9003d3e8fb
Rework NODEMCU_MODULE() to not pull in extra gunk.
...
Third time lucky. I hope. Hi Terry.
2015-12-18 13:10:48 +11:00
4e8ef87d03
Reworked module registration, removed modules.h
...
Module creation & registration now made a lot simpler. In essence,
each module file is now self-contained and only needs a
NODEMCU_MODULE(MYNAME, "myname", myname_map, luaopen_myname);
line to both be automatically recognised by the Lua initialization
as well as honor the LUA_USE_MODULES_MYNAME #define.
2015-12-16 16:09:16 +11:00
32b2911263
Merge pull request #746 from DiUS/vdd33
...
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
5b00d02bf2
Order modules list alphabetically
2015-11-19 22:48:05 +01:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
307323d1ff
Add luac.cross capability to nodeMCU
2015-11-03 21:37:14 +00:00
a08626d84f
Add minimum debug library providing traceback() and getregistry() functions
2015-11-03 21:34:42 +00:00
a38fbdbf51
Merge pull request #713 from christakahashi/hx711-support
...
Added support for the hx711 load cell ADC.
2015-11-01 14:31:12 +08:00
3e0a3e992e
Merge pull request #717 from karrots/feature/baudrate_define
...
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-11-01 14:30:57 +08:00
66e65bd3c1
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-10-31 19:47:11 -06:00
dffbfacd46
most users won't need this so it should be off be default
2015-10-30 23:31:45 -07:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
afdd9430e0
Removed old lwip include file.
2015-10-12 15:57:24 +11:00
5d5be35633
Upgraded LWIP to 1.4.0 released from Espressif.
...
Plus directly provided patch for user_interface.h.
2015-10-12 14:31:04 +11:00
a161f882ae
Espressif-provided fix for open source LWIP on 1.4.0.
2015-10-12 13:26:05 +11:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
fe6289a6c2
Switch Lua input to event driven instead of polled.
...
The Lua input timer has been the thorn in the side which prevents a lot of
potential sleeping, unnecessarily.
2015-10-12 13:26:05 +11:00
e905c24dcc
Removed unsused, now incompatible SSL code.
2015-10-12 13:26:05 +11:00
21c4e11020
Enable dynamic build dates, plus print SDK version.
2015-10-12 13:26:05 +11:00
7d0b13df81
Bumped version string to stop confusing myself.
2015-10-12 13:26:04 +11:00
3b9a42e254
Updated #includes to work on new SDK.
...
Both "c_types.h" and "lwip/ip_addr.h" don't get included indirectly anymore.
2015-10-12 13:26:04 +11:00
cc220d9201
Moved TEXT_SECTION_ATTR macro to its own header.
2015-10-12 13:26:04 +11:00
8dff84e0a2
Missing file from the LWIP upgrade/import.
2015-10-12 13:26:04 +11:00
c674d191e4
Upgraded open-source LWIP.
...
From Espressif's lwip_open_src_template_proj_for_v1.3.0.zip
2015-10-12 13:26:04 +11:00
cf079fa333
Basic hx711 functionality
2015-10-08 20:34:24 -07:00
093a895980
Merge pull request #678 from devsaurus/dev-hspi_clockdiv
...
Add divider for arbitrary HSPI clock frequencies, resolves #674
2015-10-06 21:05:17 +02:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
a15097659b
Disabled enduser_setup module
2015-09-19 15:22:01 -04:00
cd85e50e73
Added support for connected, error and debug callbacks.
2015-09-19 15:06:56 -04:00
a6c9ba8004
disable UCG module per default
2015-09-17 22:43:59 +02:00
154b456f11
extend ucg example with ST7735 display
2015-09-17 22:37:31 +02:00
a2bca463a0
establish parametrization via ucg_config.h
2015-09-17 21:53:48 +02:00
6dc0dfc068
import ucglib v1.3.3
...
https://github.com/olikraus/Ucglib_Arduino
2015-09-17 21:53:47 +02:00
e2ada487f3
Added ENDUSER_SETUP module.
...
The module will start a SoftAP, DNS, HTTP server acting as a captive portal.
The portal will have the SSID SetupGadget and will serve a website where
credentials for the end users WLAN can be submitted.
Once valid credentials have been submitted and used to connect to the
local WLAN this module will stop.
This module requires USE_DNS to enabled in dhcpserver.h
2015-09-10 18:40:39 -04:00
29ee02f680
Revert version change
2015-08-22 22:34:54 +02:00
6cb90ea924
First commit
2015-08-22 00:15:28 +02:00
ad49c5dd3b
Merge pull request #589 from kbeckmann/pr_bmp085
...
