boxespy/boxes/generators
Norbert Szulc b0861bf937
Add platonic solid generator
Resolves: #254
2021-05-16 15:07:53 +02:00
..
__init__.py Add new Hole Patterns group 2020-08-04 19:33:10 +02:00
_swtemplate.py Add boxes/generators/_swtemplate.py as a starting point for Slat Wall boxes 2019-06-13 19:02:02 +02:00
_template.py Remove no longer needed line in _template.py 2019-07-18 20:55:07 +02:00
agricolainsert.py AgricolaInsert: better thickness range support 2020-11-16 22:46:43 +01:00
alledges.py AllEdges: Fix for new backend 2020-11-09 19:15:55 +01:00
angledbox.py AngledBox: Add bottom_edge parameter 2020-06-03 21:56:55 +02:00
angledcutjig.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
arcade.py Arcade: Make height of monitor and depth of keyboard adjustable 2019-09-23 21:42:57 +02:00
atreus21.py Keyboard: clean and column callback spacing default value 2021-02-27 21:02:07 +01:00
basedbox.py mentioned ClosedBox and BasedBox in each other descriptions 2021-03-20 21:26:54 +01:00
bayonetbox.py Add alignment pins to BayonetBox 2020-10-13 16:07:31 +02:00
bintray.py BinTray: limit front parameter 2020-02-01 15:14:12 +01:00
bottlestack.py New generator: BottleStack 2020-02-29 18:19:59 +01:00
burntest.py mention similar ones in burn test 2021-03-22 19:45:06 +01:00
cardbox.py CardBox: Fix typo 2020-05-27 17:27:23 +02:00
castle.py Castle: Actually add description 2020-12-29 15:18:37 +01:00
closedbox.py mentioned ClosedBox and BasedBox in each other descriptions 2021-03-20 21:26:54 +01:00
coffeecapsulesholder.py Add coffee capsule holder generator 2021-04-25 11:25:30 +02:00
concaveknob.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
console.py Console: Fix for front_height == 0 2020-07-23 16:19:56 +02:00
console2.py Console and Console2: Add outside parameter 2020-07-23 16:13:59 +02:00
dinrailbox.py New generator: DinRailBox 2020-05-29 22:59:15 +02:00
discrack.py DiscRack: Limit lower_factor and rear_factor to smaller than one 2019-12-14 12:23:08 +01:00
display.py Fix use of roundedPlate in Display and LaserClamp 2020-10-13 20:00:09 +02:00
displaycase.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
displayshelf.py DisplayShelf: Fix calculations for negative angle values 2021-04-02 16:11:11 +02:00
dividertray.py Fix DividerTray length with 'outside=false' 2021-02-14 10:20:16 +01:00
drillbox.py DrillBox: Fix font size 2019-09-23 12:15:49 +02:00
drillstand.py New generator: DrillStand 2021-05-15 15:45:25 +02:00
edges.py Edges generator for printing the registerd Edge types 2017-05-20 20:41:51 +02:00
electronicsbox.py fixed d3 diameter (mounting screw holes) 2020-01-22 16:11:18 +01:00
eurorackskiff.py Rail holes dist (#213) 2020-03-05 23:09:03 +01:00
fanhole.py New generator: FanHole 2020-08-04 19:33:11 +02:00
flexbox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
flexbox2.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
flexbox3.py Flexbox3: Fix lid length 2019-08-08 22:53:08 +02:00
flexbox4.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
flexbox5.py New generator: FlexBox5 2019-07-12 00:24:50 +02:00
flextest.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
flextest2.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
folder.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
gear.py Gear: don't allow less than 2 teeth 2020-02-01 15:30:53 +01:00
gearbox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
heart.py New generator: HeartBox 2019-03-24 21:52:26 +01:00
hexholes.py New generator HexHoles 2020-08-04 19:33:11 +02:00
hingebox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
hooks.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
integratedhingebox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
jigsaw.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
keyboard.py Keyboard: 19.05 mm spacing is more standard than 19 2021-02-27 21:02:07 +01:00
keypad.py Keyboard: add shared settings with new options 2021-02-27 21:02:07 +01:00
lamp.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
laserclamp.py Fix use of roundedPlate in Display and LaserClamp 2020-10-13 20:00:09 +02:00
laserholdfast.py New generator: LaserHoldfast - A holdfast for honey comb tables 2019-10-19 23:47:44 +02:00
lbeam.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
magazinefile.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
