-12-29 12:02:33 +01:00
6162383de1
Update edges.py
2022-12-25 18:08:59 +01:00
9729ca6d0f
HingeBox: Add assembly instructions
...
Resolves : #442
2022-12-25 16:48:00 +01:00
7a0dd3ebdf
flangedWall: Fix placement of finger holes
...
for walls with other width than t
2022-12-21 22:38:06 +01:00
814405f0be
DisplayShelf: Fix shelf placement for negative angles
...
Resolves : #463
2022-12-06 20:12:02 +01:00
fe28b7454e
Add edges to polygonWall
2022-12-06 18:12:21 +01:00
a69b1da78f
Whitespace cleanup
2022-12-06 18:12:21 +01:00
6ab0cef413
Use straight edge for slots SlottedEdge
...
Used the connecting edge due to an aliasing issue. This broke as the
FingerJointEdge now places fingers even for smaller lengths.
Thanks to Nic Jansma (https://github.com/nicjansma ) for reporting!
Resolves : #452
2022-11-12 09:17:56 +01:00
0c87b43b52
FrenchCleats: Make top and bottom section small
...
enough to not have finger holes in them. With the new changes to
FingerJoints fingers can now fit into much smaller edges and here that
only weakens the connection between left and right of the edge.
2022-10-02 11:29:07 +02:00
c4b0971d03
topEdges: Give better names to variables
2022-10-01 13:35:51 +02:00
3a06aa1d62
DocText for topEdges
2022-10-01 13:35:51 +02:00
a7fb562306
TypeTray: Rename top edge variables
...
to something more meaningful
2022-10-01 13:35:51 +02:00
6109c6570a
TypeTray: Add labels and move grip hole to front
2022-10-01 13:35:51 +02:00
9dd211d792
DividerTray: Add dividers with asymetric tabs
...
Related: #438
2022-10-01 10:56:24 +02:00
77b1e1b4ce
DividerTray: Close last corner of the dividers
...
There was just one corner missing.
Related: #438
2022-10-01 10:20:45 +02:00
9c253a3525
New generator: HalfBox
...
Configurable half of a box which can be: a bookend, a hanging shelf, an angle clamping jig, ...
ready for pull request
2022-09-30 19:28:01 +02:00
d782eb281c
FingerJointEdges: Better deal with short edges
...
Shrink surroundingspaces when need to still fit at least one finger. If
even one regular finger won't fit use a small rectangular style finger.
This is a bit hacky as the same logic is copied in both
FingerJointEdge and FingerHoles
2022-09-30 19:28:01 +02:00
93a4cad4f4
fixed edge ordering for topEdges() function
2022-09-24 08:36:00 +02:00
f57ba7fdb8
fixed labels
2022-09-24 08:36:00 +02:00
2086eac5e6
DividerTray, Typetray: Add handle parameter
2022-09-24 08:36:00 +02:00
bfaabc2619
Add HandleEdge
2022-09-24 08:36:00 +02:00
4401a096ec
New generator: BreadBox
...
Related: #431
2022-09-23 21:09:35 +02:00
41ecd619cc
DividerTray: Add dividers with half width tabs
...
This allows having dividers side by side.
Resolves : #436
2022-09-23 17:06:13 +02:00
55e56d963c
KeyPad: Add description
...
pointing to different material thickness for the top layer(s)
Related: #435
2022-09-22 20:04:56 +02:00
4008c2b967
SlatWallEdges: Add parameters for hook heights
...
and make lengths and margin dependent of the parameters
Related: #434
2022-09-22 19:44:06 +02:00
93a4fad7a1
Planetary2: Move to Unstable as it is not yet working properly
...
The middle gear set can't fulfill the planetary gear set condition
(ring = sun + 2 * planets)
May have more issues.
Resolves : #417
2022-09-18 01:18:49 +02:00
33ede5eef7
New generator: CoinDisplay
...
Resolves : #426
2022-09-18 00:58:00 +02:00
1593331194
SlatWallSettings: Add hook_distance parameter
...
Resolves : #434
2022-09-18 00:47:25 +02:00
691f3f440e
Add aria labels to inputs
...
to make them accessible for screen reader users.
Assign ids to the tds containing the setting name and description and
then use them as the label via the aria-labeledby attribute.
2022-09-08 09:00:04 +02:00
43bd7d12d3
New generator: CanStorage
...
A dispenser for cylindrical objects like cans or batteries.