Implemented BMP085 module
2015-08-05 23:21:03 +08:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
0b28056959
Implemented BMP085 module
2015-08-03 17:07:56 +02:00
c19596cae8
Merge pull request #581 from robertfoss/dev
...
Added USE_DNS define.
2015-08-02 23:40:37 +08:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
595509a7f3
More sensible cjson realloc strategy.
2015-07-31 11:36:46 +10:00
5822d4c4ed
Add define for advertising DNS in the DHCP OFFER message.
2015-07-28 16:32:38 +02:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
1bc156e4d1
move display constructors into template-based functions
...
+ uniform generaration
+ addition of further displays
- slight unneccesary heap allocation when display drivers are included but not used
2015-07-16 23:23:43 +02:00
02d473dab0
revert local changes to u8glib
2015-07-16 21:31:00 +02:00
dd38a0a0e6
Imported reworked rtctime support.
2015-07-10 16:16:25 +10:00
09410d55c6
Added SNTP module, for easy time sync.
...
Integrates with the rtctime component if it's available.
2015-07-10 15:12:31 +10:00
67e72c45df
Imported RTC FIFO component + added Lua interface.
...
The rtcfifo module uses RTC memory to store sensor samples across deep-sleeps,
making it possible to batch up samples for less frequent uploads. This
component uses 9 RTC memory slots for control, and a variable number of
slots for sample storage (see rtcfifo.prepare() on how to control the
size/location of the latter).
When used together with the rtctime module, it also exposes the convenience
function rtcfifo.dsleep_until_sample() which can be used to easily take
readings on a regular basis without having to manually take into account
time spent awake to get an accurate sleep time.
The format used for storing samples is quite dense, and allows for 16 bits
of data in a fixed point format (per sample).
2015-07-10 15:12:31 +10:00
2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
f5938dfe17
Will made some modules default off.
...
Need discussion. And turn off some modules by default.
May our community should build more version?
2015-07-04 02:51:41 +08:00
485e5a3140
Disabled WS2801 module
2015-07-03 12:35:47 +02:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
dce0d2c2a8
Release build 20150627.
...
fixed ap/station-ap cannot connect to the device.
added wifi.ap.getconfig().
fixed net.dns.getdnsserver().
added new base64 lua example.
added node.bootreason() to inspect boot cause.
optimization of u8g.
2015-06-27 15:21:48 +08:00
7bd10e8a17
Added node.bootreason() to inspect boot cause.
2015-06-27 12:34:03 +10:00
dda121e5e0
Release 0.9.6-dev_20150625
2015-06-26 18:32:46 +08:00
0c924e56c6
Support for loading sub-32 wide data from irom.
2015-06-23 15:41:14 +10:00
af56aea1e8
Update dhtlib api, support both integer and float version.
2015-06-18 17:19:55 +08:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
b0a4e4d3e9
Changed BUILD_DATE.
2015-06-17 00:16:57 +08:00
d955c8815b
add 433MHz transmission
2015-06-11 18:07:16 -04:00
8044014f96
Merge pull request #471 from nodemcu/dev
...
Merge dev into dev096
2015-06-08 14:04:28 +08:00
223a936779
Switched crypto module to use ROM SHA1/MD5.
...
Also disabled MD2 support by default (see MD2_ENABLE in user_config.h).
2015-06-05 12:12:24 +10:00
06724fbb17
Renamed SHA2 support option to SHA2_ENABLE per request.
2015-06-03 11:20:16 +10:00
2128c42f02
Add headers for discovered rom functions
2015-05-28 15:10:12 -05:00
ca78b9ea2c
Add crypto module initially containing sha1 and base64_encode.
2015-05-28 07:46:57 -05:00
c82cc3f7c5
Testing use all modules.
2015-05-21 10:42:28 +08:00
a1e67c5cf0
Try to use latest spiffs but not success.
2015-05-21 10:39:02 +08:00
71469dd70f
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_version.h
app/modules/node.c
app/modules/wifi.c
2015-05-15 08:13:46 +08:00
bcbde08bf7
fix mqtt keepalive ping, add a example for mqtt in lua_examples.
2015-04-05 02:22:51 +08:00
1c2ee75a00
fix mqtt, do a format when wrong flash size is detected
2015-04-03 00:51:02 +08:00
dcb6e53af7
add auto-reconnect option to mqtt:connect api
2015-03-31 00:36:44 +08:00
09750b5653
add queue to mqtt module
2015-03-30 00:24:09 +08:00
d5731dd9bd
merge from dev
2015-03-20 20:15:38 +08:00
a70709268b
merge cjson and dev to master, make a stable release
2015-03-18 14:22:17 +08:00
a01bda03dd
Merge pull request #294 from nodemcu/json
...
