dabfe83a7d
Unbreak build from #735 merge.
...
Now with more #ifdef.
2015-11-10 18:48:39 +11:00
27eed629e7
Remove adc.readvdd33() limitation.
2015-11-10 15:30:59 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
cfae4cdc4e
Merge pull request #735 from karrots/mqtt_close_disconnect
...
mqtt:close() send the DISCONNECT message (fix #673 )
2015-11-10 12:08:16 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
c2f12a3b05
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-08 22:45:12 +01:00
b2167bdf3a
mqtt:close() send the DISCONNECT message ( fix #673 )
2015-11-06 07:32:04 -07:00
51046fd78b
Minor change to wifi.sleep
...
Remove unnecessary code
2015-11-06 05:10:24 -08:00
c39d317b2b
Fix mqtt connection closing when not publishing ( fixes #359 )
...
should not reset keep_alive_tick when receiving as this can prevent
sending keepalive (PINGREQ), which can result in server disconnect.
2015-11-05 20:21:53 -07:00
5d28de8595
Merge pull request #722 from TerryE/luac-cross.2
...
Moving luac cross from master to dev
2015-11-06 09:49:38 +11:00
5e95f48a55
Update function wifi.sleep to return any error codes to user
2015-11-05 13:51:42 -08:00
f82415f6b9
Fix to do TCP port number randomization at boot.
...
This addresses the issue where a server would otherwise reject a valid
connection attempt from a rebooted node, due to the server thinking that
packet belonged to a recently closed session. By starting off the local
TCP port numbers at random* points each boot the risk of port reuse
across a reboot is significantly reduced.
*) As random as can be had via the lower 12 bits of the ccounter.
2015-11-05 14:40:57 +11:00
3da57dc85c
Merge pull request #725 from dnc40085/dev_wifi_toggle
...
Add function wifi.sleep
2015-11-05 10:07:32 +08:00
75849f79ab
Fix compiler warning in tmr.c
...
Fix compiler warning: implicit declaration of function 'system_soft_wdt_feed'
2015-11-04 17:55:09 -08:00
91ba22a49d
Minor change
...
Added static keyword to a variable
2015-11-04 06:37:57 -08:00
d6cc6d3e68
added wifi table entry for NULLMODE
2015-11-03 18:06:41 -08:00
5c1c51642e
Fix newly introduced incorrect WDT feeding.
2015-11-04 12:46:37 +11:00
4387f90339
Added function wifi.sleep
2015-11-03 17:23:43 -08:00
0beee5c1ae
Minor tweaks to luac.cross for SDK 1.4 support
...
plus Add extra logic to handle different loci path in luac.cross
for handling 32 bit or great hex integers Also add a helpfull hint in the
build tool to point out the Lua and lfs depencencies.
2015-11-03 22:45:43 +00:00
307323d1ff
Add luac.cross capability to nodeMCU
2015-11-03 21:37:14 +00:00
a08626d84f
Add minimum debug library providing traceback() and getregistry() functions
2015-11-03 21:34:42 +00:00
e2dd98ba10
Update mqtt.c fix for #679
...
Patch for "mqtt LWT qos and retain parameters are parsed incorrectly #679"
2015-11-02 20:14:43 -07:00
95e2bbb0f0
Merge pull request #688 from karrots/mqtt-puback-fix
...
Fix for MQTT PUBACK loop
2015-11-01 14:34:12 +08:00
a38fbdbf51
Merge pull request #713 from christakahashi/hx711-support
...
Added support for the hx711 load cell ADC.
2015-11-01 14:31:12 +08:00
3e0a3e992e
Merge pull request #717 from karrots/feature/baudrate_define
...
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-11-01 14:30:57 +08:00
66e65bd3c1
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-10-31 19:47:11 -06:00
dffbfacd46
most users won't need this so it should be off be default
2015-10-30 23:31:45 -07:00
57c2e6eacd
Fix for MQTT PUBACK loop
...
Conflicts:
app/modules/mqtt.c
2015-10-29 20:02:08 -06:00
52d6be5299
Merge pull request #705 from devsaurus/dev-fdplx
...
Update full-duplex for SPI module
2015-10-28 23:36:39 +01:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
38b494c07e
Merge pull request #702 from devsaurus/dev-fdplx
...