2022-09-08 08:41:08 +02:00
4483e483f7
Fix white space in boxes/extents.py
...
now that we mess up the history anyway.
2022-09-06 18:54:44 +02:00
7f1249cb67
Create .gitattributes
...
And set Pyhton and text files to Unix style end of lines (lf)
Convert boxes/extents.py which was still on DOS style new lines.
2022-09-06 18:52:06 +02:00
cd4949ccac
Only draw snap finger joint for wide fingers
...
and use rectangular fingers if width is smaller than 1.9
2022-08-20 09:03:21 +02:00
87cf8fedbf
DiceBox: Add image and move to Boxes group
...
Related: #419
2022-08-19 23:28:41 +02:00
9e6c0ab604
Add dicebox generator
2022-08-18 00:08:20 +02:00
a41ffd6905
Add option for finger joints on the base and lid of hinged chests
2022-08-18 00:08:20 +02:00
3572feab41
Update regularPolygonHole to support rounded corners
2022-08-18 00:08:20 +02:00
dcff72bb47
Fix barbs and spring finger joint types
...
broken in 13170f0306https://github.com/tinohager ) for reporting!
Resolves : #420
2022-08-13 11:43:02 +02:00
59a6ea549d
LaptopStand: Improve part placement
...
and add support for move parameter
2022-08-12 16:00:09 +02:00
46032482b8
Laptop-stand: create generator
2022-08-12 16:00:09 +02:00
d6faf5be3e
rectangularWall: Fix placement for ignore_widths 6
...
we need to move for the edge margin every time. Otherwise the edge will
stick out.
2022-08-08 21:50:47 +02:00
00ab597773
DividerTray: Add Labels
2022-08-04 22:05:07 +02:00
99cc13b367
New generator: RegularStarBox
...
Box made from two regular polygon pieces that go together to form a star.
2022-08-03 20:44:52 +02:00
9cadd12635
changed font color to ETCHING,
...
changed font size to depend on tile size
2022-07-31 16:27:13 +02:00
05fc5aab32
New Generator: CardHolder
...
Resolves : #279
2022-07-31 00:28:13 +02:00
fc64f03eed
WallDrillBox: Move to WallMounted group
...
Force manually to fix inheritance mess
2022-07-30 20:11:21 +02:00
d1bb098540
WallEdges: French Cleats
...
Resolves : #366
2022-07-30 18:24:00 +02:00
be68061b17
DrillBox: Extend finger joints on sides to whole height
2022-07-28 22:33:33 +02:00
8076566616
DrillBox: Add support for top_edge parameter
...
with limited selection of edge types (compared to UniversalBox)
Resolves : #416
2022-07-28 22:27:48 +02:00
db1ca9e505
MountingEdge: Fix typo and default
...
for side to "back"
2022-07-28 22:26:55 +02:00
fef38c0b27
Remove HexHoles generator
...
as it is superseeded by the HolePattern generator which does more and
does better.
2022-07-24 10:57:56 +02:00
a83497758c
New generator: HolePattern
...
using the new fillHoles function.
Resolves : #31
Related: #400
2022-07-24 10:55:11 +02:00
e4c8566ce6
New generator: FillTest
...
for debugging only - just to have consistent test cases for runtime measurements
2022-07-23 09:56:25 +02:00
5169343be7
Add fillHoles() function
...
to fill a polygon with a hole pattern
2022-07-23 09:53:11 +02:00
3793a2bb09
Add regularPolygonHole()
...
to be used by fillHoles
2022-07-23 09:44:20 +02:00
4a5aee7ad7
BirdHouse: Fix the gable walls
...
Looks like edgeCorner() still doesn't work properly with angles < 90°.
Avoid issue by switching to f edges that don't need width adjustments.
Also make the roof wider
Related: #414
2022-07-19 09:27:17 +02:00
20ab2a1bed
flangedWall: Do inger holes for h edge
...
if there is a flange at that side
2022-07-19 09:25:17 +02:00
0938d12aa0
BirdHouse: Fix collision between roof and sides
...
and hole sizes in the fronts
2022-07-19 00:22:03 +02:00
777e79afc1
New generator: BirdHouse
...
Still untested
2022-07-18 22:30:53 +02:00
574f72e6e4
DividerTray: Fix height if "outside" and "bottom" is selected
...
Thanks to https://github.com/nialabert for reporting!