Json branch merged to master
2015-03-18 13:11:11 +08:00
09b650be41
disable untested pcd8544 driver for the moment
2015-03-17 20:52:47 +01:00
808a359eb8
quick fix when wide charactor issue
2015-03-17 22:42:22 +08:00
45e7f270cc
Merge branch 'dev' into json
2015-03-17 00:13:15 +08:00
9c0c960e84
json port from cjson. not work yet
2015-03-16 09:00:33 +08:00
3124bcf357
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-15 22:06:30 +01:00
0b01f28c62
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_modules.h
app/include/user_version.h
2015-03-16 01:13:03 +08:00
4e7473bc00
Fixed flash automatic detection bug. Support 128MBit flash.
2015-03-16 01:05:06 +08:00
0b95ae08a2
default build with coap, reduce coap module mem usage
2015-03-15 20:12:29 +08:00
c46000069d
reduce coap module memory usage
2015-03-15 13:44:50 +08:00
429bf57d67
add pcd8544
2015-03-12 23:09:41 +01:00
b387ba93ec
introduce u8g_config.h
2015-03-12 21:50:57 +01:00
d28a2c9eda
add interger version release, fix #234 , #252 , #246
2015-03-11 13:21:19 +08:00
81ea8d9597
add math, add file.fsinfo(), update spiffs.
2015-03-10 01:12:36 +08:00
8369f74bd0
comment out math.fmod to reduce code size
2015-03-06 17:00:37 +08:00
9d0c733073
Merge branch 'dev' into dev096
2015-03-06 16:46:37 +08:00
45f6abd448
merge coap
2015-03-06 16:24:55 +08:00
13b08cdacf
add macro to control built-in lib for lua, add libm.a
2015-03-06 15:55:24 +08:00
6ea3d6390c
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
...
Conflicts:
app/include/user_config.h
ld/eagle.app.v6.ld
2015-03-06 14:02:58 +08:00
bbef457e50
seperate user_config.h to speed-up compile when modules disabled/enabled
2015-03-06 11:59:04 +08:00
484dbf2683
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 14:51:49 +01:00
8432e8c8be
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 10:20:02 +01:00
37d2c9f6c1
Revert and remove EGC in user_config.h
2015-02-17 23:44:05 +08:00
c05fc843f4
Enable EGC.
2015-02-17 02:25:05 +08:00
05fe3ea9f1
Update to SDK 0.9.6_b1
...
The open source LWIP is broken, use espressif's liblwip.a.
Uses system_get_vdd33 instead of readvdd33.
The espressif's sdk0.9.6 beta1 (2015.02.15) release note
1、Optimize smartconfig to version v0.8；
2、Optimize AT to version 0.22.b1；
1>、Fixed bugs；
2>、Optimize the speed of transparent transmission；
3、Optimize boot to version 1.3(b3)；
1>、Fix compatibility problem of dual flash ；
4、Solve problem of the large current in deep sleep；
5、Fixed problem “check mem fail”；
6、Fixed problem of UDP socket may stop listening broadcast packet after a long time running under some special router；
7、Fixed bug related to wifi_station_scan;
8、Other optimize to make the software more reliable；
2015-02-16 11:37:39 +08:00
655b06b48e
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-13 21:59:34 +01:00
fab1f9560a
revert LUA_BUFFERSIZE to 1024
2015-02-14 02:17:27 +08:00
6e840a453f
add node.compile() api
2015-02-13 15:11:59 +08:00
856b8553bf
comment out ws2812 temporary. remove node.led, node.key
2015-02-12 11:05:28 +08:00
22d096ce7c
Remove PRINTF_LONG_SUPPORT. It is useless now.
2015-02-12 01:23:35 +08:00
c7c88feae4
Add 8M and 16M fixed flash size options.
2015-02-11 21:01:57 +08:00
f2c881db18
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-10 21:40:29 +01:00
7fda5bdf76
Use more powerful UART baudrate list from RTOS driver.
2015-02-10 22:39:50 +08:00
0f09d23714
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-10 22:27:21 +08:00
a9398b1dd4
Merge pull request #196 from Point-less/master
...
Added the hold and unhold methods to tcp socket
2015-02-09 22:17:13 +08:00
929d4aed5c
Added the hold and unhold methods to tcp socket
2015-02-09 03:00:18 -03:00
0fe694b10f
Merge pull request #192 from dereulenspiegel/ws2812
...