Add full-duplex support to SPI module
2015-10-27 14:34:13 +08:00
b535be7ab8
Fix WDT resets during file.format().
...
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
2015-10-27 14:33:22 +11:00
0ba0370b87
fix construction of table
2015-10-26 22:40:11 +01:00
d46bc5cc1f
align spi_recv to platform_spi_send_recv
2015-10-26 22:39:33 +01:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
c223ecfe5f
Merge pull request #693 from devsaurus/dev-hspi_apiext
...
Extend SPI module API with improved transaction handling
2015-10-21 22:33:08 +02:00
75488639eb
make spi.send() transparent for 32 bit data
...
accept negative values as u32
2015-10-19 23:01:59 +02:00
7ac9a46c40
support secure connection based on CLIENT_SSL_ENABLE
2015-10-18 23:04:40 +02:00
a6eb5ccb80
improved default handling of clock_div and databit length
2015-10-18 11:37:17 +02:00
26f4bc7957
ensure backwards compatibility of exising api functions
2015-10-18 11:13:57 +02:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
28a04cc9c1
remove obsoleted constants for databit length
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
5ab8de34e7
Fix adc.readvdd33
...
Replace undocumented readvdd33 function with SDK function system_get_vdd33
2015-10-17 15:47:17 +02:00
340ef8fc0a
Merge pull request #636 from karrots/mqtt-clean-session
...
Added mqtt clean session support.
2015-10-17 20:58:06 +08:00
8fba0f47de
Make UDP server work again after 1.4.0 API changes.
2015-10-15 12:14:27 +11:00
afdd9430e0
Removed old lwip include file.
2015-10-12 15:57:24 +11:00
f54264669b
Fixed includes after LWIP 1.4.0 upgrade.
2015-10-12 14:31:52 +11:00
5d5be35633
Upgraded LWIP to 1.4.0 released from Espressif.
...
Plus directly provided patch for user_interface.h.
2015-10-12 14:31:04 +11:00
711d464a2b
Re-enabled open source LWIP.
2015-10-12 13:26:05 +11:00
a161f882ae
Espressif-provided fix for open source LWIP on 1.4.0.
2015-10-12 13:26:05 +11:00
dec159bce1
Support for fixing the filesystem location.
...
To assist with testing new SDK.
2015-10-12 13:26:05 +11:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
fe6289a6c2
Switch Lua input to event driven instead of polled.
...
The Lua input timer has been the thorn in the side which prevents a lot of
potential sleeping, unnecessarily.
2015-10-12 13:26:05 +11:00
67a711931a
Switch to SDK LWIP until issues with the open one can be resolved.
2015-10-12 13:26:05 +11:00
e905c24dcc
Removed unsused, now incompatible SSL code.
2015-10-12 13:26:05 +11:00
21c4e11020
Enable dynamic build dates, plus print SDK version.
2015-10-12 13:26:05 +11:00
30380f6cff
Further cleanup of ld directory.
...
Renamed the main linker script to make it clear it is customised for NodeMCU
and not to be confused with the standard linker SDK linker scripts.
Changed to using the eagle.rom.addr.v6.ld file from the SDK.
2015-10-12 13:26:04 +11:00
7d0b13df81
Bumped version string to stop confusing myself.
2015-10-12 13:26:04 +11:00
8bdde6e28d
Sorted out linker scripts & options.
...
Now boots to Lua prompt, but promptly reboots itself before input.
2015-10-12 13:26:04 +11:00
91ee5c088c
Wifi module update to new smartconfig API.
...
Needs testing.
2015-10-12 13:26:04 +11:00
38cc84d2fc
Removed gpio pulldown references.
...
The ESP never supported internal pulldowns, and the SDK now matches reality.
2015-10-12 13:26:04 +11:00
f1552605d9
Change os_update_cpu_freq... to ets_update_cpu_freq...
...
Again, the os_xxx version has been removed from the SDK.
2015-10-12 13:26:04 +11:00
d2ac5f1712
Changed os_intr_xxx to ets_intr_xxx.
...
The os_intr_xxx macros no longer exist in the SDK.
