Commit Graph

378 Commits

Author SHA1 Message Date
Florian Festi 2575cc39df Add support for a bayonet mount lid to the RegularBox
Adjust BayonetBox to make the pieces usable from outside
2020-06-23 21:47:08 +02:00
Florian Festi 604ea923af New generator: BasedBox 2020-06-22 19:57:18 +02:00
Florian Festi ea0c9480e1 TriangleLamp: Fix hole position in front 2020-06-16 22:56:01 +02:00
Florian Festi cd884c63bf AngledBox: Add bottom_edge parameter
Also fix bug with non matching finger joints between side walls and
miss alignment of the bottom and top pieces
2020-06-03 21:56:55 +02:00
Florian Festi ecaba08aa6 New generator: DinRailBox 2020-05-29 22:59:15 +02:00
Florian Festi c5a35bd3ec CardBox: Fix typo 2020-05-27 17:27:23 +02:00
Florian Festi baf996764c CardBox: Add building instructions
including a new picture of lid details by https://github.com/bwente
2020-05-26 18:07:17 +02:00
Stefan Schwarz c065e154be Generator for a split Atreus keyboard 2020-05-23 23:28:35 +02:00
Florian Festi c978266906 DividerTray: Fix bottom edge for middle walls 2020-05-22 10:25:55 +02:00
Florian Festi 89805b4804 New generator: SideDoorHousing 2020-05-12 21:54:59 +02:00
Florian Festi 6091cf955f Comsole2: Move to Box group in the UI 2020-05-10 16:13:54 +02:00
Florian Festi 928be1620b UniversalBox: Change default for outset to True
for edge with hinge eye (i) top_edge
2020-05-05 22:03:20 +02:00
Florian Festi 1f2d35082d Console2: Properly name front_height parameter 2020-05-05 18:28:52 +02:00
Florian Festi 0acc9c2a38 Console2: Move back wall latch down
to reduce chance of it conflicting with the front panel
2020-05-05 18:13:03 +02:00
Florian Festi 05a7e02486 Console2: Images, descriptions and parameters for hatches
Add three new parameters: removable_backwall, removable_panel and glued_panel
that control which of the service hatches are present and how to attach
the front panel
2020-05-05 09:44:07 +02:00
Florian Festi 93273f2fc7 Console2: Improve and fix latches 2020-05-02 18:42:36 +02:00
Florian Festi e2d716aeb8 Console2: Fix bottom edge for front and back 2020-05-01 23:49:05 +02:00
Florian Festi d45ccba307 New generator: Console2 2020-05-01 23:36:44 +02:00
Florian Festi 54d4b6bebd Console: Fix x, y confusion 2020-04-29 12:25:46 +02:00
Florian Festi 279b60abc8 New generator: Console 2020-04-28 22:25:47 +02:00
Stefan Schwarz 2f2256ec7d Keypad support for CPG151101S11 hotplug sockets 2020-04-13 20:11:44 +02:00
Florian Festi f961cd533d KeyPad: Improve parameter descriptions 2020-04-13 13:53:38 +02:00
Florian Festi 195c68c28f
Rail holes dist (#213)
* added EurorackSkiff Generator

* fixed holes distribution
2020-03-05 23:09:03 +01:00
Stefan Schwarz 3a14e1796b Generator for keypads with mechanical switches 2020-03-04 20:24:47 +01:00
Florian Festi 80edaf5ac4 New generator: BottleStack 2020-02-29 18:19:59 +01:00
Florian Festi 4c338e1c62 RoundedBox: Add edge_style parameter 2020-02-28 17:52:57 +01:00
Erwin Jansen a0338a559f Add a bottom to the divider tray.
This add support for the generation of a bottom for the divider tray.
The bottom can be generated by passing the --bottom=True flag.

This makes it possible to generate ./static/samples/DividerTray.jpg
2020-02-26 21:00:26 +01:00
Florian Festi eeb1baf352 Gear: don't allow less than 2 teeth 2020-02-01 15:30:53 +01:00
Florian Festi ec9d911142 DividerTray: Use ValueError instead of assert to treat this as wrong user input 2020-02-01 15:17:18 +01:00
Florian Festi 069dd853aa BinTray: limit front parameter 2020-02-01 15:14:12 +01:00
Florian Festi 2121228036 TrayLayout: Error out if tray is just a single wall 2020-02-01 14:51:38 +01:00
Florian Festi 2a7e1e62d1 PaintStorage: Prevent division by zero 2020-02-01 14:31:24 +01:00
Stefan Reichhard 37bff9d358 fixed d3 diameter (mounting screw holes) 2020-01-22 16:11:18 +01:00
Florian Festi 1f3110c6fa New generator: TriangleLamp 2020-01-21 21:34:02 +01:00
Florian Festi e2b87af2a4 UniversalBox: Add outside parameter
Fixes: #144
2019-12-14 19:13:40 +01:00
Florian Festi aba9631b00 Make joints of box sides go to the very bottom
for NotesHolder, TypeTray and UniversalBox.
The same should be done to many other boxes as soon as they get the
bottom_edge parameter

Resolves: #111
2019-12-14 14:18:38 +01:00
Florian Festi c5474e7488 DiscRack: Limit lower_factor and rear_factor to smaller than one 2019-12-14 12:23:08 +01:00
Florian Festi 024b574763 TrayLayout: Add default for layout param 2019-12-14 12:14:24 +01:00
Florian Festi 093e10a3ac AngledBox: Use FingerJointSettings for vertical edges, too 2019-12-06 23:37:22 +01:00
Florian Festi bd1db150c7 New geneator: SpicesRack 2019-11-29 19:58:27 +01:00
Marius Bergmann 9f8b84b3f1 add parameters for banana socket and flipswitch diameters 2019-11-20 11:57:13 +01:00
Marius Bergmann 2c367562a9 remove commented code 2019-11-20 11:57:13 +01:00
Marius Bergmann 90fdf897a9 formatting: whitespace cleanup 2019-11-20 11:57:13 +01:00
Florian Festi c67d1f874c StorageShelf: Add retainer_hole_edge param
to allow strengthening the retainer walls by using an h edge.
Also use a h edge on the bottom retainer wall if selected as bottom_edge.
2019-11-09 23:32:12 +01:00
Florian Festi e8cda89381 StorageShelf: Fix holes for inner vertical walls 2019-11-09 23:31:26 +01:00
Florian Festi 71711baa1a StorageShelf: Add retainer wall
This patch does not add finger joints to the vertical walls to attach the
retainer walls as the walls are likely to be to small to be able to make use
of them. In hte long run they should be added, though.
2019-11-09 17:10:23 +01:00
Florian Festi 0cdc930459 StorageShelf: Change front edge from E to e
This makes the shelf one thickness less deep - as it should be
2019-11-09 16:10:30 +01:00
Florian Festi 923798beb9 SBCMicroRack: Fix dowel diameter 2019-11-07 15:38:16 +01:00
Florian Festi 2860a32360 SBCMicroRack: Comment out unfinished fan parameter 2019-11-07 15:38:16 +01:00
Florian Festi d9c190073b SBCMicroRack: Don't draw bottom fingerholes twice 2019-11-07 15:38:16 +01:00