ec9d911142
DividerTray: Use ValueError instead of assert to treat this as wrong user input
2020-02-01 15:17:18 +01:00
069dd853aa
BinTray: limit front parameter
2020-02-01 15:14:12 +01:00
95f2fbeb82
corner(): Make more robust against division by zero
2020-02-01 15:03:49 +01:00
2121228036
TrayLayout: Error out if tray is just a single wall
2020-02-01 14:51:38 +01:00
f8401aac75
rectangularRectangle: Make angle calculation more robust
2020-02-01 14:43:45 +01:00
2a7e1e62d1
PaintStorage: Prevent division by zero
2020-02-01 14:31:24 +01:00
dd0f2d748c
ChestHingeSettings: check pin_height for minimal size
2020-02-01 14:27:17 +01:00
0f3eb5b21a
StackableSettings: check angle for invalid values
2020-02-01 14:16:26 +01:00
9706816fe4
gears: prevent division by zero
2020-02-01 13:59:30 +01:00
37bff9d358
fixed d3 diameter (mounting screw holes)
2020-01-22 16:11:18 +01:00
1f3110c6fa
New generator: TriangleLamp
2020-01-21 21:34:02 +01:00
10e2085eef
Remove Python 2 compat foo
2019-12-21 17:47:54 +01:00
4d53bd17cc
partsMatrix: support width=0 for all parts in one row
2019-12-16 20:07:30 +01:00
e2b87af2a4
UniversalBox: Add outside parameter
...
Fixes : #144
2019-12-14 19:13:40 +01:00
aba9631b00
Make joints of box sides go to the very bottom
...
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter
Resolves : #111
2019-12-14 14:18:38 +01:00
8cb5a8e042
Check values of flex settings
2019-12-14 13:09:43 +01:00
fe9555a79f
checkValues
2019-12-14 13:09:43 +01:00
c5474e7488
DiscRack: Limit lower_factor and rear_factor to smaller than one
2019-12-14 12:23:08 +01:00
024b574763
TrayLayout: Add default for layout param
2019-12-14 12:14:24 +01:00
093e10a3ac
AngledBox: Use FingerJointSettings for vertical edges, too
2019-12-06 23:37:22 +01:00
bd1db150c7
New geneator: SpicesRack
2019-11-29 19:58:27 +01:00
182d222f01
Prevent not having any sections at all for argparseSections
2019-11-24 19:10:35 +01:00
d2d97b01c9
grip(): Prevent division by zero
2019-11-24 16:42:47 +01:00
9f8b84b3f1
add parameters for banana socket and flipswitch diameters
2019-11-20 11:57:13 +01:00
2c367562a9
remove commented code
2019-11-20 11:57:13 +01:00
90fdf897a9
formatting: whitespace cleanup
2019-11-20 11:57:13 +01:00
c67d1f874c
StorageShelf: Add retainer_hole_edge param
...
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
e8cda89381
StorageShelf: Fix holes for inner vertical walls
2019-11-09 23:31:26 +01:00
71711baa1a
StorageShelf: Add retainer wall
...
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
0cdc930459
StorageShelf: Change front edge from E to e
...
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
923798beb9
SBCMicroRack: Fix dowel diameter
2019-11-07 15:38:16 +01:00
2860a32360
SBCMicroRack: Comment out unfinished fan parameter
2019-11-07 15:38:16 +01:00
d9c190073b
SBCMicroRack: Don't draw bottom fingerholes twice
2019-11-07 15:38:16 +01:00
af6c9be8f7
SBCMicroRack: Rearrange parts
2019-11-07 15:38:16 +01:00
569eb2f49c
New generator: SBCMicroRack
2019-11-07 15:37:57 +01:00
199251ae52
Add lid for StackableEdge (S) as top_edge
2019-11-04 17:13:12 +01:00
83b5363bc8
StackableEdge: Fix margin for upper (S) variant
2019-11-04 17:05:18 +01:00
4ac46840d2
NotesHolder: Fix various issues
...
Code for opening == 0.0 was broken (See #187 )
Fixed placement of bottom
Fixed margin of USlotEdge
Resolves : #187
2019-11-04 08:52:26 +01:00
927f483c19
New generator: LaserHoldfast - A holdfast for honey comb tables
2019-10-19 23:47:44 +02:00
e2cb90db89
NotesHolder: Split front into two pieces and set better default values
...
Resolves : #129
2019-10-19 21:49:43 +02:00
b0b35d6084
Mention BurnTest in docs and in the burn parameter description
2019-10-19 12:29:56 +02:00
cfbcbb065c
Clarify doc string for FingerJointSettings.play
2019-10-19 12:03:57 +02:00
011024f0a4
TrayLayout: Add comment to clarify the purpose of the classes
...
Resolves : #179
2019-10-18 19:06:07 +02:00
228335a993
BurnTest: fix part placement
2019-10-13 18:42:40 +02:00
89ea774a39
New generator: BurnTest
2019-10-13 18:39:06 +02:00
13ecfc9914
Support springs for finger joints (FingerJointSettings.style)
...
Resolves : #177
2019-10-11 22:32:57 +02:00
f5ed90ca88
SlatwallWrenchHolder: Add extra_distance parameter for Jonas
2019-10-10 20:00:22 +02:00
8afdfdf3f5
New generator: BaynonetBox
2019-09-23 23:44:02 +02:00
877915eb74
Arcade: Make height of monitor and depth of keyboard adjustable
...
Resolves : #166
2019-09-23 21:42:57 +02:00
d6495fc7b4
DrillBox: Fix font size
...
Now that the text() function has a fontsize parameter, setting the font size
on ctx before calling text() has no impact.
Resolves : #173
Thanks to Marko Luther for reporting and suggesting this fix!
2019-09-23 12:15:49 +02:00
Florian Festi
Stefan Reichhard
Marius Bergmann
gmorell