2015-10-12 13:26:04 +11:00
3b9a42e254
Updated #includes to work on new SDK.
...
Both "c_types.h" and "lwip/ip_addr.h" don't get included indirectly anymore.
2015-10-12 13:26:04 +11:00
cc220d9201
Moved TEXT_SECTION_ATTR macro to its own header.
2015-10-12 13:26:04 +11:00
8dff84e0a2
Missing file from the LWIP upgrade/import.
2015-10-12 13:26:04 +11:00
c674d191e4
Upgraded open-source LWIP.
...
From Espressif's lwip_open_src_template_proj_for_v1.3.0.zip
2015-10-12 13:26:04 +11:00
c1cd58e096
Build using 1.4.0 SDK + remove old SDK includes/libs.
...
Leaving the linker scripts intact for now, as they're quite customised.
2015-10-12 13:00:38 +11:00
140bcee2e0
comment cleanup
2015-10-08 20:44:19 -07:00
cf079fa333
Basic hx711 functionality
2015-10-08 20:34:24 -07:00
093a895980
Merge pull request #678 from devsaurus/dev-hspi_clockdiv
...
Add divider for arbitrary HSPI clock frequencies, resolves #674
2015-10-06 21:05:17 +02:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
4cf5f37450
address SPI_CLKDIV_PRE requirements
...
* respect N-1
* avoid range overflow
2015-10-04 16:57:50 +02:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
8683ea4f1b
Fixed previous POST patch. Also cleaned up HTTP request handling.
2015-10-01 14:22:45 -04:00
90f770412d
Switched from HTTP GET to HTTP POST.
2015-09-30 14:11:43 -04:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
721fadfd14
Changed SSID to be suffixed by MAC.
2015-09-27 14:02:25 -04:00
a15097659b
Disabled enduser_setup module
2015-09-19 15:22:01 -04:00
cd85e50e73
Added support for connected, error and debug callbacks.
2015-09-19 15:06:56 -04:00
a6c9ba8004
disable UCG module per default
2015-09-17 22:43:59 +02:00
154b456f11
extend ucg example with ST7735 display
2015-09-17 22:37:31 +02:00
db1162015d
prefix local routines in ucg_polygon
2015-09-17 21:53:49 +02:00
a2bca463a0
establish parametrization via ucg_config.h
2015-09-17 21:53:48 +02:00
fde4843a75
implement all remaining function bindings
2015-09-17 21:53:48 +02:00
f0d581223f
UcgLogo example - fix drawGlyph and drawString
2015-09-17 21:53:48 +02:00
5c93ba017e
finish GraphicsTest.lua
2015-09-17 21:53:48 +02:00
ac1b5a1173
extend ucg module
2015-09-17 21:53:48 +02:00
75041a32b5
initial setup of ucg module
...
Hello World example is working
2015-09-17 21:53:48 +02:00
9b384b4bda
fix u8g->ucg prefix
2015-09-17 21:53:48 +02:00
0f1a168525
add ucg module
2015-09-17 21:53:48 +02:00
6dc0dfc068
import ucglib v1.3.3
...
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
8982d370f2
Removed #define for forcing storage on flash
2015-09-17 14:30:46 -04:00
5161081c1c
Updated comment for mqtt.client parameters.
2015-09-15 23:11:20 -06:00
3d5c54cef7
Moved all debug prints into the NODE_DEBUG macro.
2015-09-14 18:43:09 -04:00
3a05c3e402
Moved CONST data to occupy flash, and remove storage instructions for functions.
2015-09-12 12:07:53 -04:00
e2ada487f3
Added ENDUSER_SETUP module.
...
The module will start a SoftAP, DNS, HTTP server acting as a captive portal.
The portal will have the SSID SetupGadget and will serve a website where
credentials for the end users WLAN can be submitted.
Once valid credentials have been submitted and used to connect to the
local WLAN this module will stop.
This module requires USE_DNS to enabled in dhcpserver.h
2015-09-10 18:40:39 -04:00
Johny Mattsson
Johny Mattsson
TerryE
Thomas Soëte
Antoine
dnc40085
Jens Jensen
dnc40085
Vowstar
kvakanet
Jonathan karras
chris
devsaurus
aeprox
Robert Foss
Jonathan Karras