makitapowersupply.py MakitaPowerSupply: Dynamically calculate vent holes 2020-11-10 18:00:40 +01:00
microrack.py SBCMicroRack: Fix dowel diameter 2019-11-07 15:38:16 +01:00
nemamount.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
nemapattern.py New generator: NemaPattern 2020-08-04 19:33:11 +02:00
notesholder.py Make joints of box sides go to the very bottom 2019-12-14 14:18:38 +01:00
openbox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
organpipe.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
ottobody.py OttoBody: Fix issue with HexHoles that broke the generator 2020-10-19 21:00:38 +02:00
ottolegs.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
ottosoles.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
paintbox.py Extend PaintStorage to make stackable drawers 2021-05-16 14:58:18 +02:00
paperbox.py Add PaperBox 2021-01-28 13:59:47 +01:00
phoneholder.py Add PhoneHolder 2021-03-22 22:45:55 +01:00
planetary.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
planetary2.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
platonic.py Add platonic solid generator 2021-05-16 15:07:53 +02:00
polehook.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
pulley.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
rack10box.py Add 10" rack box derived from 19" rack box 2018-06-27 21:48:35 +02:00
rack19box.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
rack19halfwidth.py Rename to Rack19HalfWidth to better fit with other Rack boxes 2019-08-30 12:27:13 +02:00
rackbox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
rectangularWall.py RectangularWall: Fix list of available edge types 2020-08-04 23:41:08 +02:00
regularbox.py Add alignment pins to BayonetBox 2020-10-13 16:07:31 +02:00
robotarm.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
rotary.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
roundedbox.py Implementation of FlexSettings 2020-12-29 22:29:27 +01:00
royalgame.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
shutterbox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
sidedoorhousing.py New generator: SideDoorHousing 2020-05-12 21:54:59 +02:00
silverwarebox.py SilverwareBox: Add missing stroke() command 2020-10-20 17:00:15 +02:00
slatwall.py Add SlatWallHoleEdge (dD) classes 2019-06-21 18:47:29 +02:00
slatwallcaliperholder.py New generator: SlatWallCaliperHolder 2019-06-30 15:48:09 +02:00
slatwallconsole.py Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
slatwalldrillbox.py SlatwallDrillBox: Fix all kind of errors 2019-08-15 23:12:35 +02:00
slatwallpinrow.py New generator: SlatwalPinRow 2021-05-15 15:45:44 +02:00
slatwallplaneholder.py New generator: SlatwallPlaneHolder 2019-07-04 22:39:34 +02:00
slatwallpliersholder.py Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
slatwallslottedholder.py Rename remaining Slatwall generators from Sw* to Slatwall* 2019-07-04 22:59:32 +02:00
slatwalltypetray.py SlatwallTypeTray: Remove unused code carried over from TypeTray 2019-09-08 23:26:23 +02:00
slatwallwrenchholder.py SlatwallWrenchHolder: Add extra_distance parameter for Jonas 2019-10-10 20:00:22 +02:00
slotwallchiselholder.py New generator: SlatWallChiselHolder 2019-06-30 17:19:02 +02:00
spicesrack.py SpicesRack: Fix feet to support first level 2020-10-13 22:49:19 +02:00
stachel.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
storagerack.py StorageRack: Add pictures 2020-12-29 15:33:27 +01:00
storageshelf.py Add h edge to top_edge parameter 2020-09-19 22:39:30 +02:00
trafficlight.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
trayinsert.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
traylayout.py TrayLayout: Give more descriptive parse errors 2021-03-15 13:50:35 +01:00
trianglelamp.py TriangleLamp: Fix hole position in front 2020-06-16 22:56:01 +02:00
two_piece.py increase play in two piece to 0.15 2021-03-17 15:24:46 +01:00
typetray.py Add h edge to top_edge parameter 2020-09-19 22:39:30 +02:00
ubox.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00
unevenheightbox.py Adding Grooved Edge (z, Z), example use in UnevenHeightBox 2020-09-29 20:40:18 +02:00
universalbox.py UniversalBox: Add vertical_edges parameter 2020-08-04 21:52:25 +02:00
waivyknob.py serraded -> serrated typo 2021-03-22 19:41:33 +01:00
winerack.py Remove .open() call from the .render() method 2019-02-08 17:43:15 +01:00