Add support for WS2812 based LED strips
2015-02-09 12:39:49 +08:00
0950e48925
Added support for WS2812 LEDs as a new module
2015-02-05 18:40:46 +01:00
cca0de9b39
Align the code of c_math.c
2015-02-05 10:20:20 +08:00
0c9b6f0b6b
re-enable mqtt and ow
2015-02-05 00:02:16 +01:00
82e126eb95
Merge branch 'master' into dev
2015-02-04 22:00:57 +01:00
1740841e4f
fix #175
2015-02-05 01:42:14 +08:00
4754064ecf
add coap module, see fragment.lua for usage
2015-02-05 01:32:57 +08:00
9f0b167832
improve font handling
...
* macros established to build a table of fonts which get compiled into the image
* font data is mapped to irom0 to save dram space
* quirky function to retrieve font data 4-byte aligned from irom0
2015-02-04 00:08:39 +01:00
12a546ce3d
Merge remote-tracking branch 'upstream/master'
2015-02-03 20:49:18 +01:00
f6161230a6
Fixes BIT_RATE typo's so 9600 isn't defined 3 times
2015-02-03 17:47:33 +00:00
d48168b920
Update uart.h
...
Add Baudrate 1200, 2400,4800
2015-02-03 09:26:21 +01:00
a2672113aa
* add u8glib
...
* initializer for SSD1306 display with I2C driver
* disabled mqtt and ow modules to avoid irom0_0_seg overflow
check ld script to increase size
2015-02-01 17:27:19 +01:00
33601462ef
add u8g module stubs
2015-02-01 17:27:19 +01:00
c39deb2a43
Turn floating point option ON.
...
Add pre_build/0.9.5/nodemcu_20150127.bin.
2015-01-26 22:25:43 +08:00
646eaec29c
Fixed LUA_NUMBER_INTEGRAL definition in user_config.h.
2015-01-26 19:57:54 +08:00
2e513a967e
Add floating point support for output.
...
Changed %.14g to %g.
Add c_sprintf definition.
2015-01-26 17:17:04 +08:00
530e964d95
Try to ENABLE floating point, lack %g support.
2015-01-26 04:15:54 +08:00
ad966146fc
migrate to sdk 0.9.5 release version
2015-01-24 23:36:04 +08:00
f676825872
merge mqtt branch to master and build pre_build bin
2015-01-23 11:48:05 +08:00
df3c82391f
add spi, and some minor fix
2015-01-18 11:46:15 +08:00
3c16014641
Add SPI Module
...
* Add SPI support (master mode only)
* Issue #50
2015-01-16 22:41:34 +02:00
617574d441
fix eclipse project
2015-01-09 15:58:39 +08:00
971c4b569b
fix net.socket:send(), fix file.read() when 0xFF reached
2015-01-08 16:03:21 +08:00
b65fb02cc5
add file.format() to rebuild fs system, get more ram back
2015-01-07 15:57:17 +08:00
acd9d0dc97
deep optimizing ram usage
2015-01-07 01:15:38 +08:00
729603fae7
move some buffer to local
2015-01-06 19:01:34 +08:00
cb4a49e0db
Changed Makefile to support Windows xcc.
2015-01-05 13:15:59 +08:00
c04f2578ec
Updated SDK to v0.9.5 and optimized memory.
2015-01-05 10:09:51 +08:00
0420b6d72f
Add definition of NODE_STORE_TYPEDEF_ATTR and NODE_STORE_ATTR.
2015-01-02 17:56:34 +08:00
1b9479a650
Added NODE_STORE_ATTR __attribute__((aligned(4),packed))
2015-01-01 22:22:05 +08:00
65058bfacd
Auto generate BUILD_DATE.
2014-12-31 15:27:27 +08:00
04a5e67443
add node.info() to get version, chipid, flash info
2014-12-31 14:26:51 +08:00
715ff5b7aa
NodeMCU firmware can auto detect flash size now.
2014-12-31 02:47:44 +08:00
4cf5265ccc
deal with uart.on api when required char number is 0
2014-12-30 19:33:54 +08:00
dff406e575
build latest firmware, add pre_build/latest folder
2014-12-26 11:49:39 +08:00
f21908a65d
roll back user_config.h:(
2014-12-23 12:08:32 +08:00
8a40ef40a7
readme GNU toolchain not tested
2014-12-23 11:52:09 +08:00
cdd13b1af3
source file first commit, folder structure refact
2014-12-22 19:35:05 +08:00
Johny Mattsson
Terry Ellison
btsimonh
Marcel Stör
Johny Mattsson
Johny Mattsson
Vowstar
Jonathan karras
chris
devsaurus
Robert Foss
aeprox
Konrad Beckmann
zeroday
Bernd Meyer
vowstar
Orgmar
Mike Wen
=
funshine
Markus Gritsch
Santiago
Till Klocke
Simon John
cle69
iabdalkader