Resolves : #413
2022-07-12 22:13:19 +02:00
bf84ee1e73
Create slidingdrawer.py
2022-07-09 21:32:30 +02:00
13170f0306
FingerJoints: Move drawing fingers into function
...
so it can be reused by sub classes
2022-06-28 08:35:00 +02:00
c70eecd1d1
Convert given default values to proper type
...
for when converting Settings to parseargs to void the type changing by
careless new default values.
2022-06-28 08:35:00 +02:00
fd30b8b0b7
Only merge paths with the same color and width
...
Related: #353
2022-06-28 08:35:00 +02:00
73a46460ee
Platonic: Add image of Icosahedron
...
Thanks to https://github.com/YodaMaster18 for the image!
Resolves : #409
2022-06-26 16:46:41 +02:00
277e0f2c38
Rename WallMountedBox to _WallMountedBox
...
as it is an abstract class and should not appear in the list of generators.
Thanks to https://github.com/HaSHsss for reporting!
Resolves : #408
2022-06-22 22:50:57 +02:00
ad056de77f
OttoSoles: Make soles a little bit larger by default
2022-06-22 22:42:31 +02:00
e414e73bf2
RoundedTriangleEdge: Reduce default height to 50
...
Avoid height of several generators becoming negative if
RoundedTriangleEdge is selceted with default values e.g. for
UniversalBox and TypeTray. These are only 100mm hight with outside
option being enabled.
Thanks to https://github.com/SuksAE , https://github.com/HaSHsss and
https://github.com/Arcturuss for pushing this issue.
Resolves : #406
Resolves : #305
2022-06-20 08:10:07 +02:00
52ec9af104
WallDrillBox: Fix inheritance mess
2022-06-10 23:32:32 +02:00
17e527484f
DinRailBox: Move to WallMounted group
...
and improve placement and labels
2022-06-10 23:10:04 +02:00
0a32f8ed07
WallEdges: Improve char placement
2022-06-10 23:01:54 +02:00
7d7e0a5c9f
Move all Slatwall generators to new WallEdges infrastructure
...
Add "plain" and "plain reenforced" wall styles with straight back
2022-06-10 23:01:54 +02:00
362dd54e09
Move Slatwall classes to walledges
2022-06-10 23:01:54 +02:00
bfa327d83a
Don't try to add closed loops to other paths
...
This is too slow for hole patterns and the holes can't be added anywhere
anyway.
2022-06-07 08:51:25 +02:00
c289758749
CabinetHingeEdge: Fix spurious 270° corner
...
Resolves : #404 - Issue not found
2022-06-06 19:58:00 +02:00
2f59c6191b
fixed debug rectangle to be painted with ANNOTATIONS color
2022-06-05 22:37:00 +02:00
ce032e323f
reworked color handling to improve mapping with Lightburn layers
2022-06-05 12:18:51 +02:00
b864cfcd56
Fix MagazineFile for e as top_edge
2022-05-27 22:58:17 +02:00
af8a30287e
Add burn value to reference text
2022-05-27 15:16:50 +02:00
ec0d24efd2
Fix svg text alignment for "middle"
...
See https://stackoverflow.com/questions/19212498/firefox-support-for-alignment-baseline-property/21373135#21373135
2022-05-27 15:05:37 +02:00
4a339a31db
White space in comments
2022-05-27 14:53:40 +02:00
ee9fb4d7fe
TrafficLight: Add label
2022-05-27 14:53:40 +02:00
7f67bae793
MagazineFile: Add MountingEdge
2022-05-27 14:53:40 +02:00
20f45224fb
Add MountingEdge
...
and add it to top_edge.
2022-05-27 14:53:40 +02:00
e6ef17c070
Quote -- everywhere in the SVG/XML comment
...
by adding spaces inbetween. Double replace to deal with multiple dashes
in as row. Otherwise a space would be added only every second gap due to
overlapping replacements.
2022-05-15 16:06:24 +02:00
363b474b46
Add parameter "hole_dD" to .buildArgParser()
2022-05-15 10:23:14 +02:00
1bb4b8c0c3
Added pear shaped mounting hole drawing function ( #392 )
...
and add them to BinTray and TrafficLight
Add labels to the parts of these generators
Add doc strings to all hole types
2022-05-15 07:55:53 +02:00
Rotzbua
Florian Festi
ranthalion
Alex Shargalin
suks.ae
Electro707
funkonaut
Tino Hager
Erik Snider
Daniel
HaSHsss
SuksAE